Kenwood DNX891HD, DNX771HD, DNX7710BT, DNX571EX, DNX571HD User Manual

...

DNX891HD DNX7710BT DNX771HD DNX691HD DNX571HD DNX571EX DNX5710BT

GPS NAVIGATION SYSTEM

Quick Start Guide

SISTEMA DE NAVEGACIÓN GPS

Guía de inicio rápido

• You can update the system by connecting a USB device containing an update le. For updating the system, visit <http://www2.jvckenwood.com/cs/ce/>.

• Puede actualizar el sistema conectando un dispositivo USB que incluya un archivo de actualización. Para actualizar el sistema, visite <http://www2.jvckenwood.com/cs/ce/>.

Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DNX891HD/ DNX7710BT/ DNX771HD/ DNX691HD/ DNX571HD/ DNX571EX/ DNX5710BT Serial number

US Residence Only

Contents

About the Quick start guide

About the Quick start guide .................................2

Precautions .................................................................3

Safety Precautions and Important

Informati on ..............................................................5

First Step .......................................................................6

Functions of the Buttons on the Front Panel .8

Common Operations .............................................10

How to Use the Navigation System .................11

How to Play Music ...................................................13

How to Play Movie/Picture ..................................14

How to Listen to the Radio/ HD Radio™ Tuner/

SiriusXM® ................................................................15

How to Make a Phone Call ...................................15

Install ation .................................................................17

About this Unit .........................................................25

This Quick Start Guide describes basic functions of this unit. For functions not described in this Guide, refer to the Instruction Manual on the following website:

http://manual.kenwood.com/edition/im382/

To refer to Instruction manual, a PC loaded with Microsoft® Windows XP/Vista/7 or Mac OS X® 10.4 or later is required in addition to Adobe® Reader™ 7.1 or Adobe® Acrobat® 7.1 or later. The Instruction manual is subject to change for modiﬁcation of speciﬁcations and so forth. Be sure to download the latest edition of the Instruction manual for reference.

✎ NOTE

• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be diﬀerent from the actual panels.

• In this manual, each model name is abbreviated as follows.

– DNX891HD: – DNX7710BT, DNX771HD: – DNX691HD: – DNX571HD, DNX5710BT, DNX571EX:

If above icons are showed, read the article applicable to the unit you use.

• In operation procedures, bracket shape indicates the key or button you should control. < >: indicates the name of panel buttons. [ ]: indicates the name of touch keys

DNX8

DNX6

DNX7

DNX5

2 ñ English

Precautions

#WARNING

Ñ To prevent injury or re, take the following

precautions:

• To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.

• Do not watch or ﬁx your eyes on the unit’s display when you are driving for any extended period.

• If you experience problems during installation, consult your Kenwood dealer.

Ñ Precautions on using this unit

• When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area.

• You can select language to display menus, audio ﬁle tags, etc. See Language setup (P.95) in the Instruction Manual.

• The Radio Data System or Radio Broadcast Data System feature won’t work where the service is not supported by any broadcasting station.

• The unit may not function properly if the connectors between the unit and front panel are dirty. Detach the front panel and clean the connector with a cotton swab gently, being careful not to damage the connector.

Ñ Precautions on battery

• Put the remote control in a place where it will not move during braking or other operations. A dangerous situation could result, if the remote control falls down and gets wedged under the pedals while driving.

• Do not leave the battery near ﬁre or under direct sunlight. A ﬁre, explosion or excessive heat generation may result.

• Do not recharge, short, break up or heat the battery or place it in an open ﬁre. Such actions may cause the battery to leak ﬂuid. If spilled ﬂuid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.

• Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a physician.

Ñ Protecting the monitor

• Put the remote control in a place where it will

not move during braking or other operations. A dangerous situation could result, if the remote control falls down and gets wedged under the pedals while driving.

Ñ Protecting the monitor

Put the remote control in a place where it will not move during braking or other operations. A dangerous situation could result, if the remote control falls down and gets wedged under the pedals while driving.

Ñ Lens fogging

When you turn on the car heater in cold weather, dew or condensation may form on the lens in the disc player of the unit. Called lens fogging, this condensation on the lens may not allow discs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.

Ñ Precautions on handling discs

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

• Do not use disc type accessories.

• Clean from the center of the disc and move outward.

• When removing discs from this unit, pull them out horizontally.

• If the disc center hole or outside rim has burrs, use the disc only after removing the burrs with a ballpoint pen etc.

• Discs that are not round cannot be used.

• 8-cm (3 inch) discs cannot be used.

• Discs with coloring on the recording surface or discs that are dirty cannot be used.

• This unit can only play the CDs with

. This unit may not correctly play discs which do not have the mark.

• You cannot play a disc that has not been ﬁnalized. (For the ﬁnalization process see your writing software, and your recorder instruction manual.)

English ñ 3

Ñ Acquiring GPS signal

The ﬁrst time you turn on this unit, you must wait while the system acquires satellite signals for the ﬁrst time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition. After the system acquires satellites for the ﬁrst time, it will acquire satellites quickly each time thereafter.

Ñ How to reset your unit

If the unit fails to operate properly, press the Reset button. The unit returns to the factory settings.

DNX8 DNX7

Ñ About the front panel

When removing the product from the box or installing it, the front panel may be positioned at the angle shown in (Fig. 1). This is due to the characteristics of mechanism the product is equipped with. When the product is ﬁrst powered on works properly, the front panel will automatically move into the position (initial setting angle) shown in (Fig. 2).

