Kia Rio5 2016 Owner's Manual
Kia, THE COMPANY
Thank you for becoming the owner of a new Kia vehicle.
As a global car manufacturer focused on building high-quality, value
for money prices, Kia Motors is dedicated to providing you with a
customer service experience that exceeds your expectations.
All information contained in this Owner’s Manual was accurate at the
time of publication. However, Kia reserves the right to make changes
at any time so that our policy of continual product improvement can
be carried out.
This manual applies to all Kia models and includes descriptions and
explanations of optional as well as standard equipment. As a result,
you may encounter material in this manual that is not applicable to
your specific Kia vehicle.
Drive safely and enjoy your Kia!
Foreword
Thank you for choosing a Kia vehicle.
When you require service, remember that your Kia Dealer
knows your vehicle best. Your dealer has factory-trained technicians, recommended special tools, genuine Kia replacement
parts and is dedicated to your complete satisfaction.
Because subsequent owners require this important information
as well, this publication should remain with the vehicle if it is
sold.
This manual will familiarize you with operational, maintenance and safety information about your new vehicle. It is supplemented by a Warranty and Consumer Information manual
that provides important information on all warranties regarding
your vehicle.
We urge you to read these publications carefully and follow the
recommendations to help assure enjoyable and safe operation
of your new vehicle.
Kia offers a great variety of options, components and features
for its various models. Therefore, some of the equipment
described in this manual, along with the various illustrations,
may not be applicable to your particular vehicle.
The information and specifications provided in this manual
were accurate at the time of printing. Kia reserves the right to
discontinue or change specifications or design at any time
without notice and without incurring any obligation. If you
have questions, always check with your Kia dealer.
We assure you of our continuing interest in your motoring
pleasure and satisfaction in your Kia vehicle.
© 2015 Kia MOTORS AMERICA, Inc.
All rights reserved. May not be reproduced or translated in
whole or in part without the written consent of Kia MOTORS
AMERICA, Inc.
Printed in Korea
i
Introduction
How to use this manual / Fuel requirements / Vehicle break-in process /
Vehicle data collection and event data recorders / Indicator symbols on the instrument cluster
1
table of contents
Your vehicle at a glance
Exterior overview / Interior overview / Instrument panel overview / Engine compartment
Safety features of your vehicle
Seats / Seat belts / Child restraint system / Air bag
Features of your vehicle
Keys / Door locks / Trunk / Windows / Hood / Fuel filler lid / Sunroof / Steering wheel / Mirrors /
Instrument cluster / Lighting / Wipers & Washers / Climate control system / Audio system / Etc.
Driving your vehicle
Before driving / Engine start/stop button / Transaxle / Brake system / Cruise control system /
Active ECO system / Winter driving / Vehicle load limit / Etc.
What to do in an emergency
Road warning / Emergency while driving / Emergency starting / Engine overheat / TPMS / Flat tire / Towing / Etc.
Maintenance
Engine compartment / Maintenance service / Engine oil / Engine coolant / Brake fluid / Washer fluid /
Parking brake / Air cleaner / Wiper blades / Battery / Tire and wheels / Fuses / Light bulbs / Etc.
Specifications, Consumer information and Reporting safety defects
Index
2
3
4
5
6
7
8
I
ii
Introduction
How to use this manual. . . . . . . . . . . . . . . . . . . . . . 1-2
Fuel requirements . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
• Gasoline containing alcohol and methanol . . . . . . . . 1-3
• Do not use methanol. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
• Fuel Additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
• Operation in foreign countries . . . . . . . . . . . . . . . . . . 1-5
Vehicle break-in process . . . . . . . . . . . . . . . . . . . . . 1-5
Vehicle data collection and event data recorders . 1-6
1
Introduction
HOW T O USE THIS MANUAL
We want to help you get the greatest
possible driving pleasure from your
vehicle. Your Owner’s Manual can
assist you in many ways.We strongly recommend that you read the
entire manual. In order to minimize
the chance of death or injury, you
must read the WARNING and CAUTION sections in the manual.
