Kenwood DNX997XR, DNX697S Instruction Manual

DNX997XR DNX697S DNX577S
GPS NAVIGATION SYSTEM
INSTRUCTION MANUAL
• Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from <https://www.kenwood.com/cs/ce/>.
• The Instruction manual is subject to change for modification of specifications and so forth. Be sure to download the latest edition of the Instruction manual for reference. <http://manual.kenwood.com/edition/im402/>
Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System.
Record the serial number, found on the top of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product. Model DNX997XR / DNX697S / DNX577S Serial number
US Residence Only
Register Online
Register your KENWOOD product at www.kenwood.com/usa/
IM402_ref_K_En_10 (K)© 2020 JVCKENWOOD Corporation
Important Notice on Software
Ñ Software License on This
Product
The software embedded in this product comprises a number of independent software components, each of which is copyrighted by JVCKENWOOD Corporation or by a third party.
This product uses software components that are based on an End-User License Agreement (hereinafter called “EULA”) stipulated by JVCKENWOOD Corporation and by third parties.
The EULA dictates the availability of the source codes of free-software components as a prerequisite to distributing them in executable form under the terms of the GNU General Public License or the Lesser General Public License (hereinafter called “GPL/LGPL”). To get information about the software components that are subject to the terms of the GPL/LGPL, please visit the following Website:
Website URL https://www2.jvckenwood.com/gpl/
Queries concerning the contents of the source code or the like will not be accepted.
Please note that software components based on a EULA that is not subject to the terms of the GPL/LGPL or those that have been developed or created by JVCKENWOOD Corporation will be excluded from the scope of source code disclosure.
Because licenses to use software components distributed under the GPL/LGPL are offered to the customers for free of charge, no warranty is granted to the customers, whether explicitly or implicitly, to the extent of the applicable laws.
Unless otherwise stipulated by the applicable laws or agreed upon in writing, the copyright holders or those who are entitled to modify and redistribute the software components are not held responsible for any and all damages resulting from their use or from inability to use them. For more information about the terms of use of the software components, required items of compliance and so on, please refer to the GPL/LGPL.
Customers wishing themselves to use a software component that is subject to the GPL/LGPL embedded in this product are encouraged to read the terms of the corresponding license before use. Because each individual license is prescribed by a third party other than
JVCKENWOOD Corporation, the original (English) of the license is presented.
EULA
Ñ Software License Agreement
JVCKENWOOD Corporation (hereinafter called “Licensor”) holds either the copyright to the embedded software or the right to sublicense it. This agreement establishes the conditions under which the customer uses this “Licensed Software.”
The customer shall agree to the terms of this license agreement before proceeding to use Licensed Software.
This agreement is deemed to have taken effect when the customer (hereinafter called “User”) has used a product implementation of Licensed Software.
The Licensed Software may contain software Licensor has been licensed to use by third parties directly or indirectly. Some third parties may have terms of use prescribed for their customers, apart from this Software License Agreement. This agreement does not apply to such software. Be sure to consult “Important Notice on Software” as presented separately.
Article 1 (General)
Licensor grants to User a non-exclusive, non­assignable right of use Licensed Software within the country where the User purchases the Product (hereinafter the "Country") (except for the exception provided for in Paragraph 1, Article 3).
Article 2 (Right of Use)
1.
The rise of use granted under this agreement
is the right to use Licensed Software in this product.
2.
User may not duplicate, copy, modify, add to,
translate or otherwise alter, or loan licensed Software and the associated literature in whole or in part.
3.
Use of Licensed Software is limited to a private
extent , and Licensed Software may not be distributed, licensed or sublicensed for any purposes whatsoever, including commercial use.
4.
User shall use Licensed Software as per the
instruction manual or instructions given in the help file and may not use or duplicate data in violations of the regulations of the Copyright Law or other governing laws by using Licensed Software in whole or in part.
2
Article 3 (Terms of License)
1.
In assigning this product, User may not retain
the original copy of the embedded Licensed Software (including associated literature, updates and upgrades) and any duplicates and associated literature with regard to the license to use Licensed Software. User may transfer Licensed Software only to the condition of binding the assignee to abide by the terms of this Software License Agreement.
2.
User may not reverse-engineer, disassemble,
decompile or otherwise analyze the source code of Licensed Software.
Article 4 (Rights to Licensed Software)
All rights to Licensed Software and the associated literature, including copyrights, shall reside with Licensor or the original right holder who has granted the Right of Use and right to sublicense to Licensor (hereinafter referred to as “Original Right Holder”), and User does not have any rights other than Right of Use granted hereunder with regard to Licensed Software and the associated literature.
Article 5 (Exemption Granted to Licensor)
1.
Licensor and Original Right Holder do not
assume any responsibility for damages caused to User or third parties resulting from the exercise by User of the license granted hereunder, unless otherwise provided by any law to the contrary.
2.
Licensor does not warrant Licensed Software
to be merchantable, compatible and fit for specific purposes.
Article 6 (Responsibility for Third Parties)
If disputes over the infringement of third parties’ intellectual property rights, such as copyrights and patent rights, arise out of the use of Licensed Software by User, User shall resolve these disputes at User’s own expenses while keep Licensor and Original Right Holder harmless.
Article 7 (Secrecy Obligation)
User shall keep confidential Licensed Software provided hereunder, information contained in the associated literature or the like and those provisions of this agreement not yet in public knowledge and may not disclose or leak these to third parties without prior written consent from Licensor.
Article 8 (Cancellation of the Agreement)
Licensor reserves the right to cancel this agreement forthwith and claim compensation from User for the damages caused by such cancellation when User:
(1)
Breaches any of the provisions of this
agreement, or
(2)
Has received a petition for seizure, provisional
seizure, provisional disposition or any other kind of compulsory execution.
Article 9 (Destruction of Licensed Software)
If this agreement is terminated under the provision of the foregoing paragraph, User shall destroy Licensed Software, along with all associated literature and its duplicates, within two (2) weeks from the date of termination.
Article 10 (Copyright Protection)
1.
Copyrights and all other intellectual property
rights relating to Licensed Software shall reside with Licensor and Original Right Holder and in no circumstances with User.
2.
User shall abide by the laws relating to
copyrights and intellectual property rights in using Licensed Software.
Article 11 (Export Control)
1.
Licensed Software and the associated
literature or the like may not be exported to places outside the Country (including transmission outside the Country over the Internet or the like).
2.
User agrees that Licensed Software is subject
