Kenwood KDC-300UV User Manual [ru]

KDC-300UV

CD-RECEIVER

INSTRUCTION MANUAL

CD-RECEIVER

BEDIENUNGSANLEITUNG

CD-PECИBEP

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

CD-РЕСІВЕР

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.

The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Notice:

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien (anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss. Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen Entsorgungsbetrieben. Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei

enthalt.

For Israel

Declaration of Conformity with regard to the EMC Directive Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU Representative:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Konformitätserklärung in Bezug auf die EMC-Vorschrift Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU Hersteller:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU-Vertreter:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Декларация соответствия относительно Директивы Электромагнитная совместимость Декларация соответствия относительно Директивы 2011/65/EU об ограничении содержания вредных веществ Производитель:

ДжейВиСи КЕНВУД Корпорейшн 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Япония

Представительство в EC:

ДжейВиСиКЕНВУД Нидерланд Би.Ви. Amsterdamseweg 37, 1422 AC UITHOORN, Нидерланды

Декларація про відповідність вимогам Директиви EMC Декларація про відповідність вимогам Директиви RoHS 2011/65/EU Виробник:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Представник у ЕС:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Kennzeichnung von Geräten mit Laser-Abtastern

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts besteht.

Маркировка изделий, использующих лазеры

К корпусу устройства прикреплена табличка, указывающая, что устройство использует лазерные лучи класса 1. Это означает, что в устройстве используются лазерные лучи слабой интенсивности. Они не представляют опасности и не распространяют опасную радиацию вне устройства.

Маркування виробів, обладнаних лазером

На каркас/корпус поміщається наклейка, в якій зазначається, що даний виріб випромінюєє лазерні промені Класу 1. Це означає, що даний апарат використовує лазерні промені слабшого класу. За межами даного апарату не існує небезпеки лазерного випромінювання.

For Turkey

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir.

Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (atık yan ürün toplama sistemlerini kullanan ülkeleri için uygulanabilir)

Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak atılamaz. Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da yardımcı olacaktır.

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы (годности) данного товара “по истечении которого он может представлять опасность для жизни, здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7) лет со дня производства. Этот срок является временем, в течение которого потребитель данного товара может безопасно им пользоваться при условии соблюдения инструкции по эксплуатации данного товара, проводя необходимое обслуживание, включающее замену расходных материалов и/или соответствующее ремонтное обеспечение в специализированном сервисном центре.

Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных косметических материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в частности, гарантийного свидетельства KENWOOD, которое он может получить в соответствии с законом о правах потребителя или других законов, связанных с ним.

Декларація про Відповідність Вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (затвердженого Постановою №1057 Кабінету Міністрів України)

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (ТР ОВНР).

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР:

свинець(Pb) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

кадмій (Cd)– не перевищує 0.01 % ваги речовини або в концентрації до 100 частин на мільйон;

ртуть(Hg) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

шестивалентний хром (Cr 6+) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

полібромбіфеноли (PBB) – не перевищує 0.1% ваги речовини або в концентрації до 1000 частин на мільйон;

полібромдефенілові ефіри (PBDE) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон.

CONTENTS BEFORE USE

BEFORE USE 2

BASICS 3

GETTING STARTED 3

1 Select the display language

and cancel the demonstration 2 Set the clock and date 3 Set the initial settings

RADIO 5

CD / USB / iPod / ANDROID 7

AUX 9

AUDIO SETTINGS 9

DISPLAY SETTINGS 12

TROUBLESHOOTING 13

REFERENCES 14

Maintenance More information

INSTALLATION / CONNECTION 16

SPECIFICATIONS 18

IMPORTANT

• To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual.

• Please keep the manual in a safe and accessible place for future reference.

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

•

Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.

• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

• USB rating is indicated on the main unit. To view, detach the faceplate.

• Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected ( a low ceiling area.

How to read this manual

• Operations are explained mainly using buttons on the faceplate.

• English indications are used for the purpose of explanation. You can select the display language from the [

FUNCTION

• [

• (

] menu. ( 5)

] indicates the selected items.

XX) indicates references are available on the stated page.

( 3)

17). Turn off the unit or change the source to STANDBY when parking at

BASICS

Faceplate

GETTING STARTED

Loading slot

Detach button

To On the faceplate

Turn on the power

Adjust the volume Turn the volume knob. Select a source

Change the display information Press DISP repeatedly. (

Flashes when the unit enters searching status.

Press

• Press and hold to turn off the power.

Press

Display windowVolume knob

How to resetAttach Detach

repeatedly.

Press the switch twice within 5seconds after detaching the faceplate.

15)

Select the display language and cancel the demonstration

When you turn on the power for the first time (or [

RESET

] is set to [

“PRESS” “VOLUME KNOB”

1 Turn the volume knob to select [

[

RUS

[

ENG

Then, the display shows: “CANCEL DEMO”

“VOLUME KNOB”.

YES

], 4), the display shows: “SEL LANGUAGE”

](Russian) or [

] is selected for the initial setup.

SPA

] (Spanish), then press the knob.

ENG

FACTORY

] (English),

“PRESS”

2 Press the volume knob.

[

YES

] is selected for the initial setup.

3 Press the volume knob again.

“DEMO OFF” appears.

Then, the display shows the selected crossover type: “2-WAY X ’ OVER” or “3-WAY X ’ OVER”

• To change the crossover type, see “Change the crossover type” (

5).

ENGLISH

GETTING STARTED

Set the clock and date

Press the volume knob to enter [

1 2 Turn the volume knob to select [

To adjust the clock

3 Turn the volume knob to select [

knob.

