Kenwood KCA-HF521 User Manual

KCA-HF521

GSM HANDS FREE UNIT 3 page 2 - 15

INSTRUCTION MANUAL

UNITE MAINS LIBRES POUR GSM 3 page 16 - 29

MODE D’EMPLOI

GSM-FREISPRECHGERÄT 3 Seite 30 - 43

BEDIENUNGSANLEITUNG

HANDSFREE UNIT VOOR GSM 3 blz 44 - 57

GEBRUIKSAANWIJZING

Restriction on GSM Telephone connections

• It is necessary to set the "GSM MODEL SELECT SWITCH", found on the back of the control unit, to the correct GSM model setting. See "GSM MODEL SELECT SWITCH" setting in the <Installation> pages for details of setting.

• In Ericsson Models, you cannot use “@” for any entry into Phone Book or SMS. If the mark is used, it is replaced with a space. However, the “@” mark is displayed at browsing.

• It is not possible to dial a number that includes either of the characters '#' or '*'.

• The correct operation of the unit with Siemens models requires that the supplied charging adapter is plugged into the vehicles cigar lighter socket.

• If the generation of call lists is disabled on the GSM phone, then the redial functionality offered by the KCA-HF521 will be adversely affected.

• You can use the GSM telephone connection to start the automatic downloading. The downloading will be completed in several minutes. It may take more than 10 minutes to finish the downloading, depending on GSM telephone models to be connected.

CAUTION

Before Use

Safety Precaution

To prevent injury and/or fire, take the following precautions:

• Ensure that the unit is securely installed. Otherwise it may fly out of place during collisions and other jolts.

• To prevent short circuits, never put or leave any metallic objects (e.g., coins or metal tools) inside the unit.

• If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer

To prevent damage to the machine, take the following precautions:

• Do not open the covers of the unit.

• Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

• Do not use any screws except for the ones provided. The use of improper screws might result in damage to the main unit.

If you experience problems during installation, consult your Kenwood dealer.

GSM model available for this unit

The GSM models that can be used with KCA- HF521 are as follows: (As of December/2001)

NOTE

2CAUTION

2WARNING

Nokia

Ericsson

Siemens

6110/ 6210

R320/ T28/ A2618

S35/ M35

Brand Name Model Name

GSM Connection Cable (Option)

CAW-NK 511

CAW-ES 511

CAW-SM 511

Kenwood Receivers available for this unit

The receiver units that can be used with KCA-HF521 are as follows: (As of December /2001)

CD Receiver/ Cassette Receiver

KDC-PSW9521/ KDC-M9021/ KDC-8021/ Z838W/ Z738/ Z638/ KDC-MV6521/ KDC-M6021/ KDC-M6021G/ KDC-6021/ X838

Monitor Receiver

KVT-M700

About the KCA-RC420 (Remote controller with [ ] button)

The KCA-RC420 is optional depending on the types of receiver units.

About the disc changer/ CD player/ CA-C1AX to be connected:

• No O-N switch disc changer and CA-C1AX cannot be connected directly. (Except after 2002 models)

• Two disc changer or player cannot be connected (

During KCA-210A is connected).

Restriction on Receivers connected and conditions of operation

Call from Phone Book

Redialling

Manual outgoing call

Automatic incoming call with GSM

Automatic incoming call with hands-free unit

Manual memory download

Phone Book data entry

Phone Book data update

Phone Book data deletion

Notification of new message (SMS)

Message (SMS) browsing

Message (SMS) deletion

Message (SMS) sending

Function

CD/Cassette

Receiver

KVT-M700

ABCABCD

*: Only the caller's phone number will be displayed.

A : During memory download from GSM

Telephone

B : Normal conditions C : During a call

D : While driving (when parking brake

signal is undetected)

Y : Function available N : Function not available

Auto response time adjust:

If the time set in the GSM telephone is shorter than that set in the unit, the former will be used.

Operation <For CD/ Cassette Receiver Unit>

Setting the Menu

Refer to the centre unit (receiver) instruction manual for Menu features.

