Kodak ESP C315 Extended User Guide

KODAK ESP C315
All-in-One Printer
Extended User Guide
Eastman Kodak Company
Rochester, NY 14650
© Eastman Kodak Company, 2011
Kodak, EasyShare, ESP, and Perfect Touch are trademarks of Eastman Kodak Company.
Specifications subject to change without notice.
Table of contents
1 Printer Overview
Components.......................................................................................................................................................................1
Control panel.....................................................................................................................................................................2
Home Center Software ..................................................................................................................................................3
Ordering supplies.............................................................................................................................................................3
Configuring printer settings ..........................................................................................................................................4
Setting your printer as the default printer .................................................................................................................5
2 Networking Your Printer
Connecting to a wireless network ...............................................................................................................................6
Before you connect ...................................................................................................................................................6
Connecting to a wireless network using the Wi-Fi Setup Wizard................................................................6
Setting up an IP Address........................................................................................................................................10
Viewing the network configuration...................................................................................................................... 11
Printing the network configuration ......................................................................................................................11
Installing your printer on additional computers on the network................................................................. 12
Connecting to another KODAK All-in-One Printer ........................................................................................ 12
Adding a wireless network connection to a USB-connected computer.......................................................... 13
Changing from USB to a wireless connection .................................................................................................. 13
3 Online Printer Management Tool
Accessing the Online Printer Management Tool ..................................................................................................16
Setting up Cloud Printing............................................................................................................................................. 17
Registering your printer with Google Cloud Print ........................................................................................... 17
Registering your printer with KODAK Email Print Service............................................................................18
4 Handling Paper
Paper types...................................................................................................................................................................... 19
Paper sizes....................................................................................................................................................................... 19
Envelope sizes................................................................................................................................................................ 20
Loading paper ................................................................................................................................................................ 20
Loading plain paper................................................................................................................................................. 21
Loading photo paper ............................................................................................................................................. 22
Loading envelopes...................................................................................................................................................23
www.kodak.com/go/aiosupport i
5 Printing
Printing documents ...................................................................................................................................................... 24
Printing two-sided documents............................................................................................................................ 24
Printing forms...........................................................................................................................................................25
Printing pictures.............................................................................................................................................................26
Printing from a memory card ...............................................................................................................................26
Viewing pictures on a memory card...................................................................................................................27
Finding pictures on a memory card ....................................................................................................................27
Using default settings to print a picture ............................................................................................................28
Changing the settings and printing pictures ....................................................................................................29
Printing panoramic pictures ..................................................................................................................................31
Printing tagged pictures.........................................................................................................................................32
Zooming and cropping pictures...........................................................................................................................33
Transferring pictures to a computer........................................................................................................................ 34
6 Mobile Printing
Printing using Google Cloud Print .............................................................................................................................35
Printing using KODAK Email Print Service..............................................................................................................36
Printing emails, documents, and pictures .........................................................................................................36
Printing pictures from a mobile device ....................................................................................................................37
Printing pictures from an iPhone, iPad, or iPod touch device ......................................................................37
Printing pictures from a BLACKBERRY Device................................................................................................37
Printing pictures from an ANDROID OS Device .............................................................................................38
7 Copying
Copying a document.....................................................................................................................................................39
Using the default settings to copy a document...............................................................................................39
Adjusting the settings and copying a document............................................................................................40
Changing the number of copies of a document ..............................................................................................41
Enlarging or reducing a document ..................................................................................................................... 42
Darkening or lightening a copy ........................................................................................................................... 43
Copying a photograph................................................................................................................................................. 44
Using the default settings to copy a photograph ........................................................................................... 44
Adjusting the settings and copying a photograph ......................................................................................... 45
Changing the number of copies of a photograph........................................................................................... 47
Enlarging or reducing a photograph .................................................................................................................. 48
Darkening or lightening a photograph .............................................................................................................. 49
8 Scanning
Before you begin scanning ......................................................................................................................................... 50
Changing the scan settings for scanning from the printer control panel................................................. 50
Scanning from the computer ......................................................................................................................................53
Scanning multiple pictures simultaneously......................................................................................................53
Scanning from the control panel................................................................................................................................55
ii www.kodak.com/go/aiosupport
Table of contents
9 Maintaining Your Printer
General care and cleaning .......................................................................................................................................... 57
Cleaning the scanner glass and document backing....................................................................................... 58
Replacing ink cartridges ..............................................................................................................................................60
Updating the software and printer firmware......................................................................................................... 63
Updating manually if your printer is connected to a computer with WINDOWS OS.......................... 63
Updating manually if your printer is connected to a computer with MAC OS ......................................64
Monitoring and adjusting printer performance .................................................................................................... 65
Checking ink levels................................................................................................................................................. 65
Resetting factory defaults .................................................................................................................................... 65
Replacing the printhead .............................................................................................................................................. 66
10 Troubleshooting
Basic troubleshooting ..................................................................................................................................................70
Getting help on the Web............................................................................................................................................. 72
Status lights.....................................................................................................................................................................73
Power light.................................................................................................................................................................73
Wi-Fi connectivity LED ..........................................................................................................................................73
11 Product and Safety Specifications
Specifications and features ........................................................................................................................................ 74
Print performance................................................................................................................................................... 74
Photo printing features.......................................................................................................................................... 74
Copy document features ...................................................................................................................................... 74
Copy photo features .............................................................................................................................................. 75
Scanning features ................................................................................................................................................... 75
Paper input tray features ...................................................................................................................................... 75
Ink cartridges ........................................................................................................................................................... 75
Connectivity............................................................................................................................................................. 76
Software support .................................................................................................................................................... 76
Physical specifications .......................................................................................................................................... 76
Warranty................................................................................................................................................................... 76
System requirements............................................................................................................................................. 77
www.kodak.com/go/aiosupport iii
Safety information.........................................................................................................................................................79
Regulatory compliance................................................................................................................................................. 81
FCC statement ......................................................................................................................................................... 81
Canadian statements .............................................................................................................................................82
European compliance statement.........................................................................................................................82
German compliance statement ...........................................................................................................................82
REACH Article 33 declarations............................................................................................................................83
Waste electrical and electronic equipment labeling......................................................................................83
ENERGY STAR® Qualified All-in-One Printer........................................................................................................83
Warranty Information ................................................................................................................................................. 84
Declaration of Conformity...........................................................................................................................................85
iv www.kodak.com/go/aiosupport
1
1
4
6
7
14
10
13
2 3
5
9
11
12
8