to export controls imposed by the Country and the United States of America.
3.
User agrees to comply with all the
international and domestic laws that apply to this software (U.S. Export Administration Regulations and regulations established by the U.S., the Country and their governmental agencies regarding usage by end users and export destinations).
Article 12 (Miscellaneous)
1.
Even if this agreement is invalidated in part by
law, all other provisions shall remain in effect.
2.
Licensor and User shall consult each other in
good faith to resolve any matters not provided for in this agreement or questions arising from the interpretation of this agreement.
3.
Licensor and User agree that this agreement
is governed by the law of Japan and that all disputes involving claims and obligations that may arise out of this agreement will be settled by arbitration at the Tokyo District Court as the court of first instance.
3
Contents
Before Use 6
Precautions ................................................................... 6
Safety Precautions
and Important Information ............................... 7
How to read this manual ......................................... 8
Basic Operations 9
Functions of the Buttons on the Front Panel ... 9
Turning on the Unit .................................................11
Initial Settings ............................................................12
Adjusting the volume .............................................13
Display Adjustment .................................................14
Viewing Angle ...........................................................14
Touch screen operations .......................................15
HOME screen descriptions ....................................15
Popup menu ..............................................................16
Source selection screen description ..................16
Source control screen descriptions ...................19
List screen ...................................................................20
Navigation Operation .............................................20
Widget 25
Widget ..........................................................................25
Multi Widget ...............................................................25
Weather Widget ........................................................27
Photo Frame Widget ...............................................27
Widget SETUP ............................................................28
Disc 29
Playing a disc .............................................................29
DVD/VCD Basic Operation ....................................30
Music CD/Disc media Basic Operation .............31
File search Operation ..............................................33
DVD Disc Menu Operation ....................................33
DVD SETUP .................................................................34
APPS 36
Wireless Mirroring Operation ...............................36
USB Mirroring Operation .......................................36
Apple CarPlay Operation .......................................38
Android Auto™ Operation .....................................41
USB/SD 44
Connecting a USB device ......................................44
Inserting the SD ........................................................44
USB/SD Basic Operation.........................................45
Search Operation ......................................................47
iPod/iPhone 48
Preparation .................................................................48
iPod/iPhone Basic Operation ...............................48
Search Operation ......................................................49
Radio (DNX577S) 51
Radio Basic Operation ............................................51
Memory Operation ..................................................52
Selecting Operation ................................................53
Traffic Information ...................................................53
HD Radio™ Tuner 54
HD Radio Tuner Basic Operation .........................54
Receive Mode ............................................................56
Memory Operation ..................................................56
Selecting Operation ................................................56
Bookmark ....................................................................58
Alert Message ............................................................59
4
SiriusXM® 60
SiriusXM® Basic Operation ....................................60
Storing Channels in Preset Memory ..................62
Preset select ...............................................................62
Direct search ..............................................................62
Category/Channel search ......................................63
Replay ...........................................................................63
TuneMix™ ....................................................................64
SmartFavorites, TuneStart™ .................................. 64
TuneScan™ ..................................................................64
Traffic & Weather Now™ .........................................65
Content Alerts............................................................65
SportsFlash™ ..............................................................66
SiriusXM SETUP .........................................................66
Bluetooth Control 72
Information for using Bluetooth® devices .......72
Register the Bluetooth device .............................73
Bluetooth Setup ........................................................74
Playing the Bluetooth Audio Device .................76
Using the Hands-Free Unit ....................................78
Hands-Free Setup .....................................................82
Controlling Audio 95
3-way speaker system setup ................................95
Speaker / X’over setup ............................................96
Controlling General Audio ....................................98
Equalizer Control ......................................................98
Volume Offset ............................................................99
Zone Control ........................................................... 100
Sound Effect ............................................................ 100
Listening Position / DTA ...................................... 101
Audio Setup memory .......................................... 103
Remote control 104
Battery Installation ................................................ 104
Functions of the Remote control Buttons .... 104
Connection/Installation 107
Before Installation ................................................. 107
Installing the unit .................................................. 109
Troubleshooting 118
Problems and Solutions ...................................... 118
Error Messages ....................................................... 119
Other External Components 84
View Camera ..............................................................84
Use Dashboard Camera..........................................86
External audio/video players (AV-IN).................87
OEM Features Operation .......................................88
Setup 89
Monitor Screen Setup .............................................89
System Setup .............................................................89
User Interface Setup ................................................90
Special Setup .............................................................91
Display Setup .............................................................92
AV Setup ......................................................................94
Appendix 121
Playable Media and Files.....................................121
Region Codes in the World ................................123
DVD Language Codes .......................................... 124
Specifications .......................................................... 125
About this Unit ....................................................... 129
5English