4 Turn the volume knob to make the settings, then press the knob.

Hour

Minute

5 Turn the volume knob to select [

knob.

6 Turn the volume knob to select [

knob.

To set the date

7 Turn the volume knob to select [

knob.

8 Turn the volume knob to select [

press the knob.

9 Turn the volume knob to select [ 10 Turn the volume knob to make the settings, then press the knob.

Day

Month Year or Month Day Year

11 Press and hold to exit.

To return to the previous setting item, press .

Set the initial settings

Press repeatedly to enter STANDBY.

1 2 Press the volume knob to enter [ 3 Turn the volume knob to select an item (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

FUNCTION

CLOCK

], then press the knob.

CLOCK ADJUST

CLOCK FORMAT

12H

DATE FORMAT

DD/MM/YY

DATE SET

FUNCTION

], then press the

] or [

24H

], then press the

] or [

MM/DD/YY

], then press the knob.

], then

DISPLAY

EASY MENU

TUNER SETTING

PRESET TYPE

SYSTEM

KEY BEEP*

SOURCE SELECT

BUILT-IN AUX

P-OFF WAIT

CD READ 1

F/W UPDATE

UPDATE SYSTEM

F/W UP xx.xx

FACTORY RESET YES

Not applicable if 3-way crossover is selected.

:Both display and button illumination change to white color when

entering [

FUNCTION

as [

COLORSELECT

NORMAL

:Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW).; button, regardless of the selected band.

:Activates the keypress tone.;

:Enables AUX in source selection.;

Applicable only when the demonstration mode is turned off. Sets the duration when the unit will automatically turn off (while in standby mode) to save the battery.

20M

: 20minutes;

:Automatically distinguishes between audio file disc and music CD.;

:Forces to play as a music CD. No sound can be heard if an audio file disc

is played.

YES

:Starts upgrading the firmware.; NO:Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/

:Resets the settings to default (except the stored station).;

:Cancels.

].;

OFF

:Both display and button illumination remain

] color. ( 12)

MIX

:Memorizes one station for each preset

OFF

:Deactivates.

OFF

:Disables. ( 9)

40M

: 40minutes;

60M

: 60minutes;

– – –

Default:

:Cancels

GETTING STARTED RADIO

CLOCK

CLOCK DISPLAY

ENGLISH

РУССКИЙ

ESPANOL

Change the crossover type

Press repeatedly to enter STANDBY.

1 2 Press and hold number buttons 4 and 5 to enter crossover select.

The current crossover type appears.

3 Turn the volume knob to select “2WAY” or “3WAY”, then press the

knob.

4 Turn the volume knob to select “YES” or “NO”, then press the knob.

The selected crossover type appears.

• To cancel, press and hold .

• To adjust the selected crossover settings, (

Caution

Select a crossover type according to how the speakers are connected. ( 17) If you select a wrong type:

• The speakers may damage.

• The output sound level may be extremely high or low.

:The clock time is shown on the display even when the unit is turned

off.;

OFF

:Cancels.

Select the display language for [ if applicable. By default, [

ENGLISH

] is selected.

FUNCTION

] menu and music information

10).

Search for a station

Press repeatedly to select TUNER.

1 2 Press repeatedly to select FM1/ FM2/ FM3/ MW/ LW. 3 Press S/T to search for a station.

• To change the searching method for S/T: Press

repeatedly.

AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number buttons

(1to6).

• To select a stored station: Press one of the number buttons (1to6).

Other settings

Press the volume knob to enter [

1 2 Turn the volume knob to select an item ( 

knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

FUNCTION

), then press the

ENGLISH

RADIO

TUNER SETTING

LOCAL SEEK

AUTO MEMORY

MONO SET ON

NEWS SET ON

REGIONAL ON

AF SET ON

TI ON

PTY SEARCH1 Press the volume knob to enter PTY language selection.

CLOCK

TIME SYNC

: Searches only stations with good reception. ;

•

Settings made are applicable only to the selected source/station. Once you change

the source/station, you need to make the settings again.

YES

:Automatically starts memorizing 6 stations with good reception.; NO:Cancels.

•

Selectable only if [

:Improves the FM reception, but the stereo effect may be lost.;

: The unit will temporarily switch to News Programme if available. ;

: Switches to another station only in the specific region using the “AF” control.;

OFF

:Cancels.

: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor.;

:Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up).;

Turn the volume knob to select the PTY language (

GERMAN

Turn the volume knob to select the available Program Type (see the following).

Press

:Synchronizes the unit’s time to the Radio Data System station time.;

OFF

:Cancels.

NORMAL

OFF

:Cancels.

), then press the knob.

S / T

to start searching.

:Cancels.

] is selected for [

PRESET TYPE

OFF

: Cancels.

]. ( 4)

ENGLISH/ FRENCH

OFF

Default:

:Cancels.

OFF

: Cancels.

Available Program Type for PTY SEARCH

SPEECH : NEWS, AFFAIRS, INFO

CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT

MUSIC

POP M

(music),

CLASSICS, OTHER M

NATION M

The unit will search for the Program Type categorized under [

SPEECH

] or [

MUSIC

• [

LOCAL SEEK

[

PTY SEARCH

• If the volume is adjusted during reception of traffic information or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information or news bulletin is turned on.

Alphabet search

If you have many files in the iPod, you can search through them quickly according to the first character of the file name.

]/ [

MONO SET

] is selectable only when the band is FM1/ FM2/ FM3.

ROCK M

(music),

OLDIES, FOLK M

] if selected.

]/ [

NEWS SET

(information),

(music),

EASY M

(music),

]/ [

REGIONAL

SPORT, EDUCATE, DRAMA

(music),

JAZZ, COUNTRY

(music)

]/ [

AF SET

Turn the volume knob quickly to enter character search. Turn the volume knob to select the character.