Printer Overview

Components

This printer lets you print, copy, and scan pictures and documents.
1 Left paper-edge guide* 8 Memory card slot
2 Paper guard 9 Access door
3 Paper input tray 10 Printhead with ink cartridges installed
4 Scanner glass 11 USB port
5 Scanner lid 12 Power cord connection port
6 Control panel 13 Output tray extender
7 Wi-Fi connectivity LED 14 Paper output tray
*
Right paper-edge guide not shown
www.kodak.com/go/aiosupport 1
Printer Overview
2
3
4
5
6
7
8
9
10
1

Control panel

Feature Description
1 LCD Displays pictures, messages, and menus; lifts for easy viewing
2 Cancel button Stops the current operation and returns to the menu
3 Home button Displays the main menu
4 Navigation buttons Used to navigate menus and scroll through pictures
5 Rotate button Changes the orientation of the displayed picture
6 Start button Begins copying, scanning, printing, maintenance task, and file
transfer
7 Zoom buttons Enlarge or reduce the size of the displayed picture
8 OK button Selects a menu item and allows you to continue with the
current operation
9 Back button Displays the higher level screen in the menu structure
10 Power button Turns the printer on or off
2 www.kodak.com/go/aiosupport

Home Center Software

KODAK Home Center Software is installed with your KODAK All-in-One Printer Software, unless you choose otherwise. The Home Center icon will appear on your desktop.
On a computer with WINDOWS Operating System (OS), you can use Home Center Software to:
• browse, crop, enhance, and edit pictures
• print and scan
•configure your printer
• upgrade to the latest printer software and firmware
• order supplies
• access the KODAK Tips and Projects Center
• access this Extended User Guide
KODAK ESP C315 All-in-One Printer
On a computer with MAC OS, you can use Home Center Software to:
•scan
•configure your printer
• upgrade to the latest printer software and firmware
• order supplies
• access this Extended User Guide

Ordering supplies

You can order ink cartridges, paper, and accessories online.
To order supplies, make sure that your computer is connected to the Internet, then:
1. Open Home Center Software.
2. Select
3. Select the item(s) you want to buy, then follow the on-screen instructions.
Order Supplies (on a computer with WINDOWS OS) or select the To o l s
tab, then click
Order Supplies (on a computer with MAC OS).
www.kodak.com/go/aiosupport 3
Printer Overview

