KLIM Pulse Bluetooth Earphones
USER MANUAL
Get Started
Learn more about KLIM Pulse Bluetooth Earphones
Features and Specications
• In-ear Bluetooth Stereo earphones
• Bluetooth V4.1
• Snapshot function compatible with Android 3.0/iOS
5.0 or above
• Battery status display on iOS
• Operating range of more than 10m
• Standby Time: 200 hours
• Work Time: 6 hours
• Operating Frequency: 2401 MHz - 2479 MHz
• Connects with 2 Bluetooth devices at the same time
Volume Up/Next
Turn on/Pairing mode/
Play/Pause/Turn Off/Answer
1
How to Use
Micro USB Charger
1. L & R Orientation
call/End call/Reject
call/Last number redial
Volume
Down/Previous/Mute call
Snapshot
LED Indicator
Controller on Right side
Mic
2. Choose the correct size earbud for a perfect t
2
3
3. General Function
We love great sound. Make sure you hear it.
Because everyone's ears are different, be sure to try all
sizes of earbuds.
Only by choosing the appropriate size earbuds will you
enjoy comfort and premium sound quality.
Operation
Power on
Power off
Pairing
Standby
Led Status
Blue LED ashes 2 times
Red LED ashes 2 times
Red LED & Blue LED ash alternately
Blue LED ashes 1 time every 12 seconds
L S
4
Incoming call
Low baery
Charging
Blue LED ashes continuously
Red LED ashes 3 times every 20s
Red LED remains on during charging
Blue LED ashes once charging is nished
5
4. Basic Buon Operations
End call: Short press multifunction button to end call.
Reject call: Long press the multifunction button for
Power on: Press multifunction button for 4 seconds.
Blue LED ashes 2 times. Earphones turn on.
Power off: Press multifunction button for 4 seconds.
Red LED ashes 2 times. Earphones turn off.
Volume adjust: Each press on “Volume up” or “Volume
down” buttons, one level of volume changes. When
Volume reaches Max or Minimum. “Tick” reminding sound
occurs.
2 seconds to reject a call.
Last number redial: in standby mode,continuously press
earphone multifunction button twice to redial the last
number.
Snapshot: Short press the “Snapshot” button can
achieve snapshot action.
Baery Status: When earphones connect to iOS
devices show the headphone battery power status on
Play/Pause: Short press multifunction button to pause
music. Press it again, music continues.
Previous: in standby mode, Long press 2 seconds
“Volume down” button, track skips back.
Next: in standby mode, Long press 2 seconds
“Volume up” button, track skips forward.
Answer call:Short press multifunction button
to answer the phone call.
6
the upper right hand corner.
Charging: New earphones have enough power for pairing
and dialing out multiple times.When battery is low,
please charge via USB cable for 2 hours. Red LED
remains on during charging, when blue LED is
on this means charging is complete.
7
5. Pairing (One pair of earphones supports connecting 2
devices)
IMPORTANT: For the 1st pairing press the power button
for 7 seconds (even once the device is on).
Pairing with a phone or other device: (1) Make sure the
headphone is powered off. (2) Press and hold the
multifunction button for 7 seconds to enter pairing
Pairing with 2 phones or other devices at the same
time: These earphones can support 2 device
multi-connection. It can pair with 2 mobile phones
simultaneously, taking the call from either. (1) After
completing pairing with the rst phone, turn off the
rst phone and the earphone in sequence, then re-do
the pairing procedure with another phone. (2) Once
nished the pairing, restart the rst phone and nd the
mode. (3) Red LED & Blue LED ashes alternately,
activate your phone or device’s Bluetooth function and
search for earphones. (4) From the list of found devices
on your mobile phone, select the headphone “KLIM
Pulse” to connect to it. (5) Follow the instructions and
enter “0000” as PIN if the mobile phone asks you to do
so. (6) The earphones or device can be used to play
your phone music or dial a call, etc.
earphones “KLIM Pulse” in the bluetooth list to connect
to it, then two phones can use with there earphones at
the same time.
8
6. Warning
1. You must charge the earphones with the Micro USB
charger cable provided, if you use any other charger it
may damage your earphones, should you do so it is at
9
7. Information
1. The ear tends to enjoy familiar sound, which means
that when you get new earphones you may not like the
sound at rst. We strongly advise you to give it 30
your own risk.
2. You must charge the earphones if they have not been
used for more than 12 months.
3. The earphones contain a magnet therefore it is
advised to seek medical advice should you have a
pacemaker or wear an ICD.
minutes and you should enjoy this new sound.
2. Some devices might recognize the earphones as a
keyboard. If this happens, go to Settings > Bluetooth,
click on the icon beside KLIM Pulse and uncheck the
option “Input Device”.
10
11
Loading...