Kenwood KDS-P901 User Manual
KDS-P901
5.1ch DVD SURROUND PROCESSOR
INSTRUCTION MANUAL
PROCESSEUR SURROUND DVD à 5.1 canaux
MODE D’EMPLOI
5.1 Kan. DVD-SURROUND-PROZESSOR
BEDIENUNGSANLEITUNG
5.1 kan DVD-SURROUNDPROCESSOR
GEBRUIKSAANWIJZING
5.1 canale DVD SURROUND PROCESSOR
ISTRUZIONI PER L’USO
PROCESADOR SURROUND DVD de 5.1 canales
MANUAL DE INSTRUCCIONES
5.1 聲道 DVD 環繞音效處理器
使用說明書
5.1 声道 DVD 环绕音效处理器
使用说明书使用说明书
使用说明书
使用说明书使用说明书
© PRINTED IN JAPAN B64-1781-00/01 (W)
2-English
Installation
Connecting Cables to Terminals (MZ-BUS connection)
TO MZ-BUS
HEAD UNIT
PROTOCOL SWITCH
BUS OTHER
TO OTHER
HEAD UNIT
TO NAV.I/F TO ANTENNA TO 5L I/F TO MZ-BUSTO MONITOR
"1"}
1-CH-2
M 4
DVD player unit
Connection cable (5.5m:Accessory q)
Optical cable (6m:Accessory r)
Receiver unit (front side)
MZ-BUS Disc Changer
MZ-BUS Disc Changer
(C929)
KDS-P901
Put the protection caps removed
from the unit into the unused
terminals in the KDS-P901.
NOTE
Protection cap
DVD player unit & Receiver unit:
KVT-910DVD/920DVD/930DVD/940DVD/960DVD
Connection cable (Provided with the disc changer)
When connecting the C929 optical cable, be
sure to set the selector switch to 1.
2CAUTION
Audio cable (Commercially available part)
(Black)
(Black)
English-3
DIGITAL IN
CD-CH 1
DIGITAL IN
DVD
REAR
R
REAR
L
LINE 1
R
LINE 1
L
(AUX)
FRONT
R
FRONT
L
CENTER
SUBW
T
H
LINE 2
R
LINE 2
L
OUTPUT
INPUT
FM /AM
ANTENNA
AV INPUT
AV INPUT
L R
L R
1
2
VIDEO
VIDEO FRONT REAR
PREOUT
NON-FAD
AV OUTPUT POWER
TO MONITOR UNIT
L R
LR
VIDEO
L L L
R R R
30R
REAR
R
REAR
L
LINE 1
R
LINE 1
L
(AUX)
FRONT
R
FRONT
L
CENTER
SUBW
LINE 2
R
LINE 2
L
OUTPUT
INPUT
Subwoofer preout
Center Speaker preout
Front left output (white)
Front right output (red)
Rear left output (white)
Rear right output (red)
Left input 1 (white)
Right input 1 (red)
(rear side)
(front side)
Receiver unit (rear side)
When handling an optical cable for wiring, use
care not to exceed the minimum cable bend
radius of 30 mm.
If you exceed the minimum bend limit, optical
fibers within the optical cable may be damaged.
When installing the DVD player unit on the
vehicle, ensure that the optical cable is not
stuck between the DVD player unit and vehicle
parts.
2CAUTION
Optical cable (Provided with the C929)
Audio cable
(6m:Accessory i)
Leave the output terminals on the receiver unit
open.
NOTE
Set the PROTOCOL SWITCH to the "BUS" side.
After the PROTOCOL SWITCH is switched, be
sure to reset the control unit.
Don’t connect anything to the "TO OTHER
HEAD UNIT" terminal.
2CAUTION
Left input 2 (white)
Right input 2 (red)
(Green)
(Green)
KDS-P901 (rear side)
PROTOCOL SWITCH
BUS OTHER
Loading...