Kenwood KDC-X695, KDC-X395, KDC-BT648U, KDC-348U User Manual

KDC-BT648U KDC-X695 KDC-X395 KDC-348U

CD-RECEIVER

INSTRUCTION MANUAL

AMPLI-TUNER LECTEUR DE CD

MODE D’EMPLOI

REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM

MANUAL DE INSTRUCCIONES

Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDC-BT648U/ KDC-X695/ KDC-X395/ KDC-348U Serial number

US Residents Only

CONTENTS

Safety 3

Maintenance

Preparation 4

How to attach/detach the faceplate How to reset your unit How to prepare the remote controller

(RC-405)

Getting Started 5

Canceling the display demonstration Setting the demonstration mode Adjusting the clock Initial settings before operations

Basic Operations 6

Muting upon the reception of a phone call

Listening to the Radio 8

Adjust [SETTINGS] mode settings

Listening to the other external components 9

Listening to a Disc/ USB device/ iPod 10

Start playing a disc Start playing a USB device or iPod Removing the USB device or iPod Start playing the disc changer Selecting Repeat Play Selecting Random Play All Random Play Selecting Magazine Random Play Selecting Scan Play Selecting a folder/track/file Alphabet Search for iPod Direct Music Search using the remote

controller (RC-405)

Direct Disc Search using the remote

controller (RC-405) My Playlist for iPod iPod control by Hand mode Adjust [SETTINGS] mode settings

Operation of Hands-Free Phoning 15

Getting Started Making a Call Receiving a Call During a Call Call Waiting Downloading the Phone Book

Bluetooth Setup 18

Easy Pairing function Registering Bluetooth Device (Pairing) Selecting the Bluetooth Device Setting a Voice Command Bluetooth Setup

SMS (Short Message Service) 23

Downloading the SMS Display the SMS

HD Radio™ Tuner Control 24

Direct Access Tuning using the remote

controller (RC-405) iTunes Tagging Adjust [SETTINGS] mode settings

Satellite Radio Tuner Control 26

Category and Channel Search Channel Scan Direct Access Tuning using the remote

controller (RC-405) Adjust [SETTINGS] mode settings

Function settings 28

Installation/connection 30

Troubleshooting 34

Specifications 37

2 English

Safety

WARNING

Stop the car before operating the unit.

Important to know...

■

To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.

■

Caution: Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident.

■

Condensation: When the car is airconditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate.

■

The illustrations in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the illustrations may differ from what appears on the actual equipment.

■

If you experience problems during installation, consult your Kenwood dealer.

■

When you purchase external components, check with your Kenwood dealer to make sure that they work with your model and in your area.

Maintenance

Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit. Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a cotton swab or cloth.

■

The “AAC” logo is a trademark of Dolby Laboratories.

■

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners.

■

Ready to receive HD Radio™ broadcasts when connected to the KTC-HR300/ KTCHR200/ KTC-HR100TR, sold separately.

■

“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

■

iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

■

iTunes is a trademark of Apple Inc.

This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful influence on the environment.

English 3

Preparation

How to attach/detach the faceplate

■

Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing.

■

Keep the faceplate in its casing while detached.

■

The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.

■

To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers.

How to reset your unit

If this unit fails to operate

Reset button

properly, press the reset button. The unit returns to factory

settings when the reset button is pressed.

How to prepare the remote controller (RC-405)

When you use the remote controller for the first time, pull out the insulation sheet.

Insulation sheet

If the effectiveness of the remote controller decreases, replace the battery.

Caution:

■

Do not set the remote control in hot places such as on the dashboard.

■

Lithium battery. Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

■

The battery pack or batteries shall not be exposed to excessive heat such sunshine, fire or the like.

■

Keep battery out of reach of children and in original package until ready to use. Dispose of used batteries promptly. If swallowed contact physician immediately.

4 English

CALIFORNIA, USA ONLY

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/ perchlorate

Getting Started

Canceling the display demonstration

The display demonstration is always turned on unless you cancel it.

When you turn on the power (or after you reset the unit), the display shows:

[CANCEL DEMO] \ [PRESS] \ [VOLUME KNOB]

1 Press the volume knob.

[YES] is selected as the initial setup.

2 Press the volume knob again to confirm.

[DEMO OFF] appears.

