Kenwood KDC-BT39DAB, KDC-DAB35U User Manual

KDC-BT39DAB KDC-DAB35U

CD-RECEIVER

INSTRUCTION MANUAL

AMPLI-TUNER LECTEUR DE CD

MODE D’EMPLOI

CD-RECEIVER

BEDIENUNGSANLEITUNG

CD RECEIVER

GEBRUIKSAANWIJZING

SINTOLETTORE STEREO COMPACT DISC

ISTRUZIONI PER L’USO

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Information sur l’élimination des anciens équipements électriques et électroniques et piles électriques (applicable dans les pays qui ont adopté des systèmes de collecte sélective)

Les produits et piles électriques sur lesquels le pictogramme (poubelle barrée) est apposé ne peuvent pas être éliminés comme ordures ménagères. Les anciens équipements électriques et électroniques et piles électriques doivent être recyclés sur des sites capables de traiter ces produits et leurs déchets. Contactez vos autorités locales pour connaître le site de recyclage le plus proche. Un recyclage adapté et l’élimination des déchets aideront à conserver les ressources et à nous préserver des leurs effets nocifs sur notre santé et sur l’environnement. Remarque: Le symbole “Pb“ ci-dessous sur des piles électrique indique que cette pile contient du plomb.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien (anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss. Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen Entsorgungsbetrieben. Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei enthalt.

Informatie over het weggooien van elektrische en elektronische apparatuur en batterijen (particulieren)

Dit symbool geeft aan dat gebruikte elektrische, elektronische producten en batterijen niet bij het normale huishoudelijke afval mogen. Lever deze producten in bij de aangewezen inzamelingspunten, waar ze gratis worden geaccepteerd en op de juiste manier worden verwerkt, teruggewonnen en hergebruikt. Voor inleveradressen zie www.nvmp.nl, www.ictmilieu.nl, www.stibat.nl. Wanneer u dit product op de juiste manier als afval inlevert, spaart u waardevolle hulpbronnen en voorkomt u potentiële negatieve gevolgen voor de volksgezondheid en het milieu, die anders kunnen ontstaan door een onjuiste verwerking van afval. Opgelet: Het teken “Pb” onder het teken van de batterijen geeft aan dat deze batterij lood

bevat.

Informazioni sullo smaltimento delle vecchie apparecchiature elettriche ed elettroniche e delle batterie (valide per i paesi che hanno adottato sistemi di raccolta differenziata)

I prodotti e le batterie recanti il simbolo di un cassonetto della spazzatura su ruote barrato non possono essere smaltiti insieme ai normali rifiuti di casa. I vecchi prodotti elettrici ed elettronici e le batterie devono essere riciclati presso un'apposita struttura in grado di trattare questi prodotti e di smaltirne i loro componenti. Per conoscere dove e come recapitare tali prodotti nel luogo a voi più vicino, contattare l'apposito ufficio comunale. Un appropriato riciclo e smaltimento aiuta a conservare la natura e a prevenire effetti nocivi alla salute e all'ambiente. Nota: Il simbolo “Pb” sotto al simbolo delle batterie indica che questa batteria contiene

piombo.

For Israel

For Turkey

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir.

Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (atık yan ürün toplama sistemlerini kullanan ülkeleri için uygulanabilir)

Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak atılamaz. Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da yardımcı olacaktır.

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Marquage des produits utilisant un laser

L’étiquette est attachée au châssis/boîtier de l’appareil et indique que l’appareil utilise des rayons laser de classe 1. Cela signifie que l’appareil utilise des rayons laser d’une classe faible. Il n’y a pas de danger de radiation accidentelle hors de l’appareil.

Kennzeichnung von Geräten mit Laser-Abtastern

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts besteht.

Markering op produkten die laserstralen gebruiken

Dit label is aangebracht op de behuizing/houder en toont dat de component een laserstraal gebruikt die als Klasse 1 is geclassificeerd. Dit betekent dat de laserstraal relatief zwak is en er geen gevaar van straling buiten het toestel is.

Etichetta per i prodotti che impiegano raggi laser

L’etichetta si trova sul rivestimento o sulla scatola e serve ad avvertire che il componente impiega raggi laser che sono stati classificati come classe 1. Ciò significa che l’apparecchio utilizza raggi laser di una classe inferiore. Non c’è alcun pericolo di radiazioni pericolose all’esterno dell’apparecchio.

Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU Representative:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Déclaration de conformité vis à vis de la Directive 1999/5/CE de R&TTE Déclaration de conformité se rapportant à la directive EMC 2004/108/EC Déclaration de conformité se rapportant à la directive RoHS 2011/65/EU

Fabricant:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Représentants dans l’UE:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Konformitätserklärung in Bezug auf die R&TTE-Vorschrift 1999/5/EC Konformitätserklärung in Bezug auf die EMC-Vorschrift 2004/108/EC Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU

Hersteller:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU-Vertreter:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Conformiteitsverklaring met betrekking tot de R&TTErichtlijn van de Europese Unie (1999/5/EC) Conformiteitsverklaring met betrekking tot de EMC-richtlijn van de Europese Unie (2004/108/EC) Conformiteitsverklaring met betrekking tot de RoHS richtlijn van de Europese Unie (2011/65/EU)

Fabrikant:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU-vertegenwoordiger:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, Nederland

Dichiarazione di conformità alla Direttiva R & TTE 1999/5/CE Dichiarazione di conformità relativa alla direttiva EMC 2004/108/CE Dichiarazione di conformità relativa alla direttiva RoHS 2011/65/EU

Produttore:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Rappresentante UE:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

iii

English

Hereby, JVC KENWOOD declares that this unit KDC-BT39DAB is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Français

Par la présente JVC KENWOOD déclare que l’appareil KDC-BT39DAB est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Par la présente, JVC KENWOOD déclare que ce KDC-BT39DAB est conforme aux exigences essentielles et aux autres dispositions de la directive 1999/5/CE qui lui sont applicables.

Deutsch

Hiermit erklärt JVC KENWOOD, dass sich dieser KDC-BT39DAB in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet. (BMWi) Hiermit erklärt JVC KENWOOD die Übereinstimmung des Gerätes KDC-BT39DAB mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richitlinie 1999/5/EG. (Wien)

Nederlands

Hierbij verklaart JVC KENWOOD dat het toestel KDC-BT39DAB in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze verklaat JVC KENWOOD dat deze KDC-BT39DAB voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.

Italiano

Con la presente JVC KENWOOD dichiara che questo KDC-BT39DAB è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Español

Por medio de la presente JVC KENWOOD declara que el KDC-BT39DAB cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/ CE.

Português

JVC KENWOOD declara que este KDC-BT39DAB está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.

Polska

JVC KENWOOD niniejszym oświadcza, że KDC-BT39DAB spełnia zasadnicze wymogi oraz inne istotne postanowienia dyrektywy 1999/5/EC.

Český

JVC KENWOOD tímto prohlašuje, že tento KDC-BT39DAB je ve shode se základními požadavky a dalšími príslušnými ustanoveními smernice 1999/5/ES.

Magyar

Alulírott, JVC KENWOOD, kijelenti, hogy a jelen KDC-BT39DAB megfelel az 1999/5/EC irányelvben meghatározott alapvető követelményeknek és egyéb vonatkozó előírásoknak.

Svenska

Härmed intygar JVC KENWOOD att denna KDC-BT39DAB stär l överensstämelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Suomi

JVC KENWOOD vakuuttaa täten että KDC-BT39DAB tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.

