Kenwood TK-5810H, TK-5710H User Manual
TK-5710(H)/5810(H)
VHF/UHF FM & Project 25 Digital Mobile Radio
GENERAL FEATURES
• 50W & 110W (136-174 MHz)
• 45W & 100 W (450-520, 400-470 MHz)
• 50 Zones / 512 Channels
• Personality Lists
• Enhanced Kenwood Audio
• Zone/CH Voice Announce
• Emergency Features
• Tactical Group
• Intercom
1
• Public Address
• Time Out Timer
• Busy Channel Lockout
• Ignition Sense
• Timed Power Off
• DB-25 & 9-Pin Accessory Connectors
2
3
• Transceiver Password
• Date & 12/24 Hour Time Clock
• Windows®Programming & Tuning
• Windows®Firmware Uploading
Field-Programming & Tuning
•
• Cloning
• Easy Option Ports (26-pin)
4
4
5
• DB-25 & 9-Pin Accessory Connectors
• MIL-STD 810 C/D/E/F, IP-54
• MIL-STD Noise-Cancel Mic (included)
• MIL-STD 12-Key DTMF Mic Option
MOUNTING CONFIGURATIONS
• Dash Mount
• Single Control Head Remote Mount
• Dual Control Head Remote Mount
FRONT PANELS/CONTROL HEADS
• Backlit Dot Matrix LCD
• 3-Digit Sub-Display
• Function / Status LCD Icons
• Transmit LED
• Busy/Call Alert/Warn LED
• LCD Brightness Control
• Power On/Off Switch
• Rotary Volume Knob
• Rotary Selector Knob
• Backlit Keys
• PF Key Label Inserts
• Microphone Jack
MIL-STD 810 512.X Driven Rain
•
KCH-14 Front Panel
• 12-Character Alphanumeric Aliases
• 5 PF Keys
• UP/DOWN Keys
• Built-in Front Speaker
KCH-15 Front Panel
• 14-Character Alphanumeric Aliases
• 11 PF Keys
• UP/DOWN Keys
• External Speaker Required
SCAN TYPES (FM & P25)
• Single Zone/Multi-Zone Scan
Scan Lists
•
• Conventional Scan
• Limited Talk Group Scan
• Priority Monitor Scan
• Dual Priority Scan
11
6
6
FM
• QT / DQT
• Operator Selectable Tone
• Two-Tone Decode / Encode
• DTMF Encode / Decode / Stun
• Special Alert Tone Patterns
7
8
9
• Horn Alert Output
• Encryption / ANI Board Control
• Companded Audio
FleetSync® (FM)
• FleetSync®or FleetSync®II
• PTT ID Digital ANI
• Caller ID Display
• Status Messaging
• Emergency & Stun Statuses
• Selective & Group Call
• Text Messaging
10
P25 DIGITAL
• P25 Digital Conventional
• P25 Digital Trunking Option
• IMBETMVOCODER
• Talk Group ID Lists
• Individual ID Lists
• Caller ID Display
• RSSI Indicator
• Remote Monitor
• Remote Check
• Radio Inhibit
• Encryption Key Delete
• Encryption Key Zeroize (SCM required)
• Encryption Key Retention (SCM required)
• DES 16-Key SCM Option
11
• AES FIPS 140-2 & DES 16-Key SCM Option
• KPG-94 KVL Key Loader Interface Cable
11
12
11
11
JQA-QMA1205
Options Specifications
Model TK-5710 TK-5710H TK-5810 TK-5810H
■ KMC-9B
Desktop Microphone
■ KMC-27
Microphone
(MIL-SPEC noise-canceling)
■ KMC-28
Keypad Microphone
(MIL-SPEC noise-canceling)
■ KCT-18
Ignition Sense Cable
■ KCT-22
Remote Control Cable
8ft./17ft./25ft.
■ KCT-23
DC Power Cable
■ KES-5
External Speaker (20W)
■ KCH-14
Basic Remote
Control Head
■ KCH-15
Full-Featured Remote
Control Head
■ KRK-5
Single Control Head Remote Kit
■ KRK-6DH
Dual Control Head Remote Kit
■ KPG-94
Keyloader Interface Cable
■ VGS-1
Voice Guide & Storage Unit
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete
list of all accessories and options.
Applicable MIL-STD & IP
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II Cat.A1 501.3/Procedure I, II Cat.A1 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II Cat.C1 502.3/Procedure I, II Cat.C1 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I Cat.A1,C1 503.3/Procedure I Cat.A1,C1 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Rain 506.1/Procedure I, II 506.2/Procedure I,II 506.3/Procedure I, II 506.4/Procedure I, III
Humidity 507.1/Procedure II 507.2/Procedure II 507.3/Procedure II 507.4
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.1/Procedure I 510.2/Procedure I, II 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I Cat.8,II Cat.3 514.4/Procedure I Cat.8,II Cat.3 514.5/Procedure I Cat.20,II Cat.5
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V, VI 516.4/Procedure I, IV, V, VI 516.5/Procedure I, IV, V, VI
International Protection Standard
Dust & Water Protection IP54
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
GENERAL
Frequency Range
Type 1
Type 2
Number of Channels 512
Zones 50
Max. Channels per Zone
Channel Spacing
Analog 12.5 / 15 / 20 / 25 / 30 kHz 12.5 / 25 kHz
Digital 12.5 kHz
Operating Voltage 13.6V DC ± 15% 13.4V DC ± 15% 13.6V DC ± 15% 13.4V DC ± 15%
Current Drain
Standby Less than 0.6A
Receive Less than 2.3A
Transmit Less than 12A Less than 25A Less than 14A Less than 28A
Duty Cycle Transmit: 20%
Operating Temperature Range -22 ˚F to +140 ˚F (-30 ˚C to +60 ºC)
Frequency Stability ± 2.0 ppm (-22 ˚F to +140 ˚F)
Antenna Impedance
Dimensions (W x H x D)
RF Deck only 7.01 x 2.36 x 7.68 in. 7.01 x 2.36 x 12.87 in. 7.01 x 2.36 x 7.68 in. 7.01 x 2.36 x 12.87 in.