■

If no operation is done for about 15 seconds or if you turn the volume knob to select [NO] in step 2, [DEMO MODE] appears and the display demonstration starts.

Setting the demonstration mode

1 Press the volume knob to enter

[FUNCTION].

2 Turn the volume knob to select [DEMO

MODE], then press to enter.

3 Turn the volume knob to select [ON] or

[OFF].

If [ON] is selected, display demonstration starts if no operation is done for about 20 seconds.

4 Hold to finish the procedure.

Adjusting the clock

1 Press the volume knob to enter

[FUNCTION] mode.

2 Turn the volume knob to select

[SETTINGS], then press to enter.

3 Turn the volume knob to select [CLOCK],

then press to enter.

4 Turn the volume knob to select [CLOCK

ADJUST], then press to enter.

Clock hour flashes on the display.

5 Turn the volume knob to adjust the hour,

then press to enter minute adjustment.

Clock minutes flashes on the display.

6 Turn the volume knob to adjust the

minute, then press to confirm.

Press 4 / ¢ to move between the hour and minute adjustment.

7 Hold to finish the procedure.

Initial settings before operations

1 Press SRC to enter [STANDBY] mode. 2 Press the volume knob to enter

[FUNCTION] mode.

3 Turn the volume knob to select [INITIAL

SET], then press to enter.

4 Turn the volume knob to make a

selection, then press to confirm.

See table below for selection.

5 Hold to finish the procedure.

Item Selectable setting (Preset: *)

PRESET TYPE NORMAL *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;

MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ AM) and

another Satellite Radio Tuner.

KEY BEEP ON */ OFF: Activates/deactivates the keypress tone. BUILT-IN AUX ON1 *: Outputs sound of the connected external component through the car speakers when “AUX” is selected as the

source. ; ON2: Outputs sound from the connected external component when “AUX” is selected as the source. When you turn on the power, the sound attenuates (to prevent noise when no external component is connected). Turn the volume knob clockwise to return to the previous volume level. ; OFF: Disables “AUX” in source selection.

CD READ 1*: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No sound can

be heard if an audio file disc is played.

SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance. F/W UP xx.xx YES: Starts upgrading the firmware. ; NO *: Cancels (upgrading is not activated).

For details on how to update the firmware, see: www.kenwood.com/cs/ce/

English 5

Basic Operations

Remote sensor

■

Do not expose to bright sunlight.

Loading slot

Ejects the disc

Volume knob

Detaches the faceplate

The following indicator lights up when...

ST: A stereo broadcast is received. RDS: Radio Data System service is available. TI: Traffic Information function is turned on. IN: A disc is in the unit. ATT: The sound attenuates. EQ: [SYSTEM Q] is set to an EQ mode other

than [NATURAL]. (page 28)

B.BOOST: [BASS BOOST] is set to [1] or [2].

(page 28)

: Indicates that the Music Search mode is

selected now.

BT: Bluetooth cell-phone connection status.

The illustration and button names used for explanation in this manual are of KDC-BT648U/ KDC-X695 (unless mentioned otherwise). Refer to the table below for the difference:

Display window

USB terminal

Auxiliary input jack

Slide open the cover

KDC-BT648U/ KDC-X695

KDC-X395/ KDC-348U

6 English

When you press or hold the following button(s)...

Main unit

SRC

Remote

controller

—

SRC

■

Turns on.

■

Turns off if pressed and held.

Selects the available sources (TUNER, USB or iPod, CD, AUX, STANDBY), if the power is turned on.

• If the source is ready, playback also starts. “iPod” and “CD” are selectable only when an iPod is connected or a disc is loaded.

Volume knob

(turn)

Volume knob

VOLud

5 / ∞ Selects items.

ENT 38 Confirms selection.

(press)

BAND

*AM– /

#FM+

6 (38)ENT 38

4 / ¢

+¢

SCRL DISP —

—

Adjusts the volume level.

Enters [FUNCTION] settings.

■

Selects the FM bands (FM1/ FM2/ FM3) or AM.

■

Selects the next folder. (Press *AM– on remote controller to select the previous folder.)

Pauses/resumes playback of a disc/ USB device/ iPod.

■

Searches for radio station.

■

Selects track/file.

■

Fast-forwards/reverses tracks/files if pressed and held.

■

Changes the display information.

■

Scrolls the display information if pressed and held.