Slovensko

S tem JVC KENWOOD izjavlja, da je ta KDC-BT39DAB v skladu z osnovnimi zahtevami in ostalimi ustreznimi predpisi Direktive 1999/5/EC.

Slovensky

Spoločnosť JVC KENWOOD týmto vyhlasuje, že KDC-BT39DAB spĺňa zákldné požiadavky a ďalšie prislušné ustanovenia Direktĺvy 1999/5/EC.

Dansk

Undertegnede JVC KENWOOD erklærer harved, at følgende udstyr KDC-BT39DAB overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Ελληνικά

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ JVC KENWOOD ΔΗΛΩΝΕΙ ΟΤΙ KDC-BT39DAB ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/EK.

Eesti

Sellega kinnitab JVC KENWOOD, et see KDC-BT39DAB vastab direktiivi 1999/5/EC põhilistele nõudmistele ja muudele asjakohastele määrustele.

Latviešu

Ar šo, JVC KENWOOD, apstiprina, ka KDC-BT39DAB atbilst Direktīvas 1999/5/EK galvenajām prasībām un citiem tās nosacījumiem.

Lietuviškai

Šiuo, JVC KENWOOD, pareiškia, kad šis KDC-BT39DAB atitinka pagrindinius Direktyvos 1999/5/EB reikalavimus ir kitas svarbias nuostatas.

Malti

Hawnhekk, JVC KENWOOD, jiddikjara li dan KDC-BT39DAB jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.

Українська

Компанія JVC KENWOOD заявляє, що цей виріб KDC-BT39DAB відповідає ключовим вимогам та іншим пов’язаним положенням Директиви 1999/5/EC.

Turkish

Bu vesileyle JVC KENWOOD, KDC-BT39DAB ünitesinin, 1999/5/ EC Direktifinin başlıca gereksinimleri ve diğer ilgili hükümleri ile uyumlu olduğunu beyan eder.

Русский

Настоящим, JVC КЕНВУД декларирует, что это устройство “KDC-BT39DAB” соответствует необходимым требованиям и другим важным положениям директивы 1999/5/EC.

Україна

Цим, JVC KENWOOD декларує, що цей виріб “KDC-BT39DAB” Відповідає суттєвим вимогам та іншим відповідним пунктам Директиви 1999/5/EC.

CONTENTS BEFORE USE

BEFORE USE 2 BASICS 3 GETTING STARTED 4 DIGITAL RADIO (DAB) 5 ANALOG RADIO 7 CD / USB / iPod / ANDROID 9 BLUETOOTH®

(for )

11 AUX 16 AUDIO SETTINGS 17 DISPLAY SETTINGS 18 MORE INFORMATION 18 TROUBLESHOOTING 19 SPECIFICATIONS 21 INSTALLATION /

CONNECTION 23

How to read this manual

• Operations are explained mainly

using buttons on the faceplate of

• English language is used for

the display explanation in this manual.

• [

] indicates the selected items.

• (

XX) indicates references are

available on the stated page.

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

• USB rating is indicated on the main unit. To view, detach the faceplate.

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth. Cleaning the connector: Detach the faceplate and clean the connector

gently with a cotton swab, being careful not to damage the connector.

Handling discs:

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

• Do not use any accessories for the disc.

• Clean from the center of the disc and move outward.

• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

• When removing discs from this unit, pull them out horizontally.

• Remove burrs from the center hole and disc edge before inserting a disc.

( 3)

Connector (on the reverse side of the faceplate)

BASICS

Faceplate

Volume knob

(turn/press)

Detach button Display window

To On the faceplate

Turn on the power

Adjust the volume Turn the volume knob. Select a source

Change the display information

Press

• Press and hold to turn off the power.

Press

• For

Press

• Press and hold to scroll the current display information.

Loading slot

repeatedly.

Attach Detach

How to reset

Your preset adjustments will also be erased.

: Press DAB to select DAB directly.

ENGLISH

GETTING STARTED

Select the display language and cancel the demonstration

When you turn on the power (or after you reset the unit), the display shows: “SELLANGUAGE”

1 Turn the volume knob to select [

then press the knob.

[

ENG

] is selected for the initial setup.

Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME

KNOB”.

2 Press the volume knob.

[

YES

] is selected for the initial setup.

3 Press the volume knob again.

“DEMOOFF” appears.

Set the clock

Press the volume knob to enter [

1 2 Turn the volume knob to select [ 3 Turn the volume knob to select [ 4 Turn the volume knob to make the settings, then press the knob.

Day

Hour Minute

5 Turn the volume knob to select [ 6 Turn the volume knob to select [ 7 Press and hold to exit.

To return to the previous setting item, press .

“PRESS” “VOLUMEKNOB”

ENG

] (English) or [

FUNCTION

CLOCK

], then press the knob.

CLOCK ADJUST

CLOCK FORMAT 12H

], then press the knob.

] or [

24H

], then press the knob.

RUS

] (Russian),

(For )

While in clock display screen...

Press and hold to enter clock adjustment mode directly.

Then, perform step

Set the initial settings

Press repeatedly to enter STANDBY.

1 2 Press the volume knob to enter [

4 to set the clock.

FUNCTION

3 Turn the volume knob to make a selection (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

Default:

AUDIO CONTROL

SWITCH PREOUT

SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM

DISPLAY

EASY MENU

REAR/ SUB-W

a subwoofer are connected to the line out terminals on the rear (through an external amplifier).

or 4inches, 6×9inches or 6inches) or OEM speakers for optimum performance.

(For ) ON

entering [ remain as [

REAR/ SUBWOOFER

: Selects according to the speaker size (5inches

:Both display and button illumination change to white color when

FUNCTION

].;

COLORSELECT

OFF

] color. ( 18)

: Selects whether rear speakers or

:Both display and button illumination

GETTING STARTED

TUNER SETTING

DAB L-BAND

DAB ANT POWER ON

PRESET TYPE NORMAL

SYSTEM

KEY BEEP

SOURCE SELECT

BUILT-IN AUX

P-OFF WAIT

CD READ 1

F/W UPDATE

UPDATE SYSTEM / UPDATE BT (for

F/W UP xx.xx/ F/W UP xxxxx/ F/W UP Vxxx

CLOCK

CLOCK DISPLAY

ENGLISH

РУССКИЙ

:Receives L-BAND ensemble during digital audio reception.;

:Supplies power to the DAB antenna. Selects when using the supplied antenna (for

booster. (

LW/ DB1/ DB2/ DB3).; button, regardless of the selected band.

:Activates the keypress tone.;

:Enables AUX in source selection.;

Applicable only when the demonstration mode is turned off. Sets the duration when the unit will automatically turn off (while in standby mode) to save the battery.

20M

: 20minutes;

:Automatically distinguishes between audio file disc and music CD.; 2:Forces to play as a

music CD. No sound can be heard if an audio file disc is played.

YES

:Starts upgrading the firmware.; NO:Cancels (upgrading is not activated).

For details on how to update the firmware, see: www.kenwood.com/cs/ce/

:The clock time is shown on the display even when the unit is turned off.;

Selected language is use as the display langauge for [ (folder name, file name, song title, artist name, album name) if applicable.

OFF

:Cancels

).;

OFF

25)

:Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/

:Does not supply power. Selects when using passive antenna without

MIX

:Memorizes one station (digital radio or analog radio) for each preset

OFF

:Deactivates.

OFF

:Disables. ( 16)

40M

: 40minutes;

60M

: 60minutes;

) / UPDATE DAB1/ UPDATE DAB2

WAITTIME–––/ OFF–––

FUNCTION

] menu and Tag information

OFF

:Cancels.