Configuring printer settings

To set or change basic printer settings:
1. Press Home.
2. Press to select Printer Settings, then press OK.
3. Press to select one of the following settings:
Date and Time –Press OK, then press to select Ye a r , Month, Day, Hour, or Minute. – Press or to change the values; press OK when you are done making
changes.
–Press Back to go back to the Printer Settings menu.
Ti me to Low Po we r
To conserve energy, your printer will enter a low power (sleep) mode after being idle for a default delay time of 1 hour. You can increase the delay time to low power (in 0.5 hour increments) up to 4 hours. Increasing the delay time may result in reduced energy savings.
– Press to change the time to energy-saving sleep mode (select from 1 to
4 hours in 0.5 hour increments).
Tagged Images Printing (see Printing tagged pictures, page 32) – Press to select Off or On.
Language –Press OK, press to select a language, then press OK.
Country/Region –Press OK, press to select a country or region, then press OK.
Reset All Settings (see Resetting factory defaults, page 65) NOTE: Resetting factory defaults does not change the date and time,
language, country/region, or network settings.
Printer Info –Press OK to view the Firmware Version number; press OK when you are
done.
4. Press Back to return to the Main Menu.
4 www.kodak.com/go/aiosupport

Setting your printer as the default printer

If you have more than one printer and your all-in-one printer is not the default printer, you may set it as your default printer.
IMPORTANT: For all operating systems, if you connect your printer with a USB cable and
with a wireless connection, your printer may be listed twice. Be sure to select the correct printer. The name of the printer that ends with a plus and four digits (+XXXX) indicates a wireless connection.
For computers with WINDOWS XP OS
KODAK ESP C315 All-in-One Printer
1. Select Start > Control Panel > Printers and Faxes or
Panel > Printers and Faxes
2. Right-click your printer, and select Set as Default Printer.
For computers with WINDOWS VISTA OS
1. Select Start > Control Panel > Hardware and Sound > Printers.
2. Right-click your printer, and select Set as Default Printer.
For computers with WINDOWS 7 OS
1. Select Start > Control Panel > Hardware and Sound > Devices and Printers.
2. Right-click your printer, and select Set as Default Printer.
For computers with MAC OS
When a new printer is installed, it becomes the default printer. If your all-in-one printer is not the default printer:
1. From the dock, open System Preferences.
2. In the Hardware section, click Print & Fax.
3. Select your printer from the drop-down list next to Default Printer.
.
Start > Settings > Control
www.kodak.com/go/aiosupport 5
2

Networking Your Printer

This section explains how to configure your wireless network settings.

Connecting to a wireless network

To connect your printer to an 802.11b/g/n wireless (Wi-Fi) network, refer to the following information.

Before you connect

You need:
• a wireless router.
• to determine whether your wireless router supports Wi-Fi Protected Setup (WPS).
NOTE: If you have specific questions about your router, see your router
manufacturer’s documentation for more information.

