Kenwood DNR8015BTM, DNR8015BT, DNN9150BT, DNN9150BTM User Manual

Download

Page 1

CONNECTED NAVIGATION SYSTEM

DNN9150BT DNN9150BTM

CONNECTED MONITOR WITH DVD RECEIVER

DNR8015BT DNR8015BTM

Quick Start Guide

You can update the system by connecting a USB device containing an update le. For updating the system, visit <http://www.kenwood.com/cs/ce/>.

Page 2

Contents About the Quick Start Guide

About the Quick Start Guide ................................ 2

Precautions ................................................................. 3

Safety Precautions and Important

Information .............................................................. 5

Features of Connected systems .......................... 6

First Step .......................................................................7

Functions of the Buttons

on the Front Panel ............................................... 10

Common Operation ...............................................11

Operation on the Home Screen ........................ 12

How to Use the Navigation System

(DNN9150BT/ DNN9150BTM) ..........................14

How to Play Music ................................................... 16

How to Play Movie .................................................. 17

How to Listen to the Radio ..................................18

How to Make a Phone Call ...................................18

Installation .................................................................20

iPod/ iPhone/ Android setup ............................. 29

About This Unit ........................................................32

This Quick Star t Guide describes basic functions of this unit. For functions not described in this Guide, refer to the Instruction Manual on the following website:

http://manual.kenwood.com/edition/im387/

To refer to the Instruction Manual, a PC loaded with Microsoft® Windows XP/Vista/7/8 or Mac OS X® 10.4 or later is required in addition to Adobe® Reader™ 7.1 or Adobe® Acrobat® 7.1 or later. The Instruction Manual is subject to change for modiﬁcation of speciﬁcations and so forth. Be sure to download the latest edition of the Instruction Manual for reference.

✎ NOTE

• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be diﬀerent from the actual panels.

• In operation procedures, bracket shape indicates the key or button you should control. < >: indicates the name of panel buttons. [ ]: indicates the name of touch keys

2 ñ English

Page 3

Precautions

2WARNING

Ñ To prevent injury or re, take the following

precautions:

• To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.

• Do not watch or ﬁx your eyes on the unit’s display when you are driving for any extended period.

• If you experience problems during installation, consult your Kenwood dealer.

Ñ Precautions on using this unit

• When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area.

• You can select language to display menus, audio ﬁle tags, etc. See Language setup (P.110 ) in the Instruction Manual.

• The Radio Data System or Radio Broadcast Data System feature won’t work where the service is not suppor ted by any broadcasting station.

Ñ Protecting the monitor

To protect the monitor from damage, do not operate the monitor using a ballpoint pen or similar tool with the sharp tip.

Ñ Lens fogging

When you turn on the car heater in cold weather, dew or condensation may form on the lens in the disc player of the unit. Called lens fogging, this condensation on the lens may not allow discs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.

Ñ Precautions on handling discs

• Do not touch the recording sur face of the disc.

• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

• Do not use disc type accessories.

• Clean from the center of the disc and move outward.

• When removing discs from this unit, pull them out horizontally.

• If the disc center hole or outside rim has burrs, use the disc only after removing the burrs with a ballpoint pen etc.

• Discs that are not round cannot be used.

• 8-cm (3 inch) discs cannot be used.

• Discs with coloring on the recording sur face or discs that are dir ty cannot be used.

• This unit can only play the CDs with

. This unit may not correctly play discs which do not have the mark .

• You cannot play a disc that has not been ﬁnalized. (For the ﬁnalization process see your writing software, and your recorder instruction manual.)

Ñ Erase the personal information

Before giving or selling this unit to others, be sure to delete the information (mail, search logs, etc.) stored in this unit by yourself and conﬁrm that the data has been deleted. We shall not be liable for any damage caused by leakage of undeleted data.

1. Press the <HOME> button.

2. Press the <MENU> button.

3. Touch [Setting].

4. Touch [Backup & Reset].

5. Touch [Factory data reset].

6. Enter owner password. Touch [Reset].

7. Touch [ERASE].

English ñ 3

Page 4

Ñ Acquiring GPS signal

HOME 6

(DNN9150BT/ DNN9150BTM)

The ﬁrst time you turn on this unit, you must wait while the system acquires satellite signals for the ﬁrst time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition. After the system acquires satellites for the ﬁrst time, it will acquire satellites quickly each time thereafter.

