Kenwood KMM-101GY User Manual [ru]

KMM-264

KMM-101AY

KMM-101RY

KMM-121Y

KMM-101GY

DIGITAL MEDIA RECEIVER

INSTRUCTION MANUAL

ЦИФРОВОЙ МЕДИА-РЕСИВЕР

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

ЦИФРОВИЙ МЕДІА-РЕСИВЕР

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.

The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Notice:

For Turkey

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir.

Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (atık yan ürün toplama sistemlerini kullanan ülkeleri için uygulanabilir)

For Israel

Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak atılamaz. Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da yardımcı olacaktır.

Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU Representative:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Декларация соответствия относительно Директивы 2004/108/EC Электромагнитная совместимость Декларация соответствия относительно Директивы 2011/65/EU об ограничении содержания вредных веществ Производитель:

ДжейВиСи КЕНВУД Корпорейшн 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Япония

Представительство в EC:

ДжейВиСиКЕНВУД Нидерланд Би.Ви. Amsterdamseweg 37, 1422 AC UITHOORN, Нидерланды

Декларація про відповідність вимогам Директиви EMC 2004/108/EC Декларація про відповідність вимогам Директиви RoHS 2011/65/EU Виробник:

JVC KENWOOD Corporation 3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Представник у ЕС:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы (годности) данного товара “по истечении которого он может представлять опасность для жизни, здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7) лет со дня производства. Этот срок является временем, в течение которого потребитель данного товара может безопасно им пользоваться при условии соблюдения инструкции по эксплуатации данного товара, проводя необходимое обслуживание, включающее замену расходных материалов и/или соответствующее ремонтное обеспечение в специализированном сервисном центре.

Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных косметических материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в частности, гарантийного свидетельства KENWOOD, которое он может получить в соответствии с законом о правах потребителя или других законов, связанных с ним.

Декларація про Відповідність Вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (затвердженого Постановою №1057 Кабінету Міністрів України)

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (ТР ОВНР).

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР:

свинець(Pb) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

кадмій (Cd)– не перевищує 0.01 % ваги речовини або в концентрації до 100 частин на мільйон;

ртуть(Hg) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

шестивалентний хром (Cr 6+) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

полібромбіфеноли (PBB) – не перевищує 0.1% ваги речовини або в концентрації до 1000 частин на мільйон;

полібромдефенілові ефіри (PBDE) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон.

CONTENTS BEFORE USE

BEFORE USE 2

BASICS 3

GETTING STARTED 3

RADIO 5

USB / iPod / ANDROID 6

AUX 8

DISPLAY SETTINGS 8

AUDIO SETTINGS 9

TROUBLESHOOTING 10

MORE INFORMATION 11

INSTALLATION / CONNECTION 12

SPECIFICATIONS 14

How to read this manual

• Operations are explained mainly using buttons on the faceplate of

• English language is used for the display explanation in this manual.

• [

• ( available on the stated page.

] indicates the selected items.

XX) indicates references are

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector: Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage the connector.

Connector (on the reverse side of the faceplate)

BASICS

Faceplate

Volume knob

(turn/press)

Detach button

To On the faceplate

Turn on the power

Adjust the volume Turn the volume knob.

Select a source

Change the display information

Display window

Press

• Press and hold to turn off the power.

Press

• For

Press

• Press and hold to scroll the current display information.

repeatedly.

: Press iPod to select iPod source directly.

repeatedly.

GETTING STARTED

Select the display language and cancel the demonstration

When you turn on the power (or after you reset the unit), the display shows: “SELLANGUAGE” “VOLUMEKNOB”

1 Turn the volume knob to select [

(Russian), then press the knob.

[

ENG

] is selected for the initial setup.

Then, the display shows: “CANCEL DEMO” “PRESS”

How to resetAttach Detach

Your preset adjustments will also be erased.

“VOLUME KNOB”.

2 Press the volume knob.

[

YES

] is selected for the initial setup.

3 Press the volume knob again.

“DEMOOFF” appears.

Set the clock

Press the volume knob to enter [

1 2 Turn the volume knob to select [

knob.

3 Turn the volume knob to select [

press the knob.

4 Turn the volume knob to make the settings, then press

the knob.

Day

Hour Minute

5 Turn the volume knob to select [

press the knob.