:Cancels

DIGITAL RADIO (DAB)

About DAB (Digital Audio Broadcasting)

DAB is one of the digital radio broadcasting systems available today. It can deliver digital quality sound without any annoying interference or signal distortion. Furthermore, it can carry text, pictures and data. In contrast to FM broadcast, where each program is transmitted on its own frequency, DAB combines several programs (called “services”) to form one “ensemble.” The “primary component” (main radio station) is sometimes accompanied by a “secondary component” which can contain extra programs or other information.

Preparation:

1 Connect a DAB antenna to the DAB antenna jack.

( 24)

2 Press to select DAB. 3 Start the Service List update.

UPDATE).

“LIST UPDATE” appears and update starts.

“UPDATED” appears when update completes.

Updates take up to3 minutes. No interruption

(such as traffic information) is possible during updates.

• To cancel the Service List update: Press and hold (LIST UPDATE) or DAB again.

: Press and hold (LIST

: Press and hold DAB.

ENGLISH

DIGITAL RADIO (DAB)

Search for an ensemble

Press repeatedly to select DAB.

1 2 Press repeatedly to select DB1/ DB2/ DB3. 3 Press and hold S/T to search for an ensemble. 4 Press S/T to select an ensemble, service or component to

listen.

• To change the searching method for S/T: Press

repeatedly.

AUTO1 : Press S/T: Select an ensemble, service or component. Press and hold S/T: Automatically search for an

AUTO2 : Press S/T: Search for a preset station. MANUAL : Press S/T: Select an ensemble, service or component. Press and hold S/T: Manually search for an ensemble.

• To store a service: Press and hold one of the number buttons (1to6).

• To select a stored service: Press one of the number buttons (1to6).

ensemble.

Select a service

Enter Service Search mode.

: Press (LIST UPDATE).

: Press DAB.

2 Turn the volume knob or press J/K to select a service, then press

the knob.

To cancel the Service Search mode, press

or DAB.

Select a service by name

Enter Service Search mode.

: Press (LIST UPDATE).

: Press DAB.

2 Turn the volume knob quickly to enter Alphabet Search mode. 3 Turn the volume knob or press S/T to select the character to

be searched for.

Press J/K to go to the previous/next page.

4 Press the volume knob to start searching. 5 Turn the volume knob to select a service, then press the knob.

To cancel the Alphabet Search mode, press .

Other settings

Press the volume knob to enter [

FUNCTION

2 Turn the volume knob to make a selection (see the following

table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

Default:

TUNER SETTING

AF SET

TI ON

: While listening to DAB: Automatically switch to FM broadcasting the same program if the DAB signal becomes weak. It will switch back to DAB sound when the signal becomes strong again. While listening to FM: Automatically switch to DAB source broadcasting the same program (if available).;

OFF

:Cancels.

:Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up).;

OFF

:Cancels.

DIGITAL RADIO (DAB)

ANALOG RADIO

PTY SEARCH

ASW SELECT TRAVEL, WARNINGS, NEWS, WEATHER, EVENT, SPECIAL, RAD INFO, SPORTS, FINANCE

LIST UPDATE AUTO

PTY WATCH

RELATED SERV

CLOCK

TIME SYNC

•

Available Program Type:

SPEECH: NEWS, AFFAIRS, INFO

MUSIC

The unit will search for the Program Type categorized under [

•

If the volume is adjusted during reception of traffic information, announcement, alarm or news bulletin, the

adjusted volume is memorized automatically. It will be applied the next time traffic information, announcement, alarm or news bulletin is turned on.

Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language (

ENGLISH/ FRENCH/ GERMAN

Selects the available Program Type (see the following), then, press

Turn the volume knob to make a selection, then press the knob. “

” appears in front of the activated announcement type.

Automatically switch from any source to Digital radio ensembles broadcasting an activated announcement type.

•

Multiple announcement can be activated simultaneously.

•

To deactivate, press the volume knob again (“*” goes off).

:Automatically update the DAB Service List when the power is turned on.;

MANUAL

:Updates the DAB Service List by pressing and holding or

Automatically switch from any source to Digital Radio ensembles broadcasting a selected type of program.

NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED POPM

(music),

ROCKM

OTHERM

(music),

LEISURE, JAZZ, COUNTRY, NATIONM OFF

:Cancels.

:Enable Soft-Link function to switch to an alternative service which is different audio program

from the current audio program.;

:Synchronizes the unit’s time to the Digital Radio signal station time.;

WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT

POP M

(music),

JAZZ, COUNTRY, NATION M

ROCK M

(music),

WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL

(information),

(music),

EASY M

(music),

), then press the knob.

EASYM

(music),

LIGHTM

(music),

OLDIES, FOLKM

OFF

:Disable.

SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED

(music),

LIGHT M

OLDIES, FOLK M

SPEECH

(music),

(music)

] or [

S/T

(music),

CLASSICS, OTHER M

MUSIC

] if selected.

CLASSICS

DOCUMENT

OFF

to start.

DAB

:Cancels.

(music),

Search for a station

Press repeatedly to select TUNER.

1 2 Press repeatedly to select FM1/ FM2/

FM3/ MW/ LW.

3 Press S/T to search for a station.

• To change the searching method for S/T: Press

AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number

• To select a stored station: Press one of the number

repeatedly.

buttons (1to6).

Other settings

Press the volume knob to enter [

1 2 Turn the volume knob to make a selection

then press the knob.

3 Repeat step 2 until the desired item is selected or

activated.

FUNCTION

( 8)

4 Press and hold to exit.

To return to the previous setting item, press .

ENGLISH

ANALOG RADIO

TUNER SETTING

LOCAL SEEK

AUTO MEMORY

MONO SET ON

NEWS SET ON

REGIONAL ON

AF SET ON

TI* ON

PTY SEARCH

: Searches only stations with good reception.;

YES

:Automatically starts memorizing 6 stations with good reception.;

:Cancels.

•

Selectable only if [

:Improves the FM reception, but the stereo effect may be lost.;

OFF

:Cancels.

: The unit will temporarily switch to News Programme if available. ;

OFF

: Cancels.

: Switches to another station only in the specific region using the “AF”

control.;

: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor.;

:Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up).;

[TI] in MW/LW band is for enabling traffic interruption to DAB source

only.

Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language ( press the knob. Selects the available Program Type (see the following), then, press

S / T

OFF

:Cancels.

OFF

to start.

NORMAL

] is selected for [

:Cancels.

ENGLISH/ FRENCH/ GERMAN

OFF

:Cancels.

OFF

:Cancels.

PRESET TYPE

Default:

]. ( 5)

), then

• [

LOCAL SEEK

selectable only when the band is FM1/ FM2/ FM3.

• Available Program Type:

SPEECH : NEWS, AFFAIRS, INFO

MUSIC

The unit will search for the Program Type categorized under [

[

MUSIC

• If the volume is adjusted during reception of traffic information, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, alarm or news bulletin is turned on.

]/ [

MONO SET

]/ [

NEWS SET

]/ [

REGIONAL

]/ [

AF SET

]/ [

PTY SEARCH

CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT

POP M

(music),

CLASSICS, OTHER M OLDIES, FOLK M

] if selected.

(information),

ROCK M

(music),

(music)

(music),

SPORT, EDUCATE, DRAMA

EASY M

JAZZ, COUNTRY, NATION M

(music),

LIGHT M

(music),

SPEECH

] is

] or

CD / USB / iPod / ANDROID

Start playback

The source changes automatically and playback starts.