Illustrations complement the words
in this manual to best explain how to
enjoy your vehicle. By reading your
manual, you will learn about features, important safety information,
and driving tips under various road
conditions.
The general layout of the manual is
provided in the Table of Contents.
Use the index when looking for a
specific area or subject; it has an
alphabetical listing of all information
in your manual.
Sections:This manual has eight sections plus an index. Each section
begins with a brief list of contents so
you can tell at a glance if that section
has the information you want.
You will find various types of safety
instructions in this manual. These
instructions were prepared to
enhance your personal safety.
Carefully read and follow ALL procedures and recommendations provided in these instructions.
WARNING
A WARNING indicates a situation in which harm,serious bodily injury or death could result if
the warning is ignored.
CAUTION
A CAUTION indicates a situation
in which damage to your vehicle
could result if the caution is
ignored.
✽✽
NOTICE
A NOTICE indicates interesting or
helpful information is being provided.
21
FUEL REQUIREMENTS
Your new Kia vehicle is designed to
use only unleaded fuel having a
pump octane number ((R+M)/2) of
87 (Research Octane Number 91) or
higher. (Do not use methanol blended fuels.)
Your new vehicle is designed to
obtain maximum performance with
UNLEADED FUEL, as well as minimize exhaust emissions and spark
plug fouling.
CAUTION
Never add any fuel system
cleaning agents to the fuel tank
other than what has been specified. (Consult an authoriz ed Kia
dealer for details.)
WARNING - Refueling
• Do not "top off" after the nozzle automatically shuts off.
Attempts to force more fuel
into the tank can cause fuel
overflow onto you and the
ground causing a risk of fire.
• Always chec k that the fuel cap
is installed securely to prevent fuel spillage in the event
of an accident.
✽✽
NOTICE
Tighten the cap until it clicks one
time, otherwise the fuel cap open
warning indicator light will illuminate.
Introduction
Gasoline containing alcohol and
methanol
Gasohol, a mixture of gasoline and
ethanol (also known as grain alcohol), and gasoline or gasohol containing methanol (also known as
wood alcohol) are being marketed
along with or instead of leaded or
unleaded gasoline.
Pursuant to EPA regulations, ethanol
may be used in your vehicle.
Do not use gasohol containing more
than 10% ethanol, and do not use
gasoline or gasohol containing any
methanol. Ethanol provides less
energy than gasoline and it attracts
water, and it is thus likely to reduce
your fuel efficiency and could lower
your MPG results.
Methanol may cause drivability problems and damage to the fuel system,
engine control system and emission
control system.
Discontinue using gasohol of any
kind if drivability problems occur.
Vehicle damage or drivability problems may not be covered by the
manufacturer’s warranty if they result
from the use of:
13
Introduction
1. Gasoline or gasohol containing
methanol.
2. Leaded fuel or leaded gasohol.
"E85" fuel is an alternative fuel comprised of 85 percent ethanol and 15
percent gasoline, and is manufactured exclusively for use in Flexible
Fuel Vehicles. “E85” is not compatible with your vehicle. Use of “E85”
may result in poor engine performance and damage to your vehicle's
engine and fuel system. Kia recommends that customers do not use
fuel with an ethanol content exceeding 10 percent.
✽✽
NOTICE
Your New Vehicle Limited
Warranty does not cover damage to
the fuel system or any performance
problems caused by the use of “E85”
fuel.
Other fuels
Using fuels such as
Using fuels that contain Silicone (Si),
MMT (Manganese, Mn), Ferrocene
(Fe), and Other metalic additives,
may cause vehicle and engine damage or cause misfiring, poor acceleration, engine stalling, catalyst melting, clogging, abnormal corrosion,
life cycle reduction, etc.
Also, the Malfunction Indicator Lamp
(MIL) may illuminate.