“PRESS”

ENG

] (English) or [

FUNCTION

CLOCK

], then press the

CLOCK ADJUST

CLOCK FORMAT

], then

RUS

]

ENGLISH

GETTING STARTED

6 Turn the volume knob to select [

knob.

7 Press and hold to exit.

To return to the previous setting item, press .

(For / / / ) While in clock display screen...

Press and hold directly.

Then, perform step

Set the initial settings

Press to enter STANDBY.

4 to set the clock.

2 Press the volume knob to enter [

For

AUD enter [

/ / / , pressing

AUDIO CONTROL

3 Turn the volume knob to make a selection (see the following

table), then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

AUDIO CONTROL

SWITCH PREOUT

SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM

REAR/ SUB-W

speakers or a subwoofer are connected to the line out terminals on the rear (through an external amplifier).

(5inches or 4inches, 6×9inches or 6inches) or OEM speakers for optimum performance.

12H

] or [

24H

], then press the

to enter clock adjustment mode

FUNCTION

] directly.

Default:

REAR/ SUBWOOFER

: Selects according to the speaker size

: Selects whether rear

DISPLAY

EASY MENU

TUNER SETTING

PRESET TYPE

SYSTEM

KEY BEEP SOURCE SELECT

BUILT-IN AUX

P-OFF WAIT

F/W UPDATE

UPDATE SYSTEM

F/W UP xx.xx

CLOCK

CLOCK DISPLAY

ENGLISH

РУССКИЙ

(For ) ON

:Both display and button illumination change to white color when

entering [

FUNCTION

].;

OFF

[

COLORSELECT

NORMAL

:Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW).; regardless of the selected band.

:Activates the keypress tone.;

:Enables AUX in source selection.;

Applicable only when the demonstration mode is turned off. Sets the duration when the unit will automatically turn off (while in standby mode) to save the battery.

20M

: 20minutes;

WAIT TIME – – –/ OFF – – –

YES

:Starts upgrading the firmware.; NO:Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/

:The clock time is shown on the display even when the unit is turned off.;

OFF

:Cancels.

Selected language is use as the display langauge for [ and Tag information (folder name, file name, song title, artist name, album name) if applicable.

:Both display and button illumination remain as

] color. ( 8)

MIX

:Memorizes one station for each preset button,

OFF

:Deactivates.

OFF

:Disables. ( 8)

40M

: 40minutes;

:Cancels

60M

: 60minutes;

FUNCTION

] menu

RADIO

Search for a station

Press repeatedly to select TUNER.

1 2 Press repeatedly to select FM1/ FM2/

FM3/ MW/ LW.

3 Press S/T to search for a station.

• To change the searching method for S/T:

Press

AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number

buttons (1to6).

• To select a stored station: Press one of the number

buttons (1to6).

Other settings

Press the volume knob to enter [

1 2 Turn the volume knob to make a selection (see

the following table), then press the knob.

3 Repeat step 2 until the desired item is selected or

activated.

4 Press and hold to exit.

To return to the previous setting item, press .

repeatedly.

FUNCTION

Default:

TUNER SETTING

LOCAL SEEK

AUTO MEMORY

MONO SET ON NEWS SET ON REGIONAL ON AF SET ON

TI ON

PTY SEARCH

CLOCK

TIME SYNC

• [

LOCAL SEEK

when the band is FM1/ FM2/ FM3.

• Available Program Type:

SPEECH

MUSIC: POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS

The unit will search for the Program Type categorized under [

• If the volume is adjusted during reception of traffic information, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, alarm or news bulletin is turned on.

: Searches only stations with good reception. ;

•

Settings made are applicable only to the selected source/station. Once you change the source/

station, you need to make the settings again.

YES

:Automatically starts memorizing 6 stations with good reception.; NO:Cancels.

•

Selectable only if [

:Improves the FM reception, but the stereo effect may be lost.;

:The unit will temporarily switch to News Programme if available. ;

: Switches to another station only in the specific region using the “AF” control.;

: Automatically searches for another station broadcasting the same program in the same Radio

Data System network with better reception when the current reception is poor.;

: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up).;

OFF

:Cancels.

Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language ( Selects the available Program Type (see the following), then, press

:Synchronizes the unit’s time to the Radio Data System station time.;

]/ [

MONO SET

: NEWS

, AFFAIRS

WEATHER

, FINANCE

(music), JAZZ

, COUNTRY

NORMAL

] is selected for [

ENGLISH/ FRENCH/ GERMAN

]/ [

NEWS SET

]/ [

REGIONAL

, INFO (information), SPORT

, CHILDREN

, SOCIAL

, RELIGION

, NATION M (music), OLDIES

OFF

: Cancels.

PRESET TYPE

), then press the knob.

]/ [

AF SET

]/ [TI]/ [

, EDUCATE

, DRAMA

, PHONE IN

, FOLK M (music)

]. ( 4)

PTY SEARCH

, CULTURE

, TRAVEL

SPEECH

OFF

S / T

, LEISURE

:Cancels.

OFF

:Cancels.

OFF

:Cancels.

OFF

:Cancels.

to start.

OFF

:Cancels.

] is selectable only

, SCIENCE

, VARIED

, DOCUMENT

, OTHER M

] or [

MUSIC

] if selected.

ENGLISH

USB / iPod / ANDROID

Start playback

The source changes automatically and playback starts.

USB input terminal

USB

CA-U1EX (max.: 500mA) (optional accessory)

iPod/iPhone

KCA-iP102 / KCA-iP103 (optional accessory) of the iPod/iPhone

ANDROID

Micro USB 2.0 cable (commercially available)

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

(for )

or accessory cable

To On the faceplate

Playback / pause Press .

Reverse / Fast-forward Select a file Select a folder

Repeat play

Press and hold S/T. Press S/T.

Press J/K. Press repeatedly.

FILE REPEAT/ FOLDER REPEAT/ REPEAT OFF

: MP3/WMA/WAV/FLAC file, iPod

or ANDROID

Random play

FILE REPEAT/ REPEAT OFF

Press repeatedly.

FOLDER RANDOM/ RANDOM OFF

: KME Light/ KMC file

: MP3/WMA/WAV/FLAC file, KME Light/

KMC file, iPod or ANDROID

Press and hold

Select control mode While in iPod source, press and hold iPod.

MODE ON

: Control from the iPod

MODE OFF

: Control from the unit

While in ANDROID source,

Select music drive (

7, [

MUSIC DRIVE]

)

Press 5 repeatedly.

The stored songs in the following start playback.

to select

( 7, [

ALL RANDOM

ANDROID SETUP])

• Selected internal or external memory of a smartphone (Mass Storage Class).

• Selected drive of a multiple drives device.

USB / iPod / ANDROID

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. (

For ANDROID: Applicable only when [

Only for MP3/WMA/WAV/FLAC files. This does not work for iPod/ ANDROID.

For iPod/ ANDROID: Applicable only when [

KME Light : KENWOOD Music Editor Light, KMC : KENWOOD Music Control ( 11)

You can still play/pause, file skip, fast-forward or reverse files from the unit.

BROWSE MODE

MODE OFF

] is selected. ( [

]/ [

BROWSE MODE

Select a file from a folder/list

Press .

1 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

For USB (for KME Light/ KMC files):

Press S/T to search at a preset skip search ratio. ( Press and hold S/T to search at a 10

ratio.

• Not applicable for MP3/WMA/WAV/FLAC files. For iPod:

You can search for a file according to the first character.

Turn the volume knob quickly to enter character search. Turn the volume knob to select the character.

To search for a character other than A to Z and 0to9, enter only “ * ”.

Press S/T to move to the entry position.

• You can enter up to 3characters.

Press the volume knob to start searching.

• To return to the root folder/ first file/ top menu, press 5.

• To return to the previous setting item, press

• To cancel, press and hold

• For iPod, applicable only when [

• For ANDROID, applicable only when [

MODE OFF

BROWSE MODE

] is selected. ( 6)

] is selected. ( [

11)

ANDROID SETUP

] is selected.

[

SKIP SEARCH

])

ANDROID SETUP

Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo

(for )

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Other settings

Press the volume knob to enter [

FUNCTION

2 Turn the volume knob to make a selection (see the

following table), then press the knob.

3 Repeat step 2 until the desired item is selected or

activated.

4 Press and hold to exit.

To return to the previous setting item, press

ANDROID SETUP

BROWSE MODE

application).;

: Control from the unit (using KENWOOD MUSIC PLAY

HAND MODE

:Control other media player applications from the Android device (without using KENWOOD MUSIC PLAY application). However, you can still play/pause and file skip from the unit.