To search for a character other than A to Z and 0to9, enter only “

”.

Press S/T to move to the entry position.

• You can enter up to 3characters.

Press the volume knob to start searching.

LIGHT M

]/ [TI]/

CD / USB / iPod / ANDROID

Start playback

The source changes automatically and playback starts.

Eject disc

Label side

To directly select USB/ IPOD/ ANDROID source, press iPod USB.

USB input terminal

USB

CA-U1EX (max.: 500mA) (optional accessory)

iPod/iPhone

KCA-iP102 / KCA-iP103 (optional accessory) or accessory cable of the iPod/iPhone

ANDROID

Micro USB 2.0 cable

(commercially available)

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

To On the faceplate

Playback / pause Press .

Reverse / Fast-forward

Select a track/file

Select a folder

Repeat play

Random play

Press and hold S/T.

Press S/T.

Press J/K. Press repeatedly.

TRACK REPEAT/ ALL REPEAT FILE REPEAT/ FOLDER REPEAT/ ALL REPEAT FILE REPEAT/ FOLDER REPEAT/ REPEAT OFF

Press repeatedly.

DISC RANDOM/ RANDOM OFF FOLDER RANDOM/ RANDOM OFF

: Audio CD

: MP3/WMA/AAC/WAV/FLAC file

: iPod or ANDROID

: Audio CD

: MP3/WMA/AAC/WAV/FLAC file, iPod or

ANDROID

Press and hold

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions

to select

ALL RANDOM

to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. (

For ANDROID: Applicable only when [

For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ ANDROID.

For iPod/ ANDROID: Applicable only when [

For CD: Only for MP3/WMA/AAC files.

14)

BROWSE MODE

MODE OFF

] is selected. ( 8)

]/ [

BROWSE MODE

] is selected. ( 8)

ENGLISH

CD / USB / iPod / ANDROID

Select control mode

While in IPOD source, press iPod USB repeatedly.

MODE ON

: Control iPod using the iPod itself

MODE OFF

skip, fast-forward or reverse from this unit.

: Control iPod from this unit.

. However,

you can still play/pause, file

• To return to the root folder/ first file/ top menu, press 5.

• To return to the previous setting item, press

• To cancel, press and hold

• For iPod, applicable only when [

• For ANDROID, applicable only when [ selected.

MODE OFF

] is selected.

BROWSE MODE

] is

While in ANDROID source, press iPod USB repeatedly.

BROWSE MODE

HAND MODE

: Control Android device from this unit via KENWOOD MUSIC PLAY

application installed in the Android device.

: Control Android device using the Android device itself via other

media player applications installed in the Android device. However, you can still play/pause and file skip from this unit.

Select music drive

Press iPod USB repeatedly.

Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass Storage Class).

• Selected drive of a multiple drives device.

Select a file from a folder/list

Press .

1 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

Turn the volume knob quickly to browse through the list quickly.

–

Not applicable for iPod.

(or)

Press S/T to search at a preset skip search ratio. (

• Pressing and holding S/T searches at a 10

– Not applicable for audio CD and MP3/ WMA/ AAC/ WAV/ FLAC files.

(or)

Alphabet search

(applicable only for iPod)

( 6)

ratio.

[

SKIP SEARCH

Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Other settings

Press the volume knob to enter [

FUNCTION

2 Turn the volume knob to select an item (see the

following table), then press the knob.

3 Repeat step 2 until the desired item is selected or

activated.

4 Press and hold to exit.

To return to the previous setting item, press .

Default:

USB

MUSIC DRIVE DRIVE CHANGE

SKIP SEARCH 0.5%/ 1%/ 5%/ 10%

])

is selected automatically and playback starts. Repeat steps

ANDROID, selects the skip search ratio over the total files.

:The next drive ([

to 3 to select the following drives.

DRIVE 1

: While listening to iPod or

] to [

DRIVE 4

])

AUX

Preparation:

Select [

] for [

BUILT-IN AUX

Start listening

Connect a portable audio player (commercially available).

Auxiliary input jack

3.5mm stereo mini plug with “L” shaped connector (commercially available)

2 Press repeatedly to select AUX. 3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter [ 2 Turn the volume knob to select [

knob.

3 Turn the volume knob to select [

knob.

4 Turn the volume knob to select an item, then press the

knob.

AUX

(default)/

5 Press and hold to exit.

To return to the previous setting item, press .

]. ( 4)

Portable audio player

FUNCTION SYSTEM

], then press the

AUX NAME SET

DVD/ PORTABLE/ GAME/ VIDEO/ TV

], then press the

AUDIO SETTINGS

While listening to any source...

1 Press the volume knob to enter [ 2 Turn the volume knob to select [ 3 Turn the volume knob to select an item (see the following table), then

press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

SUB-W LEVEL –50

MANUAL EQ

BAND1 LEVEL LEVEL

BAND2 LEVEL BAND13 LEVEL

Q FACTOR 1.35/ 1.50/ 2.00

PRESET EQ NATURAL/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL/ USER

BASS BOOST LEVEL1/ LEVEL2/ LEVEL3/ LEVEL4/ LEVEL5

LOUDNESS LEVEL1/ LEVEL2

SUBWOOFER SET ON

+10 (0

BASS EXTEND ON

–9

to +9 (0): The sound elements (frequency level, tone level, Q factor) are preset into each selection ( Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

preset equalizer suitable to the music genre. (Select [ made in [

MANUAL EQ

level.;

OFF

:Cancels.

produce a well-balanced sound at a low volume level.;

:Turns on the subwoofer output.;

FUNCTION

AUDIO CONTROL

): Adjusts the subwoofer output level.