DISP

MENUSRC

SRC

DISP

DISPAM MENU

“HF WT“/ “HF Wait Time“/ “Wait Time“

“HF MIC“/ “MIC ADJ“/ “HF MIC ADJ”

“HFSP“/ “HFSpeaker“/ “SP SEL“

“GSM SYNC“/ “GSM Memory SYNC”

Auto Response time Adjust

Microphone sensitivity adjust

Phone voice speaker setting

Phone Book/ Message (SMS) data synchronize

“OFF”/”Off”

“01“-“30“

“00“-“31“

“ALL”/“All”

“FL”/ “Front-Left”/ “F-Left”

“FR”/ “Front-Right/ “F-Right”

Auto response function is off

Adjust 1 to 30 seconds

Adjust level from 0 to 31

Phone voice sent to the front and rear speaker.

Phone voice sent to the front left speaker.

Phone voice send to the front right speaker.

Display Adjustment Item Setting

If you have updated GSM telephone after you connected this unit to GSM telephone and synchronized the data, select [SYNC] to synchronize again.

KCA-RC420

About the KCA-RC420 (Remote controller with [ ] button)

The KCA-RC420 is optional depending on the types of receiver units.receiver units.

1 Select the Initial Group

Press the [FM] or [AM] button.

Initials including no corresponding name will not be displayed.

2 Select the Name

Press the [4] or [¢] button.

Switching between the Name and Telephone Number

Press the [DISP] button.

• Not available if the name has not been stored.

• Not applicable if the text scroll function has been set to Auto (in menu).

Dial a selected number

Press the [GSM] button for at least 1 second or press the [ ] button on the remote.

1 Phone Book Search Mode

Hands Free Function

When a Call is Received

"HF CALL" / "CALL" will be displayed.

1 Accept a call

Press any button. (Except SRC, ATT, volume, DISP and 0 buttons)

Switching between the Name and Telephone Number

Press the [DISP] button.

2 Hang up

Press the [GSM] button for at least 1 second or Press the [SRC] button.

12345678

HF CALL

KENWOOD

123456789012

CALL

KENWOOD

CALL

1 Select the GSM mode

Press the [GSM] button for at least 1 second or press the [ ] button on the remote.

2 Select the mode item

Press the [GSM] button.

Each time the button is pressed the mode switches as follows: .

GSM Mode

“Initial“/“Initial Select“

“Redial“

“Dial“/ “Number Dial“

“SMS Mode“

1 Phone Book Search Mode

2 Redial Mode

3 Direct Dial Mode <Function of Remote (KCA-RC420) >

4 SMS Mode (SMS: Short Message Service)

Exit GSM Mode

Display

GSM Mode item

Display Ex, -1

Display Ex, -2

Inserting a CD or cassette tape while a call is in progress will cause the telephone to be hung up.

CAUTION

Display Ex, -1

Display Ex, -2

I n i t i a l

KENWOOD

1 2 3 4 5 6 7 8

Initial Select

KENWOOD

Initial Select

1 2 3 4 5 6 7 8

Operation <For CD/ Cassette Receiver Unit>

1 Enter the telephone number

Press the number [#], [*] and [+](ANG) buttons on the remote.

• You can input max 32 digits

• If an incorrect digit is entered, pressing the [4] button will clear it.

2 Dialling

Press the [GSM] button for at least 1 second or press the [ ] button on the remote.

D i a l

0 1 2 3 4 5 6 7

3 Direct Dial Mode

When New Message is Received

“NEW MSG”/ ”New Message” will be displayed.

1 Select the Message

Press the [FM] or [AM] button.

2 Switch the Display

Press the [4] or [¢] button.

Name/Number j Date j Message (Scrolling text) j Name/Number

Name/Number j Date j Message (1st line) j Message (2nd line) jjj Message (End line) j Name/Number

Switching between the Name and Telephone Number.

Press the [DISP] button.

4 SMS (Short Message Service) Mode

Message

KENWOOD

Name

RICHARD

Number

0 1 2 3 4 5 6 7

Date

1 5 / 0 1 / 02

RICHARD

SMS Mode

0 1 2 3 4 5 6 7

SMS Mode

1 5 / 0 1 / 02

SMS Mode

KENWOOD

SMS Mode

NEW MSG

New Message

1 Switching between the Name and

Telephone Number

Press the [DISP] button.