✽✽
NOTICE
Damage to the fuel system or performance problem caused by the use
of these fuels may not be covered by
your New Vehicle Limited
Warranty.
Gasoline containing MMT
Some gasoline contains harmful
manganese-based fuel additives
such as MMT (Methylcyclopentadi-
enyl Manganese Tricarbonyl).
Kia does not recommend the use of
gasoline containing MMT.
This type of fuel can reduce vehicle
performance and affect your emission control system.
The malfunction indicator lamp on
the cluster may come on.
Do not use methanol
Fuels containing methanol (wood
alcohol) should not be used in your
vehicle.This type of fuel can reduce
vehicle performance and damage
components of the fuel system,
engine control system and emission
control system.
41
Fuel Additives
Kia recommends that you use good
quality gasolines treated with detergent additives such as TOP TIER
Detergent Gasoline, which help prevent deposit formation in the engine.
These gasolines will help the engine
run cleaner and enhance performance of the Emission Control
System. For more information on
TOP TIER Detergent Gasoline,
please go to the website (www.toptiergas.com).
For customers who do not use TOP
Tier Detergent Gasoline regularly,
and have problems starting or the
engine does not run smoothly, additives that you can buy separately
may be added to the gasoline. If
TOP TIER Detergent Gasoline is not
available, one bottle of additive
added to the fuel tank at every
7,500mile or every engine oil change
is recommended. Additives are available from your authorized Kia dealer
along with information on how to use
them. Do not mix other additives.
Operation in foreign countries
If you are going to drive your vehicle
in another country, be sure to:
• Observe all regulations regarding
registration and insurance.
• Determine that acceptable fuel is
available.
Introduction
VEHICLE BREAK-IN PROCESS
No special break-in period is needed.By following a few simple precautions for the first 600 miles (1,000
km) you may add to the performance, economy and life of your vehicle.
• Do not race the engine.
• While driving, keep your engine
speed (rpm, or revolutions per
minute) between 2,000 rpm and
4,000 rpm.
• Do not maintain a single speed for
long periods of time, either fast or
slow. Varying engine speed is
needed to properly break-in the
engine.
• Avoid hard stops, except in emergencies, to allow the brakes to seat
properly.
• Don't tow a trailer during the first
1,200 miles (2,000 km) of operation.
15
Introduction
VEHICLE DATA COLLECTION AND EVENT DATA RECORDERS
This vehicle is equipped with an
event data recorder (EDR). The
main purpose of an EDR is to
record, in certain crash or near
crash-like situations, such as an
air bag deployment or hitting a
road obstacle, data that will assist
in understanding how a vehicle's
systems performed. The EDR is
designed to record data related to
vehicle dynamics and safety systems for a short period of time,
typically 30 seconds or less. The
EDR in this vehicle is designed to
record such data as:
* How various systems in your
vehicle were operating;
* Whether or not the driver and
passenger safety belts were
buckled/fastened;
* How far (if at all) the driver was
depressing the accelerator
and/or brake pedal; and,
* How fast the vehicle was travel-
ing.
These data can help provide a better understanding of the circumstances in which crashes and
injuries occur. NOTE: EDR data
are recorded by your vehicle only
if a non-trivial crash situation
occurs; no data are recorded by
the EDR under normal driving
conditions and no personal data
(e.g., name , gender, age, and
crash location) are recorded.
However, other parties, such as
law enforcement, could combine
the EDR data with the type of personally identifying data routinely
acquired during a crash investigation.
To read data recorded by an EDR,
special equipment is required, and
access to the vehicle or the EDR is
needed. In addition to the vehicle
manufacturer, other parties, such
as law enforcement, that have the
special equipment, can read the
information if they have access to
the vehicle or the EDR.