■

Enters clock adjustment mode directly (page 5) if pressed and held while in clock display screen.

KDC-BT648U/ KDC-X695 only:

■

Enters Bluetooth mode. (page 15)

■

Press to answer an incoming call.

■

—

Enters Bluetooth easy pairing mode if pressed and held. (page 18)

KDC-X395/ KDC-348U only:

■

iPod —

Selects “iPod” source.

■

Switches the controlling terminal (HANDS ON/ HANDS OFF) for iPod playback if pressed and held. (page 13)

—AUD

—ATT

Enters [AUDIO CONTROL] settings directly. Attenuates the sound.

• To return to the previous level, press the button again.

Returns to the previous item.

General operation

EXIT

Exit from setting mode.

• Press and hold

on the main unit will also exit from the setting

mode.

English 7

Muting upon the reception of a phone call (KDC-X395/ KDC-348U only)

To use this feature, connect the MUTE lead to your telephone using a commercial telephone accessory. (See “Installation Manual” on a separate volume.)

When a call comes in, “CALL” appears.

■

The audio system pauses.

■

To continue listen to the audio system during a call, press SRC. “CALL” disappear and the audio system resumes.

When a call ends, “CALL” disappear.

■

The audio system resumes.

Listening to the Radio

■

Hold for about 2 seconds to memorize the current station or the selected Program Type. (Refer to [PTY SEARCH] on the table below to select the Program Type.)

■

Press briefly to recall memorized station (or Program Type after entering the PTY search mode).

1 Press SRC to select “TUNER”. 2 Press BAND repeatedly to select a band

(FM1/ FM2/ FM3/ AM).

3 Press 4 / ¢ to search for a station.

Using the remote controller (RC-405) #FM+ / *AM– : Selects band.

4 / +¢ : Selects station. 1 – 6 : Selects preset station.

Adjust [SETTINGS] mode settings

While listening to the radio...

1 Press the volume knob to enter

[FUNCTION] mode.

2 Turn the volume knob to select

[SETTINGS], then press to enter.

3 Turn the volume knob to make a

selection, then press to confirm.

See table below for selection.

4 Hold to finish the procedure.

Item Selectable setting (Preset: *)

SEEK MODE Selects the tuning mode for 4 / ¢ buttons.

AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset memory. ; MANUAL: Manually search for a station.

AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing is

not activated). (Selectable only if [NORMAL] is selected for [PRESET TYPE].) (page 5)

TI ON: The traffic information automatically when the traffic bulletin starts. ; OFF *: Cancels. (Not applicable if “AM”

is selected)

8 English

Item Selectable setting (Preset: *)

MONO SET ON: Improves the FM reception (but the stereo effect may be lost). ; OFF *: Cancels (stereo effect resumes).

PTY SEARCH Selects the available Program Type (page 9). Then, press

■

[TI] is selectable only when the source is “FM”. If other playback source is selected, these settings are selectable under [TUNER SET] item. (page 29)

■

Available Program Type:

SPEECH;

OLDIES; SOFT; NOSTALGA; JAZZ; CLASSICL; R & B; SOFT R&B

(personality); PUBLIC; COLLEGE; WEATHER The unit will search for the Program type categorized under [SPEECH] or [ [SPEECH] : Roman typeface item. ; [

■

The Radio Data System feature won’t work where the service is not supported by any broadcasting station.

■

If the volume is adjusted during reception of traffic information, the adjusted volume is memorized automatically. It will be applied the next time Traffic Information function is turned on.

MUSIC

; NEWS; INFORM; SPORTS; TALK;

ROCK; CLS (classic) ROCK; ADLT (adult) HIT; SOFT RCK (rock); TOP 40; COUNTRY

MUSIC

] : Italic typeface item.

; LANGUAGE;

REL (religious) MUSC

MUSIC

to start searching.

;

; REL (religious) TALK; PERSNLTY

] if selected.

Listening to the other external components

Preparation : Make sure [ON1] or [ON2] is selected for [BUILT-IN AUX]. (page 5)

1 Press SRC to select “AUX”. 2 Turn on the external component and

start playing.

3 Turn the volume knob to adjust the

volume.

Auxiliary input jack

Portable audio device (commercially available)

3.5 mm (1/8”) stereo mini plug (commercially available)

English 9

Listening to a Disc/ USB device/ iPod

Ejects the disc. (“NO DISC” appears and “IN” indicator goes off.)