–9

to +9 (0):(Refer to

:Turns on the extended bass.;

BAND1 LEVEL

:Adjust the quality factor.

].)

:Selects your preferred low and high frequencies boost to

], then press the knob.

OFF

:Cancels.

BAND2 LEVEL

BAND13 LEVEL

below.)

OFF

:Cancels.

USER

] to use the settings

:Selects your preferred bass boost

OFF

:Cancels.

Default:

: Selects a

ENGLISH

AUDIO SETTINGS

FADER

BALANCE L15

VOLUME OFFSET –15

SOUND EFFECT

SOUND RECNSTR

(Sound reconstruction)

SPACE ENHANCE

SND REALIZER LEVEL1/ LEVEL2/ LEVEL3

STAGE EQ LOW/ MIDDLE/ HIGH

DRIVE EQ ON

SPEAKER SIZE

X ‘ OVER

[

SUB-W LEVEL

(Not applicable when 3-way crossover is selected.)

R15

F15 (0

):Adjusts the rear and front speaker output balance.

R15 (0

):Adjusts the left and right speaker output balance.

to +6 (0):Preset the initial volume level of each source. (Before

adjustment, select the source you want to adjust.)

(Not applicable for TUNER source and AUX source.)

:Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression.;

(Not applicable for TUNER source.)

SMALL/ MEDIUM/ LARGE OFF

:Cancels.

realistic.;

OFF

:Cancels.

from the speakers.;

: Boosts the frequency to reduce the noise heard from outside the car or running noise of the tyres.;

Depending on the crossover type you have selected crossover or 3-way crossover setting items will be shown. By default, 2-way crossover type is selected.

] is selectable only if [

SUBWOOFER SET

OFF

:Cancels.

:Virtually enhances the sound space.;

:Virtually makes the sound more

:Virtually adjust the sound position heard

OFF

:Cancels.

OFF

:Cancels.

( 5)

] is set to [ON]. ( 9)

, 2-way

( 11)

Crossover settings

Below are the available setting items for 2-way crossover and 3-way crossover.

SPEAKER SIZE

Selects according to the connected speaker size for optimum

performance.

•

The frequency and slope settings are automatically set for the crossover of the selected speaker.

•

If [

NONE

] is selected for [

[

SPEAKER SIZE

X ‘ OVER

[

FRQ

]/ [

Adjusts the crossover frequency for the selected speakers (high pass

filter or low pass filter).

• If [

[

F - HPF SLOPE

[SLOPE]:

Adjusts the crossover slope.

• Selectable only if a setting other than [ crossover frequency.

[

SW LPF PHASE

Selects the phase of the speaker output to be in line with the other

speaker output.

[

GAIN LEFT

Adjusts the output volume of the selected speaker.

The following items is selectable only if [ – [

SUBWOOFER

– [

SUBWOOFER LPF

], the [

F - HPF FRQ

THROUGH

] is selected, all signals are sent to the selected speakers.

]/ [

R - HPF SLOPE

[PHASE]:

]/ [

GAIN RIGHT

]/ [

WOOFER

]/ [

X ‘ OVER

]/ [

R - HPF FRQ

WOOFER

TWEETER

] of [

FRONT

], [

REAR

]/ [

HPF FRQ

HPF SLOPE

THROUGH

]/ [

] and [

]/ [

] is selected for the

SW LPF GAIN

] is set to [ON] ( 9):

] setting of the speaker is not available.

]/ [

SW LPF FRQ

]/ [

F - HPF GAIN

] of [

SPEAKER SIZE

] of [

SW LPF SLOPE

X ‘ OVER

]/ [

R - HPF GAIN

SUBWOOFER SET

]

SUBWOOFER

LPF FRQ

LPF SLOPE

]/ [

GAIN]:

] for

AUDIO SETTINGS

2-way crossover setting items

SPEAKER SIZE

FRONT SIZE

TWEETER

REAR 8CM/ 10CM/ 12CM/ 13CM/ 16 CM/ 17CM/18CM/ 4×6/ 5×7/ 6×8/

SUBWOOFER 16CM/ 20CM/ 25CM/ 30CM/ 38CM OVER/ NONE

X ' OVER

TWEETER FRQ

FRONT HPF F - HPF FRQ

REAR HPF R - HPF FRQ

SUBWOOFER LPF

6×9

7×10/ NONE

GAIN LEFT GAIN RIGHT

F - HPF SLOPE F - HPF GAIN

R - HPF SLOPE R - HPF GAIN SW LPF FRQ

SW LPF SLOPE SW LPF PHASE SW LPF GAIN –8

8CM/ 10CM/ 12CM/ 13CM/ 16CM/ 17CM/ 18CM/ 4×6

5×7/ 6×8/ 6×9/ 7×10

SMALL/ MIDDLE/ LARGE/ NONE

(not connected)

1KHZ/ 1.6KHZ/ 2.5KHZ/ 4KHZ/ 5KHZ/ 6.3KHZ/ 8KHZ

10KHZ/ 12.5KHZ

–8

30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ 100HZ/ 120HZ/ 150HZ/ 180HZ/ 220HZ/ 250HZ/ THROUGH

–6DB/ –12DB/ –18DB/ –24DB –8

(Refer

FRONT HPF

settings above.)

