KitchenAid KHBC10, 5KHB208, KHBC208, 5KHBC10 Series, KHBC210 Series Manual
...
KHBC10WER
5KHBC10WER
CMD + SHIFT CLICK TO CHANGE COPY CMD + SHIFT CLICK TO CHANGE COPY
Use this attachment with:
Dieses aufsatzteil verwenden mit:
Utilisez cet accessoire avec :
Utilizzare questo accessorio con:
KHBC208, 5KHB208
KHBC210, 5KHB210
KHBC212, 5KHB212
Commercial Immersion Blender
Industrieller Pürierstab
Mélangeur à main commercial
frullatore ad immersione per uso commerciale
Use for pancake batter, mayonnaise, egg
whites, pudding, whipped cream.
Verwenden für pfannkuchenteig, majonäse,
eiweiß, pudding, schlagsahne.
Utiliser pour pâte à crêpe, mayonnaise,
blancs d’œuf, pâtisserie, crème fouettée
Uso per impasto per pancake, maionese,
albumi, pudding, panna montata
For additional details and information, see the
“Commercial Immersion Blender Instructions” manual.
Ausführliche Details und Informationen können der
„Pürierstab-Bedienungsanleitung“ entnommen werden.
Pour plus de détails et d’informations, consultez le manuel
“Mode d’emploi du mélangeur à main commercial”.
Per ulteriori dati e informazioni, vedere le “Istruzioni per l’uso
del frullatore ad immersione per uso commerciale”.
2
WHISK ATTACHMENT
Using your whisk attachment
1
4 5
Care and cleaning
2
LOWHIGH
3
For Food Service Applications: Wash, rinse, and sanitize
the stainless steel portion of the Immersion Blender
prior to initial use, after each use, or whenever it will
not be used again within a period of 1 hour.
The following washing, rinsing, and sanitizing solutions
(or their equivalents) may be used.
Solution Product Dilution in Water Temperature
Washing Noble Pan Pro 1 1 oz. / 3 gallons
Rinsing Plain Water Warm 35ºC (95ºF)
Sanitizing Clorox
In appl ications requiring repetitive use , frequent cle aning will prolong life.
®
Institutional
Bleach
(30 milliliters /
11.4 liters)
1 Tbsp / gallon
(14.8 cc / 3.8 liters)
Hot 46ºC (115ºF)
Cold 10-21ºC
(50-70ºF)
1.
Remove attachment from motor body. Rinse any food residue under running water.
2.
Scrub the attachment using a soft sponge. Rinse both interior and exterior sections
of the attachment, removing as much stuck on soil as possible.
3.
Using a soft sponge dampened in wash solution, wipe down attachments, getting into
all areas of the attachment. Assemble attachment to motor body; place in a container
with wash solution, immersing ¾ of the attachment. Run unit on high for 2 minutes.
4.
Repeat step 3 using clean rinse water in place of wash solution.
5.
Repeat step 3 using sanitizing solution in place of wash solution.
6.
Do not rinse after sanitizing. Allow to air dry before using.
3
Loading...