■

Press to select track/file.

■

Hold to fast-forwards/reverses.

■

Press to select next folder of Audio File/iPod.

■

Press to select next disc of CD changer.

Press to pause. Press again to resume playback.

USB terminal

Start playing a disc

1 Press SRC to turn on the power. 2 Insert a disc into the loading slot.

Playback starts automatically.

Start playing a USB device or iPod

1 Press SRC to turn on the power. 2 Slide open the cover. 3 Connect a USB device or iPod to the USB

terminal.

The source automatically switches, and playback starts.

USB device (commercially available)

CA-U1EX (optional accessory)

Apple iPod (commercially available)

KCA-iP102 (optional accessory)

Removing the USB device or iPod

1 Press SRC to select a source other than

“USB” or “iPod”.

2 Remove the USB device or iPod.

Start playing the disc changer

1 Press SRC to turn on the power. 2 Press SRC to select “CD CHANGER”.

10 English

Selecting Repeat Play

Press number button 4 (REP) repeatedly to make a selection.

Audio CD : TRACK REPEAT, REPEAT OFF Audio File :

FILE REPEAT, FOLDER REPEAT, REPEAT OFF

iPod :

FILE REPEAT, REPEAT OFF

CD changer : TRACK REPEAT, DISC REPEAT,

REPEAT OFF

Selecting Random Play

Press number button 3 (ALL RDM) repeatedly to make a selection.

Audio CD : DISC RANDOM, RANDOM OFF Audio File/ iPod :

FOLDER RANDOM, RANDOM OFF

CD changer : DISC RANDOM, RANDOM OFF

All Random Play

Press and hold number button 3 (ALL RDM).

Pressing this button again plays songs in the normal mode starting.

Audio File/ iPod :

ALL RANDOM, RANDOM OFF

■

Changes the iPod browsing item to “songs”.

Selecting Magazine Random Play

Press number button 5 repeatedly to make a selection.

CD changer : MGZN (magazine) RANDOM,

RANDOM OFF

Selecting Scan Play

Press number button 2 (SCAN) repeatedly to make a selection.

Audio CD : TRACK SCAN, SCAN OFF Audio File : FILE SCAN, SCAN OFF CD changer : TRACK SCAN, SCAN OFF

■

If scan play is selected, the unit starts playing the first 10-second intro of the music in the disc/current folder. If “SCAN OFF” is selected, the unit resumes normal play of the current song.

Selecting a folder/track/file

• Not available if disc changer playback is selected.

1 Press to enter Music Search mode.

“SEARCH” appears, then the current file name appears on the display.

2 Turn the volume knob to select a folder/

track/ file, then press to confirm.

■

To skips songs, press 4/ ¢. Holding 4/ ¢ skips songs at 10% regardless of

the setting made. (page 13) This operation is effective only for the iPod or Kenwood Music Editor media.

■

To return to the root folder (audio file), top menu (iPod) or first track (audio CD), press BAND.

■

To return to the previous folder, press .

■

To cancel the Music Search mode, press and hold

■

< or > on the display indicates that

preceded/next item is available.

Alphabet Search for iPod

1 Press to enter Music Search mode.

“SEARCH” appears.

2 Turn the volume knob to select a

category, then press to confirm.

3 Press again to enter alphabet search

mode.

“SEARCH <– – –>” appears.

4 Turn the volume knob to select the

character to be searched for.

5 Press 4 / ¢ to move to the entry

position.

You can enter up to three characters.

6 Press the volume knob to start searching.

After this step, see step 2 of <Selecting a folder/track/file> (page 11) to select a song.

■

To return to the Music Search mode, press

■

To cancel the Music Search mode, press and hold

■

A longer searching time is required if there are many songs or playlists in the iPod.

Continued to next page

English 11

■

To search for a character other than A to Z and 0 to 9, enter only “ * ”.

■

The article (a, an, the) of songs name will be skipped during search.

Direct Music Search using the remote controller (RC-405)

• Not available if Random Play, Scan Play, KENWOOD Music Editor media, iPod playback is selected.

1 Press DIRECT to enter Direct Music

Search mode.

“– – –” appears.

2 Press the number buttons to enter the

track number.