2 Dialling

Press the [GSM] button for at least 1 second or press the [ ] button on the remote.

2 Redial Mode

Display Ex, -1

Display Ex,-2

Display Ex, -1

Display Ex, -2

Display Ex, -1

Display Ex, 2

Display Ex, -1

Display Ex, -2

Redial

KENWOOD

1 2 3 4 5 6 7 8

Redial

KENWOOD

Redial

1 2 3 4 5 6 7 8

Number Dial

0 1 2 3 4 5 6 7

Auto response time adjust:

If the time set in the GSM telephone is shorter than that set in the unit, the former will be used.

Synchronize the Phone Book data [BOOK]

Touch the [SYNC] button.

Synchronize the Message data [SMS]

Touch the [SYNC] button.

If you have updated GSM telephone after you connected this unit to GSM telephone and synchronized the data, select [SYNC] to synchronize again.

Operation <For KVT-M700>

Phone Setup

Refer to the KVT-M700’s instruction manual for menu screen features.

12:00MENU

SOUND SETUP TUNER

TOUCH

SYSTEMCLOCK

CODE

AV I / F

SOURCE

SYSTEM

PHONE

Setup Menu Screen

PHO EN

PHONEVO I CE

USER

SYN

BOOK

SMS

SEN ECIMS

RE POTUASONSETIME

SYNC

Phone Setup Screen

Select the Phone Setup Screen

Touch the [PHONE] button in the Setup menu screen.

“AUTO RESPONSE TIME“

“MIC SENSE“

“PHONEVOICE“

Auto Response time adjust

Microphone sensitivity adjust

Phone voice speaker setting

“OFF”

“01“-“30“

“00“-“31“

“FL”

“FR”

“USER”

Auto response function is off

Adjust 1 to 30 seconds

Adjust level from 0 to 31

Phone voice sent to the front left speaker.

Phone voice sent to the front right speaker.

Phone voice sent to the Balance/ Fader set.

Display Adjustment Item Setting

FM3 P1 92.5 M FM- I NFO

TUNER

MANU

6P1P2P3P4P5P

12:00IT

PTY

LIST

INFO

FULL

Operation

1 2 3

4 5 6

7 8 9

0 #

1P2P3P

CLR

KENWOOD 012345678

Phone Control Screen

When a Call is Received

Phone control screen is displayed automatically.

Switch to the Phone Control Screen

Press the [TEL] button for at least 1 second.

Accept a call

Touch the [ ] Button.

Hang up

Touch the [ ] Button.

Redialling

Touch the [ ] Button.

Direct Dialling

1 Input the Telephone number

Touch the [0] - [9] , [#], [*] and [+] button.

• You can input max 32 digits

• If an incorrect digit is entered, touching the [CLR] button will delete it. If the [CLR] button is pressed for at least 1 second then the whole telephone number will be deleted.

2 Dialling

Touch the [ ] Button.

Telephone number presets

Up to three preset telephone numbers can be stored.

To store the currently displayed number press the [P1] — [P3] button for at least 1 second.

Preset Call

1 Touch the [P1] — [P3] button. 2 Touch the [ ] Button.

3 Switch to the Phone Setup

Touch the [MENU] button.(☛ Page 7)

3 Switch to the Initial Search Screen

Touch the [ ] button.(☛ Page 9)

3 Switch to the Device Select Screen

Touch the [ ] button.(☛ Page 10)

A telephone number must be entered before this function becomes available.

3 Switch to the SMS Edit Screens

Touch the [ ] button.(☛ Page 13)

A telephone number must be entered before this function becomes available.

3 Switch to the SMS Box Screen

Touch the [ ] button.(☛ Page 12)

Source Control Screen

AUTO Indicator

Auto answer function enabled

Signal Strength Indicator

TEL

Initial Search Screen

Searching for a name

1 Select the character type

Touch the [AB], [ab], [12] or [Ää] button.

2 Select the character list

Touch the [∞] or [5] button.

When all characters are displayed on the character list, [∞] and [5] do not appear.