DNX8 DNX7

(Fig. 1) (Fig. 2)

Ñ Cleaning the Unit

If the front panel of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the front panel is stained badly, wipe the stain oﬀ with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.

DNX6 DNX5

✎ NOTE

• Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device connected can damage the data stored in the USB device. For how to disconnect the USB device, see How to Play Music (P.13).

• When the unit is turned on after resetting, the Initial SETUP screen appears. See First Step (P.6).

! CAUTION

• Applying spray cleaner directly to the unit may aﬀect its mechanical parts. Wiping the front panel with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erase screened print.

4 ñ English

Safety Precautions and Important Information

#CAUTION

Failure to avoid the following potentially hazardous situations may result in injury or property damage.

Read this information carefully before starting to operate the Kenwood Car Navigation System and follow the instructions in this manual. Neither Kenwood nor Garmin shall be liable for problems or accidents resulting from failure to observe the instructions in this manual.

#WARNING

Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury.

When navigating, carefully compare information displayed on the navigation system to all available navigation sources, including information from street signs, visual sightings, and maps. For safety, always resolve any discrepancies or questions before continuing navigation. Always operate the vehicle in a safe manner. Do not become distracted by the navigation system while driving, and always be fully aware of all driving conditions. Minimize the amount of time spent viewing the screen of the navigation system while driving, and use voice prompts when possible. Do not enter destinations, change settings, or access any functions requiring prolonged use of the navigation system controls while driving. Stop your vehicle in a safe and legal manner before attempting such operations. Keep the system volume at a low enough level to be able to hear outside noises while driving. If you can no longer hear outside noises, you may be unable to react adequately to the traﬃc situation. This may cause accidents. The navigation system will not display the correct current position of the vehicle the ﬁrst time it is used after purchase, or if the vehicle battery is disconnected. GPS satellite signals will soon be received, however, and the correct position will be displayed. Be careful of the ambient temperature. Using the navigation system at extreme temperatures can lead to malfunction or damage. Also note that the unit can be damaged by strong vibration, by metal objects, or by water getting inside the unit.

The navigation system is designed to provide you with route suggestions. It does not reﬂect road closures or road conditions, weather conditions, or other factors that may aﬀect safety or timing while driving. Use the navigation system only as a navigational aid. Do not attempt to use the navigation system for any purpose requiring precise measurement of direction, distance, location, or topography. The Global Positioning System (GPS) is operated by the United States government, which is solely responsible for its accuracy and maintenance. The government system is subject to changes that could aﬀect the accuracy and performance of all GPS equipment, including the navigation system. Although the navigation system is a precision navigation device, any navigation device can be misused or misinterpreted and, therefore, become unsafe.

IMPORTANT INFORMATION

Ñ Vehicle Battery Preservation

This navigation system can be used when the ignition key is turned to ON or ACC. To preserve the battery, however, it should be used with the engine running whenever possible. Using the navigation system for a long time with the engine switched oﬀ can cause the battery to run down.

Ñ Map Data Information

One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. We use a combination of governmental and private data sources, which we identify in product literature and copyright messages displayed to the consumer. Virtually all data sources contain some inaccurate or incomplete data. In some countries, complete and accurate map information is either not available or is prohibitively expensive.

English ñ 5

First Step

Various setup screens appear automatically before using.

Ñ Initial setup

When you rst turn on the unit, the screen of the conguration setting will appear.

1 Turn the ignition key of your car to ACC.

The unit is turned on. Initial SETUP screen appears.

2 Touch the corresponding key and set the

value.

Color

Set the screen and button illumination color. You can select whether to perform color scan and adjust scanning color. (Instruction Manual P.99) After setting, touch [6].

EXT SW (DNX891HD, DNX7710BT only)

Control the external devices. (Instruction Manual P.1 0 4 ) After setting, touch [6].

Camera

Set the parameters for the camera. (Instruction Manual P.102) After setting, touch [6].

OEM SETUP (North America Sales area only)

This function requires a commercial adaptor. Consult your Kenwood dealer for details.

3 Touch [Finish].

✎ NOTE

• “Initial setup”also appears when the unit is reset.

Locale

Select the country for the navigation system. The language, the distance unit, and the gasoline unit are set. After setting, touch [Enter].

Language

Select the language used for the control screen and setting items. Default is “American English (en)”. (Instruction Manual P.95) After setting, touch [Enter].

Angle

Adjust the position of the monitor. Default is “0”. (Instruction Manual P.98) After setting, touch [6].

DNX8 DNX7

6 ñ English

Ñ iPod/iPhone connection setup

When you rst select iPod as a source, the setting screen of the iPod/iPhone connection will appear.

1 Touch [Menu] on any screen.

Top Menu screen appears.

2 Touch [iPod] in the Top Menu screen.

iPod connection setup screen appears.

3 Touch [CHANGE].

Ñ Application link setup

When you rst select Apps as a source, the setting screen for the connection with the device installed the apps will appear.

1 Touch [Menu] on any screen.

Top Menu screen appears.

2 Touch [Apps] in the Top Menu screen.

Application link setup screen appears.

3 Touch [CHANGE].

Select the way of iPod/iPhone connection. For the details, refer to “iPod/iPhone connection setup” (P.54) in the Instruction Manual.

✎ NOTE

• For the details of the necessary cable and adapter to connect with iPod/iPhone, refer to “iPod/iPhone connection” (P.26).

• When you select “HDMI + BT” or “Bluetooth”, Bluetooth device selection screen will appear. Select the iPod/iPhone to be connected.

If a connectable Bluetooth device is not displayed, touch [Search] and do the pairing of the devices.