Before Use

Before Use

Precautions

# WARNINGS
Ñ To prevent injury or fire, take
the following precautions:
• To prevent a short circuit, never put or leave any metallic objects (such as coins or metallic tools) inside the unit.
• Do not watch or fix your eyes on the unit’s display when you are driving for any extended period.
• If you experience problems during installation, consult your KENWOOD dealer.
Ñ Precautions on using this unit
• When you purchase optional accessories, check with your KENWOOD dealer to make sure that they work with your model and in your area.
• You can select a language to display menus, audio file tags, etc. See User Interface Setup (P. 90).
• The Radio Data System or Radio Broadcast Data System feature won’t work in areas where the service is not supported by any broadcasting station.
Ñ Protecting the monitor
• To protect the monitor from damage, do not operate the monitor using a ball point pen or similar tool with a sharp tip.
Ñ Lens fogging
When you turn on the car heater in cold weather, dew may form on the lens in the disc player of the unit due to condensation. This condensation on the lens (also called lens fogging) may not allow discs to play. In such a situation, remove the disc and wait for the dew to evaporate. If the unit still does not operate normally after a while, consult your KENWOOD dealer.
Ñ Precautions on handling discs
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
• Do not use disc type accessories.
• Clean the disc from the center toward the outside rim.
• When removing a disc from this unit, pull it out horizontally.
• If the disc center hole or outside rim has burrs, use the disc only after removing the burrs with a ballpoint pen etc.
• Discs that are not round cannot be used.
• 8-cm (3 inch) discs cannot be used.
• Discs with coloring on the recording surface or discs that are dirty cannot be used.
• This unit can only play the following types of CDs.
Ñ Cleaning the unit
• If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe it with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.
NOTE
• Applying spray cleaner directly to the unit may damage its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erase the screened print.
6
• This unit may not correctly play discs which do not have the mark.
• You cannot play a disc that has not been finalized. (For the finalization process, see your writing software and your recorder's instruction manual.)
Before Use
Ñ Acquiring GPS signal
The first time you turn on this unit, you must wait while the system acquires satellite signals for the first time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition.
After the system acquires satellites for the first time, it will acquire satellites quickly each time thereafter.
Ñ About GLONASS
This unit uses Global Navigation Satellite System (GLONASS) in addition to GPS.
Combining GPS and GLONASS can refine positioning accuracy than using GPS only.
Ñ Caution for Smartphone Users
Simultaneously running multiple applications on your smartphone while screen sharing places heavy demand on the microprocessor of the phone, potentially affecting communication and performance.
For best results while pairing with your Kenwood receiver, please be sure to close any unused applications.

Safety Precautions and Important Information

Read this information carefully before starting to operate the KENWOOD Car Navigation System and follow the instructions in this manual. Neither KENWOOD nor Garmin shall be liable for problems or accidents resulting from failure to observe the instructions in this manual.
# WARNING
Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury.
When navigating, carefully compare information displayed on the navigation system to all available navigation sources, including information from street signs, visual sightings, and maps. For safety, always resolve any discrepancies or questions before continuing navigation.
Always operate the vehicle in a safe manner. Do not become distracted by the navigation
system while driving, and always be fully aware of all driving conditions. Minimize the amount of time spent viewing the screen of the navigation system while driving, and use voice prompts when possible.
Do not enter destinations, change settings, or access any functions requiring prolonged use of the navigation system controls while driving. Stop your vehicle in a safe and legal manner before attempting such operations.
Keep the system volume at a low enough level to be able to hear outside noises while driving. If you can no longer hear outside noises, you may be unable to react adequately to the traffic situation. This may cause accidents.
The navigation system will not display the correct current position of the vehicle the first time it is used after purchase, or if the vehicle battery is disconnected. GPS satellite signals will soon be received, however, and the correct position will be displayed.
Be careful of the ambient temperature. Using the navigation system at extreme temperatures can lead to malfunction or damage. Also note that the unit can be damaged by strong vibration, by metal objects, or by water getting inside the unit.
7English
Before Use
# CAUTION
Failure to avoid the following potentially hazardous situations may result in injury or property damage.
The navigation system is designed to provide you with route suggestions. It does not reflect road closures or road conditions, weather conditions, or other factors that may affect safety or timing while driving.
Use the navigation system only as a navigational aid. Do not attempt to use the navigation system for any purpose requiring precise measurement of direction, distance, location, or topography.
The Global Positioning System (GPS) is operated by the United States government, which is solely responsible for its accuracy and maintenance. The government system is subject to changes that could affect the accuracy and performance of all GPS equipment, including the navigation system. Although the navigation system is a precision navigation device, any navigation device can be misused or misinterpreted and, therefore, become unsafe.
Ñ IMPORTANT INFORMATION
Vehicle Battery Preservation
This navigation system can be used when the ignition key is turned to ON or ACC. To preserve the battery, however, it should be used with the engine running whenever possible. Using the navigation system for a long time with the engine switched off can cause the battery to run down.
Map Data Information
One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. We use a combination of governmental and private data sources, which we identify in product literature and copyright messages displayed to the consumer. Virtually all data sources contain some inaccurate or incomplete data. In some countries, complete and accurate map information is either not available or is prohibitively expensive.

How to read this manual

• The screens and panels shown in this manual are examples used to provide a clear explanation of operations. For this reason, they may be different from the actual screens or panels, or some display patterns may be different from the actual ones.
Display language: English is used for the purpose of explanation. You can select a display language from the [SETUP] menu. See User Interface Setup (P. 90).
8