30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ

120HZ/ 150HZ/ 180HZ/ 220HZ/ 250HZ

THROUGH –6DB/ –12DB/ –18DB/ –24DB REVERSE

(180°)/

NORMAL

(not connected)

(0°)

3-way crossover setting items

SPEAKER SIZE

TWEETER

MID RANGE

WOOFER

X ' OVER

TWEETER FRQ

MID RANGE HPF FRQ

WOOFER LPF FRQ

SMALL/ MIDDLE/ LARGE

8CM/ 10CM/ 12CM/ 13CM/ 16CM/ 17CM/ 18CM/ 4×6/ 5×7/ 6×8/ 6×9

16CM/ 20CM/ 25CM/ 30CM/ 38CM OVER/ NONE

1KHZ/ 1.6KHZ/ 2.5KHZ/ 4KHZ/ 5KHZ/ 6.3KHZ/ 8KHZ/

10KHZ SLOPE PHASE GAIN –8

HPF SLOPE LPF FRQ

LPF SLOPE PHASE GAIN –8

SLOPE PHASE GAIN –8

–6DB/ –12DB

REVERSE

30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ

100HZ/ 120HZ/ 150HZ/ 180HZ/ 220HZ/ 250HZ

THROUGH

–6DB/ –12DB

1KHZ/ 1.6KHZ/ 2.5KHZ/ 4KHZ/ 5KHZ/ 6.3KHZ/ 8KHZ/

10KHZ

–6DB/ –12DB

REVERSE

30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ

100HZ/ 120HZ/ 150HZ/ 180HZ/ 220HZ/ 250HZ

THROUGH

–6DB/ –12DB

REVERSE

12.5KHZ

(180°)/

12.5KHZ/ THROUGH

(180°)/

NORMAL

(not connected)

(0°)

ENGLISH

DISPLAY SETTINGS

Set the dimmer

Press and hold DISP (DIMMER) to turn on or off the dimmer.

• If you have set [ hold this button.

Other settings

Press the volume knob to enter [

1 2 Turn the volume knob to select [ 3 Turn the volume knob to select an item (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected/activated or follow

the instructions stated on the selected item.

5 Press and hold to exit.

To return to the previous setting item, press .

DIMMER TIME

], it will be canceled once you press and

FUNCTION

DISPLAY

], then press the knob.

COLOR SELECT

DIMMER

BRIGHTNESS

TEXT SCROLL AUTO/ ONCE

Preset colors:

BLUE2 GREEN2 ORANGERED

Select color for

Select a zone. (See illustration on the left column.)

Select a color for the selected zone.

To make your own color, select [ made will be stored in [

Press the volume knob to enter the detailed color adjustment.

Press S/T to select the color (R/ G/ B) to adjust.

Turn the volume knob to adjust the level (0 — 9), then press the

Dim the display illumination and button illumination.

ON DIMMER TIME

Turn the volume knob to adjust the [ON] time, then press the knob.

Turn the volume knob to adjust the [

(Default: [

Select a zone. (See illustration on the left column.)

2 0

automatically, or scroll only once.;

RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/ BLUE1/

BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/ AQUA2/ GREEN1/

GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/ YELLOW/ ORANGE1/ ORANGE2/

ALL ZONE, ZONE 1

VARIABLE SCAN/

knob.

:Dimmer is turned on.;

:Set the dimmer on and off time.

18:00

; [

— 31: Select your preferred brightness level for display and button

illumination.

:Select whether to scroll the display information

and

CUSTOM R/G/B/

CUSTOM R/G/B

OFF

:Cancels.

OFF

6:00

)

OFF

ZONE 2

separately.

preset colors*

OFF

] time, then press the knob.

:Cancels.

Default:

]. The color you have

TROUBLESHOOTING

Symptom Remedy

Sound cannot be heard.

“MISWIRING CHECK WIRING THEN PWR ON” appears.

“PROTECTING SEND SERVICE” appears.

General

•

Sound cannot be heard.

•

The unit does not turn on.

•

Information shown on the

display is incorrect.

The unit does not work at all. Reset the unit. (

•

Radio reception is poor.

•

Static noise while listening

Radio

to the radio.

Disc cannot be ejected.

Noise is generated. Skip to another track or change the disc. Tracks do not play back as

you intended them to play. “READING” keeps flashing. Do not use too many hierarchical levels or folders.

CD / USB / iPod

Elapsed playing time is not correct.

“LOADING” appears when you enter search mode by pressing

•

Adjust the volume to the optimum level.

•

Check the cords and connections.

Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.

Send the unit to the nearest service center.

Clean the connectors. (

Connect the antenna firmly.

Press and hold not to drop the disc when it is ejected. If this does not solve the problem, reset the unit. (

Playback order is determined when files are recorded.

This is caused by how the tracks are recorded.

This unit is still preparing the iPod/iPhone music list. It may take some time to load, try again later.

14)

3)

to forcibly eject the disc. Be careful

Symptom Remedy

Correct characters are not displayed (e.g. album name).

“NA FILE” Make sure the disc contains supported audio files.

“NO DISC” Insert a playable disc into the loading slot. “TOC ERROR” Make sure the disc is clean and inserted properly. “PLEASE EJECT” Reset the unit. If this does not solve the problem, consult

“READ ERROR” Copy the files and folders onto the USB device again. If this

CD / USB / iPod

“NO DEVICE” Connect a USB device, and change the source to USB again. “COPY PRO” A copy-protected file is played. “NA DEVICE”

3)

“NO MUSIC” Connect a USB device that contains playable audio files. “iPod ERROR”

•

Sound cannot

be heard during playback.

•

Sound output only

from the Android

ANDROID

device.

•

This unit can only display uppercase letters, numbers,

and a limited number of symbols.

•

Depending on the display language you have selected

(

5), some characters may not be displayed correctly.

(



14, 15

)

your nearest service center.

does not solve the problem, reset the USB device or use another USB device.