61
Your vehicle at a glance
Exterior overview I . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Exterior overview II. . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Interior overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Instrument panel overview . . . . . . . . . . . . . . . . . . . 2-5
Engine compartment . . . . . . . . . . . . . . . . . . . . . . . . 2-6
2
Your vehicle at a glance
EXTERIOR OVERVIEW I
■■
Front
- 4 Door
- 5 Door
1. Hood ......................................................4-31
2. Headlamp ..............................................7-69
3. Fog light ................................................7-69
4.Tires and wheels....................................7-42
❈ The actual engine compartment in the vehicle may differ from the illustration.
5. Outside rearview mirror..........................4-43
6. Sunroof ..................................................4-36
7.Wiper blade............................................7-36
8.Windows ................................................4-26
OUB024003N/OUB025003K
22
EXTERIOR OVERVIEW II
■■
Rear
- 4 Door
Your vehicle at a glance
- 5 Door
9. Door......................................................4-17
10. Fuel filler lid ........................................4-33
11. Rear combination lamp ......................7-73
12.Tailgate (trunk) ....................................4-24
❈ The actual engine compartment in the vehicle may differ from the illustration.
13. Rear wiper blade ................................7-37
14. Center high mounted stop light ..........7-79
15. Rear window defroster ........................4-87
16. Antenna ..............................................4-125
OUB025004N/OUB025008N
23
Your vehicle at a glance
INTERIOR OVERVIEW
1. Door lock/unlock button....................4-18
2. Central door lock switch....................4-19
3. Power window switches....................4-26
4. Power window lock button ................4-29
5. Outside rearview mirror control
switch................................................4-44
6. Hood release lever............................4-31
7. Fuel filler lid release lever .................4-33
8.Trunk lid release lever (4 door).........4-22
9. Steering wheel..................................4-40
10. Steering wheel tilt control lever.......4-41
11. Active ECO button..........................5-45
12. Instrument panel illumination control
switch..............................................4-47
13. ESC OFF button.............................5-27
14. Heated steering wheel switch
(if equipped) ....................................4-41
15. Idle Stop and Go system OFF button
(if equipped) ....................................5-40
16. Fuse box.........................................7-56
17. Brake pedal.....................................5-22
18. Accelerator pedal
❈ The actual engine compartment in the vehicle may differ from the illustration.
42
OUB021001K
INSTRUMENT PANEL OVERVIEW
Your vehicle at a glance
1. Instrument cluster.............................4-46
2. Horn .................................................4-42
3. Driver’s front air bag.........................3-42
4. Light control/Turn signals .................4-77
5.Wiper/Washer...................................4-81
6. Ignition switch or ENGINE START/
STOP button.................................5-5, 5-7
7. Hazard warning flasher switch......4-77, 6-2
8. Audio..............................................4-125
9. Climate control system ...........4-88, 4-98
10. Shift lever...............................5-13, 5-16
11. Steering wheel audio control........4-126
12. Passenger’s front air bag...............3-42
13. Glove box.....................................4-114
14. Parking brake lever........................5-24
15. Power outlet .................................4-121
16. Cigarette lighter ............................4-118
17. Seat warmer .....................................3-8
❈ The actual engine compartment in the vehicle may differ from the illustration.
OUB025002N
25
Your vehicle at a glance
ENGINE COMPARTMENT
1. Engine Coolant Reservoir................7-27
2. Engine Oil Filler Cap........................7-26
3. Brake/Clutch Fluid Reservoir ...........7-30
4. Air Cleaner .......................................7-32
5. Fuse Box..........................................7-56
6. Negative Battery Ter minal .........6-5, 7-39
7. Positive Battery Terminal ..........6-5, 7-39
8. Radiator Cap....................................7-28
9. Engine Oil Dipstick...........................7-26
10.Windshield Washer Fluid Reservoir..7-31
❈ The actual engine compartment in the vehicle may differ from the illustration.