3 Press 4 / +¢ to search for the music.

■

To cancel the Direct Music Search mode, press

Direct Disc Search using the remote controller (RC-405)

• Only when the source is CD changer.

• Not available if Random Play, Scan Play is selected.

1 Press DIRECT to enter Direct Disc Search

mode.

“– –” appears.

2 Press the number buttons to enter the

disc number.

3 Press #FM+ / *AM– to search for the disc.

■

To cancel the Direct Disc Search mode, press

Using the remote controller (RC-405)

In playback mode:

#FM+ / *AM– : Selects folder/disc. 4 / +¢ : Selects track/file. ENT 38 : Pauses/resumes playback.

In Music Search mode:

ENT 38 : Confirms selection. 5 / ∞ : Selects folder/file/track.

: Returns to the previous folder.

My Playlist for iPod

Registering songs in the playlist

1 Select and play the song you want to

2 Press and hold number button

5 (MEMO MY LIST) to register.

“## STORED” (registration number) appears. You can register up to 10 songs. “MEMORY FULL” appears, if you try to register the eleventh song.

■

If you attempt to register a song from a different iPod, “NO INFO” followed by “MPLIST DELETE” appears. To delete the playlist, turn the volume knob to select “YES”, then press to confirm.

■

You can also register the song displayed in the Music Search mode by following the same procedure.

■

Do not register Podcasts.

Playing a song on the playlist

1 Press number button

5 (MEMO MY LIST) to display the playlist.

“MY PLAYLIST” appears.

2 Turn the volume knob to select the song

you want, then press to confirm.

■

Random play cannot be performed during playback of a song in the playlist.

Deleting a song on the playlist

1 Press number button 5 (MEMO MY LIST)

to display the playlist.

“MY PLAYLIST” appears.

2 Turn the volume knob to select the song

you want to delete, then press and hold the volume knob.

3 Turn the volume knob to select [DELETE

ONE] or [DELETE ALL], then press to

confirm.

Select “DELETE ALL” to delete all the songs in the playlist.

4 Turn the volume knob to select [YES],

then press to confirm.

“COMPLETED” appears.

12 English

iPod control by Hand mode

Press number button 1 (iPod) repeatedly to make a selection.

KDC-X395 / KDC-348U

Press and hold iPod repeatedly to make a selection.

HANDS ON :

Control iPod from the iPod.

■

This mode is not compatible with music information display. The display will show “iPod MODE”.

HANDS OFF: Control iPod from the unit.

Adjust [SETTINGS] mode settings

While listening to an iPod or KENWOOD Music Editor media ...

1 Press the volume knob to enter

[FUNCTION] mode.

2 Turn the volume knob to select

[SETTINGS], then press to enter.

3 Turn the volume knob to make a

selection, then press to confirm.

See the following table for selection.

4 Hold to finish the procedure.

Item Selectable setting (Preset: *)

SKIP SEARCH 0.5% */ 1%/ 5%/ 10%: Sets the ratio of skip

when searching for a song in Music Search mode.

MPLIST DELETE

■

[MPLIST DELETE] is selectable only when the source is “iPod”.

YES: Deletes the saved My Playlist. ; NO *: Cancels.

Handling discs

■

Do not touch the recording surface of the disc.

■

Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

■

Do not use any accessories for the disc.

■

Clean from the center of the disc and move outward.

■

Clean the disc with a dry silicon or soft cloth. Do not use any solvents.

■

When removing discs from this unit, pull them out horizontally.

■

Remove the rims from the center hole and disc edge before inserting a disc.

Discs that cannot be used

■

This unit can only play the CDs with:

■

Discs that are not round.

■

Discs with coloring on the recording surface or discs that are dirty.

■

You cannot play a Recordable/ReWritable disc that has not been finalized. (For the finalization process refer to your disc writing software, and your disc recorder instruction manual.)

■

3-inch CD cannot be used. Attempt to insert using an adapter can cause malfunction.

About Audio file

■

Playable Audio file : MP3 (.mp3), WMA (.wma) : AAC-LC (.m4a) KDC-BT648U/ KDC-X695

only

■

Playable disc media: CD-R/RW/ROM

■

Playable disc file format: ISO 9660 Level 1/2, Joliet, Romeo, Long file name.

■

Playable USB device file system: FAT16, FAT32

Continued to next page

English 13

+ 28 hidden pages