Basic Operations

Functions of the Buttons on the Front Panel

DNX997XR
1 2 3 4 5 6 7
DNX697S / DNX577S
10 18
Basic Operations
8 9
4
2
3 5 6
9English
Basic Operations
NOTE
• The panels shown in this manual are examples used to provide a clear explanation of operations. For this reason, they may be different from the actual panels.
Number Name Motion
Remote
1
Sensor
S, R
2
(Volume)
NAV/[ ]
3
HOME/[ ]
4
MENU/[ ]
5
6
G
7
Disc insert
8
slot
SD card slot • A slot to insert an SD card.
9
microSD
10
card slot
• Receives the remote control signal.
• Adjusts the volume.
The volume will go up to 15 when you keep pressing R. (P. 13)
• Displays the navigation screen.
• Pressing and holding switches view camera display on/off. The camera whose view is displayed first changes according to the "Camera Setup" setting and the shift lever position in the shift gate. The camera whose view was displayed last is kept and the same camera view will be displayed the next time. If its assignment setting is changed, the rear camera view is displayed.
• Displays the HOME screen (P.15).
• Pressing for 1 second turns the power off.
• When the power is off, turns the power on.
• Displays the popup menu screen.
• Pressing for 1 second switches attenuation of the volume on/off.
• Displays the APP (Apple CarPlay/Android Auto/Wireless Mirroring) screen.
• Pressing and holding displays the Voice Recognition screen (P. 80).
• When neither Apple CarPlay, Android Auto, nor a Bluetooth Hands-Free phone is connected, pressing and holding displays Bluetooth pairing waiting dialog. (P. 73)
• Displays the Angle Adjust screen.
[DISC E JECT]: Ejects the disc. – [OPEN]: Fully opens the panel to the location of the SD card slot.
• When the panel is opened, closes the panel.
• To forcibly eject the disc, press it for 2 seconds and then touch [DISC EJECT] after the message is displayed.
(DNX997XR only)
• A slot to insert a disc media.
• You can play audio/visual files in the card. *
• An SD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system. *
1
2
*1 If the map update file remains in the SD card, you cannot play audio/visual files. *2 The system of the unit is rebooted after inserting/removing the MAP SD. (DNX997XR only)
• A slot to insert a microSD card.
• You can play audio/visual files in the card. *
• A microSD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system. *
1
2
*1 If the map update file remains in the microSD card, you cannot play audio/visual
files. *2 The system of the unit is rebooted after inserting/removing the MAP SD. (DNX697S / DNX577S only)
10
Basic Operations

Turning on the Unit

The method of turning on is different depending on the model.
Press the [HOME]/[ ] button.
1
DNX997XR
DNX697S / DNX577S
The unit is turned on.
● To turn off the unit:
Press the [HOME]/[ ] button for 1 second.
1
NOTE
• If it is your first time to turn the unit on after installation, it will be necessary to perform Initial SETUP ( P.12).
11English
Basic Operations

Initial Settings

Initial SETUP
Perform this setup when you use this unit first time.
Set each item as follows.
1
[Locale]
Select the country for the navigation system. The language, the distance unit, and the
gasoline unit are set.
1 Touch [Locale]. 2 Select the desired country.
[Language]
Select the language used for the control screen and setting items. Default is “American English(en)”.
1 Touch [Language]. 2 Touch [Language Select]. 3 Select the desired language. 4 Touch [
For details, see User Interface Setup (P. 90).
[Display]
Set the key illumination color. If it is hard to see the image on the screen
even, adjust the viewing angle.
1 Touch [Display]. 2 Touch [Key Color]. 3 Select the desired color. 4 Touch [
].
].
(DNX997XR only)
5 Touch [Display Adjustment]. 6 Adjust a viewing angle and a tilt position. 7 Touch [
For details, see Display Adjustment (P. 14).
(DNX697S / DNX577S only)
5 Touch [Viewing Angle]. 6 Select a viewing angle. 7 Touch [
For details, see Viewing Angle (P.14).
For details, see Display Setup (P.92).
[Camera]
Set the parameters for the camera.
1 Touch [Camera]. 2 Set each item and touch [
For details, see Camera Setup (P.84).
[OEM SETUP]
This function requires a commercial adaptor. Consult your KENWOOD dealer for details.
[DEMO]
Set the demonstration mode. Default is “ON”.
Touch [Finish].
2
NOTE
• These settings can be made from the SETUP menu. See Setup (P.89).
].
].
].
12
Basic Operations
Calendar/clock settings
Press the [MENU]/[ ] button.
1
Popup menu appears.
Touch [SETUP].
2
SETUP Menu screen appears.
Touch [User Interface].
3
User Interface screen appears.
Set each item as follows.
4
Scroll the page to show hidden items.
NOTE
• Please set the date and time. If they are not set, some functions may not work.

Adjusting the volume

You can adjust the volume (0 to 40). Press [R] to increase, and press [S] to decrease. Holding [R] increases the volume continuously
to level 15.
DNX997XR
DNX697S / DNX577S
[Time Format]
Select the time display format.
[12-Hour] (Default)/[24-Hour]
[Clock]
[NAV-SYNC ](Default): Synchronizes the clock
time with navigation GPS data.
[Manual]: Set the clock manually.
[Time Zone]
If you have selected [Manual] for Clock, select the time zone.
[Clock Adjust]
If you select [Manual] for Clock, adjust the date and time manually. (P. 91)
13English
Basic Operations

Display Adjustment (DNX997XR)

Press the [G] button.
1
Display Adjustment screen appears.
1 2
3
1
Viewing Angle
You can adjust the viewing angle when the image on the screen is difficult to see evenly. The smaller the (negative) value, the more whitish the image on the screen looks. "0" (Default)/"-1"/"-2"/"-3"
2
Angle Adjustment
Select a tilt position you want to set up. Default is "0".
3
Off Position
You can store the current monitor angle as the angle during power off. Touch [Memory] when the desired angle is selected.
Viewing Angle (DNX697S / DNX577S)
You can adjust the viewing angle when the image on the screen is difficult to see evenly. The smaller the (negative) value, the more whitish the image on the screen looks.
Press the [ ] button.
1
Popup menu appears.
Touch [SETUP].
2
Touch [Display].
3
Display screen appears.
Touch [Viewing Angle].
4
Select an angle you want to set up.
5
Default is "0". ( P.92)
14
Basic Operations

Touch screen operations

To perform operations on the screen, you need to touch, touch and hold, flick or swipe to select an item, display a setting menu screen or change pages.
● Touch
Touch the screen gently to select an item on the screen.
● Touch and hold
Touch the screen and keep your finger in place until the display changes or a message is displayed.
● Flick
Slide your finger quickly to the left or right on the screen to change the page.
You can scroll a list screen by flicking up/down on the screen.
● Swipe
Slide your finger up or down on the screen to scroll the screen.

