Kenwood TK-6110, TK-6110K, TK-6110K2 User Manual
TK-6110
Compact VHF Low Band Mobile Radio
GENERAL FEATURES
• 70 W (29.7-37.0, 35.0-50.0 MHz)
• 32 Channels
• Single Priority Scan
• 8 Character Alphanumeric LCD
• 3 Digit Sub-Display and Icons
Transmit / Busy / Call Allert / Warn LED
•
• Up/Down Channel Selector
• Volume Knob
• Power On/Off Button
• 7 Programmable Radio Keys
• Front Panel Speaker
• Noise Blanker Function
• Encryption / ANI Board Control
• Emergency Call Features
• QT/DQT Encode & Decode
• Operator Selectable Tone
Two Tone Decode
•
• DTMF Encode & Decode
• Time Out Timer
• Busy Channel Lockout
• 15 Pin Accessory Connector
• MIL-Spec / Noise-Cancel Microphone
• M-Type Antenna Connector
• Ignition Sense
• Timed Power Off
• Horn Alert
• Cloning
• PC Programming & Tuning
• MIL-STD-810 C/ D/ E
JQA-QMA1205
Options Specifications
Model TK-6110
■ KMC-9C
Control Station
Desktop Microphone
■ KMC-27A
Microphone
(supplied microphone)
■ KMC-27B
Microphone
(MIL-SPEC noise-canceling)
■ KMC-28A
Keypad Microphone
(MIL-SPEC noise-canceling)
■ KCT-18
Ignition Sense Cable
■ KLF-2
Line Noise Filter
■ KES-5
External Speaker
GENERAL
Frequency Range
Type 1 29.7-37.0 MHz
Type 2 35.0-50.0 MHz
Number of Channels 32
Channel Spacing
Channel Step 5 kHz
Operating Voltage 13.6 V DC ±15%
Current Drain
Standby < 0.6 A
Receive < 2.4 A
Transmit < 15 A
Duty Cycle Transmit: 20%
Operating Temperature Range -22˚f ~ +140˚f (-30˚c ~ +60˚c)
Frequency Stability
(-22˚ F - +140˚ F) ±0.0005%
Antenna Impedance 50
Dimensions (W x H x D) 6-1/4 x 2 x 6-1/4 in.
Projections not included (160 x 50 x 160 mm)
Weight (net) 3.5 lbs. (1.6kg)
FCC ID
Type 1 ALH29351110
Type 2 ALH29351120
IC Certification
Type 1
Type 2 282195666A
RECEIVER (Measurements made per EIA/TIA-603)
Sensitivity
(12dB SINAD) 0.25µV
Selectivity 75 dB
Intermodulation Distortion 70 dB
Spurious Response 70 dB
Audio Output 10W at less than 5% distortion
Band Spread
Type 1 7.3 MHz
Type 2 15.0 MHz
TRANSMITTER (Measurements made per EIA/TIA-603)
RF Output Power 70 W
Type of Emission 16K0F3E
Spurious Response 62 dB
FM Hum & Noise 50 dB
Microphone Impedance 600
Audio Distortion Less than 3%
Band Spread
Type 1 7.3 MHz
Type 2 15.0 MHz
20 kHz / 25 kHz
Ω
Ω
Kenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice.
Unavailable Frequencies:
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete
list of all accessories and options.
TK-6110K (29.7 - 37.0 MHz model): 33.60 MHz
TK-6110K2 (35.0 - 50.0 MHz model): 42.00 MHz
Applicable MIL-STD
Standard MIL 810C MIL 810D MIL 810E
Dust
Vibration
Shock
Methods/Procedures Methods/Procedures Methods/Procedures
510.1/Procedure I 510.2/Procedure I 510.3/Procedure I
514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I
516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV
ADS#43907 Printed in USA
Loading...