Connect a supported USB device, and check the connections.

•

Reconnect the iPod.

•

Reset the iPod.

•

Reconnect the Android device.

•

If in [

HAND MODE

on the Android device and start playback.

•

If in [

HAND MODE

application or use another media player application.

•

Restart the Android device.

•

If this does not solve the problem, the connected Android

device is unable to route the audio signal to unit. (

], launch any media player application

], relaunch the current media player

15)

ENGLISH

TROUBLESHOOTING

REFERENCES

Symptom Remedy

Cannot playback at [

BROWSE MODE

“NO DEVICE” or “READING” keeps flashing.

ANDROID

Playback is intermittent or sound skips.

“ANDROID ERROR” / “NADEVICE”

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory. (

When a call comes in, “CALL” appears.

•

To continue listening to the audio system during a call, press

. “CALL” disappears and the audio system resumes.

When the call ends, “CALL” disappears.

resumes.)

•

Make sure KENWOOD MUSIC PLAY APP

is installed on the Android device.

(

7)

•

Reconnect the Android device and

select the appropriate control mode.

•

If this does not solve the problem, the

connected Android device does not support [

BROWSE MODE

•

Switch off the developer options on the

Android device.

•

Reconnect the Android device.

•

If this does not solve the problem, the

connected Android device does not support [

BROWSE MODE

Turn off the power saving mode on the Android device.

•

Reconnect the Android device.

•

Restart the Android device.

17)

(The audio system pauses.)

(The audio system

]. ( 15)

Maintenance

Cleaning the unit

Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector

Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage the connector.

Handling discs

•

Do not touch the recording surface of the disc.

•

Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

•

Do not use any accessories for the disc.

•

Clean from the center of the disc and move outward.

•

Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

•

When removing discs from this unit, pull them out horizontally.

•

Remove burrs from the center hole and disc edge before inserting a disc.

Connector (on the reverse side of the faceplate)

More information

Visit also the following website <www.kenwood.com/cs/ce/> for:

–

Latest firmware updates and latest compatible item list

–

Android™ application KENWOOD MUSIC PLAY

–

Any other latest information

General

•

This unit can only play the following CDs:

•

Detailed information and notes about the playable audio files are stated in an online manual on the following

website: www.kenwood.com/cs/ce/audiofile/

REFERENCES

Playable files

•

Playable audio file: MP3 (.mp3), WMA (.wma), AAC (.aac)

•

Playable disc media: CD-R/CD-RW/CD-ROM

•

Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name.

•

Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device. The AAC (.m4a) file in a USB device or a CD encoded by iTunes cannot be played on this unit.

Unplayable discs

•

Discs that are not round.

•

Discs with coloring on the recording surface or discs that are dirty.

•

Recordable/ReWritable discs that have not been finalized.

•

8cm CD. Attempting to insert using an adapter may cause malfunction.

About USB devices

•

This unit can play MP3/WMA/AAC/WAV/FLAC files stored on a USB mass storage

class device.

•

You cannot connect a USB device via a USB hub.

•

Connecting a cable whose total length is longer than 5m may result in abnormal

playback.

•

This unit cannot recognize a USB device whose rating is other than 5V and

exceeds 1.5A.

About iPod/iPhone

Made for

iPod touch (2nd, 3rd, 4th, and 5th generation)

iPod classic

iPod nano (3rd, 4th, 5th, 6th, and 7th generation)

iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C, 6, 6 Plus

•

You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod.

•

Depending on the version of the operating system of the iPod/iPhone, some

functions may not operate on this unit.

About Android device

•

This unit supports Android OS 4.1 and above.

•

Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory (AOA) 2.0.

•

If the Android device supports both mass storage class device and AOA 2.0, this unit always playback via

AOA 2.0 as priority.

Change the display information

Each time you press

•

If the information is unavailable or not recorded,

name, playing time) appears.

Source name Display information

STANDBY

TUNER

CD or USB

IPOD or ANDROID

AUX

DISP

, the display information changes.

Source name (Date/Clock)

Frequency (Date/Clock)

(For FM Radio Data System stations only)

Station name (Date/Clock) Radio text (Date/Clock) Radio text+ (R.TEXT+) Title (Artist)

(For CD-DA)

Track title (Artist) Track title (Disc name) Track title (Date/Clock) Playing time (Date/Clock)

(For MP3/WMA/WAV/FLAC files)

Track title (Artist) Track title (Album title) Track title (Date/Clock) File name (Folder name) beginning)

Track title (Artist) Track title (Album name) Track title (Date/Clock) Playing time (Date/Clock)

Source name (Date/Clock)

Title (Date/Clock) Frequency (Date/Clock) (back to the beginning)

(back to the beginning)

File name (Date/Clock) Playing time (Date/Clock) (back to the

(back to the beginning)

“NO TEXT”, “NO INFO”, or other information (eg. station

ENGLISH

INSTALLATION / CONNECTION

Warning

•

The unit can only be used with a 12V DC power supply, negative ground.

•

Disconnect the battery’s negative terminal before wiring and mounting.

•

Do not connect Battery wire (yellow) and Ignition wire (red) to the

car chassis or Ground wire (black) to prevent a short circuit.

•

Insulate unconnected wires with vinyl tape to prevent a short circuit.

•

Be sure to ground this unit to the car’s chassis again after installation.

Caution

•

For safety’s sake, leave wiring and mounting to professionals. Consult

the car audio dealer.

•

Install this unit in the console of your vehicle. Do not touch the metal

parts of this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.

•

Do not connect the [ wires of speakers to the car chassis or Ground

wire (black), or connect them in parallel.

•

Mount the unit at an angle of less than 30º.