Eject disc

USB input terminal

USB

CA-U1EX (max.: 500mA) (optional accessory)

iPod/iPhone

KCA-iP102 / KCA-iP103 (optional accessory) or accessory cable of the iPod/iPhone

ANDROID

Micro USB 2.0 cable (commercially available)

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

Label side

To On the faceplate

Playback / pause Press .

Reverse / Fast-forward Select a track/file Select a folder

Repeat play

Press and hold S/T. Press S/T.

Press J/K. Press repeatedly.

TRACK REPEAT/ REPEAT OFF FILE REPEAT/ FOLDER REPEAT/ REPEAT OFF

FILE REPEAT/ REPEAT OFF

Random play

Press repeatedly.

DISC RANDOM/ RANDOM OFF FOLDER RANDOM/ RANDOM OFF

Press and hold

Select control mode

While in iPod source, press

MODE ON

: Control from the iPod

MODE OFF

: Control from the unit

While in ANDROID source,

Select music drive

( 10, [

MUSIC DRIVE])

Press repeatedly.

The stored songs in the following start playback.

• Selected internal or external memory of a smartphone (Mass Storage Class).

• Selected drive of a multiple drives device.

: Audio CD

: MP3/WMA/AAC/WAV file, iPod or

ANDROID

: KME Light/ KMC file

: Audio CD

: MP3/WMA/AAC/WAV file, KME Light/ KMC

file, iPod or ANDROID

to select

( 10, [

ALL RANDOM

repeatedly.

ANDROID SETUP])

ENGLISH

CD / USB / iPod / ANDROID

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. (

For ANDROID: Applicable only when [

For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ ANDROID.

For iPod/ ANDROID: Applicable only when [

KME Light : KENWOOD Music Editor Light, KMC : KENWOOD Music Control ( 18)

For CD: Only for MP3/WMA/AAC files.

You can still play/pause, file skip, fast-forward or reverse files from the unit.

BROWSE MODE

MODE OFF

] is selected. ( [

]/ [

BROWSE MODE

Select a file from a folder/list

Press .

1 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

For USB (for KME Light/ KMC files):

Press S/T to search at a preset skip search ratio. ( Press and hold S/T to search at a 10

ratio.

• Not applicable for CD and MP3/WMA/AAC/WAV files. For iPod:

You can search for a file according to the first character.

Turn the volume knob quickly to enter character search. Turn the volume knob to select the character.

To search for a character other than A to Z and 0to9, enter only “ * ”.

Press S/T to move to the entry position.

• You can enter up to 3characters. Press the volume knob to start searching.

• To return to the root folder/ first file/ top menu, press

• To return to the previous setting item, press

• To cancel, press and hold

• For iPod, applicable only when [

• For ANDROID, applicable only when [

MODE OFF

BROWSE MODE

] is selected. ( 9)

] is selected. ( [

19)

ANDROID SETUP

] is selected.

[

SKIP SEARCH

])

ANDROID SETUP

Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Other settings

Press the volume knob to enter [

FUNCTION

2 Turn the volume knob to make a selection (see the

following table), then press the knob.

3 Repeat step 2 until the desired item is selected or

activated.

4 Press and hold to exit.

To return to the previous setting item, press .

ANDROID SETUP

BROWSE MODE

application).;

: Control from the unit (using KENWOOD MUSIC PLAY

HAND MODE

:Control other media player applications from the Android device (without using KENWOOD MUSIC PLAY application). However, you can still play/pause and file skip from the unit.

USB

MUSIC DRIVE DRIVE CHANGE

:The next drive ([

DRIVE 1

selected automatically and playback starts. Repeat steps

SKIP SEARCH 0.5%/ 1%/ 5%/ 10%

to 3 to select the following drives.

: While listening to iPod, ANDROID or KME Light/ KMC file, selects the skip search ratio over the total files.

])

] to [

Default:

DRIVE 5

]) is

BLUETOOTH®

(for )

BLUETOOTH — Connection

Supported Bluetooth profiles

– Hands-Free Profile (HFP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP)

Supported Bluetooth codecs

– Sub Band Codec (SBC) – Advanced Audio Coding (AAC)

Connect the microphone

MIC (microphone input terminal)

Rear panel

Adjust the microphone angle

Secure using cord clamps (not supplied) if necessary.

Microphone (supplied)

Pair a Bluetooth device

When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit and the device.

1 Press to turn on the unit. 2 Search and select this unit model name (KDC-BT3

“PAIRING”

display.

“PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” scrolls on the

DAB) on the Bluetooth device.

• For some Bluetooth devices, you may need to enter the Personal Identification Number

(PIN) code immediately after searching.

• Refer also to the manual supplied with your Bluetooth device. 3 Press the volume knob to start pairing.

“PAIRING OK” appears when pairing is completed and “

connection is established.

• Up to five devices can be registered (paired) in total.

• Only one Bluetooth device can be connected at any time.

• This unit supports Secure Simple Pairing (SSP).

• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually. Refer to the instruction manual of the Bluetooth device for more information.

• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. To delete the paired device,

• When you connect iPhone/ iPod touch/ Android device to the USB input terminal, pairing request (via Bluetooth) is automatically activated. Press the volume knob to pair once you have confirmed the device name.

Automatic pairing request is activated only if:

– Bluetooth function of the connected devcie is turned on. – [

AUTO PAIRING

– KENWOOD MUSIC PLAY application is installed on the Android device.

] is set to [ON]. ( 15)

” will light up when the Bluetooth

15, [DEVICE DELETE

ENGLISH

BLUETOOTH®

BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call: – All the buttons and display flash. – The unit answers the call automatically if [

During a call: – The buttons and display illuminate according to the settings made for [ – If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.

To On the faceplate

Answer a call

Reject a call

End a call

Adjust the phone volume

[00]

[35]

(Default:

Switch between hands-free and private talk modes

Not applicable for iPhone. During a call, the unit synchronizes the phone volume on the iPhone to the unit.

[15]*

Press (1 to 6).

Press

Press Turn the volume knob during a call.

)

• This adjustment will not affect the volume of the other

Press

• Operations may vary according to the connected Bluetooth

AUTO ANSWER

or the volume knob or one of the number buttons

or .

sources.

during a call.

device.

] is set to a selected time. ( 13)

DISPLAY

]. ( 18)

Improve the voice quality

While talking on the phone...

1 Press the volume knob to enter [

FUNCTION

2 Turn the volume knob to make a selection

(see the following table), then press the knob.

3 Repeat step 2 until the desired item is

selected or activated.

4 Press and hold to exit.

To return to the previous setting item, press .

Default:

MIC GAIN –10

NR LEVEL –5

ECHO CANCEL –5

—

+10(–4

the microphone increases as the number increased.

—+5(0):Adjust the noise reduction level until the least noise is being heard during a phone conversation.

—+5(0):Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation.

):The sensitivity of

BLUETOOTH®

Make the settings for receiving a

call

Press to enter Bluetooth mode.

2 Turn the volume knob to make a

selection (see the following table), then press the knob.

3 Repeat step 2 until the desired item is

selected or activated.

4 Press and hold to exit.

To return to the previous setting item, press

Default:

SETTINGS

AUTO ANSWER

BATT/SIGNAL AUTO

—30:The unit answers incoming call automatically in the selected time (in seconds).;

:Shows the strength of the battery and signal when the unit detects a Bluetooth device and the Bluetooth device is connected.;

OFF

:Cancels. Clock time is shown.

OFF

:Cancels.

Make a call

You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature.