Ñ About the front panel

When removing the produc t from the box or installing it, the front panel may be positioned at the angle shown in (Fig. 1). This is due to the characteristics of mechanism the product is equipped with. When the product is ﬁrst powered on works properly, the front panel will automatically move into the position (initial set ting angle) shown in (Fig. 2).

Ñ How to reset your unit

If the unit or the connected unit fails to operate properly, reset the unit.

1 Press the <Reset> button.

The unit returns to factor y settings.

DNR8015BT/ DNR8015BTM

✎ NOTE

• Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device connected can damage the data stored in the USB device. For how to disconnect the USB device, see How t o Play Music (P.16).

• When the unit is turned on after resetting, the Initial SETUP screen appears. See Firs t Step (P.7).

(F ig. 1)

(Fig. 2)

Ñ Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a dry sof t cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain oﬀ with a cloth moistened with neutral cleaner, then wipe it again with a clean sof t dry cloth.

! CAUTION

• Applying spray cleaner directly to the unit may aﬀect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erase screened print.

4 ñ English

Page 5

Safety Precautions and Important Information

Read this information carefully before starting to operate the Kenwood Car Navigation System and follow the instructions in this manual. Neither Kenwood nor Garmin shall be liable for problems or accidents resulting from failure to observe the instructions in this manual.

2WARNINGS

Failure to avoid the following potentially hazardous sit uations could result in an accident or collision resulting in death or serious injury.

When navigating, carefully compare information displayed on the navigation system to all available navigation sources, including information from street signs, visual sightings, and maps. For safety, always resolve any discrepancies or questions before continuing navigation. Always operate the vehicle in a safe manner. Do not become distracted by the navigation system while driving, and always be fully aware of all driving conditions. Minimize the amount of time spent viewing the screen of the navigation system while driving, and use voice prompts when possible. Do not enter destinations, change settings, or access any functions requiring prolonged use of the navigation system controls while driving. Stop your vehicle in a safe and legal manner before attempting such operations. Keep the system volume at a low enough level to be able to hear outside noises while driving. If you can no longer hear outside noises, you may be unable to react adequately to the traﬃc situation. This may cause accidents. The navigation system will not display the correct current position of the vehicle the ﬁrst time it is used after purchase, or if the vehicle battery is disconnected. GPS satellite signals will soon be received, however, and the correc t position will be displayed. Be careful of the ambient temperature. Using the navigation system at extreme temperatures can lead to malfunction or damage. Also note that the unit can be damaged by strong vibration, by metal objects, or by water getting inside the unit.

2CAUTIONS

Failure to avoid the following potentially hazardous sit uations may resu lt in injury or property damage.

The navigation system is designed to provide you with route suggestions. It does not reﬂect road closures or road conditions, weather conditions, or other factors that may aﬀect safet y or timing while driving. Use the navigation system only as a navigational aid. Do not attempt to use the navigation system for any purpose requiring precise measurement of direction, distance, location, or topography. The Global Positioning System (GPS) is operated by the United States government, which is solely responsible for its accuracy and maintenance. The government system is subjec t to changes that could aﬀect the accurac y and performance of all GPS equipment, including the navigation system. Although the navigation system is a precision navigation device, any navigation device can be misused or misinterpreted and, therefore, become unsafe.

IMPORTANT INFORMATION

Ñ Vehicle Battery Preservation

This navigation system can be used when the ignition key is turned to ON or ACC. To preserve the battery, however, it should be used with the engine running whenever possible. Using the navigation system for a long time with the engine switched oﬀ can cause the battery to run down.

Ñ Map Data Information

One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. We use a combination of governmental and private data sources, which we identify in product literature and copyright messages displayed to the consumer. Virtually all data sources contain some inaccurate or incomplete data. In some countries, complete and accurate map information is either not available or is prohibitively expensive.

English ñ 5

Page 6

Features of Connected systems

By connecting this unit to Internet, you can use various services.

Ñ Cooperation with Route Collector site

• Destinations and routes speciﬁed on the PC can be input to this navigation system. (DNN9150BT/ DNN9150BTM)

• The routes you have traveled and the songs you have listened to can be logged. (DNN9150BT/ DNN9150BTM)

• By uploading music ﬁles to Dropbox and creating a play list on Route Collector site, you can listen to music anywhere through streaming without music ﬁles on this unit.