USB

MUSIC DRIVE DRIVE CHANGE

:The next drive ([

DRIVE 1

] to [ selected automatically and playback starts. Repeat steps

SKIP SEARCH 0.5%/ 1%/ 5%/ 10%

to 3 to select the following drives.

: While listening to iPod, ANDROID or KME Light/ KMC file, selects the skip search ratio over the total files.

])

Default:

DRIVE 5

]) is

ENGLISH

AUX

Preparation:

Select [

] for [

BUILT-IN AUX

Start listening

Connect a portable audio player (commercially available).

Auxiliary input jack

3.5mm stereo mini plug with “L” shaped connector (commercially available)

2 Press repeatedly to select AUX. 3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter [ 2 Turn the volume knob to select [ 3 Turn the volume knob to select [ 4 Turn the volume knob to make a selection, then press the knob.

AUX

(default)/

5 Press and hold to exit.

To return to the previous setting item, press .

]. ( 4)

Portable audio player

FUNCTION SYSTEM

], then press the knob.

AUX NAME SET

DVD/ PORTABLE/ GAME/ VIDEO/ TV

], then press the knob.

DISPLAY SETTINGS

1 Press the volume knob to enter [ 2 Turn the volume knob to select [ 3 Turn the volume knob to make a selection (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected/activated or follow

the instructions stated on the selected item.

5 Press and hold to exit.

To return to the previous setting item, press .

COLOR SELECT

DIMMER ON

BRIGHTNESS 0

TEXT SCROLL AUTO/ ONCE

For .

Preset colors:

BLUE2 GREEN2 ORANGE2

VARIABLE SCAN/ CUSTOM R/G/B

preferred key and display illumination color.

You can create your own color (when [ is selected). The color you have created can stored in [

Press and hold the volume knob to enter the detailed color

adjustment.

Press S/T to select the color (R/ G/ B) to adjust.

Turn the volume knob to adjust the level (0 — 9), then press the

knob.

:Dims the display illumination (and button illumination*1).;

OFF

:Cancels.

— 31: Selects your preferred brightness level for display illumination

(and button illumination*

automatically, or scroll only once.;

RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/ BLUE1/

BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/ AQUA2/ GREEN1/

GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/ YELLOW/ ORANGE1/

ORANGERED

:Selects whether to scroll the display information

FUNCTION

DISPLAY

], then press the knob.

/ preset colors*2: Selects your

CUSTOM R/G/B

OFF

:Cancels.

Default:

] or preset colors*2

CUSTOM R/G/B

AUDIO SETTINGS

While listening to any source...

1 Press the volume knob to enter [ 2 Turn the volume knob to select [

For

enter [

/ / / , pressing AUD

AUDIO CONTROL

] directly.

3 Turn the volume knob to make a selection (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

SUB-W LEVEL –15

BASS LEVEL –8

MID LEVEL –8

TRE LEVEL –8

EQ PRO

BASS ADJUST

MID ADJUST

TRE ADJUST

+15 (0

) Adjusts the subwoofer output level.

to +8 (+6)

to +8 (+5)

to +8 (0)

BASS CTR FRQ

BASS LEVEL –8

BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00

BASS EXTEND ON

MID CTR FRQ

MID LEVEL –8

MID Q FACTOR 0.75/ 1.00/ 1.25

TRE CTR FRQ

TRE LEVEL –8

FUNCTION

AUDIO CONTROL

Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

60/ 80/ 100/ 200

Selects the center frequency.

to +8 (+6):Adjusts the level.

:Turns on the extended bass.;

0.5K/ 1.0K/ 1.5K/ 2.5K

2.5KHZ

:Selects the center frequency.

to +8 (+5):Adjusts the level.

10.0K/ 12.5K/ 15.0K/ 17.5K

15.0KHZ/ 17.5KHZ

to +8 (0):Adjusts the level.

], then press the knob.

60HZ/ 80HZ/ 100HZ/ 200HZ

:Adjusts the quality factor.

OFF

:Cancels.

0.5KHZ/ 1.0KHZ/ 1.5KHZ

:Adjusts the quality factor.

:Selects the center frequency.