HOME screen descriptions

Most functions can be performed from the HOME screen.
1
2
3
• Widget (P.25)
1
– You can change the widget by flicking left
or right on the widget area.
– Touch the widget to display the detailed
screen.
• Displays the source selection screen. (P.17)
2
• Short-cut playback source icons (P. 17)
3
Display the HOME screen
Press the [HOME]/[ ] button.
1
DNX997XR
DNX697S / DNX577S
HOME screen appears.
15English
Basic Operations

Popup menu

Press the [MENU]/[ ] button.
1
Popup menu appears.
Touch to display the popup menu.
2
DNX997XR
1
DNX697S / DNX577S
1
The contents of the menu are as follows.
• Displays the Screen Adjustment screen.
(P. 89)
• Turns the display off. (P. 16)
• Short-cut source icons: The source
1
changes to the one you have set with a short-cut. For the short-cut setting, refer to Customize Short-cut source icons on HOME screen (P.18).
Turn off the screen
Select [Display OFF] on the popup menu.
1
NOTE
• Touch the display to turn on the screen.
• To display the clock while the screen is off, it is necessary to set "OSD Clock" to "ON". (P.92)

Source selection screen description

You can display icons of all playback sources and options on the source selection screen.
321
16
• Displays the view camera screen.
(P. 84)
• Displays the SETUP Menu screen.
(P. 89)
• Displays the Audio screen. ( P.95)
• Displays the control screen of current source. Icon feature differs depending on the source. This icon is for USB source.
• Close the popup menu.
DNX997XR only
• Touch to eject the disc.
• Touch for 2 seconds to forcibly eject the disc and then touch [Ye s] after the message is displayed.
DNX697S / DNX577S only
• Displays the Android Auto device list. This icon appears only when Android Auto is connected and two or more devices can be used as Android Auto source.
DNX997XR / DNX697S only
4 5
• Changes playback sources.
1
For playback sources, see Select the playback source (P.17).
• Page indication
2
3
• Changes pages. (Touch [ ]/[ ].) You can also change pages by flicking left or right on the screen.
• Returns to the previous screen.
4
• Displays the SETUP Menu screen. (P. 89)
5
Basic Operations
Select the playback source
Press the [HOME]/[ ] button.
1
HOME screen appears.
Touch [ ].
2
From the screen, you can select the following sources and functions.
• Displays the navigation screen. ( P.20)
• Switches to the Apple CarPlay screen from the connected iPhone. (P. 38)
• Switches to the Android Auto screen from the connected Android smartphone. ( P.41)
• Displays the Hands Free screen. ( P.78) When neither Apple CarPlay, Android Auto, nor a Bluetooth Hands-Free phone is connected, displays Bluetooth pairing waiting dialog.*1 (P. 73)
• Switches to the Radio broadcast.
(P. 51)
DNX577S only
• Switches to the HD Radio broadcast.
(P. 54)
DNX997XR / DNX697S only
• Switches to the SiriusXM® satellite radio broadcast. (P. 60)
• Plays a Bluetooth audio player. (P. 76)
• Plays a disc. ( P.29)
• Displays the Audio screen. ( P.95)
• Puts the unit in standby. ( P.18)
• For sources and information displayed when an ADS adapter is connected, see OEM Features Operation (P. 88).
*1 When connecting as Apple CarPlay or Android Auto,
it works as a phone provided in Apple CarPlay or Android Auto. If Apple CarPlay or Android Auto are connected during talking by the Bluetooth device or iDataLink phone, the current call will be continued.
*2 CA-C3AV (optional accessory) is connected to the
AV-IN input terminal for visual. (P.113)
To select the playback source on the HOME screen
The 4 items displayed on the source selection screen with large icons are shown on the HOME screen.
You can change the items displayed on this area by customizing the source selection screen. (P. 18)
• Plays an iPod/iPhone. ( P.48)
• Plays files on a USB device. ( P.44)
• Plays files on an SD card. ( P.44)
• Switches to an external component connected to the AV-IN input terminal.*2
(P. 87)
• Switches to the Wireless Mirroring screen from the connected Android smartphone. ( P.36)
DNX997XR only
• Switches to the USB Mirroring screen from the connected iPhone/Android smartphone. ( P.36)
17English
Basic Operations
To select the playback source on the source control screen
Display source selection icons by touching [ ]/[
] or flicking left or right on the source control
screen, then select a playback source.
Put the unit in standby
Press the [HOME]/[ ] button.
1
HOME screen appears.
Touch [ ].
2
Touch [STANDBY].
3
Customize Short-cut source icons on HOME screen
You can arrange the positions of the source icons as you like.
Press the [HOME]/[ ] button.
1
HOME screen appears.
Touch [ ].
2
Touch and hold the icon which you want
3
to move in the customizing mode.
Drag the icon to the desired position.
4
Changes the page
18
Basic Operations