3 Select the Initial

Touch the (first) initial character.

The phone book list screen is then displayed.

Exit the Initial Search Screen

Touch the [RTN] button.

Return to the Phone control screen.

Phone book List Screen

4 Page up/down for the name list

Touch the [∞] or [5] button.

• When all list of initial are displayed on the name list, [∞] and [5] do not appear.

• Initials including no corresponding name will not be displayed.

5 Select a name

Touch the Name list.

6 Enter the name

Touch the [OK] button.

Switch to the Phone control screen.

Phone Book data deletion

1 Select the name

Touch the Name list.

2 Data deletion

Touch the [CLR] button for at least 1 second.

Edit the Phone Book

Touch the [EDIT] button.

Switch to the Telephone number edit screen. (☛ Page 11)

Exit the Phone book list screen

Touch the [RTN] button.

Return to the Phone control screen.

A B C D E F

G H I J K L

M N O P Q R

S T U V W X

Y Z , . ? !

Ää

PHONE BOO

Initial Search Screen

EDIT

################### ################### ###################

#NAME###########

CLR

PHONE BOO

Phone Book List Screen

Phone Book Search

Operation <For KVT-M700>

Phone Book Data Entry

Input the Telephone number and press the [ ] button in the Phone control screen.

Device select screen is displayed.

Device Select Screen

Choose whether to add Phone Book data to be edited to SIM Card or to Memory built in GSM.

2 Select the Device

To SIM Card:

Touch the [SIM CARD] button.

Switch to the Name edit screen.

To Memory built in GSM:

Touch the [IN MEMORY] button.

Switch to the Name edit screen.

Cancel the Device Select Screen

Touch the [RTN] button. Return to the Phone control screen.

Name Edit Screen

3 Move the cursor to the required

position.

Touch the [<] or [>] button.

4 Select the character type

Touch the [AB], [ab], [12] or [Ää] button.

5 Select the character list

Touch the [∞] or [5] button.

When all characters are displayed on the character list, [∞] and [5] do not appear.

6 Select the character

Touch a character.

7 Repeat steps 3 through 6 and enter

the name.

• The number of characters whose names can be stored will differ depending on the device that is connected. Please see your GSM telephone manual for details.

• To enter a space, touch the [SPC] button.

8 Enter the name

Touch the [OK] button. Return to the Phone control screen.

Cancel the Name Edit Screen

Touch the [RTN] button.

Return to the Device select screen

KENWOOD#####

B C D E F

G H I J K L

M N O P Q R

S T U V W X

Y Z , . ? !

SPC

Ää

PHONE BOO

Name Edit Screen

SELECT DEV I CE

NIMMEROY

ISMCRAD

PHONE BOO

Device Select Screen

Edit Phone Book

Telephone Number Edit Screen

1 Input the Telephone number

Touch the [0] - [9] , [#], [*] and [+] button.

• You can input max 32 digits

• If an incorrect digit is entered, touching the [CLR] button will delete it. If the [CLR] button is pressed for at least 1 second then the whole telephone number will be deleted.

Cancel the Telephone Number Edit Screen

Touch the [RTN] button. Return to the Phone control screen.

2 Edit the Telephone number

Touch the [OK] button. Switch to Name edit screen.

Name Edit Screen

3 Move the cursor to the required

position.

Touch the [<] or [>] button.

4 Select the character type

Touch the [AB], [ab], [12] or [Ää] button.

5 Select the character list

Touch the [∞] or [5] button.

When all characters are displayed on the character list, [∞] and [5] do not appear.

6 Select the character

Touch a character.

7 Repeat steps 3 through 6 and enter

the name.

• The number of characters whose names can be stored will differ depending on the device that is connected. Please see your GSM telephone manual for details.

• To enter a space, touch the [SPC] button.

8 Enter the name

Touch the [OK] button.

Return to the Phone control screen.

Cancel the Name Edit Screen

Touch the [RTN] button.

Return to the Phone control screen.

KENWOOD#####

B C D E F

G H I J K L

M N O P Q R

S T U V W X

Y Z , . ? !