• “iPod connection setup” also appears when the unit is reset.

Select the way to connect with the device installed the apps. For the details, refer to ”Application link setup” (P.56) in the Instruction Manual.

✎ NOTE

• For the details of the necessary cable and adapter to connect with iPod/iPhone and Android, refer to “iPod/iPhone connection” (P.26) and “Android connection” (P.26).

• When you select “HDMI + BT”, “HDMI/MHL + BT” or ”Bluetooth”, Bluetooth device selection screen will appear. Select the device to be connected.

If a connectable Bluetooth device is not displayed, touch [Search] and do the pairing of the devices.

• “Application link setup”also appears when the unit is reset.

English ñ 7

Functions of the Buttons on the Front Panel

Ñ DNX891HD/ DNX7710BT/ DNX771HD

1 2 3 4 5 6 7

8 9

No. Name/Motion

s (Reset)

• If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.125).

• This indicator ﬂashes when the vehicle ignition is oﬀ (Instruction Manual P.96).

R , S

• Adjusts volume.

NAV

• Displays the navigation screen.

• Pressing for 1 second switches AV out sources.

AUD

• Displays Graphic Equalizer screen (Instruction Manual P.110).*

• Pressing for 1 second switches camera view display on/oﬀ.

• Displays the Top Menu screen (Instruction Manual P.14).

• Pressing for 1 second turns the power oﬀ.

• When the power oﬀ, turns the power on.

No. Name/Motion

TEL

• Displays the Hands Free screen (Instruction Manual P.85).

• Pressing for 1 second displays the Voice Recognition screen. (Instruction Manual P. 8 8 )

• Ejects the disc.

• When the panel is opened, pressing closes the panel and pressing for 1 second ejects the disc forcibly.

• When the panel is closed, pressing for 1 second fully opens the panel to the location of the SD card slot.

Disc insert slot

• A slot to insert a disc media.

SD card slot

• An SD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system.

* The display may not switch to the Graphic

Equalizer screen in some conditions.

8 ñ English

Ñ DNX691HD/ DNX571HD/ DNX571EX/ DNX5710BT

342

No. Name/Motion

Disc insert slot

• A slot to insert a disc media.

• Ejects the disc.

• Pressing for 1 second ejects the disc forcibly.

s (Reset)

• If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.125).

• This indicator ﬂashes when the vehicle ignition is oﬀ (Instruction Manual P.96).

• Displays the Top Menu screen (Instruction Manual P.14).

• Pressing for 1 second turns the power oﬀ.

• When the power oﬀ, turns the power on.

No. Name/Motion

TEL

• Displays the Hands Free screen (Instruction Manual P.85).

• Pressing for 1 second displays the Voice Recognition screen. (Instruction Manual P. 8 8 )

microSD card slot

• A microSD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system.

* The display may not switch to the Graphic

Equalizer screen in some conditions.

NAV

• Displays the navigation screen.

• Pressing for 1 second switches AV out sources.

Volume knob

• Turning adjusts volume up or down.

• Pressing switches attenuation of the volume on/oﬀ.

• Pressing for 1 second displays Graphic Equalizer screen (Instruction Manual P.11 0 ) .*

English ñ 9

Common Operations

(Scroll)

Scrolls the displayed text.

Ñ General

There are some functions which can be operated from most screens.

[Menu]

Returns to the Top Menu screen. Touching for at least 1 second displays the Screen Control screen. (Even when an image is displayed, touching for at least 1 second displays the Screen Control screen.)

[6] (RETURN)

Returns to previous screen.

etc.

Touch keys with various functions are displayed here. Displayed keys diﬀer depending on the current audio source, status, etc. For examples, see List screen (P.16) in the Instruction Manual.

Ñ Flick scrolling

You can scroll the list screen by icking the screen up/down or right/left.

(common menu key)

Touch to display the common menu. The contents of the menu are as follows.

: Displays the EXT SW Control screen.

(DNX891HD, DNX7710BT only) : Displays the SETUP Menu screen. : Displays the Audio Control Menu screen. : Displays the control screen of current source.

Icon feature diﬀers depending on the source. : Closes the menu.

Ñ List screen

There are some common function keys in the list screens of most sources.

10 ñ English

How to Use the Navigation System

1 Press the <NAV> button to display the

navigation screen.

2) Select a category and a subcategory.

3) Select a destination.

4) Touch [Go!].

✎ NOTE

• To enter letters contained in the name, touch the Search bar and enter the letters.

2 Operate the desired function from the

Main Menu screen.

No. Name/Motion

GPS satellite strength.

Finds a destination.

Views the map.

Uses the Apps such as ecoRoute and Help.

Adjusts the settings.

4 Follow your route to the destination.

✎ NOTICE

• The speed limit icon feature is for information only and does not replace the driver’s responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin and JVC KENWOOD will not be responsible for any traﬃc ﬁnes or citations that you may receive for failing to follow all applicable traﬃc laws and signs.

Your route is marked with a magenta line. As you travel, your navigation system guides you to your destination with voice prompts, arrows on the map, and directions at the top of the map. If you depart from the original route, your navigation system recalculates the route.

✎ NOTE

• You can get additional information about using the navigation system from Help. To display Help, touch [Apps] and then touch [Help].

• For more information about your navigation system, download the latest version of the Owner’s Manual from http://manual.kenwood.com/edition/im382/.

3 Enter your destination and start the

guidance.

󱾁Finding points of interest

1) Touch [Wh ere To?].

No. Name/Motion

Views the Next Turn page or the junction view

page, when available.