Source control screen descriptions

There are some functions which can be performed from most screens.
Indicators
4
5
6
7
1 2
Navigation information
Short-cut source icons
1
All sources icon
Displays the source selection screen. (P. 16)
2
Secondary screen
[
]/[ ] : The Secondary screen changes to
another one every time you touch it. You can also change the Secondary screen by flicking left or right on the screen.
• Indicators: Displays the current source condition and so on.
[AT T]: The attenuator is active. – [DUAL]: The dual zone function is active. – [MUTE]: The mute function is active. – [LOUD]: The loudness control function is active.
• Navigation information: Displays the current location and the direction. The screen changes to the navigation screen when you touch here.
• Short-cut source icons: The source changes to the one you have set with a short-cut. For the short-cut setting, refer to Customize Short- cut source icons on HOME screen (P.18).
3
Content list
Displays the track/file/station/channel list.
3
4
• Connected Bluetooth device information.
5
Artwork & information
You can select whether to display an artwork and song information or only song information in more detail.
Touching the artwork area switches to the VU meter. (The Disc, USB, SD, iPod, Bluetooth audio sources only)
Change the text size of song information smaller when the "Small Audio Text" is set to "ON" in the User Interface screen ( P.90).
6
Function panel
Touch the left side of the screen to display the function panel. Touch again to close the panel.
7
Operation keys
You can operate the current source with these operation keys. The available functions are different depending on the source type.
19English
Basic Operations

List screen

There are some common function keys in the list screens of most sources. See (P.33, 47, 49, 77).
Display the list screen
For Disc media/ USB/ SD/ iPod:
Touch [1] or the item listed on the
1
information area in the source control screen.
The list screen appears.
For Bluetooth audio:
Touch [1].
1
The list screen appears.
You can use following operation keys from this screen.
5
[ ]/[ ]/[ ]/[ ] Page scroll
You can change pages to display more items by touching [
[
6
Return
Returns to the previous screen.
NOTE
• Depending on the current source or mode, some function key may not appear.
]/[ ].
]/[ ] : Displays the top or bottom page.

Navigation Operation

For details on the navigation function, please refer to the Navigation Instruction Manual.
Display the navigation screen
Press the [NAV]/[ ] button.
61 2
1
DNX997XR
DNX697S / DNX577S
3 4 5
1
Displays the list type selection window.
2
Displays a music/movie file list.
3
Text scroll
Scrolls the displayed text.
4
etc.
Keys with various functions are displayed here.
: Plays all tracks in the folder containing
the current track.
: Jumps to the letter you entered
(alphabetical search).
: Moves to the upper hierarchy
level.
20
The navigation screen appears.
Touch [ ].
2
Main Menu screen appears.
Basic Operations
How to Use the Navigation System
Operate the desired function from the
1
Main Menu screen.
1
2
4
GPS and GLONASS signal status.
1
Finds a destination.
2
Views the map.
3
Uses the Apps such as ecoRoute and Help.
4
Adjusts the settings.
5
NOTE
• GLONASS reception is not available on all device models.
• You can get additional information about using the navigation system from Help. To display Help, touch [Apps] and then touch [Help].
3
5
NOTE
• To enter letters contained in the name, touch the Search bar and enter the letters.
Follow your route to the destination.
3
NOTE
• The speed limit icon feature is for information only and does not replace the driver’s responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin and JVCKENWOOD will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs.
Your route is marked with a magenta line. As you travel, your navigation system guides you to your destination with voice prompts, arrows on the map, and directions at the top of the map. If you depart from the original route, your navigation system recalculates the route.
1
2
3
4
5
NOTE
• For more information about your navigation system, download the latest version of the Owner’s Manual from http://manual.
kenwood.com/edition/im402/
Enter your destination and start the
2
guidance.
Finding points of interest
1 Touch [Where To?]. 2 Select a category and a subcategory. 3 Select a destination. 4 Touch [Go!].
6 8 9
Views the Next Turn page or the junction
1
view page, when available.
Views the Turn List page.
2
Views the Where Am I? page.
3
Stops the currents route.
4
Displays traffic information on the route.
5
Returns to the Main menu.
6
Data field. Touch to display a different data
7
field.
Vehicle speed. Touch to display a trip
8
information.
Displays more options.
9
7
21English
Basic Operations
NOTE
• Touch and drag the map to view a different area of the map.
• A speed limit icon could appear as you travel on major roadways.
● Adding a stop
1 While navigating a route, touch [
then touch [Where To?].
2 Search for the extra stop. 3 Touch [Go!]. 4 Touch [Add to Active Route] to add this
stop before your final destination.
● Taking a detour
1 While navigating a route, touch [ 2 Touch [
].
] and
].
■ Manually avoiding traffic on your route
1 From the map, touch [ ]. 2 Touch [Traffic On Route]. 3 If necessary, touch the arrows to view
other traffic delays on your route.
4 Touch [
] > [Avoid].
■ Viewing the traffic map
The traffic map shows color-coded traffic flow and delays on nearby.
1 From the map, touch [ 2 Touch [Traffic Conditions].
].
2 From the Map Updates section, select
Update
3 Follow the on-screen instructions.
Control audio from the navigation screen
You can control audio sources while the navigation screen is displayed.
Also, you can view the navigation information while the source control screen is displayed.
(P. 19)
While playing the audio, touch [ ]/[
1
]/[ ] in the navigation screen.
Each time you touch the icon, the screen switches as follows.
Displays the navigation and control keys of the current source.
■ About traffic
• Traffic service is not available in some areas or countries.
• Garmin and JVCKENWOOD are not responsible for the accuracy or timeliness of the traffic information.
• You can receive INRIX traffic information and weather forecast by connecting your iPhone or Android smartphone in which the “KENWOOD Traffic Powered By INRIX” application is installed. For details, see “KENWOOD Traffic Powered By INRIX” application.
■ Updating maps
You can purchase updated map data from Garmin.
1 Go to https://kenwood.garmin.com/
kenwood/site.
22
Displays the navigation and current video playback display.
Displays the navigation and view camera display.
Returns to the full navigation screen.
NOTE
• For details on control keys, refer to the instructions in each section.
• Touching the source icon at the bottom of the screen displays the full audio screen. During video playback, touching the viewing area displays operation keys.
• During camera view display, touching the viewing area switches to the view cameras set in the camera assignment settings. (P. 85)
Navigation Setup
Press the [MENU]/[ ] button.
1
Popup menu appears.
Basic Operations
Set each item as follows.
4
[NAV Mute] (2-way speaker system
only)
Mutes the volume of rear speakers during voice guidance of the navigation system. Default is “ON”.
[NAV Interrupt Speaker]
Selects speakers used for voice guidance of the navigation system.
[Front L]: Uses the front left side speaker for voice guidance.
[Front R]: Uses the front right side speaker for voice guidance.
[Front All] (Default): Uses both front speakers for voice guidance.
[NAV Voice Volume]
Adjusts the volume for voice guidance of the navigation system. Default is “24”.
Touch [SETUP].
2
SETUP Menu screen appears.
Touch [Navigation].
3
Navigation Setup screen appears.
23English
Basic Operations
KENWOOD Traffic Powered By INRIX
You can receive INRIX traffic information and weather forecast by connecting your iPhone or Android smartphone in which the “KENWOOD Traffic Powered By INRIX” application is installed to this unit.
Preparation
• Install the latest version of the KENWOOD Traffic Powered By INRIX application on your iPhone or Android smartphone.
– iPhone: Search for "KENWOOD Traffic Powered
By INRIX" in the Apple App Store to find and install the most current version.
– Android: Search for "KENWOOD Traffic Powered
By INRIX" in Google play to find and install the most current version.
• For details, see “KENWOOD Traffic Powered By INRIX” application.
Connect the device.
1
• To connect a device via Bluetooth,
register it as the Bluetooth device and do the App (SPP) profile setting of the connection beforehand. See Register the
Bluetooth device (P.73) and Connect the Bluetooth device (P.74).
• Connect an iPhone using KCA-iP103 via
the USB (Black) terminal. (P. 115)
Press the [NAV]/[ ] button.
2
DNX997XR
DNX697S / DNX577S
The navigation screen appears.
Touch [ ].
3
Main Menu screen appears.
Touch [Apps] on the Main Menu screen and then an icon of your desired content.
For details, see Navigation system manual.
24
NOTE
• When an Apple CarPlay is connected, you can receive INRIX traffic information and weather forecast.