SPC

Ää

PHONE BOO

Name Edit Screen

1 2 3

4 5 6

7 8 9

0 #

CLR

012345678######### ##################

PHONE BOO

Telephone Number Edit Screen

Operation <For KVT-M700>

Browse Messages (SMS)

When New Message is Received

“NEW MESSAGE” will be displayed in the source control screen.

The “ FULL” indicator lights up to show that the memory is full of incoming messages.

1 Switch to the Phone Control Screen

Press the [TEL] button for at least 1 second in the monitor panel.

2 Select the Message List

Touch the [ ] button in the phone control screen.

Message list screen is displayed.

Message List Screen

3 Page up/down for the list

Touch the [∞] or [5] button.

• When all lists are displayed on the message list, [∞] and [5] do not appear.

•

[]: Message in inbox []: Message in outbox

4 Select a message

Touch the list

Message screen is displayed.

Exit the Message List Screen

Touch the [RTN] button.

Return to the Phone control screen.

Message Screen

5 Page up/down for the message

Touch the [∞] or [5] button.

When all messages are displayed on the message screen, [∞] and [5] do not appear.

Delete the Message

Touch the [CLR] button for at least 1 second.

Exit the Message Screen

Touch the [RTN] button.

Return to the Message list screen.

BOX

1/01/02 20:15

#T I TLE##########

1/01/02 21:15

#T I TLE##########

1/01/02 21:35

#T I TLE##########

**/** **:**

Message List Screen

TITLE########### ################

MESSAGE############

################### ################### ################### ################### ################### ################### ###################

BOX

CLR

31/01/02 23:55

Message Screen

FM3 P1 92.5 M FM- I NFO

TUNER

MANU

6P1P2P3P4P5P

12:00IT

PTY

LIST

INFO

FULL

Source Control Screen

Create Message (SMS)

Input the Telephone number and press the [ ] button in the Phone control screen.

SMS Message Input Screen

2 Move the cursor to the required

position.

Touch the [<] or [>] button.

3 Select the character type

Touch the [AB], [ab], [12] or [Ää] button.

4 Select the character list

Touch the [∞] or [5] button.

When all characters are displayed on the character list, [∞] and [5] do not appear.

5 Select character

Touch a character.

6 Repeat steps 2 through 5 and enter

the message.

• You can enter up to 160 characters for each message.

• To enter a space, touch the [SPC] button.

• Touching the [CLR] button briefly will delete the last entered character. If the [CLR] button is touched for at least 1 second then all the entered text will be deleted.

7 Send the message

Touch the [ ] button .

Using the SMS Library Text

Touch the [LB] button.

SMS library text screen is displayed.

SMS Library Text Screen

1 Select the Library Text

Touch a library list item.

2 Enter the Library Text

Touch the [OK] button.

Return to the message input screen.

Cancel the Library Text screen

Touch the [RTN] button.

Return to the message input screen.

Library Text Edit

1 Select the Library Text

Touch a library list item.

2 Switch to the SMS Library Edit Screen

Touch the [EDIT] button.

SMS library edit screen is displayed.

TEXT########

B C D E F

G H I J K L

M N O P Q R

S T U V W X

Y Z , . ? !

SPC

Ää

SMS

CLR

SMS Message Input Screen

#TEXT###########

EDIT

#TEXT###########

SMS L BRA

SMS Library Text Screen

TEXT########

B C D E F

G H I J K L

M N O P Q R

S T U V W X

Y Z , . • -

SPC

Ää

SMS L BRA

CLR

SMS Library Edit Screen

1 Perform the operation from steps 2 to

5 of Input message to edit.

2 Entry the Library Text

Touch the [RTN] button.

Return to the SMS library text screen.

Installation

Accessories

The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above.

■ Securing to audio board

Installation the Control Unit

■ Securing to pile carpet

Installation the Microphone Unit <Accessory A>

Please do not install the unit near the dashboard, the rear tray, or other important components. Doing so could lead to injury or accident should the unit come off due to a shock and strike a person or an important component. Tapping screws should be used for mounting. (Attachment with velcro strips, although easy, can come off with a shock.)

