Kenwood KS-908EX User Manual

KS-908EX

SPEAKER SYSTEM

INSTRUCTION MANUAL

KENWOOD CORPORATION

ENGLISH

B61-1218-00 00 C (K) KW EW 0312

Introduction

Thank you for selecting our speakers as part of your high-fidelity system. We at KENWOOD are confident that your choice will bring you

years of rich listening pleasure. Please take the time to read through this booklet carefully. It will help you to obtain the peak performance

for which the speakers were designed.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.

Refer to these model and serial numbers whenever you call upon your KENWOOD dealer for information or service on this product.

Model KS-908EX is composed of the front speakers, center speaker, surround speakers and surround back speaker.

KS-908EX Serial number

ENGLISH

Important Safeguards

Caution: Read this item carefully to keep your

safety.

1. Suffocation – After taking the unit out of the polyethylene

bag, be sure to dispose of the polyethylene bag out of the

reach of children. Otherwise, they may play with the bag,

which could cause hazard of suffocation.

2. Water and moisture – The appliance should not be used

near water - for example, near a bathtub, washbowl, kitchen

sink, laundry tub, in a wet basement, or near a swimming

pool, etc.

3. Heat – Do not install the unit near a source of heat, such

as radiators, or under direct sunlight.

4. Modification – Do not attempt to open or modify the unit,

for this could cause fire hazard or malfunction.

5. Cleaning – Do not use volatile solvents such as alcohol,

paint thinner, gasoline, or benzine, etc. to clean the cabi-

net. Use a clean dry cloth.

6. Abnormal smell – If an abnormal smell or smoke is de-

tected, immediately turn the power OFF and unplug the

appliance from the wall outlet. Contact your dealer or near-

est service center.

Assembly (Front Speaker)

1. Lay the speaker body on its side.

Place the speaker body gently on a level, stable surface (on a chair, etc.).

2. Fit the base.

•The base is heavy. Take care not to drop it on your foot.

5. Connect the speaker cord to the terminals.

1. Twist wire’s conductor

2. Loosen

3. Insert the conductor

4. Secure

ENGLISH

3. Clamp the base using the provided screws.

4. Pass the speaker cord through the bottom of the base.

Insert the speaker cord here.

• Connect the wire with white stripes to the (+) terminal.

6. Stand up the speaker body.

+ 5 hidden pages