Connecting to a wireless network using the Wi-Fi Setup Wizard

You can use the Wi-Fi Setup Wizard on the printer to connect to your wireless network. Use the procedures that is appropriate for your network setup.
Connecting to a non-WPS wireless router
To connect your printer to your wireless network, you need to know the network name, also called the Service Set Identifier (SSID). You can obtain your network name from the wireless router. See the manufacturer's documentation for more information.
If you have enabled security on your network, you also need to know the security string (passphrase or password), which may be a Wired Equivalent Privacy (WEP) or a Wi-Fi Protected Access (WPA/WPA2) passphrase.
Record your network information using the correct uppercase and lowercase letters.
Network Name (SSID): _______________________________________
Security String (case-sensitive): ________________________________
1. Press Home.
2. Press to select Network Settings, then press OK.
3. With Wi-Fi Setup Wizard selected, press OK. NOTE: The Wi-Fi radio turns on when you select Wi-Fi Setup Wizard.
6 www.kodak.com/go/aiosupport
KODAK ESP C315 All-in-One Printer
The Wi-Fi connectivity LED blinks as the printer searches for available wireless networks within range, then displays the list in order of signal strength. For example:
If there are additional networks than can be shown on the LCD, press to view them.
Press to select your network, then press OK.
4. If you don’t see your network in the list, or if you want to change your network,
select
Rescan for Wireless Networks, then press OK.
NOTE: If the name of your network is not listed, make sure your wireless router
is turned on and within range.
5. If your network requires a password, use the LCD keyboard to enter your Security String.
On the control panel, press , , or to select the letters and numbers, using the correct uppercase and lowercase letters. Press OK after each character. When you are finished, select DONE, then press OK
6. When the confirmation message appears, press OK.
www.kodak.com/go/aiosupport 7
Networking Your Printer
When the printer is successfully connected, the Wi-Fi connectivity LED will stop blinking and stay on steadily.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESPC315+0034).
7. If you haven’t yet installed the KODAK All-in-One Printer Software: a. Go to www.kodak.com/go/aiodownloads. b. In the results list, click the link for KODAK All-in-One Printer Software for
either WINDOWS or MACINTOSH Operating System, depending on your computer’s operating system.
c. Follow the on-screen instructions to install the software.
Connecting to a WPS wireless router
If your router supports Wi-Fi Protected Setup (WPS), you can use WPS Connect. WPS lets you configure your printer for a wireless network by pressing buttons or entering a PIN.
To connect to a network using WPS:
1. Press Home.
2. Press to select Network Settings, then press OK.
3. With Wi-Fi Setup Wizard selected, press OK. NOTE: The Wi-Fi radio turns on automatically when you select Wi-Fi Setup
Wizard.
4. With WPS Connect selected, press OK.
8 www.kodak.com/go/aiosupport
KODAK ESP C315 All-in-One Printer
5. Select one of two methods of connecting:
IMPORTANT: Before you press OK on the printer, make sure you know where the
router's push button is, or where to enter the generated PIN. If necessary, consult your Internet service provider or router device manufacturer’s documentation for more information.
Pressing a button Entering a PIN
NOTE: You will have two minutes to
press or select the WPS button. It may be a button on the device or a virtual button in the device’s software.
a. With Push Button Configuration
selected, press OK.
b. Press or select the WPS button for
your wireless router.
a. Press to select Generate
WPS PIN, then press OK.
b. In your wireless router’s software,
locate the PIN screen.
c. Enter the PIN you received on the
LCD into the PIN screen.
6. When the confirmation message appears, press OK.
When the printer is successfully connected, the Wi-Fi connectivity LED stops blinking and stays on steadily.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESPC315+0034).
7. If you haven’t yet installed the KODAK All-in-One Printer Software: a. Go to www.kodak.com/go/aiodownloads. b. In the results list, click the link for KODAK All-in-One Printer Software for
either WINDOWS or MACINTOSH Operating System, depending on your computer’s operating system.
c. Follow the on-screen instructions to install the software.
www.kodak.com/go/aiosupport 9
Networking Your Printer

Setting up an IP Address

IMPORTANT: You should only need to set up an IP Address for your printer if you are
All IP Address entries have the following format: 000.000.000.000. Within each three-digit grouping, the number must be right-justified. If an address or subnet mask has only one or two characters between the periods, include one or two leading zeros in front of that number. For example:
having a problem with connecting. Typically, it is not necessary to set up an IP Address. This procedure is for advanced users who know how to obtain the IP Address for the printer.
The address as it may appear in your documentation
149.89.138.149 149.089.138.149
149.2.40.149 149.002.040.149
How to enter the address in the printer menu
To set up your IP Address on the printer:
1. Press Home.
2. Press to select Network Settings, then press OK.
3. Press to select Advanced IP Address Setup, then press OK.
4. Press OK again to continue.
5. Select one of the following, then press OK:
Dynamic (DHCP)
Manual (Static)
6. If you selected Manual (Static), you are prompted to enter an IP Address, a Subnet Mask, a Gateway Address, and a DNS Server address. Press OK after each entry. Use the navigation buttons to enter each digit of the numbers.
Consult your Internet service provider or network administrator for more information.
10 www.kodak.com/go/aiosupport

Viewing the network configuration

To view the network configuration and verify that you are connected to your wireless network:
1. Press Home.
2. Press to select Network Settings, then press OK.
3. Press to select View Network Configuration, then press OK. The wireless or Ethernet network settings appear on the LCD, including:
• Printer Hostname
• Connection
• Speed
• IP Address
• IP Address Type
• Network Subnet
• Connected Network SSID
•Security
• Authentication
• Channel
•Region
• Radio (on/off)
• MAC Address If the printer is connected to your network, you will see the network name and
the word CONNECTED.
4. To scroll through the information, press .
5. When you are done, press OK.
KODAK ESP C315 All-in-One Printer