• Speech to Text (STT ) and Text to Speech (T TS).

Ñ Use of internet service

• Streaming ser vice such as Aupeo!.

• Internet service such as email, and social networking service such as Facebook and Twitter.

• Information (RSS, etc.) ser vice.

Ñ 4G, 3G, LTE or EDGE

Ñ Wi-Fi access point

• Connect to Internet using the tethering function of your smartphone or an Internet device.

Ñ Wi- Fi (11n /g/b)

Ñ About the account

• To use internet services via this system, you

DNR8015BT/ DNR8015BTM

HOME 6

need to create an account in the Route Collector site.

• In addition to the owner account, you can register up to four user accounts.

• You can use a guest account as well.

• By switching among accounts, you can secure the privacy when using the mail feature or social media.

Ñ Wi-Fi hotspot

• This unit becomes the Wi-Fi access point and you can enjoy music and video in a smartphone Wi-Fi connected by Kenwood Wireless Link.

✎ Notes

• TTS (by Nuance)

• STT (by Nuance) To use the following services, you need to register the corresponding free or paid accounts.

• Aupeo!

• Facebook

• Twi tte r

• Dropbox

6 ñ English

Page 7

First Step

Power on the unit and perform some setup steps before using.

1 Press the <8HOME> button.

2 Touch the corresponding key and set the

item.

DNR8015BT/ DNR8015BTM

HOME 6

The unit is turned on.

⿠To turn o the unit:

Press the <8HOME> button for 1 second.

✎ NOTE

• “Initial setup” also appears when the unit is reset.

Language Setup

Select the language used for the GUI and input methods. Default is “English (United States)”.

1) Touch [Language Setup].

2) Select a language from the list.

WiFi Setup

Conﬁgure settings for connection to Wi-Fi.

1) Touch [Wiﬁ Setup].

2) Slide Wi-Fi to ON.

3) Touch [Wi-Fi].

4) Select the Wi-Fi access point to register from the list.

5) Enter the Password.

6) Touch [Connect].

After set ting, press the < 6 > button.

Date Setup

Set the date and time.

1) Touch [Date Setup].

2) Touch [Selec t time zone]. (DNR8015BT/ DNR8015BTM only)

3) Select a time zone.

After set ting, press the < 6 > button.

Account Setup

Set the information about the user of this unit.

1) Touch [Account Setup].

See Types of ac counts, Create User Account and Set Owner Account.

English ñ 7

Page 8

⿠Types of accounts

Administrator

As Administrator, you can create an owner account and perform initial setup.

You can log in to the system if you have not created an owner account.

Guest

An account for guests such as your friends.

The guest can operate this unit, but cannot use the functions related to mail, social media, and Route Collector site.

Owner

The account for the person who manages this unit.

The owner can use the func tions related to mail, social media, and Route Collector site.

You can register users such as your family.

User

The account for the user of this unit.

The user can use the functions related to mail, social media, and Route Collector site.

You can register up to 4 user accounts.

⿠Create User Account

✎ Preparation

• To register yourself in the Route Collector site as a user, you need a mail address.

• You can register yourself via the Web. http://www.route-collector.com/

• This step may be skipped if you have already registered yourself in the Route Collector site.

1) Touch [Create Account].

2) Enter account information. You cannot register an account which has already been used. Register another account name.

3) Touch [OK]. The account is temporarily registered in the Route Collector site.

4) Activate the account. A conﬁrmation mail is sent to the registered mail address. Open the indicated URL to complete account registration.

⿠Set Owner Account

1) Touch [Set Owner Account].

2) Enter account information. Enter the information registered in the Route Collector site.

3) Touch [OK].

3 Touc h [Nex t]. 4 Touch the corresponding key and set the

item.

Locale (DNN9150BT/ DNN9150BTM)

Select the country for the navigation system. The language, the distance unit, and the gasoline unit are set.

Language

Select the language used for the control screen and setting items. Default is “American English (en)”.

After set ting, touch [Enter].

Angle

Adjust the position of the monitor. Default is “0”.

After set ting, touch [

Color

Set the screen and button illumination color. You can select whether to perform color scan and adjust scanning color.

After set ting, touch [

Camera

Set the parameters for the camera.

After set ting, touch [

DEMO

Set the demonstration mode. Default is “ON”.