1 Press to enter Bluetooth mode. 2 Turn the volume knob to make a selection (see the following table), then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on

the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

CALL HISTORY

PHONE BOOK

Press the volume knob to select a name or a phone number.

• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of the display to indicate the previous call status.

• Press

• “NO DATA” appears if there is no recorded call history.

Press the volume knob to call.

Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains many contacts).

The first menu (ABCDEFGHIJK) appears.

• To go to the other menu (LMNOPQRSTUV or WXYZ1

• To select the desired first letter, turn the volume knob or press

Select “1” to search with numbers and select “

Turn the volume knob to select a name, then press the knob.

Turn the volume knob to select a phone number, then press the knob to call.

•

If the phone supports PBAP, the phonebook of the connected phone is automatically transferred to the unit

when pairing.

•

Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL

•

This unit can display only non-accent letters. (Accent letters such as “Ú” is showns as “U”.)

to change the display category (NUMBER or NAME).

), press

J / K

” to search with symbols.

S / T

, then press the knob.

ENGLISH

BLUETOOTH®

NUMBER DIAL

VOICE

BATT

SIGNAL

Functionality depends on the type of the phone used.

Turn the volume knob to select a number (0 to 9) or

character (

Press

Repeat steps

phone number.

Press the volume knob to call.

Speak the name of the contact you want to call or the voice command to control the phone functions. (

Make a call using voice recognition

LOW/ MID/ FULL

NO SIGNAL/ LOW/ MID/ MAX

the current received signal.

, #, +).

S / T

to move the entry position.

and 2 until you finish entering the

:Shows the strength of the battery.

)

:Shows the strength of

Make a call using voice recognition

Press and hold to activate the connected phone.

1 2 Speak the name of the contact you want to call or the

voice command to control the phone functions.

• Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details.

• This unit also supports the intelligent personal assistant function of iPhone.

Delete a contact

Press to enter Bluetooth mode.

1 2 Turn the volume knob to select [

CALL HISTORY

], then press the knob.

3 Turn the volume knob to select a contact. 4 Press and hold the volume knob to enter delete mode. 5 Turn the volume knob to select [

DELETE ONE DELETE ALL:

: Selected name or phone number in step 3 is deleted. All names or phone numbers in [

6 Turn the volume knob to select [

DELETE ONE

YES

] or [

DELETE ALL

CALL HISTORY

], then press the knob.

] in step 2 is deleted.

7 Press and hold to exit.

• To return to the previous setting item, press .

• Not applicable for mobile phone that supports PBAP.

Settings in memory

Store a contact in memory

You can store up to 6 contacts into the number buttons (1 to 6).

1 Press to enter Bluetooth mode. 2 Turn the volume knob to select [

then press the knob.

CALL HISTORY

], [

PHONE BOOK

], or [

NUMBER DIAL

3 Turn the volume knob to select a contact or enter a phone number.

If a contact is selected, press the volume knob to show the phone number.

4 Press and hold one of the number buttons (1 to 6).

“STORED” appears when the contact is stored. To erase a contact from the preset memory, select [

blank number.

NUMBER DIAL

] in step 2 and store a

Make a call from memory

Press to enter Bluetooth mode.

1 2 Press one of the number buttons (1 to 6). 3 Press the volume knob to call.

“NO MEMORY” appears if there is no contacts stored.

BLUETOOTH®

Other settings

Press the volume knob to enter

[FUNCTION

2 Turn the volume knob to make a selection (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated

on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

Default:

BT MODE

PHONE SELECT

AUDIO SELECT

DEVICE DELETE

PIN CODE EDIT (0000)

RECONNECT ON

AUTO PAIRING ON

INITIALIZE YES

Selects the phone or audio device to connect or disconnect. “

” appears in front of the device name when connected.

•

You can only connect another Bluetooth device by disconnecting the connected Bluetooth device

first. “*” disappears when disconnected.

Turn the volume knob to select a device to delete, then press the knob.

Turn the volume knob to select [

Changes the PIN code (up to 6 digits).

Turn the volume knob to select a number.

Press S/T to move the entry position.

Repeat steps

Press the volume knob to confirm.

:The unit automatically reconnect when the last connected Bluetooth device is within range.;

OFF

:Cancels.

:The unit automatically pair supported Bluetooth device (iPhone/ iPod touch/ Android device) when it is connected through USB input terminal.Depending on the operating system of the connected device, this function may not work. ;

:Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.).;

:Cancels.

and 2 until you finish entering the PIN code.

YES

] or [NO], then press the knob.

OFF

:Cancels.

Bluetooth test mode

You can check the connectivity of the supported profile between the Bluetooth device and the unit.

• Make sure there is no Bluetooth device paired.

1 Press and hold .

“PLEASE PAIR YOUR PHONE PIN 0000”

appears.

2 Search and select this unit model name

(KDC-BT3

3 Operate the Bluetooth device to confirm

pairing.

“TESTING” flashes on the display.

The connectivity result (OK or NG) appears after the test.

PAIRING: Pairing status HF CNT: Hands-Free Profile (HFP) compatibility AUD CNT: Advanced Audio Distribution Profile

PB DL: Phonebook Access profile (PBAP)

To cancel test mode, press and hold turn off the unit.

DAB) on the Bluetooth device.

(A2DP) compatibility

compatibility

ENGLISH

BLUETOOTH® AUX

BLUETOOTH — Audio

Audio player via Bluetooth

Press repeatedly to select BTAUDIO.

1 2 Operate the Bluetooth audio player to start playback.

To On the faceplate

Playback / pause

Select group or folder

Reverse / Forward skip

Reverse / Fast-forward

Repeat play Press

Random play Press repeatedly.

Operations and display indications may differ according to their availability on the connected device.

Press

Press J / K.

Press S/T.

Press and hold S/T.

ALL REPEAT, FILE REPEAT, REPEAT OFF

FOLDER RANDOM, RANDOM OFF

Press and hold to select

repeatedly.

ALL RANDOM

Preparation:

Select [

Start listening

Connect a portable audio player (commercially

available).

Auxiliary input jack

3.5mm stereo mini plug with “L” shaped connector (commercially available)

2 Press repeatedly to select AUX. 3 Turn on the portable audio player and start

playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter [ 2 Turn the volume knob to select [

the knob.

3 Turn the volume knob to select [

press the knob.

4 Turn the volume knob to make a selection, then

press the knob.

AUX

5 Press and hold to exit.

To return to the previous setting item, press .

] for [

(default)/

BUILT-IN AUX

]. ( 5)

FUNCTION SYSTEM

AUX NAME SET

DVD/ PORTABLE/ GAME/ VIDEO/ TV

Portable audio player

], then press

], then

AUDIO SETTINGS

While listening to any source...

1 Press the volume knob to enter [ 2 Turn the volume knob to select [

knob.

3 Turn the volume knob to make a selection (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

SUB-W LEVEL –15

BASS LEVEL –8

MID LEVEL –8

TRE LEVEL –8

EQ PRO

BASS ADJUST BASS CTR FRQ

MID ADJUST MID CTR FRQ 0.5K/ 1.0K/ 1.5K/ 2.5K

TRE ADJUST TRE CTR FRQ 10.0K/ 12.5K/ 15.0K/ 17.5K

+15 (0

to +8 (+6)

to +8 (+5)

to +8 (0)

BASS LEVEL –8

BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00

BASS EXTEND ON

MID LEVEL –8

MID Q FACTOR 0.75/ 1.00/ 1.25

TRE LEVEL –8

FUNCTION

AUDIO CONTROL

) Adjusts the subwoofer output level.

Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

60/ 80/ 100/ 200

Selects the center frequency.

to +8 (+6):Adjusts the level.

:Turns on the extended bass.;

1.5KHZ/ 2.5KHZ

to +8 (+5):Adjusts the level.

12.5KHZ/ 15.0KHZ/ 17.5KHZ

frequency.

to +8 (0):Adjusts the level.

], then press the

60HZ/ 80HZ/ 100HZ/ 200HZ

:Adjusts the quality factor.

0.5KHZ/ 1.0KHZ

:Selects the center frequency.

:Adjusts the quality factor.

:Selects the center

OFF

:Cancels.

10.0KHZ

Default:

PRESET EQ DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ

BASS BOOST LV1/ LV2/ LV3

LOUDNESS LV1/ LV2

SUBWOOFER SET ON

LPF SUBWOOFER THROUGH

SUB-W PHASE REVERSE

FADER R15

BALANCE L15

VOLUME OFFSET

SOUND RECNSTR

(Sound reconstruction)

• [

SUB-W LEVEL

selectable only if [

• [

SUB-W LEVEL

[

SUBWOOFER SET

NATURAL/ USER

genre. (Select [ [

DRIVE EQ

or running noise of the tyres.

preferred bass boost level.;

high frequencies boost to produce a well-balanced sound at a low volume level.;

:Turns on the subwoofer output.;

160HZ

160Hz are sent to the subwoofer.

subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [

THROUGH

For AUX: volume adjustment level of each source. (Before adjustment, select the source you want to adjust.)

:Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression.;

]/ [

SUBWOOFER SET

SWITCH PREOUT

]/ [

LPF SUBWOOFER

] is set to [ON].

:Selects a preset equalizer suitable to the music

USER

] to use the customized settings.)

] is a preset equalizer that reduces noise outside the car

LEVEL1/ LEVEL2/ LEVEL3

OFF

:Cancels.

LEVEL1/ LEVEL2

OFF

:All signals are sent to the subwoofer.;

:Audio signals with frequencies lower than 85Hz/ 120Hz/

(180°)/

] is selected for [

F15 (0

):Adjusts the rear and front speaker output balance.

R15 (0

):Adjusts the left and right speaker output balance.

–8

to +8(0) ; For other sources: –8 to 0:Presets the

]/ [

LPF SUBWOOFER

] is set to [

]/ [

SUB-W PHASE

:Selects your preferred low and

:Cancels.

NORMAL

(0°):Selects the phase of the

LPF SUBWOOFER

OFF

SUB-W

] is selectable only if

OFF

:Cancels.

]/ [

SUB-W PHASE

] or [

:Selects your

:Cancels.

85HZ/ 120HZ

].)

SUBWOOFER

ENGLISH

] is

]. ( 4)

DISPLAY SETTINGS

1 Press the volume knob to enter [ 2 Turn the volume knob to select [

knob.

3 Turn the volume knob to make a selection (see the following

table), then press the knob.

4 Repeat step 3 until the desired item is selected or activated

or follow the instructions stated on the selected item.

5 Press and hold to exit.

To return to the previous setting item, press .

COLOR SELECT*

DIMMER ON

BRIGHTNESS 0

TEXT SCROLL AUTO/ ONCE

For .

Preset colors:

BLUE1 AQUA2 YELLOW

VARIABLE SCAN/ CUSTOM R/G/B

preferred button and display illumination color.

You can create your own color (when [ preset colors* stored in [

2 3

OFF

— 31: Selects your preferred brightness level for display

illumination (and button illumination*

automatically, or scroll only once.;

RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/

BLUE2/ BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/

GREEN1/ GREEN2/ GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/

ORANGE1/ ORANGE2/ ORANGERED

CUSTOM R/G/B

Press and hold the volume knob to enter the detailed color

adjustment. Press S/T to select the color (R/ G/ B) to adjust. Turn the volume knob to adjust the level (0 — 9), then

press the knob.

:Dims the display illumination (and button illumination*1).;

:Cancels.

:Selects whether to scroll the display information

FUNCTION

DISPLAY

], then press the

Default:

/ preset colors*2: Selects your

is selected). The color you have created can be

CUSTOM R/G/B

OFF

:Cancels.

] or

MORE INFORMATION

General

•

This unit can only play the following CDs:

•

Detailed information and notes about the playable audio files are stated in an online manual on the

following web site: www.kenwood.com/cs/ce/audiofile/

Playable files

•

Playable audio file:

•

Playable disc media: CD-R/CD-RW/CD-ROM

•

Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name

•

Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device.

Unplayable discs

•

Discs that are not round.

•

Discs with coloring on the recording surface or discs that are dirty.

•

Recordable/ReWritable discs that have not been finalized.

•

8cm CD. Attempting to insert using an adapter may cause malfunction.

About USB devices

•

This unit can play the following files stored on a USB mass storage class device.

•

You cannot connect a USB device via a USB hub.

•

Connecting a cable whose total length is longer than 5m may result in abnormal playback.

•

This unit cannot recognize a USB device whose rating is other than 5V and exceeds 1A.

About KENWOOD Music Editor Light and KENWOOD Music Control

•

This unit supports the PC application KENWOOD Music Editor Light and Android™ application

KENWOOD Music Control.

•

When you play audio files with song data added using the KENWOOD Music Editor Light or KENWOOD

Music Control, you can search for audio files by Genres, Artists, Albums, Playlists, and Songs.

•

KENWOOD Music Editor Light and KENWOOD Music Control are available on the following web site:

www.kenwood.com/cs/ce/

: MP3 (.mp3), WMA (.wma), AAC (.m4a)

: MP3 (.mp3), WMA (.wma)

: MP3/ WMA/ AAC/ WAV

: MP3/ WMA/ WAV

MORE INFORMATION

About iPod/iPhone

Made for

iPod touch (2nd, 3rd, 4th, and 5th generation)

iPod classic

iPod nano (3rd, 4th, 5th, 6th, and 7th generation)

iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C

•

For the latest compatible list and software versions of iPhone/iPod, see:

www.kenwood.com/cs/ce/ipod

•

You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod.

About Android device

•

This unit supports Android OS 4.1 and above.

•

Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory

(AOA) 2.0.

•

If the Android device supports both mass storage class device and AOA 2.0, this unit always

playback via AOA 2.0 as priority.

•

For more information and the latest compatible list, see: www.kenwood.com/cs/ce/

About Bluetooth

•

Depending on the Bluetooth version of the device, some Bluetooth devices may not be able

to connect to this unit.

•

This unit may not work with some Bluetooth devices.

•

Signal conditions vary, depending on the surroundings.

•

For more information about Bluetooth, visit the following website:

www.kenwood.com/cs/ce/

(For )

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory. (

When a call comes in, “CALL” appears. (The audio system pauses.)

• To continue listening to the audio system during a call, press

“CALL” disappears and the audio system resumes.

When the call ends, “CALL” disappears. (The audio system resumes.)

24)

TROUBLESHOOTING

Symptom Remedy

Sound cannot be heard.

“MISWIRING CHECK WIRING THEN PWR ON” appears.

“PROTECTING SEND SERVICE” appears.

General

•

Sound cannot be heard.

•

The unit does not turn on.

•

Information shown on the

display is incorrect.

The unit does not work at all. Reset the unit. (

DAB reception is poor. Make sure [ON] is selected for [

“DAB ANT ERR” Check the DAB antenna. If a passive antenna

Digital Radio

“RELATED SERV FOUND”

•

Radio reception is poor.

•

Static noise while listening

Radio

Analog

to the radio.