62
OUB071103N
Safety features of your vehicle
Seats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
• Front seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
• Rear seat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
• Seat belt restraint system . . . . . . . . . . . . . . . . . . . . . . 3-13
• Pre-tensioner seat belt. . . . . . . . . . . . . . . . . . . . . . . . . 3-18
• Seat belt precautions. . . . . . . . . . . . . . . . . . . . . . . . . . 3-20
• Care of seat belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22
Child restraint system . . . . . . . . . . . . . . . . . . . . . . 3-23
• Using a child restraint system . . . . . . . . . . . . . . . . . . 3-24
- Automatic locking mode . . . . . . . . . . . . . . . . . . . . . . 3-25
- Tether Anchor system. . . . . . . . . . . . . . . . . . . . . . . . 3-28
- Lower anchor system . . . . . . . . . . . . . . . . . . . . . . . . 3-29
Air bag - advanced supplemental
restraint system . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31
• How does the air bag system operate . . . . . . . . . . . . 3-32
• Air bag warning light . . . . . . . . . . . . . . . . . . . . . . . . . 3-34
• SRS components and functions . . . . . . . . . . . . . . . . . 3-34
• Occupation classification system . . . . . . . . . . . . . . . . 3-37
• Driver's and passenger's front air bag . . . . . . . . . . . 3-42
• Side impact air bag . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-45
• Curtain air bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-46
• SRS care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-53
• Air bag warning label . . . . . . . . . . . . . . . . . . . . . . . . . 3-54
3
Safety features of your vehicle
SEAT
Driver’s seat
(1) Forward and rearward
(2) Seatback angle
(3) Seat cushion height*
(4) Seat warmer*
(5) Headrest
Front passenger’s seat
(6) Forward and rearward
(7) Seatback angle
(8) Seat warmer*
(9) Headrest
Rear seat
(10) Headrest*
(11) Seatback folding*
■ 5 door
❈ The actual seats in the vehicle may differ from the illustration.
■ 4 door
23
OUB035001N
Safety features of your vehicle
WARNING - Loose
objects
Do not place anything in the driver's foot well or under the front
seats. Loose objects in the driver's foot area could interfere with
the operation of the foot pedals.
WARNING - Uprighting
seat
Do not press the release lever
on a manual seatback without
holding and controlling the
seatback. The seatback will
spring upright possibly impacting you or other passengers.
WARNING - Seat cushion
Occnpants should never sit on
aftermarket seat cushions or sitting cushions. The passenger's
hips may slide under the lap portion of the seat belt during an
accident or a sudden stop.
WARNING - Driver
responsibility for passengers
1KMN3661
The driver must advise the passenger to keep the seatback in
an upright position whenever
the vehicle is in motion. If a seat
is reclined during an accident,
the occupant's hips may slide
under the lap portion of the seat
belt, applying great force to the
unprotected abdomen.
WARNING - Driver’s seat
• Never attempt to adjust the
seat while the vehicle is moving. This could result in loss
of control of your vehicle.
• Do not allow anything to interfere with the normal position
of the seatback and seatback
adjustment.
• Sit as far back as possible
from the steering wheel while
still maintaining comfortable
control of your vehicle. A distance of at least 10" from your
chest to the steering wheel is
recommended. Failure to do
so can result in airbag inflation injuries to the driver.
33
Safety features of your vehicle
WARNING - Seat
adjustment
• Do not adjust the seat while
wearing seat belts. Moving the
seat forward will cause strong
pressure on the abdomen.
• Do not place your hand near
the seat bottom or seat track
while adjusting the seat. Your
hand could get caught in the
seat mechanism.
WARNING - Small
Objects
Use extreme caution when picking small objects trapped under
the seats or between the seat
and the center console. Your
hands might be cut or injured
by the sharp edges of the seats
mechanism.
WARNING - Unexpected
seat movement
After adjusting a manual seat,
always check that it is loc ked b y
shifting your weight to the front
and back. Sudden or unexpected movement of the driver's
seat could cause you to lose
control of the vehicle.