with KCH-14 or15 7.05 x 2.36 x 9.09 in. 7.05 x 2.36 x 14.29 in. 7.05 x 2.36 x 9.09 in. 7.05 x 2.36 x 14.29 in.
Weight RF Deck only 5.3 lbs. (2.4 kg) 8.6 lbs. (3.9 kg) 5.5 lbs. (2.5 kg) 9.2 lbs. (4.2 kg)
with KCH-14 5.9 lbs. (2.7 kg) 9.2 lbs. (4.2 kg) 6.2 lbs. (2.8 kg) 9.9 lbs. (4.5 kg)
with KCH-15 5.9 lbs. (2.7 kg) 9.2 lbs. (4.2 kg) 6.2 lbs. (2.8 kg) 9.9 lbs. (4.5 kg)
FCC ID
Type 1
Type 2
IC Certification
Type 1
Type 2
RECEIVER (Measurements made per EIA/TIA-204-D)
Sensitivity
Digital (5% BER) 0.25 µV
Digital (1% BER) 0.40 µV
Analog 12 dB SINAD 0.25 µV
Selectivity
Digital -63 dB
Analog @ 25/30 kHz -83 dB / -85 dB -83 dB / -
Analog @12.5/15 kHz -76 dB / -80 dB -76 dB / Intermodulation Distortion (Digital & Analog)
Spurious Response (Digital & Analog)
Audio Distortion
Digital Less than 1.0%
Analog Less than 2.0%
Audio Output
Internal (KCH-14) @3% 1.5 W at 8 Ω
External @3% 12 W at 4 Ω
TRANSMITTER (Measurements made per EIA/TIA-152-C)
RF Output Power
Spurious & Harmonics 80 dB
FM Hum & Noise
Analog @ 25 kHz 50 (53)
Analog @12.5 kHz 45 (47) *1dB 45 dB
Microphone Impedance 600 Ω
Audio Distortion Less than 2%
Modulation 16K0F3E, 11K0F3E, 8K10F1E, 8K10F1D
Analog measurements made per TIA/EIA 603
Digital measurements made per TIA/EIA 102CAAA
(*1) 148MHz ~ 168MHz
(*2) Type 1: 100W to 50W for 450-500MHz. More than 60W to 50W
for 500-520MHz.
Type 2: 100W to 50W for 400-470MHz.
(178 x 60 x 195 mm) (178 x 60 x 327 mm) (178 x 60 x 195 mm) (178 x 60 x 327 mm)
(179 x 60 x 231 mm) (179 x 60 x 363 mm) (179 x 60 x 231 mm) (179 x 60 x 363 mm)
K4435753110 K4435753210 K4439923110 K4439923210
282F-35753110
@5% 1.625 W at 8 Ω
@5% 13 W at 4 Ω
50 W to 5 W 110 W to 50 W 45 W to 5 W 100 W to 50 W
136-174 MHz 450-520 MHz
*1
dB 50 dB
20K0F7D, 11K2F7D, 14K4F1D, 7K20F1D
FleetSync® is a registered trademark of Kenwood Corporation.
Windows® is a registered trademark of Microsoft Corporation in the United States
and other countries.
TM
is a trademark of Digital Voice Systems Inc.
IMBE
The P25 Logo is used under license and is a registered trademark of the Project 25
Technology Interest Group.
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
400-470 MHz
250
50 Ω
K4439923120 K4439923220
282F-39923120
-80 dB
-90 dB
*2
footnotes from Front:
1
Intercom: Dual Head capable remote mounts only.
2
KCT-18 ignition sense cable option required.
3
DB-25 ACC: I/O's for dispatch consoles, desktop remotes, vehicle
intercom/PA units, motorcycle PTT/headset kits, PC Laptop /Data
Modems, GPS/AVL Modems; DB-25 (9 Prog. AUX I/O's & 2 Prog.
AUX Outputs); 1 Prog Input (on Control Head).
4
KPG-95D Software required (Windows 98/ NT/ 2000/ Me/XP
compatible).
5
Easy Option Ports: VGS-1, ANI & Scrambler board ports; only 2
ports can be used simultaneously.
6
P25 Trunking option required.
7
Two-Tone: Decode (4 sets x 4 pairs each); Encode: 32 pairs;
Operator Selectable Tone (40 QT.DQT code pairs).
8
DTMF Encode: PTT ID, Emergency ANI, Manual Encode (KMC-28),
Auto-Dial (9 numbers); DTMF Decode: Primary/secondary ID, Stun
(a.k.a. dead beat disable).
9
Operates for 2-Tone, DTMF, FleetSync selective calling.
10
FleetSync & FleetSync II are not compatible.
11
Feature/Option added to the TK-5710 Version 2 radios (SN
80600001 or later).
12
KPG-94 adapts the Motorola‚ KVL3000/3000 Plus Key Loader to
the TK-5710/5810.
ADS#43807 Printed in USA
Loading...