•

If your vehicle wiring harness does not have the ignition terminal,

connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key.

•

Keep all cables away from heat dissipate metal parts.

•

After the unit is installed, check whether the brake lamps, blinkers,

wipers, etc. on the car are working properly.

•

If the fuse blows, first make sure the wires are not touching car’s

chassis, then replace the old fuse with one that has the same rating.

Basic procedure 1

Remove the key from the ignition switch, then disconnect the [ terminal of the car battery.

2 Connect the wires properly.

See Wiring connection. (

3 Install the unit to your car.

See Installing the unit (in-dash mounting).

4 Connect the [ terminal of the car battery. 5 Press to turn on the power. 6 Detach the faceplate and reset the unit within

5seconds. (

3)

17)

Installing the unit (in-dash mounting)

Hook on the top side

Orientate the trim plate as illustrated before fitting.

How to remove the unit 1

Detach the faceplate.

2 Fit the catch pin on the extraction keys into the

holes on both sides of the trim plate, then pull it out.

3 Insert the extraction keys deeply into the slots

on each side, then follow the arrows as shown on the right.

Part list for installation

(A)

Faceplate

(B)

Trim plate

(C)

Mounting sleeve

Do the required wiring. (

17)

Bend the appropriate tabs to hold the mounting sleeve firmly in place.

(D)

Wiring harness

Dashboard of your car

(E)

Extraction key

Wiring connection

Antenna terminal

Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles

You may need to modify the wiring of the supplied wiring harness as illustrated below.

A7 (Red) Ignition wire (Red)

A4 (Yellow)

Battery wire (Yellow)

Default wiring

Rear/ Front/ Subwoofer output For 3-way crossover: Tweeter/ Mid Range/ Woofer output

Yellow (Battery wire)

UnitVehicle

Red (Ignition wire)

Light blue/yellow (Steering remote control

wire)

If your car does not have an ISO terminal :

We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to

Fuse (10A)

professionals for your safety. Consult your car audio dealer.

When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.

If no connections are made, do not let the wire come out from the tab.

STEERING WHEEL

REMOTE INPUT

REMOTE CONT

To the steering wheel remote control adapter

Pin A4 Yellow

A5 Blue/White A7 Red A8 Black B1

Purple

Purple/black

]

Gray

Gray/black

White

White/black

Green

]

Green/black

: : : :

]

[

]

[

Color and function Battery Power control Ignition (ACC) Earth (ground) connection

Rear speaker (right)

For 3-way crossover: Tweeter (right)

Front speaker (right)

For 3-way crossover: Mid range speaker (right)

Front speaker (left)

For 3-way crossover: Mid range speaker (left)

Rear speaker (left)

For 3-way crossover: Tweeter (left)

Red (A7)

Yellow (A4)

ISO connectors

Blue/White (Power control wire/

Antenna control wire)

Brown (Mute control wire)

ANT CONT

P. CONT

MUTE

To the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle

To the terminal that is grounded when the telephone rings or during conversation

( 14)

(To connect the Kenwood navigation system, refer your navigation manual.)

ENGLISH

SPECIFICATIONS

FM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz space)

Usable Sensitivity (S/N=26dB) 0.71μV/75Ω

Quieting Sensitivity (DINS/N=46dB)

Frequency Response (±3dB) 30 Hz — 15 kHz

Signal-to-Noise Ratio (MONO) 64 dB

Tuner

Stereo Separation (1kHz) 40dB

MW Frequency Range 531kHz — 1611kHz (9kHz space)

Usable Sensitivity (S/N=20dB) 28.2μV

LW Frequency Range 153kHz — 279kHz (9kHz space)

Usable Sensitivity (S/N=20dB) 50.0μV

Laser Diode GaAIAs

Digital Filter (D/A) 8 times over sampling

Spindle Speed 500rpm — 200rpm (CLV)

Wow & Flutter Below measurable limit

Frequency Response (±1dB) 20Hz — 20kHz

Total Harmonic Distortion (1kHz) 0.01%

Signal-to-Noise Ratio (1kHz) 105 dB

CD player

Dynamic Range 90dB

Channel Separation 85dB

MP3 Decode Compliant with MPEG-1/2 Audio Layer-3

WMA Decode Compliant with Windows Media Audio

AAC Decode AAC-LC “.aac” files

2.0μV/75Ω

USB Standard USB1.1, USB2.0 Full Speed

File System FAT12/16/32

Maximum Supply Current DC5V

MP3 Decode Compliant with MPEG-1/2 Audio Layer-3

USB

WMA Decode Compliant with Windows Media Audio

AAC Decode AAC-LC “.aac” files

WAV Decode Linear-PCM

FLAC Decode FLAC file (Up to 48kHz / 16bit)

Maximum Output Power 50W×4

Full Bandwidth Power 22W×4 (at less than 1% THD)

Speaker Impedance 4Ω—8Ω

Tone Action Band 1: 62.5Hz±9dB

Audio

Preout Level/Load (CD) 4000mV/10kΩ

Preout Impedance ≤600Ω

1.5A

Band 2: 100Hz±9dB Band 3: 160 Hz±9dB Band 4: 250 Hz±9dB Band 5: 400Hz±9dB Band 6: 630Hz±9dB Band 7: 1kHz±9dB Band 8: 1.6kHz±9dB Band 9: 2.5kHz±9dB Band 10: 4kHz±9dB Band 11: 6.3kHz±9dB Band 12: 10kHz±9dB Band 13: 16kHz±9dB

SPECIFICATIONS



Frequency Response (±3dB) 20Hz—20kHz

Input Maximum Voltage 1000mV

Auxiliary

Input Impedance 30kΩ

Operating Voltage 14.4V (10.5V—16V allowable)



Maximum Current Consumption 10A

Operational Temperature Range –10°C—+60°C

General

Installation Size (W×H×D) 182mm×53mm×159mm

Weight 1.3kg

Subject to change without notice.