2CAUTION

Accessory C

Accessory D

Peel the release coated paper of double-face adhesive tape to fix on the place shown in the left-hand example.

Adjust the direction of the microphone to the driver.

Fix a cable with a commercial item of clamper

Specifications

Specifications subject to change without notice.

Operating voltage ..............................................................................14.4 V DC (11 to 16 V)

Size ............................................................................................196(W) x 96(H) x 30(D) mm

Mass ............................................................................................................................528 g

Connection

“GSM MODEL SELECT SWITCH” Setting

Connection cable (Provided with the disc changer or disc player)

Accessory B

Receiver Unit

GSM Telephone

Set the switch on the back of the control unit depending on the GSM model to be connected as shown below.

GSM connection cable (Option)

To the cigar lighter socket ( + 12 V)

OFF

Brand Name

OFF

Setting

OFF

567

Model Name

Nokia

Accessory A

• Two disc Changer or Player cannot be connected.

• Connect the KCA-HF521 to the terminal labelled TO CHANGER 2.

• Set the PROTOCOL selection switch to "N" position.

OFF

GSM MODEL SELECT SWITCH

OFF

123456 78

Control Unit

6110

6210

R320

T28 A2618

Ericsson

Siemens

S35 M35

Ensure that the power is off before setting the switch.

Disc Changer/ Disc Player

If you want to connect KCA-S210A

123

456

789

∗ 0#

GSM MODEL SELECT SWITCH

TO MICROPHONE

TO GSM TO CHANGER TO HEAD UNIT

Restrictions concernant les connexions aux GSM

• Il est nécessaire d’installer le "GSM MODEL SELECT SWITCH", situé à l’arrière de l’unité de contrôle, pour la bonne configuration de modèle GSM. Pour plus de détails concernant le réglage du "COMMUTATEUR DE SELECTION DU MODELE GSM", cf. pages <Installation>.

• Les Modèles Ericsson ne permettent pas d’utiliser le signe “@” pour saisir l’Annuaire ou les SMS. Si le signe est tapé, il est automatiquement remplacé par un espace. Toutefois, le signe “@” s’affiche lors de la navigation.

• Il est impossible de composer un numéro comprenant les caractères '#' or '*'.

• Le bon fonctionnement de l’unité avec des modèles Siemens exige que l’adaptateur de charge d’alimentation soit branché sur l’allume-cigare du véhicule.

• Si l’activation des listes d’appel est défaillante sur le téléphone GSM, alors la fonction de rappel offerte par le KCA-HF521 sera irrémédiablement touchée.

• Il est possible d’utiliser la connexion GSM pour démarrer le chargement automatique. Le chargement se fait en quelques minutes. Il est possible que le chargement prenne plus de 10 minutes selon le modèle de GSM à connecter.

ATTENTION

Avant l’utilisation

Précautions de sécurité

Pour éviter toute blessure et/ou incendie, veuillez prendre les précautions suivantes :

• Assurez-vous que l’appareil soit corectement installé. Sinon il risquerait d’être déplacé en cas de collisions ou de cahots.

• Pour éviter les court-circuits, ne jamais mettre ou laisser d’objets métalliques (comme une pièce de monnaie ou un outil ) à l’intérieur de l’appareil.

• Si l’appareil émet de la fumée ou une odeur bizarre, mettez immédiatement l’appareil hors tension et consultez un revendeur Kenwood.

Pour éviter tout dommage à l’appareil, veuillez prendre les précautions suivantes :

• N’ouvrez pas le couvercle de l’appareil.

• N’installez pas l’appareil dans un endroit exposé directement à la lumière du soleil, à une chaleur excessive ou à l’humidité. Evitez aussi les endroits trop poussiéreux et où l’appareil risque d’être éclaboussé.

• Pendant l’installation, n’utilisez aucunes autres vis que celles fournies. L’utilisation de vis incorrectes pourrait endommager l’appareil.

Si vous rencontrez des problèmes pendant l’installation, consultez votre revendeur Kenwood.