Views the Turn List page.

Views the Where Am I? page.

Stops the currents route.

Displays traﬃc information on the route.

Returns to the Main menu.

Displays a diﬀerent data ﬁeld.

Views the Trip Computer.

Displays more options.

7 8 9

English ñ 11

✎ NOTE

• Touch and drag the map to view a diﬀerent area of the map.

• A speed limit icon could appear as you travel on major roadways.

󱾁Adding a stop

1) While navigating a route, touch [ ] and then touch [Where To?].

2) Search for the extra stop.

3) Touch [Go!].

4) Touch [Add to Active Route] to add this stop before your ﬁnal destination.

󱾁Taking a detour

1) While navigating a route, touch [ ].

2) Touch [

Ñ Other Features

󱾁Manually avoiding trac on your route

1) From the map, touch the traﬃc icon.

2) Touch [Traﬃc On Route].

3) If necessary, touch the arrows to view other traﬃc delays on your route.

4) Touch [

] > [Avoid].

󱾁Viewing the trac map

1) The traﬃc map shows color-coded traﬃc ﬂow and delays on nearby.

󱾁About trac

✎ NOTICE

• Traﬃc service is not available in some areas or

countries.

• Garmin and JVC KENWOOD are not

responsible for the accuracy or timeliness of the traﬃc information. With an FM traﬃc receiver, the navigation system can receive and use traﬃc information. When a traﬃc message is received, you can see the event on the map and change your route to avoid the incident. The FM TMC subscription activates automatically after your navigation system acquires satellite signals while receiving traﬃc signals from the service provider. Go to www.garmin.com/kenwood for more information.

󱾁Updating the software

To update the navigation system software, you must have a USB mass storage device and an internet connection.

1) G o to www.garmin.com/Kenwood.

2) Find your model and select [Software Updates] > [Download].

3) Read and accept the terms of the Software License Agreement.

4) Follow the instructions on the Web site to complete the installation of the software update.

󱾁Updating maps

You can purchase updated map data from Garmin or ask your Kenwood dealer or Kenwood service center for details.

1) G o to www.garmin.com/Kenwood.

2) Select [Order Map Updates] for your Kenwood unit.

3) Follow the Web site instructions to update your map.

Ñ How to insert an SD Card/ microSD Card

DNX8 DNX7

1) Press <G> button for 1 second.

2) Hold the SD card with the label facing up, and insert it into the slot until it clicks.

Labelled side

DNX6 DNX5

1) Open the card slot cover.

2) Hold the microSD card with the label facing up, and insert it into the slot until it clicks.

󱾁To eject the card

1) Push the card until it clicks and then remove your ﬁnger from the card.

2) The card pops up so that you can pull it out with your ﬁngers.

12 ñ English

How to Play Music

You can play audio les from music CD, disc media, USB storage device and iPod.

✎ NOTE

• For details on playable ﬁle format, media format, iPod model, etc., refer to the Instruction Manual.

1 Connect the media you want to play as

shown below.

Disc

DNX8 DNX7

1) Press the <G> button to open the front

panel.

2) Insert the disc into the slot. The panel closes automatically and playback starts.

✎ NOTE

• For the details of the necessary cable and adapter to connect with iPod/iPhone, refer to “iPod/iPhone connection” (P.26).

󱾁To disconnect the iPod/iPhone

connected with the cable:

1) Touch [ ] on the screen and then touch

[ G ]. Disconnect the iPod/ iPhone from the cable.

USB device

1) Connect the USB device with the USB cable.

󱾁 To disconnect the USB device:

1) Touch [ G ] on the screen and disconnect the

device from the cable.

󱾁 To eject the disc:

1) Press the <G> button.

DNX6 DNX5

1) Insert the disc into the slot. Playback starts.

󱾁 To eject the disc:

1) Press the <G> button.

iPod/iPhone

1) Connect the iPod/iPhone. Playback starts.

2 Control the music you are listening to on

the source control screen.

The following symbols indicate the keys on the screen. The functions of the keys are the same despite the dierence of the source you are listening to.

Touch [

󱾁Basic operations from this screen

Plays or pauses.

Stops playing.

Disconnects the device.

]

English ñ 13

E F

Searches the previous/next content.

A B or move the cursor in the center bar

Fast forwards or Fast backwards (Disc media, CD, USB device only).

Repeats current content.

Plays all contents in random order.

Operation (P.39) in the Instruction Manual.

How to Play Movie/Picture

You can play DVD video, Video CD (VCD), movie les from disc media, iPod and picture les from USB storage device.

✎ NOTE

• For details on playable ﬁle format, device format, etc., refer to the Instruction Manual.

✎ NOTE

• For other operations, refer to the Instruction Manual.

• If desired key is not displayed in the multi-function bar, touch the [

] to switch the menu.

3 Search the track/le you want to listen to.

󱾁List search

1) Touch center of the screen. The content list of the media being played is displayed. If the information of the current track only is displayed, touch [ display.

󱾁Rened search

1) Touch [ ].

2) Touch the desired reﬁnement method. The list is reﬁned by the item you selected.

3) Touch the desired item.

] to switch the list

1 Connect the media you want to play.

For the method of connecting, see How to Play Music (P.13).

2 Control the movie/picture by touching

the screen.

Each area on the screen has a separate function.

3 3

1 2

No. Name/Motion

DVD: Displays the DVD menu.*

VCD: Displays the Zoom Control screen.* Disc media: Displays the disc menu.*

Displays the Source Control screen.

• Searches the next/previous content or ﬁle.

