Kenwood TK-8150, TK-7150 User Manual 2
TK-7150/8150
VHF/UHF FM Mobile Radios
GENERAL FEATURES
• 50 W (136-174 MHz)
• 45 W (450-500 MHz)
• Conventional & LTR®Zones
• Remote Control Head Option
12 Character Alphanumeric Aliases
•
• Backlit Dot Matrix LCD
• 3-Digit Sub-Display
• Function / Status LCD Icons
• Transmit & Receive LEDS
• Rotary Selector Knob
• Rotary Volume Knob
• 6 PF Keys with Labels
• Emergency / AUX Key
• Enhanced Kenwood Audio
• 3.5 W Front Panel Speaker
• 13 W External Speaker Output
• Companded Audio
Encryption & ANI Board Control
•
• Emergency Call Features
• DTMF Encode / Decode
• Special Alert Tone Patterns
• Time Out Timer
• Busy Channel Lockout
• Timed Power Off
• DB-25 Accessory Connector
1
• 4 Programmable AUX I/Os
4 Programmable AUX Outputs
•
• Ext. Speaker, PA, Ignition Connector
• Ignition Sense
• Public Address/Horn Alert Output
3
4
2
• MIL-Spec / Noise-Cancel Mic Opt.
• Single / Two-Tone Encode
• Operator Selectable Tone
• Dual Priority Scan
• Single & Multi-Zone Scan
• List Scan
TRUNKED ZONES
• 250 GID / 32 Zones
• Kenwood LTR®Features
• MIL-Spec / Noise Cancel DTMF Mic Opt.
• Windows®Programming & Tuning
• Windows®Firmware Uploading
• Front Panel Test / Tune
• Cloning
• MIL-STD-810 C/D/E/F
FleetSync
• FleetSync®or FleetSync®II
• PTT ID Digital ANI
• Selective Call & Group Call
• Status Messaging
®
• Emergency Status
CONVENTIONAL ZONES
• 128 Channels / 128 Zones
• QT / DQT
• Two-Tone Decode
• Caller ID Display
• Short & Long Text Messages
• FleetSync®GPS Ready
Send GPS PF Key
•
6
6
• PC Serial Interface
5
JQA-QMA1205
Options
■ KMC-9C
Desktop Microphone
■ KMC-27A
Microphone
(noise-canceling)
■ KCT-18
Ignition Sense Cable
■ KCT-22
Remote Control Cable
8 feet
■ KCT-23
DC Power Cable
Medium Power
Dash (10 feet)
Medium Power Remote
(Positive: 23 feet,
Negative: 3.3 feet)
■ KMC-27B
Microphone
17 feet
■ KES-5
External Speaker
■ KMC-28A
Keypad Microphone
(noise-canceling)
25 feet
Specifications
Model TK-7150 TK-8150
GENERAL
Frequency Range
Type1: 136~174MHz 450~500MHz
Number of Channels (Zone)*
Conventional CH: Max.128 (1 zone x 128ch ~ 128 zones x 1ch)
Trunking ID: Max. 250/zone (max.32 zones)
Channel Spacing
Wide: 25kHz, 30kHz 25kHz
Narrow: 12.5kHz, 15kHz 12.5kHz
Operating Voltage 13.6V DC±15%
Current Drain
Standby: 0.5A 0.5A
Receive: 2.3A 2.3A
Transmit: Less than 12A Less than 13A
Duty Cycle Transmit: 20%
Operating Temperature Range -22ºF ~ +140ºF (-30ºC ~ +60ºC)
Frequency Stability ±0.00025%
(-22ºF ~ +140ºF)
Antenna Impedance 50 Ω
Dimensions (W x H x D) 7-1/12” x 2” x 7”
Weight (net) 5.9 lbs (2.7kg)
FCC ID ALH32273110 ALH32283110
Band Spread 38MHz 50MHz
* During simultaneous operation of conventional and LTR®modes.
Conventional channel/trunking ID can be programmed up to 512.
FleetSync®is a trademark of Kenwood Corporation.
®
is a registered trademark of Transcrypt International.
LTR
Applicable MIL-STD & IP
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II Cat. A1 501.3/Procedure I, II Cat. A1 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II Cat. C1 502.3/Procedure I, II Cat. C1 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I Cat. A1, C1 503.3/Procedure I Cat. A1, C1 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Rain 506.1/Procedure II 506.2/Procedure II 506.3/Procedure II 506.4/Procedure III
Humidity 507.1/Procedure II 507.2/Procedure II 507.3/Procedure II 507.4
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I Cat. 8 514.4/Procedure I Cat. 8 514.5/Procedure I Cat. 20
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
(180mm x 50mm x 170mm)
■ KLF-2
Line Filter
All accessories and options may not be available in all markets. Contact an authorized
Kenwood dealer for details and complete list of all accessories and options.
Model TK-7150 TK-8150
RECEIVER
Sensitivity
Selectivity
Intermodulation
Spurious Response 85dB
Audio Output
TRANSMITTER
RF Output Power 50 to 15 watts 45 to 15 watts
Type of Emission
Spurious Response 75dB
FM Hum & Noise
Microphone Impedance 600 Ω
Audio Distortion Less than 1% at 1000Hz
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
(Measurements made per EIA/TIA-603)
12dB SINAD: 0.35µV
20dB Quieting: 0.45µV
Wide: 84dB (±30kHz) 80dB (±25kHz)
Narrow: 76dB (±15kHz), 73dB (±12.5kHz)
Wide: 77dB (±30, 60kHz) 79dB (±25, 50kHz)
Narrow: 75dB (±15, 30kHz) 73dB (±12.5, 25kHz)
External: 12W (@ 4 Ω 3% distortion)
Internal: 3.2W (@ 16 Ω 3% distortion)
(Measurements made per EIA/TIA-603)
High: 50 watts 45 watts
Low: 15 watts 15 watts
Wide: 16K0F3E, 20K0F1D
Narrow: 11K0F3E, 11K2F1D
Wide: 48dB
Narrow: 42dB
■ KPS-10A
Regulated DC
Power Supply
■ KPS-15
DC Switching
Power Supply
■ KRK-9
Single Control Head
Remote Kit
76dB (±12.5kHz)
13W (@ 4 Ω 5% distortion)
3.5W (@ 16 Ω 5% distortion)
footnotes from Front:
1
KRK-9, KCT-22M/M2/M3, KCT-23M/M3
remote control options required.
2
6-Pin Accessory Connector for external
speaker, PA Output & ignition sense input.
3
KCT-18 ignition sense cable option required;
plugs into mobile 6-pin jack ignition sense input.
4
Built-in PA/HA outputs (no option board
required); Horn Alert operates for 2-Tone or
DTMF selective call decode only.
5
Short Text Messages are radio stored & LCD
displayed; Long Text Messages require a
KDS-100 and KCT-40.
6
FleetSync®GPS features require an internal
GPS board or externally wired GPS receiver
with NMEA TTL level serial data output to
the internal COM 1 or 2 set to "GPS".
ADS#26608 Printed in USA
Loading...