KitchenAid KSSS36FKB, KSSP48QKS, KSSP42QKS, KSSP36QKS, KSSC48QKS Dimension Guide

®

Built-in Refrigerators, Side by Side and Bottom Mount

PRODUCT MODEL NUMBERS

OVERALL DIMENSIONS

KBLC36FK

KSSC36QK

KSSP48QK

Front view

Side view (all models)

KBLP36FK

KSSC42FK

KSSS36FK

Side by Side

Bottom Mount

1

251/8"

KBLS36FK

KSSC42QK

KSSS36QK

(64 cm)

231/2"

KBRC36FK

KSSC48FK

KSSS42FK

(60 cm)

KBRP36FK

KSSC48QK

KSSS42QK

KBRS36FK

KSSP36QK

KSSS48FK

KSSC36FK

KSSP42QK

KSSS48QK

2

24"

(61 cm)

1 8

831/8"

831/8"

83 / "

(211 cm)*

Electrical: A 115-volt, 60-Hz, AC-only, 15or 20-

(211 cm)

(211 cm)

ampere, fused, electrical supply is required. A

time-delay fuse or circuit breaker is recommended.

It is recommended that a separate circuit serving

only this appliance be provided.

3

Water Supply: Use only 1/4" copper tubing for

31/2" (9 cm)*

water line. Water line to refrigerator must provide

A

361/4" (92 cm)

1. 25-1/8" (64 cm) dimension is to front of top grille.

15-100 psi water pressure.

(see chart following)

2. Power cord (24 in. [61 cm])

Width of Refrigerator:

3. 5 ft. (1.5 m) water line tubing taped to back

Model

Width A (above)

Top

A

Model

Width A

36 in. (91 cm)

36-1/4 in. (92 cm)

42 in. (106 cm)

42-1/4 in. (107 cm)

view

251/8"

36 in. (91 cm)

35 in. (89 cm)

48 in. (122 cm)

48-1/4 in. (123 cm)

(64 cm)

42 in. (106 cm)

41 in. (104 cm)

48 in. (122 cm)

47 in. (119 cm)

DOOR SWING DIMENSIONS

CABINET OPENING DIMENSIONS

A

Side by Side

C

F

E

			B					D	Bottom Mount		23"
											(58 cm)
			2		90˚
						110˚					51"
1	80" - 90"					130˚
						90˚					(130 cm)
	(203-229 cm)
			4"			110˚
						130˚
		(10.2 cm)
											59"
					36"	42"	48"	Location must			(150 cm)
			A	36-1/16" (92 cm)		38" (97 cm)	40" (102 cm)	permit doors to		90˚
			B	38-1/2" (98 cm)		41" (104 cm)	43-1/2" (110 cm)	open to 90° min.		130˚
								Allow 4-1/2 inch
			C	40" (102 cm)		42-9/16" (108 cm)	45-1/4" (115 cm)
	831/4" (211.5 cm) min.							min. space
	843/4" (215 cm) max.		D	43-1/2" (110 cm)		47" (119 cm)	50-1/2" (128 cm)	between
	to bottom of solid soffit.*		E	19-3/4" (50 cm)		23-1/4" (59 cm)	26-3/4" (68 cm)	refrigerator side
			F	14-1/2" (37 cm)		17-1/2" (44 cm)	19-3/4" (50 cm)	and corner wall.
			77"				ANTI-TIP REQUIREMENTS
			(196 cm)
			Width of Opening:
		A	Model		Width A (above)			1	2	The solid soffit must be within 1 in.
										(2.5 cm) maximum above the
		Width
			36 in. (91.4 cm)		35-1/2 in. (90.2 cm)					refrigerator. If the solid soffit is higher
		(see chart following)
										than 1 in. (2.5 cm) or one is not
			42 in. (106.7 cm)		41-1/2 in. (105.4 cm)
			48 in. (121.9 cm)		47-1/2 in. (120.7 cm)					available, prevent the refrigerator from
			6"						3	tipping during use as shown.
		(15.2 cm)								Locate the board(s) so the bottom
										surface of the board(s) are 84 in.
								2" (5 cm)		(213 cm) from the floor.
										Securely attach one or two 2 in. x 4 in. x
	3" (7.6 cm)		3							32 in. (5 cm x 10 cm x 81 cm) wood
										boards to wall studs behind refrigerator.
		11"
										Use 6 - #8 x 3 in. (7.6 mm) (or longer)
	231/2"	(28 cm)	4							wood screws. The wood screws must
	(60 cm) min.	6"	6"							be screwed into the studs at least
		(15.2 cm)								1-1/2 in. (3.8 cm). The board(s) must
			(15.2 cm)					4
										overlap the compressor cover.

1.Stud location

2.Grounded electrical outlet location

3.Recommended water shutoff valve location

4.Plumbing hole and water line location (wall or floor)

1.Center board 1/4 in. (6 mm) max. above refrigerator

2.Two, 2 in. x 4 in. x 32 in. (5 cm x 10 cm x 81 cm) boards

3.Attach to studs with 6 -#8 x 3 in. (7.6 cm) screws

4.Compressor cover

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. 2266877
Instructions packed with product. Specifications subject to change without notice.	04-17-03