10.0KHZ/ 12.5KHZ

Default:

PRESET EQ DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ

BASS BOOST LV1/ LV2/ LV3

LOUDNESS LV1/ LV2

SUBWOOFER SET ON

LPF SUBWOOFER THROUGH

SUB-W PHASE REVERSE

FADER R15

BALANCE L15

VOLUME OFFSET

SOUND RECNSTR

(Sound reconstruction)

• [

SUB-W LEVEL

selectable only if [

• [

SUB-W LEVEL

[

SUBWOOFER SET

NATURAL/ USER

genre. (Select [ [

DRIVE EQ

running noise of the tyres.

bass boost level.;

frequencies boost to produce a well-balanced sound at a low volume level.

:Turns on the subwoofer output.;

160HZ

160Hz are sent to the subwoofer.

output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [ selected for [

For AUX: adjustment level of each source. (Before adjustment, select the source you want to adjust.)

:Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression.;

]/ [

SUBWOOFER SET

SWITCH PREOUT

]/ [

LPF SUBWOOFER

] is set to [ON].

:Selects a preset equalizer suitable to the music

USER

] to use the customized settings.)

] is a preset equalizer that reduces noise outside the car or

LEVEL1/ LEVEL2/ LEVEL3

OFF

:Cancels.

LEVEL1/ LEVEL2:Selects your preferred low and high

;

OFF

:Cancels.

OFF

:All signals are sent to the subwoofer.;

:Audio signals with frequencies lower than 85Hz/ 120Hz/

(180°)/

NORMAL

(0°):Selects the phase of the subwoofer

LPF SUBWOOFER

F15 (0

):Adjusts the rear and front speaker output balance.

R15 (0

):Adjusts the left and right speaker output balance.

–8

to +8(0) ; For other sources: –8 to 0:Presets the volume

]/ [

].)

OFF

:Cancels.

LPF SUBWOOFER

] is set to [

SUB-W PHASE

SUB-W

] is selectable only if

:Selects your preferred

:Cancels.

85HZ/ 120HZ

]/ [

SUB-W PHASE

] or [

SUBWOOFER

ENGLISH

THROUGH

] is

]. ( 4)

TROUBLESHOOTING

Symptom Remedy

Sound cannot be heard.

“MISWIRING CHECK WIRING THEN PWR ON” appears.

“PROTECTING SEND SERVICE” appears.

General

•

Sound cannot be heard.

•

The unit does not turn on.

•

Information shown on the

display is incorrect.

The unit does not work at all. Reset the unit. (

•

Radio reception is poor.

•

Static noise while listening

Radio

to the radio.

“READING” keeps flashing. Do not use too many hierarchical levels or folders.

Elapsed playing time is not correct.

Correct characters are not displayed (e.g. album name).

“NA FILE”

USB / iPod

“READ ERROR” Copy the files and folders onto the USB device again. If

“NO DEVICE” Connect a USB device, and change the source to USB

•

Adjust the volume to the optimum level.

•

Check the cords and connections.

Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.

Send the unit to the nearest service center.

Clean the connectors. (

•

Connect the antenna firmly.

•

Pull the antenna out all the way.

This is caused by how the files are recorded.

This unit can only display uppercase letters, numbers, and a limited number of symbols. Uppercase Cyrillic letters can also be displayed if [ (

4)

Make sure the media contains supported audio files. (

11)

this does not solve the problem, reset the USB device or use another USB device.

again.

2)

3)

РУССКИЙ

] is selected.

Symptom Remedy

“COPY PRO” A copy-protected file is played.

“NA DEVICE” Connect a supported USB device, and check the

“NO MUSIC” Connect a USB device that contains playable audio files.

USB / iPod

“iPod ERROR”

•

Sound cannot be heard

during playback.

•

Sound output only

from the Android device.

Cannot playback at [

BROWSE MODE

ANDROID

“NO DEVICE” or “READING” keeps flashing.

Playback is intermittent or sound skips.

“ANDROID ERROR” / “NADEVICE”

connections.

•

Reconnect the iPod.

•

Reset the iPod.

•

Reconnect the Android device.

•

If in [

HAND MODE

application on the Android device and start playback.

•

If in [

HAND MODE

application or use another media player application.

•

Restart the Android device.

•

If this does not solve the problem, the connected

Android device is unable to route the audio signal to unit. (

•

Make sure KENWOOD MUSIC PLAY APP is installed on

the Android device. (

•

Reconnect the Android device and make the appropriate

setting in [

•

If this does not solve the problem, the connected

Android device does not support [ (

11)

•

Switch off the developer options on the Android device.