OUB031002
Front seat adjustment
Forward and backward
To move the seat forward or backward:
1.Pull the seat slide adjustment
lever up and hold it.
2. Slide the seat to the position you
desire.
3. Release the lever and make sure
the seat is locked in place.
Adjust the seat before driving, and
make sure the seat is locked securely by trying to move forward and
backward without using the lever. If
the seat moves, it is not locked properly.
43
OUB031003 OUB031004 OUB031042N
Seatback angle
To recline the seatback:
1.Lean forward slightly and lift up the
seatback recline lever.
2.Carefully lean back on the seat and
adjust the seatback of the seat to
the position you desire.
3.Release the lever and make sure
the seatback is locked in place.
(The lever MUST return to its original position for the seatback to
lock.)
Seat height (if equipped)
(for driver’s seat)
To change the height of the seat,
move the lever upwards or downwards.
• To lower the seat cushion, push
down the lever several times.
• To raise the seat cushion, pull up
the lever several times.
Safety features of your vehicle
Headrest
The driver's and front passenger's
seats are equipped with a headrest
for the occupant's safety and comfort.
The headrest not only provides comfort for the driver and front passenger, but also helps protect the head
and neck in the event of a collision.
For maximum effectiveness in case
of an accident, the headrest should
be adjusted so the middle of the
headrest is at the same height of the
center of gravity of an occupant's
head. Generally, the center of gravity
of most people's head is similar with
the height of the top of their eyes.
35
Safety features of your vehicle
Also, adjust the headrest as close to
your head as possible.
For this reason, the use of a cushion
that holds the body away from the
seatback is not recommended.
WARNING - Headrest
removal/adjustment
• Do not operate the vehicle
with the headrests removed.
Headrests can provide critical
neck and head support in a
crash.
• Do not adjust the headrest
height while the vehicle is in
motion. Driver may lose control of the vehicle.
Forward and backward adjustment
The headrest may be adjusted forward to 4 different positions by
pulling the headrest forward to the
desired detent. To adjust the headrest to it’s furthest backwards position, pull it fully forward to the f arthest
position and release it. Adjust the
headrest so that it properly supports
the head and neck.
OUB031005OUB031007
Adjusting the height up and down
To raise the headrest, pull it up to the
desired position (1). To lower the
headrest, push and hold the release
button (2) on the headrest support
and lower the headrest to the desired
position (3).
63
Safety features of your vehicle
OYFH034205
✽✽
NOTICE
If you recline the seatback towards
the front with the headrest and seat
cushion raised, the headrest may
come in contact with the sunvisor or
other parts of the vehicle.
OUB034100 OUB034101
Removal and installation
To remove the headrest:
1. Recline the seatback (2) with the
recline lever (1).
2. Raise headrest as far as it can go.
3. Press the headrest release button
(3) while pulling the headrest up (4).
WARNING
NEVER allow anyone to ride in a
seat with the headrest removed.
To reinstall the headrest :
1. Put the headrest poles (2) into the
holes while pressing the release
button (1).
2. Recline the seatback (4) with the
recline lever (3).
3. Adjust the headrest to the appropriate height.
WARNING - Headrest
Reinstallation
T o reduce the risk of injury to the
head or neck, always make sure
the head rest is locked into position and adjusted properly after
reinstalling.
37
Safety features of your vehicle
OUB031008
Seat warmer (if equipped)
The seat warmers are provided to
warm the front seats during cold
weather. With the ignition switch in
the ON position, push either of the
switches to warm the driver's seat or
the front passenger's seat.
During mild weather or under conditions where the operation of the seat
warmer is not needed, keep the
switches in the OFF position.
With the seat warmer switch in the
ON position, the heating system in
the seat turns off or on automatically
depending on the seat temperature.
CAUTION - Seat damage
• When cleaning the seats, do
not use an organic solvent
such as paint thinner, benzene, alcohol and gasoline.
Doing so may damage the surface of the heater or seats.