Printing the network configuration

To print the current network configuration:
1. Load plain paper into the printer. (See Loading plain paper, page 21.)
2. Press Home.
3. Press to select Network Settings, then press OK.
4. Press to select Print Network Configuration, then press OK.
www.kodak.com/go/aiosupport 11
Networking Your Printer

Installing your printer on additional computers on the network

To add your printer to another computer(s) on your network, install the KODAK All-in-One Printer Software on each computer.
1. Go to www.kodak.com/go/aiodownloads.
2. In the results list, click the link for KODAK All-in-One Printer Software for either WINDOWS or MACINTOSH Operating System, depending on your computer’s operating system.
3. Follow the on-screen instructions to install the software.

Connecting to another KODAK All-in-One Printer

If you are connecting to a newer model printer (for example, you have an ESP 7 printer and now you are adding an ESP C315 printer), you must install the software for the newer model.
NOTE: When you install the new software, the printer driver for the ESP 7 printer
will be uninstalled, and an upgraded driver for the ESP 7 printer will be installed in addition to the driver for the ESP C315 printer.
On a computer with WINDOWS OS:
1. Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility.
• If your wireless all-in-one printer (example: KodakESPC315+0034) is not
listed: a. Select No, my printer is not listed, then click Next. b. From the drop-down list, select your printer. c. Select Network - Wireless/ Wi-Fi, then click Next.
When your printer is detected, driver installation begins.
• If your wireless all-in-one printer (example: KodakESPC315+0034) is listed:
a. Highlight the all-in-one printer that is connected to your network. b. Select Yes, my printer is listed, then click Next.
When your printer is detected, driver installation begins.
2. When driver installation is complete, click Done.
On a computer with MAC OS:
1. Select Apple > System Preferences.
2. Under Hardware, select Print & Fax.
3. In the Print & Fax dialog box, click +.
4. Select your printer from the list, then click Add.
12 www.kodak.com/go/aiosupport
KODAK ESP C315 All-in-One Printer

Adding a wireless network connection to a USB-connected computer

You can change the way you connect to your printer at any time.

Changing from USB to a wireless connection

To change the printer connection type from USB to a wireless (Wi-Fi) network:
If your printer is connected to a computer with WINDOWS OS:
1. Unplug the USB cable from your printer and computer.
2. On the printer control panel, press Home.
3. Press to select Network Settings, then press OK.
4. Press to select View Network Configuration, press OK, then confirm
IP Address is not 0.0.0.0.
5. If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network, page 6.
6. Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility.
• If your wireless all-in-one printer (example: KodakESPC315+0034) is not
listed: a. Select No, my printer is not listed, then click Next. b. Select your printer from the list. c. Select Network - Wireless/Wi-Fi, then click Next.
When your printer is detected, driver installation begins.
• If your wireless all-in-one printer (example: KodakESPC315+0034) is listed:
a. Highlight the all-in-one printer that is connected to your network. b. Select Yes, my printer is listed, then click Next.
When your printer is detected, driver installation begins.
7. When driver installation is complete, click Done.
that the
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESPC315+0034).
www.kodak.com/go/aiosupport 13
Networking Your Printer
If your printer is connected to a computer with MAC OS:
1. Unplug the USB cable from your printer and computer.
2. On the printer control panel, press Home.
3. Press to select Network Settings, then press OK.
4. Press to select View Network Configuration, press OK, then confirm
IP Address is not 0.0.0.0
.
that the
5. Select Apple > System Preferences.
6. Under Hardware, select Print & Fax.
7. In the Print & Fax dialog box, click +.
8. Select your printer from the list, then click Add.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakESPC315+0034).
14 www.kodak.com/go/aiosupport
3

Online Printer Management Tool

The Online Printer Management Tool lets you access your printer through an Internet browser (such as INTERNET EXPLORER, FIREFOX, SAFARI, CHROME) on any computer that is on the same network as your printer.
IMPORTANT: Your computer and your printer must be on the same wireless network. The
Online Printer Management Tool is not available if your printer is connected to a computer with only a USB cable.
With the Online Printer Management Tool, you can:
• view printer status
• set up accounts for Google Cloud Print and KODAK Email Print Service
www.kodak.com/go/aiosupport 15
Online Printer Management Tool