•

Reconnect the Android device.

•

If this does not solve the problem, the connected

Android device does not support [ (

11)

Turn off the power saving mode on the Android device.

•

Reconnect the Android device.

•

Restart the Android device.

], launch any media player

], relaunch the current media player

11)

ANDROID SETUP

7)

]. ( 7)

BROWSE MODE

MORE INFORMATION

General

Detailed information and notes about the playable audio files are stated in an online manual on the following web site: www.kenwood.com/cs/ce/audiofile/

Playable files

•

Playable audio file: MP3 (.mp3), WMA (.wma), WAV (.wav), FLAC (.flac)

•

Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device.

About USB devices

•

This unit can play MP3/WMA/WAV/FLAC files stored on a USB mass storage class device.

•

You cannot connect a USB device via a USB hub.

•

Connecting a cable whose total length is longer than 5m may result in abnormal playback.

•

This unit cannot recognize a USB device whose rating is other than 5V and exceeds 1A.

About KENWOOD Music Editor Light and KENWOOD Music Control

•

This unit supports the PC application KENWOOD Music Editor Light and Android™ application

KENWOOD Music Control.

•

When you play audio files with song data added using the KENWOOD Music Editor Light or

KENWOOD Music Control, you can search for audio files by Genres, Artists, Albums, Playlists, and Songs.

•

KENWOOD Music Editor Light and KENWOOD Music Control are available on the following

web site: www.kenwood.com/cs/ce/

About iPod/iPhone

Made for

iPod touch (2nd, 3rd, 4th, and 5th generation)

iPod classic

iPod nano (3rd, 4th, 5th, 6th, and 7th generation)

iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C

•

For the latest compatible list and software versions of iPhone/iPod, see:

www.kenwood.com/cs/ce/ipod

•

You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod.

About Android device

•

This unit supports Android OS 4.1 and above.

•

Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory

(AOA) 2.0.

•

If the Android device supports both mass storage class device and AOA 2.0, this unit always

playback via AOA 2.0 as priority.

•

For more information and the latest compatible list, see: www.kenwood.com/cs/ce/

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory. (

When a call comes in, “CALL” appears. (The audio system pauses.)

• To continue listening to the audio system during a call, press

“CALL” disappears and the audio system resumes.

When the call ends, “CALL” disappears. (The audio system resumes.)

13)

ENGLISH

Warning

•

The unit can only be used with a 12V DC power supply, negative ground.

•

Disconnect the battery’s negative terminal before wiring and mounting.

•

Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis

or Ground wire (black) to prevent a short circuit.

•

Insulate unconnected wires with vinyl tape to prevent a short circuit.

•

Be sure to ground this unit to the car’s chassis again after installation.

Caution

•

For safety’s sake, leave wiring and mounting to professionals. Consult the car

audio dealer.

•

Install this unit in the console of your vehicle. Do not touch the metal parts of

this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.

•

Do not connect the [ wires of speakers to the car chassis or Ground wire

(black), or connect them in parallel.

•

Mount the unit at an angle of less than 30º.

•

If your vehicle wiring harness does not have the ignition terminal, connect

Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key.

•

Keep all cables away from heat dissipate metal parts.

INSTALLATION / CONNECTION

•

After the unit is installed, check whether the brake lamps, blinkers, wipers, etc.

on the car are working properly.

•

If the fuse blows, first make sure the wires are not touching car’s chassis, then

replace the old fuse with one that has the same rating.

Basic procedure 1

Remove the key from the ignition switch, then disconnect the [ terminal of the car battery.

2 Connect the wires properly.

See Wiring connection. (

13)

3 Install the unit to your car.

See Installing the unit (in-dash mounting).

4 Connect the [ terminal of the car battery. 5 Reset the unit. ( 

)

Installing the unit (in-dash mounting)

Hook on the top side

Orientate the trim plate as illustrated before fitting.

How to remove the unit 1

Detach the faceplate.

2 Fit the catch pin on the extraction

keys into the holes on both sides of the trim plate, then pull it out.

3 Insert the extraction keys deeply

into the slots on each side, then follow the arrows as shown on the right.

Do the required wiring. (

13)

Dashboard of your car

Bend the appropriate tabs to hold the mounting sleeve firmly in place.

+ 32 hidden pages