• Scrolling from center of display to left or right performs fast backward or fast forward. To stop fast backward/forward, touch center of the display.*

✎ NOTE

• For details on searching operations, refer to Search

14 ñ English

*1 See DVD Disc Menu Operation (P.25) in the

Instruction Manual.

*2 See Zoom Control For DVD And VCD (P.26) in

the Instruction Manual.

*3 See Movie Control (P.44) in the Instruction

Manual.

*4 For USB, this function may be unavailable

depending on the playing ﬁle format.

✎ NOTE

• For operations on the source control screen, see How to Play Music (P.13). However, searching by category/link/album artwork is not available.

• Touching [ the source control screen) hides all keys.

] (displayed by touching [ ] in

How to Listen to the Radio/ HD Radio™ Tuner/ SiriusXM®

1 Touch [Menu] on any screen.

Top Menu screen appears.

2 Touch [TUNER], [HD Radio], or [SiriusXM].

The unit switches to the radio/ HD Radio tuner / SiriusXM (sold separately) source.

󱾁Recalling the preset station

1) Touch [P#]. You can also display the preset list by touching the frequency display in the center.

✎ NOTE

• For other operations, see Radio/HD Radio Tuner Basic Operation (P.58) and SiriusXM® Basic Operation (P.68) in the Instruction Manual.

How to Make a Phone Call

You can use your Bluetooth cell-phone when paired to this unit.

✎ NOTE

• You cannot register the Bluetooth unit when you are

using the following sources: iPod, Bluetooth Audio, APPS, iHeart, Pandora

3 Operate on the source control screen.

󱾁Station search

1) Touch [ ]. Sub function menu appears.

2) Touch [AM] or [FM] to select the band. (Radio/ HD Radio tuner only)

3) Radio/ HD Radio tuner: Touch [E] or [F] to tune in the desired station. SiriusXM: Touch [CHS] or [CHR] to tune in the desired station.

󱾁Auto memory (Radio/ HD Radio tuner

only)

1) Touch [ ].

2) Touch [AM] or [FM] to select the band.

3) Touch [

4) Touch [AME].

5) Touch [E] or [F] in the sub function menu. Auto memory starts.

1 Register your cell-phone to the unit.

Follow as the procedures shown below. For detailed operation, see Registering the Bluetooth Unit (P.83) in the Instruction Manual.

1) Touch [Menu] on any screen. Top Menu screen appears.

2) Touch [SETUP]. SETUP Menu screen appears.

3) Touch [Bluetooth]. Bluetooth SETUP screen appears.

4) Touch [Search]. Searched Device List screen appears.

5) Select your cell-phone from the displayed list in the Searched Device List screen.

English ñ 15

1) Touch [ ] (incoming calls), [ ] (missed

calls), or [

2) Select the phone number from the list.

3) Touch [

Call using the phonebook

] (outgoing calls).

6) Enter PIN code form the cell-phone. Registering is completed. The PIN code is set to “0000” as default.

2 Connect your cell-phone to the unit.

1) Touch the device name you want to connect in the Bluetooth SETUP screen.

2) Touch [ON] of [TEL(HFP)] in the BT Connection Settings screen. The selected device is connected to the unit.

1) Touch [

2) Select the name from the list.

3) Select the number from the list.

4) Touch [

Call using the preset number

1) Touch [Preset #] to start calling the corresponding phone number.

2) Touch [

Call by voice

You can make a voice call using the voice recognition function of the cell-phone.

1) Touch [

2) Pronounce the name registered in the cellphone.

✎ NOTE

• For detailed operation, see Using Hands-Free Unit (P.85) in the Instruction Manual.

When registration of your cell-phone is completed, the phone book of the cell-phone is automatically downloaded to this unit.

3 Make or receive a phone call.

See the table below for each operation method.

Call by entering a phone number

1) Enter a phone number with number keys.

2) Touch [

Call using call records

16 ñ English

Installation

Ñ Before Installation

Before installation of this unit, please note the following precautions.

#WARNINGS

• If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a ﬁre. Always connect those wires to the power source running through the fuse box.

• Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must be connected to the wires via the fuse.

#CAUTION

• Install this unit in the console of your vehicle. Do not touch the metal part of this unit during and shortly after the use of the unit. Metal part such as the heat sink and enclosure become hot.

✎ NOTE

• Mounting and wiring this product requires skills and experience. For best safety, leave the mounting and wiring work to professionals.

• Make sure to ground the unit to a negative 12V DC power supply.

• Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

• Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.

If the p

•

• If your car’s ignition does not have an ACC position,

• If the console has a lid, make sure to install the unit so

• If the fuse blows, ﬁrst make sure the wires aren’t

ower is not turned ON (“PROTECT” is displayed), the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked.

connect the ignition wires to a power source that can be turned on and oﬀ with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, such as with battery wires, the battery may be drained.

that the front panel will not hit the lid when closing and opening.

touching to cause a short circuit, then replace the old fuse with one with the same rating.

• Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals.

• Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the ¤ wires or ground them to any metal part in the car.

• When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connect the ¢ connector of the left speaker to a front output terminal, do not connect the ¤ connector to a rear output terminal.

• After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.

• Mount the unit so that the mounting angle is 30° or less.

• This unit has the cooling fan to decrease the internal temperature. Do not mount the unit in a place where the cooling fan of the unit are blocked. Blocking these openings will inhibit the cooling of the internal temperature and result in malfunction.

Cooling fan

• Do not press hard on the panel surface when installing

the unit to the vehicle. Otherwise scars, damage, or failure may result.