ENGLISH

INHALT VOR DER INBETRIEBNAHME

VOR DER INBETRIEBNAHME 2

GRUNDLAGEN 3

ERSTE SCHRITTE 3

1 Wählen Sie die Anzeigesprache

und brechen Sie die Demonstration ab

2 Stellen Sie die Uhrzeit und das

Datum ein

3 Festlegen der

Anfangseinstellungen

RADIO 5

CD / USB / iPod / ANDROID 7

AUX 9

AUDIOEINSTELLUNGEN 9

DISPLAY-EINSTELLUNGEN 12

FEHLERSUCHE 13

ZUR BEZUGNAHME 14

Wartung Weitere Informationen

EINBAU / ANSCHLUSS 16

TECHNISCHE DATEN 18

WICHTIG

•

Um richtige Verwendung sicherzustellen, lesen Sie die Bedienungsanleitung vor der Verwendung des Produkts sorgfältig durch.

Es ist besonders wichtig, dass Sie die als Warnung und Vorsicht gekennzeichneten Hinweise in dieser Anleitung lesen und beachten.

•

Bitte bewahren Sie die Anleitung an sicherer Stelle und griffbereit zum Nachschlagen auf.

Warnung

Bedienen Sie keine Funktion, die Ihre Aufmerksamkeit vom Straßenverkehr ablenkt.

Vorsicht

Lautstärkeeinstellung:

•

Stellen Sie die Lautstärke so ein, dass Sie immer noch Geräusche von außerhalb des Fahrzeugs hören können, um Unfälle zu

vermeiden.

•

Senken Sie die Lautstärke vor dem Abspielen digitaler Tonquellen, um Beschädigung der Lautsprecher durch plötzliche

Tonspitzen zu vermeiden.

Allgemeines:

•

Vermeiden Sie Verwendung des externen Geräts, wenn dieses das sichere Fahren behindern kann.

•

Stellen Sie sicher, dass alle wichtigen Daten gesichert sind. Wir übernehmen keine Haftung für jeglichen Verlust

aufgenommener Daten.

•

Stellen Sie sicher, dass keine Metallgegenstände (wie etwa Münzen oder Werkzeuge) ins Innere des Geräts gelangen und

Kurzschlüsse verursachen.

•

Wenn ein Disc-Fehler durch Kondensationsbildung auf der Laserlinse auftritt, werfen Sie die Disc aus und warten Sie eine Zeit

lang, bis die Kondensation getrocknet ist.

•

Die USB-Kennung ist auf dem Hauptgerät angegeben. Zum Betrachten nehmen Sie die Frontblende ab.

•

Je nach dem Typ des Fahrzeugs wird die Antenne automatisch ausgeschoben, wenn Sie die Einheit mit angeschlossenem

Antennensteuerkabel ( stellen Sie die Quelle auf STANDBY.

Wie Sie diese Anleitung lesen

•

Die Bedienung wird im Wesentlichen anhand der Tasten auf der Frontblende erläutert.

•

Englischsprachige Anzeigen werden zur Erklärung verwendet. Sie können die Anzeigesprache im [

(

5)

• [XX

] zeigt die gewählten Punkte an.

•

( XX) zeigt an, das Bezugsinformationen auf der angegebenen Seitennummer vorhanden sind.

17) einschalten. Schalten Sie beim Parken in einem Bereich mit niedriger Decke die Einheit aus oder

( 3)

FUNCTION

]-Menü wählen.

GRUNDLAGEN

Frontblende

ERSTE SCHRITTE

DisplayfensterLautstärke-Regler

RücksetzenAnbringen Abnehmen

Drücken Sie den Schalter zweimal innerhalb von 5 Sekunden nach dem Abnehmen der Frontblende.

Abnehmen-Taste

Ladeschlitz

Blinkt wenn die Einheit auf Suchstatus schaltet.

Zum Auf der Frontblende

Einschalten

Einstellen der Lautstärke Drehen Sie den Lautstärke-Regler.

Quelle auswählen

Ändern der Display-Information

Drücken Sie

•

Zum Ausschalten halten Sie die Taste gedrückt.

Drücken Sie

wiederholt.

DISP

wiederholt. ( 15)

Wählen Sie die Anzeigesprache und brechen Sie die Demonstration ab

Beim ersten Einschalten des Geräts (oder wenn [ [

YES

], 4 gestellt ist), erscheint Folgendes im Display: “SEL LANGUAGE”

“PRESS” “VOLUME KNOB”

1 Drehen Sie den Lautstärke-Regler zum Wählen von

[

ENG

](Englisch), [

drücken Sie dann den Regler.

[

ENG

] ist für das ursprüngliche Setup gewählt.

Dann erscheint folgendes in der Anzeige: “CANCEL DEMO”

“PRESS”

2 Drücken Sie den Lautstärke-Regler.

[

YES

] ist für das ursprüngliche Setup gewählt.

3 Drücken Sie den Lautstärke-Regler erneut.

“DEMO OFF” erscheint.

Danach zeigt das Display den gewählten Übergangstyp: “2-WAY X ’ OVER” oder “3-WAY X ’ OVER”

•

Zum Ändern des Übergangstyps siehe “Übergangstyp ändern” ( 5).

RUS

](Russisch) oder [

“VOLUME KNOB”.

FACTORY RESET

SPA

](Spanisch), und

] auf

DEUTSCH

+ 53 hidden pages