• To prevent overheating the
seat warmer,do not place anything on the seats that insulates against heat, such as
blankets, cushions or seat
covers while the seat warmer
is in operation.
• Do not place heavy or sharp
objects on seats equipped
with seat warmers. Damage to
the seat warming components
could occur.
WARNING - Seat warmer
burns
The seat warmer may cause
burns, even at low temperatures, if used over a long period
of time. Never allow passengers who may not be able to
take care of themselves to be
exposed to the risk of seat
heater burns.These include:
1. Infants, children, elderly or
disabled persons, or hospital
outpatients
2. Persons with sensitive skin
or those that burn easily
3. Fatigued individuals
4. Intoxicated individuals
5. Individuals taking medication
that can cause drowsiness or
sleepiness (sleeping pills,
cold tablets, etc.)
83
Safety features of your vehicle
Generally, the center of gravity of
most people's head is similar with
the height as the top of their eyes.
Also adjust the headrest as close to
your head as possible. For this reason, the use of a cushion that holds
the body away from the seatback is
not recommended.
OUB031009
Seatback pocket
The seatback pocket is provided on
the back of the front passenger’s
seatback.
WARNING
- Seatback
pocket
Do not put heavy or sharp
objects in the seatback pocket.
An occupant could contact
such objects in a crash. Heavy
objects in the front passenger
seatback could also interfere
with the airbag sensing system.
OUB031043N
Rear seat adjustment
Headrest
The rear seat is equipped with headrests in all the seating positions for
the occupant's safety and comfort.
The headrest not only provides comfort for passengers, but also helps
protect the head and neck in the
event of a collision.
To help maximum effectiveness in
case of an accident, the headrest
should be adjusted so the middle of
the headrest is at the same height of
the center of gravity of an occupant's
head.
39
Safety features of your vehicle
OUB031016N
Adjusting the height up and down
(if equipped)
To raise the headrest, pull it up to the
desired position (1). To lower the
headrest, push and hold the release
button (2) on the headrest support
and lower the headrest to the desired
position (3).
OUB031017N
Removal and installation
To remove the headrest, raise it as
far as it can go then press the
release button (1) while pulling the
headrest upward (2).
To reinstall the headrest, put the
headrest poles (3) into the holes
while pressing the release button (1).
Then adjust it to the appropriate
height and ensure that it locks in
position.
Folding the rear seat
The rear seatbacks may be folded to
facilitate carrying long items or to
increase the luggage capacity of the
vehicle.
WARNING - Folded
Seatback
Never allow passengers to sit on
top of the folded down seatback
while the vehicle is moving.This
is not a proper seating position
and no seat belts are available
for use.This could result in serious injury or death in case of an
accident or sudden stop.
WARNING - Objects
Objects carried on the folded
down seatback should not
extend higher than the top of
the front seatbacks. This could
allow cargo to slide forwar d and
cause injury or damage during
sudden stops.
103
OUB031049K OUB031051K OUB032049
To fold down the rear seatback:
• 4 door
1.Make sure the rear seat belt webbing is in the guide to prevent the
seat belt from being damaged.
2.Set the front seatback to the
upright position and if necessary,
slide the front seat forward.
3.Lower the rear headrests to the
lowest position.
4.Pull the lock release lever (1) and
fold the rear seatback forward and
down firmly.
If the seat belt remains extended
after returning the seatback to it's
upright position, pull the seatbelt
outward and release to retract the
seatbelt.
Safety features of your vehicle
• 5 door
1.Make sure the rear seat belt webbing is in the guide to prevent the
seat belt from being damaged.
2.Set the front seatback to the
upright position and if necessary,
slide the front seat forward.
3.Lower the rear headrests to lowest
position.
311
Safety features of your vehicle
OUB032018N
4.Pull the lock release lever (1) and
fold the rear seatback forward and
down firmly.
If the seat belt locks after unfolding
the rear seatback, pull out the
locked seat belt, release it then pull
it out again.