• Reception may drop if there are metal objects near

the Bluetooth antenna.

DNX8 DNX7

DNX6 DNX5

Bluetooth antenna unit

English ñ 17

Ñ Supplied accessories

First of all, make sure that all accessories are supplied with the unit.

[1]

[2]

Ñ Unit

1) To prevent a short circuit, remove the key from

the ignition and disconnect the ¤ terminal of the battery.

2) Make the proper input and output wire connections for each unit.

3) Connect the speaker wires of the wiring harness.

4) Connect the wiring harness wires in the following order; ground, battery, ignition.

5) Connect the wiring harness connector to the unit.

6) Install the unit in your car.

7) Reconnect the ¤ terminal of the battery.

8) Press the <Reset> button. (P.4)

9) Perform the Initial Setup. See First Step (P.6).

󱾁Non-Japanese cars

(M5x6mm)

(3.5 m)

(3 m)

[1]

DNX891HD, DNX7710BT, DNX771HD only

[2]

DNX891HD only

(M5x7mm)

Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

󱾁Japanese cars

7 or 8

Car Bracket

7 or 8

18 ñ English

✎ NOTE

• Make sure that the unit is installed securely in place.

If the unit is unstable, it may malfunction (eg, the sound may skip).

Ñ Trim plate

1) Attach accessory 9 to the unit.

󱾁Toyota/Scion cars (DNX891HD)

1) Cut out accessory 5 as illustrated.

Cutting line

󱾁General Motors cars (DNX891HD)

1) Cut out accessory 5 to meet the shape of

the opening of the center console.

2) Attach accessory 5 to the unit.

Cut out to meet the shape of the opening in the vehicle.

2) Fold double-sided adhesive (accessory 6)

along the slit and attach it to accessory 5 cut-out against the center rib as illustrated. Use 2 pieces of accessory 6 for 1 accessory 5 cut-out.

3) Attach accessory 5 cut-out to the unit.

English ñ 19

Ñ GPS antenna

GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle:

1) Clean your dashboard or other surface.

2) Remove the separator of the metal plate

(accessory -).

3) Press the metal plate (accessory -) down ﬁrmly

on your dashboard or other mounting surface. You can bend the metal plate (accessory -) to conform to a curved surface, if necessary.

4) Remove the separator of the GPS antenna

(accessory 0), and stick the antenna to the metal plate (accessory -).

Ñ Microphone unit

1) Check the installation position of the microphone (accessory =).

2) Clean the installation surface.

3) Remove the separator of the microphone (accessory =), and stick the microphone to the place shown below.

4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method.

5) Adjust the direction of the microphone (accessory =) to the driver.

✎ NOTE

• Depending on the type of car, reception of the GPS satellite signals might not be possible with an inside installation.

• Please install this GPS antenna in an area away from any antennas that are used with CB radios or satellite televisions.

• The GPS antenna should be installed at a position that is spaced at least 12 inch (30 cm) from cellular phone or other transmitting antennas. Signals from the GPS satellite may be interfered with by these types of communication.

• Painting the GPS antenna with (metallic) paint may cause a drop in performance.

Fix a cable with a commercial item of tape.

20 ñ English

Ñ Removing the trim plate

1) Engage the catch pins on the extraction key

(accessory4) and remove the two locks on the lower level. Lower the trim plate (accessory9) and pull it forward as shown in the ﬁgure.

Ñ Removing the unit

1) Remove the trim plate by referring to step 1 in “Removing the trim plate”.

2) Insert the two extraction key (accessory4) deeply into the slots on each side, as shown.

9 4

Catch

Lock

✎ NOTE

• The trim plate can be removed from the top side in the same manner.

2) When the lower level is removed, remove the

upper two locations.

3) Lower the extraction key toward the bottom, and pull out the unit halfway while pressing towards the inside.

✎ NOTE

• Be careful to avoid injury from the catch pins on

the extraction key.

4) Pull the unit all the way out with your hands, being careful not to drop it.

English ñ 21

Ñ System connection

Accessory =

Accessory 0

1 1

AV Audio output

Accessory 3

CAMERA

FRONT VIEW

Green/Red

Green/White

Audio/Visual Input

Visual Output

Rear view camera input

Front view camera input (DNX891HD, DNX7710BT only)

To CMOS-3xx series (Optional Accessory) camera control terminal (DNX891HD, DNX7710BT, DNX771HD only)

Accessory 2

Light Green (Parking sensor wire)

For best safety, be sure to connect the parking sensor.

Purple/White (Reverse sensor wire)

Blue/Red (DNX891HD, DNX7710BT only)

Accessory =

Accessory 0

AV Audio output

Connect to the vehicle’s parking brake detection switch harness.

PRK SW

Connect to vehicle’s reverse

REVERSE

RELAY

lamp harness when using the optional rear view camera.

To Relay Box. If no connections are made, do not let the cable come out from the tab.

FM/AM antenna input

22 ñ English

Rear View Camera Input

AV Video Output

Rear Audio Preout

Front Audio Preout

Subwoofer Preout

Accessory 0: GPS Antenna

Accessory =: Bluetooth Microphone

Ñ Connecting wires to terminals

Ignition key switch

ACC

Fus e (10A) Fus e (10A)

Accessory 1

Red (Ignition wire)

Car fuse box (Main fuse)

Car fuse box

Battery

To steering rem ote

To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matched to your car.

To car light control switch

Connect to the terminal that is grounded when either the telephone rings or during conversation. To use the Mute feature, you need to hook up this wire to your telephone by using a commercial telephone accessory.