Accessing the Online Printer Management Tool

Access the Online Printer Management Tool in one of the ways described below.
Directly from Home Center Software v7.x or higher:
1. Open Home Center Software.
2. Select Printer Tools on a computer with WINDOWS OS, or Tools on a computer with MAC OS.
3. Make sure that the name of your wirelessly connected printer appears in the bottom left of the window.
NOTE: A wirelessly connected printer is listed as the name of the printer plus a
number (for example, KodakESPC315+0034). If a different printer name appears, click Select, then choose your wirelessly connected printer.
4. Under Online Printer Tools, select Online Printer Management. The Online Printer Management Tool opens.
On any printer-supported computer:
1. Get the IP Address of your wirelessly connected printer: a. On your printer control panel, press Home. b. Press to select Network Settings, then press c. Press to select View Network Configuration, then press OK. NOTE: If you prefer a printout, press to select Print Network Configuration,
then press xxx.xxx.xxx.xxx.
OK. A Test Page prints, including the IP Address in the format
OK.
d. Press to see the IP Address in the format xxx.xxx.xxx.xxx. (See Viewing the
network configuration, page 11.)
2. On your computer, open your preferred Internet browser (such as INTERNET EXPLORER, FIREFOX, SAFARI, CHROME).
3. Type the printer IP Address in the browser address (URL) bar, then press Enter. The Online Printer Management Tool opens.
16 www.kodak.com/go/aiosupport

Setting up Cloud Printing

Registering your printer with Google Cloud Print

Your printer lets you print from anywhere in the world from your smartphone, tablet, or computer that uses Google Cloud Print enabled apps. You must register your printer with a Google Account to enable this feature.
1. Make sure your printer and computer are connected to the same network (see
Networking Your Printer, page 6).
2. Make sure you have the latest version of Home Center Software and printer firmware (see Updating the software and printer firmware, page 63).
3. Do one of the following: NOTE: After you select Cloud Printing Setup, the Online Printer Management
Tool opens in your Web browser.
• Open Home Center Software, then click Cloud Printing Setup.
• Depending on your Operating System, use the path below to select Cloud
Printing Setup. –WINDOWS XP OS: Select Start > Programs > Kodak > KODAK AiO
Printer Tools, then click Cloud Printing Setup.
– WINDOWS VISTA and 7 OS: Select WINDOWS icon > All Programs >
Kodak > KODAK AiO Home Center > Printer Tools, then click Cloud Printing Setup.
–MAC OS: Select KODAK AiO Home Center > Tools, then click Cloud
Printing Setup.
4. Follow the on-screen instructions.
5. In the Google window, click Finish printer registration.
6. Return to the Online Printer Management Tool.
7. Wait until you see a few minutes.
8. To register your printer with KODAK Email Print Service, and get an email address for your printer, go to step 3 of Registering your printer with KODAK
Email Print Service, page 18).
9. Sign out of your Google Account and close the Online Printer Management Tool.
Registration Successful for Google Cloud Print. This may take
KODAK ESP C315 All-in-One Printer
For information about printing, see Printing using Google Cloud Print, page 35.
www.kodak.com/go/aiosupport 17
Online Printer Management Tool
Editing a Google Cloud Print Account
Once you have successfully registered your printer with Google, you can make edits to various fields.
1. Open the Online Printer Management Tool (see Accessing the Online Printer
Management Tool, page 16).
2. Select the Settings tab.
3. Select Cloud Printing > Google Cloud Print.
4. Click Edit Settings.
5. Make the changes you want in the appropriate fields, then click Save.

Registering your printer with KODAK Email Print Service

KODAK Email Print lets you send emails and attachments to your printer using any email account. Your printer must be registered to Google Cloud Print before you can register to KODAK Email Print (see Registering your printer with Google Cloud Print,
page 17).
1. Go to www.kodakeprint.com.
2. Sign in with the account you used to set up Google Cloud Print (see Registering
your printer with Google Cloud Print, page 17).
3. Click Get Printer Email Address for KODAK Printer.
4. Click Enable next to your printer.
5. Make sure you have letter or A4 size paper loaded in the printer. A page will be sent to your printer to indicate your printer has been successfully
set up. (This may take a few minutes.) The page includes the email address of your printer.
6. To limit who can send emails to your KODAK Printer email address: a. Next to Access Control, click Edit. b. Select Control who can send email (by email or domain). c. To add a specific email address, click Add new Email/Domain. d. Type the correct information for the email or domain, then click Save.
NOTE: To delete an email or domain, click Delete.
For information about printing, see Printing using KODAK Email Print Service,
page 36.
18 www.kodak.com/go/aiosupport
4