Widget

Widget

Widget
Press the [HOME]/[ ] button.
1
You can change the widget by flicking left
2
or right on the widget area.
Widget list
• Weather Widget *
• Multi Widget *
• Clock Widget
• Tire Pressure Widget *
• Rader Widget *
• Climate Widget *
• Photo Frame Widget
*1 You can receive INRIX traffic information and weather
forecast by connecting your iPhone or Android smartphone in which the “KENWOOD Traffic Powered
By INRIX” application is installed. *2 Up to 3 pages can be set to the multi widget screen. *3 This can be selected when a compatible ADS adapter
is connected.
1
2
3
3
3

Multi Widget

You can place a widget on each of the following areas. Up to 4 widgets can be placed per a multi widget screen.
Press the [HOME]/[ ] button.
1
Flick the widget area to the left/right to
2
display the multi widget.
1
1
Widget (L)
2
Widget (M)
3
Widget (S1)
4
Widget (S2)
Ñ Replace the widget
● To move the widget
Touch and hold the widget.
1
Widget customize mode is activated.
Drag the widget to the desired position.
2
● To delete the widget
Touch and hold the widget.
1
Widget customize mode is activated.
Touch [×] on the right top corner of the
2
widget.
The selected widget is deleted.
2
4
3
25English
Widget
● To replace the widget
Touch [ ] on the multi widget screen.
1
1
Widget list popup appears.
1
Widget icon
The widgets which can be placed to the multi widget screen are listed.
Flick the widget list popup to the left/
2
right to select the widget to replace.
Touch and hold the new widget.
3
Widget customize mode is activated.
Drag the widget from the widget list
4
popup to the desired widget area.
You can set up following items.
• Clock Widget
• Weather Widget *
• NAV Widget
• Compass Widget *
• Current source information *
• Visualizer Widget
• Mirroring Widget *
• Photo Frame Widget
• Climate Widget *
• Radar Widget *
• Tire Pressure Widget *
*1 You can receive INRIX traffic information and weather
forecast by connecting your iPhone or Android
smartphone in which the “KENWOOD Traffic Powered
By INRIX” application is installed. *2 The Turn by Turn function is displayed during the
guidance of the navigation system. *3 You cannot display the screen of Wireless Mirroring
(DNX997XR only)/USB Mirroring on this widget. To
display the screen of the source, select the Mirroring
Widget. *4 This can be selected when using Wireless Mirroring
(DNX997XR only)/USB Mirroring.
1
2
3
4 *5
6
6
6
*5 You cannot play the video file on the USB/SD/Disc
media when using Wireless Mirroring (DNX997XR only)/USB Mirroring.
*6 This can be selected when a compatible ADS adapter
is connected.
NOTE
[ ] and the widget list popup disappear when no operation is done for 5 seconds.
• When the screen is switched from another widget to multi widget screen, [
] appears again.
Ñ Add a new multi widget
You can add pages to the multi widget screen.
Touch [ ] on the multi widget screen.
1
Widget list popup appears.
[ ]
Displays confirmation message to delete the current page from the multi widget screen. For details, see To delete the multi widget (P. 26).
[
]
Adds a page to the multi widget screen.
Touch [ ] on the widget list popup.
2
A new page is added.
NOTE
• You can add up to 2 pages to the multi widget screen. If you have already added 2 pages, you
cannot select [
• The widget list popup is displayed on the new page until you place a widget to.
To delete the multi widget
Touch [ ] on the widget list popup.
1
Confirmation message appears.
Touch [YES].
2
Current page is deleted.
NOTE
• You cannot delete the first page of the multi widget screen.
].
26
Widget

Weather Widget

You can display the weather forecast of the present location on the Home screen.
Preparation
• See KENWOOD Traffic Powered By INRIX (P. 24).
• Select “ON” for Weather Widget. See Widget SETUP (P.28).
Press the [HOME]/[ ] button.
1
Flick the widget area to the left/right to
2
display the weather widget.