Yellow (Battery wire)

Black (Ground wire) ¤ (To car chassis)

Light Blue/Yellow (Steering remote control wire)

REMOTE CONT

Orange/White (Dimmer control wire)

STEERING WHEEL

REMOTE INPUT

ILLUMI

Brown (Mute control wire)

MUTE

White/Black

White

Gray/Black

Gray

Green/Black

Green

Purple/Black

Purple

Speaker impedance: 4-8 Ω

To front left speaker

To front right speaker

To rear left speaker

To rear right speaker

Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster ampliﬁer of the ﬁlm-type antenna. (Max. 300mA, 12V)

When using the optional power ampliﬁer, connect to its power control terminal.

Blue (Antenna control wire)

ANT CONT

Blue/White (Power control wire)

P. CONT

If no connections are made, do not let the cable come out from the tab.

English ñ 23

Ñ Optional accessory connection

iPod/ iPhone

KCA-HD100

[4]

(1.8 m)

[3]

5 5

USB terminal

DNX7710BT only)

Lightning Digital AV Adapter

[3]

or Apple 30-pin Digital AV Adapter

[1]

iPod maximum power supply current : DC 5 V = 1 A

[2]

USB maximum power supply current : DC 5 V = 500 mA

[3]

Sold separately

[4]

Optional accessory

Lightning to USB Cable

4 4

USB

[2]

(0.8 m)

(DNX891HD,

[3]

iPod terminal

USB device

[3]

or KCA-iP102 (0.8m)

(0.8 m)

[3]

[1]

[4]

USB terminal (0.8m)

KCA-MH100 (1.8 m)

Video Output (1.8m)

KCA-iP202

Android smartphone

iPod terminal

[4]

[3]

(0.8 m)

iPod

KCA-iP102

[1]

[3]

[4]

AV-IN (CA-C3AV; Optional Accessory) input

iPod/ AV-IN2 (CA-C3AV; Optional Accessory)

input

iDatalink connector (DNX891HD/ DNX771HD/

DNX691HD/ DNX571HD/ DNX571EX only)

SiriusXM Connect Vehicle Tuner connector

(DNX891HD/ DNX771HD/ DNX691HD/ DNX571HD/ DNX571EX only)

✎ NOTE

• When you connect iPod/iPhone with HDMI cable, the necessary cable diﬀers depended on the type of the connecter like Lightning or 30-pin. Refer to “iPod/iPhone connection” (P.26) for the necessary cable.

• The setting is necessary to meet the connected iPod/

iPhone or Android device.

• It is also possible to connect with iPod/iPhone or Android device via Bluetooth. Refer to “iPod/iPhone connection” (P.26) or “Android connection” (P.26).

When you connect the cable

to HDMI/MHL terminal, remove the ﬁxture. After connecting the cable, put the ﬁxture again.

HDMI/ MHL connector

Fixture

24 ñ English

About this Unit

Ñ Copyrights

• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.

• The “AAC” logo is a trademark of Dolby Laboratories.

• “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect speciﬁcally to iPod or iPhone, respectively, and has been certiﬁed by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may aﬀect wireless performance.

• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc.

• HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio, and “Arc” logos are proprietary trademarks of iBiquity Digital Corp.

• Licensing Corporation registered in the U.S., Japan and other countries.

• This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

• Android is a trademark of Google Inc.

• BlackBerry®, RIM®, Research In Motion® and related trademarks, names and logos are the property of Research In Motion Limited and are registered and/or used in the U.S. and countries around the world. Used under license from Research In Motion

is a trademark of DVD Format/Logo

Limited.

• Adobe, Acrobat and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an oﬃcial DivX Certiﬁed® device that plays DivX video. Visit divx.com for more information and software tools to convert your ﬁles into DivX videos.

• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiﬁed® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com for more information on how to complete your registration.

• DivX®, DivX Certiﬁed® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

• THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO ()ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR ()DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM

• THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR () ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR () DECODING MPEG4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM.

English ñ 25

• The terms HDMI and HDMI High-Deﬁnition Multimedia Interface, and the HDMI logo are trademarks or registed trademarks of HDMI Licensing LLC in the United States and other countries.

• MHL and the MHL logo are a trademark or registered trademark of MHL, LLC.

- Incorporates MHL 2

• libFLAC Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2 007,2008,2009 Josh Coalson Redistribution and use in source and binary forms, with or without modiﬁcation, are permitted provided that the following conditions are met:

- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/ or other materials provided with the distribution.

- Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without speciﬁc prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND ONTRIBUTORS ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Ñ Android connection

To connect the Android device with this unit, the cable (sold separately) and the prole which your Android device supports are necessary as follows:

󱾁 To listen to music and watch video of APPS

source

‒ MHL device ‒ KCA-MH100 (Optional Accessory) ‒ Bluetooth proﬁle: SPP

󱾁 To listen to music of APPS source

‒ Bluetooth proﬁle: A2DP ‒ Bluetooth proﬁle: SPP

󱾁 To listen to music of Bluetooth Audio source

‒ Bluetooth proﬁle: A2DP ‒ Bluetooth proﬁle: AVRCP

Ñ iPod/iPhone connection

To connect the iPod/iPhone with this unit, the cable, adapter (both sold separately), and the prole which your iPod/iPhone supports are necessary as follows:

󱾁 To listen music and watch video with

Lightning connector device

‒ Lightning Digital AV Adapter ‒ KCA-HD100 ‒ Lightning to USB Cable (accessory of the

iPod/iPhone)