To unfold the rear seat
1.To use the rear seat, lift and pull
the seatback backward. Pull the
seatback firmly until it clicks into
place. Make sure the seatback is
locked in place. When you return
the seatback to its upright position,
always be sure it has locked into
position by pushing on the top of
the seatback.
If you can not see the red line at
the bottom of folding lever, it
means the seatback is locked completely.
2.Return the rear seat belt to the
proper position.
3.When the seatback is completely
installed, check the seatback folding lever again.
When returning the rear seatbacks to
the upright position, remember to
return the rear shoulder belts to their
proper position.
WARNING - Rear seat-
back
When returning the rear seatback from a folded to an upright
position, hold the seatback and
return it slowly. Ensure that the
seatback is completely locked
into its upright position by
pushing on the top of the seatback. In an accident or sudden
stop, the unlocked seatback
could allow cargo to move forward with great force and enter
the passenger compartment.
WARNING - Cargo
Do not place heavy objects in
the rear seats, since they cannot be properly secured and
may hit vehicle occupants in a
frontal collision.
123
SEAT BELTS
Seat belt restraint system
Seat belts are designed to bear upon
the bony structure of the body, and
should be worn low across the front
of the pelvis, chest and shoulders, as
applicable;wearing the lap section of
the belt across the abdominal area
must be avoided.
Seat belts should be adjusted as
firmly as possible, consistent with
comfort, to provide the protection for
which they have been designed.
A slack belt will greatly reduce the
protection afforded to the wearer.
Care should be taken to avoid contamination of the webbing with polishes, oils and chemicals, and particularly battery acid. Cleaning may
safely be carried out using mild soap
and water. The belt should be
replaced if webbing becomes frayed,
contaminated or damaged.
• For maximum restr aint system protection, the seat belts must always
be used whenever the vehicle is
moving. A properly positioned
shoulder belt should be positioned
midway over your shoulder across
your collarbone.
• Never allow children to ride in the
front passenger seat. See child
restraint system section for further
discussion.
WARNING - Shoulder
belt
Never wear the shoulder belt
under your arm or behind your
back. An improperly positioned
shoulder belt cannot protect the
occupant in a crash.
WARNING - Damaged
seat belt
Replace the entire seat belt
assembly if any part of the webbing or hardware is damaged as
you can no longer be sure that a
damaged seat belt will provide
protection in a crash.
Safety features of your vehicle
WARNING - Twisted seat
belt
Make sure your seat belt is not
twisted when worn. A twisted
seat belt may not properly protect you in an accident and
could even cut into your body.
WARNING - Seat belt
buckle
Do not allow foreign material
(gum, crumbs, coins, etc.) to
obstruct the seat belt buckle.
This may prevent the seat belt
from fastening securely.
313
Safety features of your vehicle
1GQA2083
Seat belt warning (for driver’s seat)
The driver's seat belt warning light
and chime will activate to the following table when the ignition switch is
in "ON" position.
Conditions Warning Pattern
Seat Belt
Buckled →
Unbuckled
Unbuckled
1
Warning pattern repeats 11 times
*
Vehicle
Speed
Unbuckled 6 seconds
Buckled 6 seconds None
Below 3 mph
(5 km/h)
3 mph~
6 mph
Above 6 mph
(10 km/h)
Above 6 mph
(10 km/h)
Below 3 mph
(5 km/h)
Light-Blink
6 seconds None
6 sec. on / 24 sec. off
↓
Chime-
Sound
6 seconds
(11 times)
6 seconds *
↓
2
Stop *
with an interval of 24 seconds. If
the driver's seat belt is buckled, the
light will stop within 6 seconds and
chime will stop immediately.
2
*
The light will stop within 6 seconds
and chime will stop immediately.
OUB035014N
1
Seat belt warning
(for front passenger’s seat)
The front passenger's seat belt
warning light will activate to the following table when the ignition switch
is in "ON" position.
143
Loading...