Disc cannot be ejected.

Noise is generated. Skip to another track or change the disc.

CD / USB / iPod

Tracks do not play back as you intended them to play.

•

Adjust the volume to the optimum level.

•

Check the cords and connections.

Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.

Send the unit to the nearest service center.

Clean the connectors. (

(

5)

(without a booster) is used, set [ to [

OFF

]. ( 5)

•

Press the volume knob to activate Soft-Link. ( 7)

•

Press to cancel.

•

Connect the antenna firmly.

•

Pull the antenna out all the way.

Press and hold not to drop the disc when it is ejected. If this does not solve the problem, reset the unit. (

Playback order is determined when files are recorded.

2)

3)

DAB ANT POWER

to forcibly eject the disc. Be careful

3)

]

ENGLISH

TROUBLESHOOTING

Symptom Remedy

“READING” keeps flashing.

Elapsed playing time is not correct.

Correct characters are not displayed (e.g. album name).

“NA FILE” Make sure the disc contains supported audio files. (

“NO DISC” Insert a playable disc into the loading slot.

“TOC ERROR” Make sure the disc is clean and inserted properly.

“PLEASE EJECT” Reset the unit. If this does not solve the problem, consult

CD / USB / iPod

“READ ERROR” Copy the files and folders onto the USB device again. If this

“NO DEVICE” Connect a USB device, and change the source to USB again.

“COPY PRO” A copy-protected file is played.

“NA DEVICE” Connect a supported USB device, and check the connections.

“NO MUSIC” Connect a USB device that contains playable audio files.

“iPod ERROR”

•

Sound cannot be heard

during playback.

•

Sound output only

from the Android device.

ANDROID

Do not use too many hierarchical levels or folders.

Elapsed playing time is not correct.

This unit can only display uppercase letters, numbers, and a limited number of symbols. Uppercase Cyrillic letters can also be displayed if [

your nearest service center.

does not solve the problem, reset the USB device or use another USB device.

•

Reconnect the iPod.

•

Reset the iPod.

•

Reconnect the Android device.

•

If in [

on the Android device and start playback.

•

If in [

application or use another media player application.

•

Restart the Android device.

•

If this does not solve the problem, the connected Android

device is unable to route the audio signal to unit. (

РУССКИЙ

HAND MODE

] is selected. ( 5)

], launch any media player application

], relaunch the current media player

18)

Symptom Remedy

Cannot playback at [

BROWSE MODE

“NO DEVICE” or “READING” keeps flashing.

ANDROID

Playback is intermittent or sound skips.

“ANDROID ERROR” / “NADEVICE”

No Bluetooth device is detected.

Bluetooth pairing cannot be made.

Echo or noise is heard

Bluetooth®

during a phone conversation.

Phone sound quality is poor.

19)

•

Make sure KENWOOD MUSIC PLAY APP is installed

on the Android device. (

•

Reconnect the Android device and make the

appropriate setting in [

•

If this does not solve the problem, the connected

Android device does not support [ (

19)

•

Switch off the developer options on the Android

device.

•

Reconnect the Android device.

•

If this does not solve the problem, the connected

Android device does not support [ (

19)

Turn off the power saving mode on the Android device.

•

Reconnect the Android device.

•

Restart the Android device.

•

Search from the Bluetooth device again.

•

Reset the unit. ( 3)

•

Make sure you have entered the same PIN code to

both the unit and Bluetooth device.

•

Delete pairing information from both the unit and

the Bluetooth device, then perform pairing again. (

11)

•

Adjust the microphone unit’s position. ( 11)

•

Check the [

ECHO CANCEL

•

Reduce the distance between the unit and the

Bluetooth device.

•

Move the car to a place where you can get a better

signal reception.

10)

ANDROID SETUP

BROWSE MODE

] setting. ( 12)

]. ( 10)

TROUBLESHOOTING

SPECIFICATIONS

Symptom Remedy

Voice calling method is not successful.

Sound is being interrupted or skipped during playback of a Bluetooth audio player.

The connected Bluetooth audio player cannot be controlled.

“DEVICE FULL” The number of registered devices has reached its limit. Retry

Bluetooth®

“N/A VOICE TAG” Make sure the same voice as the registered voice tag is used. “NOT SUPPORT” The connected phone does not support Voice Recognition

“NO ENTRY” / “NO PAIR”

“ERROR” Try the operation again. If “ERROR” appears again, check if the

“NO INFO” Bluetooth device cannot get the contact information. “HF ERROR XX” /

“BT ERROR”

•

Use voice calling method in a more quiet environment.

•

Reduce the distance from the microphone when you speak

the name.

•

Make sure the same voice as the registered voice tag is

used.

•

Reduce the distance between the unit and the Bluetooth

audio player.

•

Turn off, then turn on the unit and try to connect again.

•

Other Bluetooth devices might be trying to connect to the

unit.

•

Check whether the connected Bluetooth audio player

supports Audio/Video Remote Control Profile (AVRCP). (Refer to the instructions of your audio player.)

•

Disconnect and connect the Bluetooth player again.

after deleting an unnecessary device. (

feature. There is no registered device connected/found via Bluetooth.

device supports the function you have tried.

Reset the unit and try the operation again. If this does not solve the problem, consult your nearest service center.

15,

DEVICE DELETE

DAB Frequency Range L Band 1452.960MHz — 1490.624MHz

Band III 174.928MHz — 239.200MHz

Sensitivity –100dBm

Signal-to-Noise Ratio 80dB

Antenna Connector Type SMB

Digital radio

Antenna Output Voltage 14.4V (11V – 16V)

Antenna Maximum Current <100mA

FM Frequency Range 87.5MHz — 108.0MHz (50kHz space)

Usable Sensitivity (S/N=26dB) 0.71μV/75Ω

Quieting Sensitivity (DINS/N=46dB)

Frequency Response (±3dB) 30Hz — 15kHz

)

Signal-to-Noise Ratio (MONO) 64dB

Stereo Separation (1kHz) 40dB

Analog radio

MW Frequency Range 531kHz — 1611kHz (9kHz space)

Usable Sensitivity (S/N=20dB) 28.2μV

LW Frequency Range 153kHz — 279kHz (9kHz space)

Usable Sensitivity (S/N=20dB) 50μV

2.0μV/75Ω

ENGLISH

SPECIFICATIONS

Laser Diode GaAIAs

Digital Filter (D/A) 8 times over sampling

Spindle Speed 500rpm — 200rpm (CLV)

Wow & Flutter Below measurable limit

Frequency Response (±1dB) 20Hz — 20kHz

Total Harmonic Distortion (1kHz) 0.01%

Signal-to-Noise Ratio (1kHz) 105 dB

CD player

Dynamic Range 90dB

Channel Separation 85dB

MP3 Decode Compliant with MPEG-1/2 Audio Layer-3

WMA Decode Compliant with Windows Media Audio

AAC Decode

USB Standard USB1.1, USB2.0 (Full speed)

File System FAT12/16/32

Maximum Supply Current DC5V

MP3 Decode Compliant with MPEG-1/2 Audio Layer-3

USB

WMA Decode Compliant with Windows Media Audio

AAC Decode

WAV Decode Linear-PCM



Frequency Response (±3dB) 20Hz—20kHz

Input Maximum Voltage 1000mV

Auxiliary

Input Impedance 30kΩ

(

For )

AAC-LC “.m4a” files

1A

(

For )

AAC-LC “.m4a” files

Version Bluetooth Ver.2.1+EDR / Bluetooth 3.0

)

Frequency Range 2.402GHz — 2.480GHz

Output Power +4dBm (MAX), 0dBm (AVE) Power Class 2

Maximum Communication Range Line of sight approx. 10m (32.8ft)

Profile HFP (Hands-Free Profile)

Bluetooth

(For

Maximum Output Power 50W×4

Full Bandwidth Power 22W×4 (at less than 1% THD)

Speaker Impedance 4Ω—8Ω

Tone Action Bass 200Hz±8dB

Audio

Preout Level/Load (CD) 2500mV/10kΩ

Preout Impedance ≤600Ω

Operating Voltage 14.4V (10.5V—16V allowable)



Maximum Current Consumption 10A

Operational Temperature Range 0°C—+40°C

General

Installation Size (W×H×D) 182mm×53mm×159mm

Weight 1.3kg

Subject to change without notice.