Handling Paper

Paper types

For the best document printing results, use KODAK Document Papers or a paper with the COLORLOK Technology logo on the package. Use only paper that is designed for inkjet printers.
For the best photo printing results, use KODAK Photo Papers, which are optimized to work with KODAK All-in-One Printers, or photo papers designed for use on pigment-based inkjet printers.
When handling photo paper:
• Hold the paper by the edges; avoid placing your fingerprints on it.
• Do not touch the glossy side of photo paper.
• Store paper flat, away from direct sunlight and heat.
You can use:
• Plain paper — 16 to 24 lb / 60 to 90 gsm
• Photo paper — up to 12 mils
• Card stock — 110 lb / 200 gsm, max
• Envelopes — most standard types
• Labels — all commercially available inkjet varieties on 8.5 x 11-in. or A4 sheets
• Iron-on transfers — all commercially available inkjet varieties on 8.5 x 11-in. or A4 sheets

Paper sizes

The printer accepts the following paper sizes:
• 4 x 6 in. / 10 x 15 cm
• 4 x 7 in. / 10 x 18 cm
• 4 x 8 in. / 10 x 20 cm
• 4 x 12 in. / 10 x 31 cm
• 5 x 7 in. / 13 x 18 cm
• 7.3 x 8.5 in. / 18 x 22 cm
• 7.3 x 10.5 in. / 18 x 27 cm
• 8 x 10 in. / 20 x 25 cm
• 8.5 x 11 in. / 22 x 28 cm
• 8.5 x 14 in. / 22 x 36 cm
• A4 (8.3 x 11.7 in. / 21 x 30 cm)
• A5 (5.8 x 8.3 in. / 15 x 21 cm)
• A6 (4.1 x 5.8 in. / 11 x 15 cm)
• B5 (6.9 x 9.8 in. / 18 x 25 cm)
NOTE: Do not load paper smaller than 4 x 6 in. / 10 x 15 cm.
www.kodak.com/go/aiosupport 19
Handling Paper

Envelope sizes

Loading paper

The printer accepts the following envelope sizes:
• C5 (6.7 x 9 in. / 16 x 23 cm)
• C6 (4.5 x 6.4 in. / 11 x 16 cm)
• DL (4.3 x 8.7 in. / 11 x 22 cm)
• US #7¾ (3.9 x 7.5 in. / 10 x 19 cm)
• US #9 (3.9 x 8.9 in. / 10 x 23 cm)
• US #10 (4.1 x 9.5 in. / 11 x 24 cm)
IMPORTANT: Do not load envelopes with cutout or clear windows.
To load paper:
1. Lift the input tray.
2. Open the output tray, then pull out the extender until it is fully extended.
20 www.kodak.com/go/aiosupport

Loading plain paper

KODAK ESP C315 All-in-One Printer
The input tray capacity is 100 sheets of plain paper.
To load plain paper:
1. Fan and stack the paper.
2. Make sure the left and right paper-edge guides are in the far left and far right positions, then insert the paper into the input tray.
3. Move the paper-edge guides until they touch the paper.
www.kodak.com/go/aiosupport 21
Handling Paper

Loading photo paper

The input tray capacity is 20 sheets of photo paper.
To load photo paper:
IMPORTANT: Always load the paper short side first. The printer automatically detects
1. Remove any paper from the input tray.
2. Insert the paper (short side first) into the center of the input tray with the
side toward the tray
and the glossy side toward you.
the orientation of the picture, whether it’s portrait or landscape, and prints accordingly. If the photo paper is loaded in the wrong direction, the image will be cut off and the paper may jam. If the paper is loaded with the wrong side up, the image quality will be affected.
3. Move the paper-edge guides until they touch the paper.
logo
22 www.kodak.com/go/aiosupport

Loading envelopes

KODAK ESP C315 All-in-One Printer
The input tray capacity is 20 envelopes.
IMPORTANT: Do not load envelopes with cutout or clear windows.
To l o ad e n ve l o pe s:
1. Remove any paper from the input tray.
2. Insert the envelope(s) into the tray with the flap away from you and the top of the envelope against the right side of the tray.
3. Move the paper-edge guides until they touch the envelope(s).
www.kodak.com/go/aiosupport 23
Loading...
+ 66 hidden pages