Photo Frame Widget

You can display a slideshow of the image files stored in the USB memory/SD card on the Home screen.
Ñ Preparation
• Select “ON” for Photo Frame Widget. See
Widget SETUP (P.28).
● Acceptable Picture files
Max. Picture size
JPEG (.jpg, .jpeg) *15,000 × 5,000
PNG (.png) 1,000 × 1,000
BMP (.bmp) 1,000 × 1,000
• This unit can only play back files which are less than 50 MB.
• The maximum number of files per device is
500.
• Picture files may not be played depending on their condition.
*1 A progressive format is not supported.
Ñ Photo Frame
Press the [HOME]/[ ] button.
1
Flick the widget area to the left/right to
2
display the photo frame widget.
• Scroll the screen to display the hidden part.
27English
Widget

Widget SETUP

Set up the widgets on the Home screen.
Press the [MENU]/[ ] button.
1
Popup menu appears.
Touch [SETUP].
2
SETUP screen appears.
Touch [User Interface].
3
User Interface screen appears.
Touch [Widget SETUP] in the User
4
Interface screen.
Set each item as follows.
5
[Weather Widget]
Determine whether to use the weather widget.
"ON" (Default)/"OFF"
[Photo Frame Widget]
Determine whether to use the photo frame widget.
"ON" (Default)/"OFF"
[Photo Frame SETUP]
Make settings related to display of the photo frame widget.
To Photo Frame Setup
Make settings related to display of the photo frame widget.
Touch [Photo Frame SETUP] on the
1
Widget SETUP screen.
Set each item as follows.
2
[Sort Order]
Specify a file sorting criterion. "By Name(Ascending)"/
"By Name(Descending)"/ "By Date(Newest First)" (Default)/ "By Date(Oldest First)"
[Slide Show Interval]
Specify the slideshow interval. "5" to "30" seconds. Default is "5" seconds.
[Photo Frame is • • • • •]
Display help topics about the photo frame.
Touch [ ].
3
28
Touch [ ].
6

Disc

Disc

Playing a disc

Ñ Insert a disc
DNX997XR
Press the [G] button.
1
Touch [DISC EJECT].
2
The panel opens.
Insert the disc into the slot.
3
The panel closes automatically.
The unit loads the disc and playback starts.
DNX697S / DNX577S
Insert the disc into the slot.
1
Ñ Eject a disc
DNX997XR
Press the [G] button.
1
Touch [DISC EJECT].
2
When removing a disc, pull it horizontally.
Press the [G] button.
3
The panel closes.
NOTE
• To forcibly eject the disc, press and hold the
[G] button for 2 seconds and then touch [DISC EJECT] after the message is displayed.
DNX697S / DNX577S
Press the [ ] button.
1
Popup menu appears.
Touch [ ].
2
When removing a disc, pull it horizontally.
NOTE
• This is not displayed on the popup menu screen
of Apple CarPlay or Android Auto source. Change Apple CarPlay or Android Auto source to other one to display the popup menu screen.
• To forcibly eject the disc, touch and hold [G] for 2
seconds and then touch [Ye s] after the message is displayed.
The unit loads the disc and playback
starts.
29English
Disc

DVD/VCD Basic Operation

Most functions can be controlled from the source control screen and playback screen.
NOTE
• Set the remote control mode switch to DVD mode before starting operation for DVD and VCD, see Switch the operation mode (P.104).
• The screen shot below is for DVD. It may be different from the one for VCD.
When the operation keys are not
1
displayed on the screen, touch 7 area.
Control screen
1
2
3
DVD VCD
2
Video screen
6
7
1
Information display area
Displays the following information.
Title #, Chapter #: DVD title and chapter number
Track #/Scene #: VCD track or scene number. Scene # is displayed only when Playback control (PBC) is on.
Linear PCM, etc.: Audio format
OFF/Zoom24 (DVD)/Zoom2 (VCD): Displays the zoom ratio. This function can be used from the remote control. (P. 104)
[Hide]: Hides the control screen.
[
] : Repeats the current content. Each time you touch the key, repeat modes are switched in the following sequence; DVD: Title repeat ( ), Chapter repeat ( ), Repeat off ( )
VCD (PBC On): Does not repeat VCD (PBC Off ): Track repeat ( ), Repeat off
( )
2
Function panel
Touch the left side of the screen to display the function panel. Touch again to close the panel.
I]: Stops playback. Touching twice will play
the disc from the beginning when you play it next time.
[
] [ ]: Fast-forwards or fast-backward the
4 5
8
6
disc. Each time you touch the key, the speed changes. 2 times, 10 times.
[
] [ ] (DVD only): Plays in slow motion
forward or backward.
[SETUP] (DVD only): Touch to display the DVD SETUP screen. See DVD SETUP (P.34).
[MENU CTRL] (DVD only): Touch to display the DVD-VIDEO disc menu control screen. See DVD Disc Menu Operation (P.33).
[PBC] ( VCD only): Touch to turn Playback control (PBC) on or off.
[Audio] (VCD only): Touch to change audio output channels.
[Direct Number] ( VCD only): Touch to display the Direct Number dialog only when Playback control (PBC) is on. You can directly enter the track number to play when scene is selected.
[
] (VCD only): Returns to the previous scene
only when Playback control (PBC) is on.
3
Play mode indicator/Playing time
D, B, I, etc.: Current play mode indicator Meanings of the icons are as follows: D (play), B (fast forward), A (fast backward),
R
I (stop), playback), (slow reverse playback).
• For confirmation of current playing position. You can drag the circle left or right to change the playing position.
(resume stop), H (pause), (slow
30
Loading...
+ 103 hidden pages