Modèle GSM disponible pour cette unité

Les modèles GSM pouvant être utilisés avec le KCA- HF521 sont les suivants : (A compter de décembre 2001)

REMARQUE

2ATTENTION

2AVERTISSEMENT

Nokia

Ericsson

Siemens

6110/ 6210

R320/ T28/ A2618

S35/ M35

Marque Modèle

Câble de connexion GSM (Option)

CAW-NK 511

CAW-ES 511

CAW-SM 511

Récepteurs Kenwood disponibles pour cette unité

Les récepteurs pouvant être utilisés avec le KCA-HF521 sont les suivants: (A compter de décembre /2001)

Ampli-Tuner CD / Ampli-Tuner Cassette

KDC-PSW9521/ KDC-M9021/ KDC-8021/ Z838W/ Z738/ Z638/ KDC-MV6521/ KDC-M6021/ KDC-M6021G/ KDC-6021/ X838

Ampli-Tuner Moniteur

KVT-M700

En ce qui concerne la KCA-RC420 (Télécommande disposant de la touche [ ])

La KCA-RC420 est en option en fonction des types d’unités Ampli-Tuners.

A propos du chargeur / lecteur CD /CA-C1AX devant être connecté :

• Tous les chargeurs CD O-N et CA-C1AX peuvent être connectés directement. (Sauf modèles après

2002)

• Deux chargeurs ou lecteurs CD ne peuvent être connectés (pendant que le KCA-210A est connecté).

Restrictions concernant les Récepteurs connectés et conditions de fonctionnement

*:Seul le N° de téléphone de l’appel sera affiché.

A : Pendant le chargement de la mémoire

du GSM

B : Conditions normales C : Pendant un appel

D : Pendant que vous conduisez (lorsque

vous vous garez, l’appel aux freins n’est pas détecté)

Y : Fonction disponible N : Fonction non disponible

Appel à partir de l’Annuaire

Recomposition

Appel manuel sortant

Appel automatique entrant sur le GSM

Appel automatique entrant sur l’unité mains libres

Chargement manuel de la mémoire

Saisie des données Annuaire

Mise à jour des données Annuaire

Suppression des données Annuaire

Notification d’un nouveau message (SMS)

Navigation à l’intérieur du message (SMS)

Suppression du message (SMS)

Envoyer du message (SMS)

Fonction

Ampli-Tuner

CD/Cassette

KVT-M700

ABCABCD

Réglage du Temps de Réponse Auto:

Si le temps installé dans le téléphone GSM est plus court que celui installé dans l’unité, c’est le premier cité qui sera utilisé.

Fonctionnement <Du Ampli-Tuner CD/ Cassette>

Réglage du Menu

En ce qui concerne les caractéristiques du Menu, se référer aux instructions de l’unité principale (Ampli-Tuner).

“HF WT“/ “HF Wait Time“/ “Wait Time“

“HF MIC“/ “MIC ADJ“/ “HF MIC ADJ”

“HFSP“/ “HFSpeaker“/ “SP SEL“

“GSM SYNC“/ “GSM Memory SYNC”

Réglage du temps de réponse auto

Réglage de la sensibilité du micro

Réglage du haut-parleur téléphone

Annuaire/ Synchronisation des données message (SMS)

“OFF”/”Off”

“01“-“30“

“00“-“31“

“ALL”/“All”

“FL”/ “Front-Left”/ “F-Left”

“FR”/ “Front-Right/ “F-Right”

La fonction réponse auto est désactivée

Ajuster de 1 à 30 secondes

Ajuster le niveau de 0 à 31

Le son téléphone est envoyé sur les haut-parleurs avant et arrière.

Le son téléphone est envoyé sur le haut-parleur avant gauche.

Le son téléphone est envoyé sur le haut-parleur avant droit.

Affichage Rubriques de réglage Réglage

Si vous avez effectué la mise à jour du GSM après l’avoir connecté à cette unité et avoir synchronisé les données, sélectionner [SYNC] pour charger à nouveau.

DISP

MENUSRC

SRC

DISP

DISPAM MENU

KCA-RC420

En ce qui concerne la KCA-RC420 (Télécommande disposant de la touche [ ])

La KCA-RC420 est en option en fonction des types d’unités AmpliTuners.

+ 42 hidden pages