‒ Bluetooth proﬁle: SPP

󱾁 To listen music with Lightning connector

device

‒ Lightning to USB Cable (accessory of the

iPod/iPhone)

󱾁 To listen music and watch video with 30-pin

connector device (1)

‒ Apple 30-pin Digital AV Adapter ‒ KCA-HD100 ‒ KCA-iP102 ‒ Bluetooth proﬁle: SPP

󱾁 To listen music and watch video with 30-pin

connector device (2)

‒ KCA-iP202

󱾁 To listen music with 30-pin connector device

‒ KCA-iP102

󱾁 To listen to music via Bluetooth

‒ Bluetooth proﬁle: A2DP ‒ Bluetooth proﬁle: SPP

26 ñ English

✎ NOTE

• When connecting with Lightning Digital AV Adapter or Apple 30-pin Digital AV Adapter some

applications can be controlled from this unit. The operable functions depend on the application. Refer to “Apps Operation” (P.51) in the Instruction Manual.

• Do not leave the cable or the adapter made by other makers inside the car. It might lead the malfunction caused by heat.

Ñ Connectable iPod/iPhone

The following models can be connected to this unit.

Made for

• iPhone 5

• iPhone 4S

• iPhone 4

• iPhone 3GS

• iPhone 3G

• iPhone

• iPod touch (5th generation)

• iPod touch (4th generation)

• iPod touch (3rd generation)

• iPod touch (2nd generation)

• iPod touch (1st generation)

• iPod classic

• iPod with video

• iPod nano (7th generation)

• iPod nano (6th generation)

• iPod nano (5th generation)

• iPod nano (4th generation)

• iPod nano (3rd generation)

Ñ Requirements Pandora®:

Requirements for listening to the Pandora® are as follows:

iPhone or iPod touch

• Use an Apple iPhone or iPod touch running under iOS3 or later.

• Search for “Pandora” in the Apple iTunes App Store to ﬁnd and install the most current version of the Pandora® application on your device.

Android™

• Visit the Google play and search for Pandora to install.

BlackBerry®

• Visit www.pandora.com from the built in browser to download the Pandora application.

• Bluetooth must be built in and the following proﬁles must be supported.

- SPP

- A2DP

NOTE

• In the application on your device, log in and create an account with Pandora.

• (If you are not already a registered user, an account can also be created at www.pandora.com.)

• Internet connection by LTE, 3G, EDGE, or WiFi.

• Pandora® is only available in the United States, Australia, and New Zealand.

• Because Pandora® is a third-party service, the speciﬁcations are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable.

• Some functions of Pandora® cannot be operated from this unit.

• For issues using the application, please contact Pandora® at pandora-support@pandora.com.

Ñ About iHeartRadio®:

Requirements for using iHeartAuto™ are as follows:

iPhone or iPod touch

• Use an Apple iPhone or iPod touch running iOS5 or later.

• Search for “iHeartAuto” in the Apple App Store to ﬁnd and install the most current version of the iHeartAuto™ application on your device.

Android™

• Use an Android device with ﬁrmware 2.2 or later.

• Search for “iHeartAuto” on Google play to ﬁnd and install the most current version of the iHeartAuto™ application on your device.

NOTE

• iHeartRadio® is available only in the United States and U.S. Territories

• For the best application experience, a 3G/4G or WiFi connection is recommended.

• Because iHeartAuto™ is a third-party service, the speciﬁcations are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable.

• Some functions of iHeartRadio® cannot be operated from this unit.

• If you experience issues while using the application, please contact iHeartRadio® Customer Care at http://help.iheartradio.com.

• iHeartRadio® and iHeartAuto™ are trademarks owned by Clear Channel Broadcasting, Inc. All uses are authorized under license.

English ñ 27

DNX891HD/ DNX771HD/ DNX691HD/ DNX571HD/ DNX571EX:

Ñ FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modiﬁcations to this equipment may cause harmful interference unless the modiﬁcations are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modiﬁcation is made.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

#CAUTION

Use of controls or adjustments or performance of procedures other than those speciﬁed herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety.

JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN

Location: Top plate DNX891HD/ DNX771HD/ DNX691HD/ DNX571HD/ DNX571EX:

Ñ IC (Industry Canada) Notice

This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1)This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term “IC: ” before the certiﬁcation/ registration number only signiﬁes that the Industry Canada technical speciﬁcation were met.

#CAUTION

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

DNX891HD/ DNX771HD/ DNX691HD/ DNX571HD/ DNX571EX:

• Contains Transmitter Module FCC ID : YZP-RBFAC21XX

• Contains Transmitter Module IC: 7414A-RBFAC21XX

THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.

CALIFORNIA, USA

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate

Información acerca de la eliminación de equipos eléctricos y electrónicos al nal de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos)

Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos.

Los equipos eléctricos y electrónicos al ﬁnal de la vida útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento adecuado a estos productos y a sus subproductos residuales correspondientes. Póngase en contacto con su administración local para obtener información sobre el punto de recogida más cercano. Un tratamiento correcto del reciclaje y la eliminación de residuos ayuda a conservar los recursos y evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente.

Para cumplimiento de la COFETEL:

“La operación de este equipo esta sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.”

Informação sobre a eliminação de pilhas

Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilha usada ao revendedor ou entidade autorizada para que a mesma seja devolvida ao fabricante ou importador. A reciclagem e a eliminação de lixo de maneira apropriada ajudarão a conservar os recursos naturais ao mesmo tempo que prevenirão os efeitos prejudicais à nossa saúde e ao meio ambiente.

+ 184 hidden pages