SPP (Serial Port Profile) PBAP (Phonebook Access Profile) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile)

Middle 2.5kHz±8dB

Treble 12.5kHz±8dB

INSTALLATION / CONNECTION

Warning

•

The unit can only be used with a 12V DC power supply, negative ground.

•

Disconnect the battery’s negative terminal before wiring and mounting.

•

Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire

(black) to prevent a short circuit.

•

Insulate unconnected wires with vinyl tape to prevent a short circuit.

•

Be sure to ground this unit to the car’s chassis again after installation.

Caution

•

For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.

•

Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during

and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.

•

Do not connect the [ wires of speakers to the car chassis or Ground wire (black), or connect

them in parallel.

•

Mount the unit at an angle of less than 30º.

•

If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red)

to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key.

•

Keep all cables away from heat dissipate metal parts.

•

After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are

working properly.

•

If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old

fuse with one that has the same rating.

Installing the unit (in-dash mounting)

Hook on the top side

Orientate the trim plate as illustrated before fitting.

Do the required wiring. (

24)

Dashboard of your car

Bend the appropriate tabs to hold the mounting sleeve firmly in place.

Basic procedure 1

Remove the key from the ignition switch, then disconnect the [ terminal of the car battery.

2 (For )

Install the DAB antenna.

See Installing the DAB antenna. (



25)

3 Connect the wires properly.

See Wiring connection. (

24)

4 Install the unit to your car.

See Installing the unit (in-dash mounting).

5 Connect the [ terminal of the car battery. 6 Reset the unit. ( 

)

How to remove the unit 1

Detach the faceplate.

2 Fit the catch pin on the

extraction keys into the holes on both sides of the trim plate, then pull it out.

3 Insert the extraction keys

deeply into the slots on each side, then follow the arrows as shown on the right.

ENGLISH

INSTALLATION / CONNECTION

Wiring connection

Antenna terminal

DAB antenna jack ( 25)

Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles

You may need to modify the wiring of the supplied wiring harness as illustrated below.

A7 (Red)

Vehicle

A4 (Yellow)

Default wiring

Color and function A4 Yellow : Battery A5 Blue/White : Power control A7 Red : Ignition (ACC) A8 Black : Earth (ground) connection

Purple B2 B3 B4 B5 B6 B7 B8

]

Purple/black

Gray

]

Gray/black

]

White

White/black

]

Green

Green/black

[

: Rear speaker (right)

: Front speaker (right)

: Front speaker (left)

: Rear speaker (left)

Ignition wire (Red)

Battery wire (Yellow)

Rear/subwoofer output

Yellow (Battery wire)

Red (Ignition wire)

Unit

Red (A7)

Yellow (A4)

Fuse (10A)

If no connections are made, do not let the

Light blue/yellow (Steering remote

control wire)

Blue/White (Power control

wire/ Antenna control wire)

Brown (Mute control

wire)

ISO connectors

(For )

MIC (microphone input terminal) (

11)

wire come out from the tab.

STEERING WHEEL

REMOTE INPUT

REMOTE CONT

To the steering wheel remote control adapter

To the power control terminal

ANT CONT

P. CONT

when using the optional power amplifier or to the antenna control terminal in the vehicle

(For )

To connect the Kenwood navigation system, refer your navigations manual

(For )

MUTE

To the terminal that is grounded when the telephone rings or during conversation ( (To connect the Kenwood navigation system, refer your navigations manual.)

19)

When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.

Part list for installation

(A)

Faceplate

(B)

Trim plate

(C)

Mounting sleeve

(D)

Wiring harness

(E)

Extraction key

INSTALLATION / CONNECTION

Installing the DAB antenna

Caution

•

The film antenna

•

Do not install at the following locations:

– where it may block the driver’s view. – where it may obstruct the operation of safety devices such as air

bags. – on movable glass surfaces such as the rear hatch. – at side of vehicle (e.g. door, front quarter window). – on rear window.

•

Signal strength will weaken when installed at the following

locations: – on IR reflecting glass or locations covered with mirror type glass

film. – where it overlaps with genuine radio antenna (pattern). – where it overlaps with window heating wires. – on glass that blocks radio signals (e.g. IR reflecting glass, thermal

insulation glass).

•

Poor reception may occur:

– due to noise when windscreen wiper, air conditioner, or motor is

turned on. – depending on the direction of the broadcast station with respect

to the vehicle (antenna).

•

Thoroughly wipe oil and dirt from the pasting surface with the

supplied cleaner

•

Do not bend or damage the film antenna

•

It may not be possible to install on certain vehicles.

•

Check the cable routing of the film antenna

(G)

before pasting.

•

Do not apply any glass cleaner after pasting the film antenna

: Connect CX-DAB1 (optional accessory).

: Connect the supplied DAB antenna.

(F)

is exclusively for use inside the vehicle.

(I)

(F)

and amplifier unit

(F)

Determine the antenna installation position

•

The direction of the film antenna

right side or left side.

•

Be sure to check the installation location of film antenna

•

Separate from other antennas by at least 100mm.

•

Do not paste the amplifier unit

enough adhesion.

Installing the antenna on the left side

(F)

changes depending on whether the film antenna

(G)

on the ceramic line (black part) around the front glass. Because there is not

150 mm

30 mm

Paste the earth sheet of the amplifier unit

(F)

(G)

Earth sheet*

Part list for installation

(F)

Film antenna

(F)

before installing. Film antenna cannot be re-pasted.

Ceramic line (black part)

(G)

on the metal part of the front pillar.

(G)

Amplifier unit

(cable with booster, 3.5m)

(F)

is installed on the

Installing the antenna on the right side

150 mm

(G)

Earth sheet*

30 mm

(F)

(H)

Cable clamper

(I)

Cleaner

ENGLISH

INSTALLATION / CONNECTION

Caution

When installing the antenna cable inside the front pillar with the air bag installed

•

The front pillar cover is secured with a special clip which

may need to be replaced when it is removed. Contact your vehicle dealer for details on removing the front pillar cover and availability of replacement parts.

Clip

Front pillar

•

Install the amplifier unit

does not obstruct the operation of the air bag.

(G)

above the air bag so that it

(G)

Installation overview

The antenna should be installed on the passenger side for safety.

Antenna installation 1

Remove the front pillar cover of your car.

Front pillar

2 Clean the windscreen with the supplied

cleaner (I).

(I)

– Wait until the glass surface is completely

dry before proceeding.

– Warm the surface of the windscreen with

defroster if it is cold (during winter).

3 Remove the separator (tag 1) of film

antenna (F) horizontally and paste the antenna on the windscreen.

Separator (tag 1)

Air bag

Do not touch the pasting surface (adhesive

side) of the film antenna (F).

(F)

+ 106 hidden pages