8 ñ English

Page 9

5 Touch [Finish].

✎ NOTE

• For details on operations of each setting, refer to the Instruction Manual.

6 Touch [Administrator] or [Owner].

Ñ How to prepare the remote control

Insert two “AAA”/“R03”-size batteries with the and

poles aligned properly, following the illustration

inside the case.

! CAUTION

• Put the remote controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the remote controller falls down and gets wedged under the pedals while driving.

• Do not leave the battery near re or under direct sunlight. A re, explosion or excessive heat generation may result.

• Do not recharge, short, break up or heat the batter y or place it in an open re. Such actions may cause the battery to leak uid. If spilled uid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.

• Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a physician.

English ñ 9

Page 10

Functions of the Buttons on the Front Panel

DNR8015BT/ DNR8015BTM

HOME 6

1 4 5 6 7 82 3

No. Name/ Motion

s (Reset)

• If the unit or the connected unit fails to operate properly, the unit returns to initial settings when this button is pressed (Instruction Manual P.135).

• If the SI function is turned on, this indicator ﬂashes when the vehicle ignition is oﬀ (Instruction Manual P.111).

R, S (Vol)

• Adjusts volume.

Remote Sensor

• Receives the remote control signal.

NAV (DNN9150BT/ DNN9150BTM)

• Displays the navigation screen.

• Pressing for 1 second turns the screen oﬀ.*

APPS (DNR8015BT/ DNR8015BTM)

• Displays the APPS screen.

• Pressing for 1 second turns the screen oﬀ.*

• Displays the option menu screen.

• Pressing for 1 second switches AV out sources.

No. Name/ Motion

HOME

• Displays the Home screen (P.12).

• Pressing for 1 second turns the power oﬀ.

• When the power oﬀ, turns the power on.

6 (Back)

• Return to the previously viewed screen.

• Pressing for 1 second displays the Hands

G (Eject)

• Ejects the disc.

• When the panel is opened, pressing

• When the panel is closed, pressing for

Disc insert slot

• A slot to inser t a disc media.

SD card slo t (DNN9150BT/ DNN9150BTM)

• An SD card slot for upgrading the map.

* The functio n of the [NAV]/ [APPS] but ton can be changed to

camera vi ew function. (Instruction Manual P.109)

Free screen (Instruction Manual P.100).

closes the panel and pressing for 1 second ejects the disc forcibly.

1 second fully opens the panel to the location of the SD card slot. (DNN9150BT/ DNN9150BTM)

For how to upgrade the map, refer to the instruction manual of the navigation system.

10 ñ English

Page 11

Ñ How to insert an SD card

(DNN9150BT/ DNN9150BTM)

1) Press

2) Hold the SD card as the illustration in the

G> button for 1 second.

The panel fully opens.

right and inser t it into the slot until it clicks.

⿠To eject the card:

Push the card until it clicks and then remove your ﬁnger from the card. The card pops up so that you can pull it out with your ﬁngers.

Labelled side

Common Operation

Ñ General

There are some functions which can be operated from most screens.

Ñ List screen

There are some common function keys in the list screens of most sources.

(Scroll)

etc.

Touch to scroll through tex ts on the display.

Touch keys with various functions are displayed here. Displayed keys diﬀer depending on the current audio source, status, etc. For examples, see Lis t screen (P.22) in the Instruction Manual.

Ñ Flick scrolling

You can scroll the list screen by icking the screen up/down or right/left.

(Mixed Media Search)

Touch to display the Mixed Media Search screen.

(Quic k menu)

Touch to display the quick menu. The content of the menu are as follows.

: Displays the SETUP Menu screen. : Displays the Audio Control Menu screen. : Displays the control screen of current source.

Icon feature diﬀers depending on the source.

(RETURN)

Returns to previous screen.

English ñ 11

Page 12

Login

Operation on the Home Screen

1 Press the <HOME> button to turn the

power on.

2 Select the login user. 3 Enter the password.

(Password)

Enter the registered password.

If you selec ted Administrator or Guest, this screen is not displayed.

[Auto Login?]

Checking this checkbox allows you to log in to the system automatically from the next time.

[Login]

✎ NOTE

• If you forgot your password, create your new password on the Route Collector site. http://www.route-collector.com/

1 Press the <HOME> button to display the

Home screen.

2 Flick the screen left or right to select

the Service panel, Media panel, Source launcher panel, or Network contents panel.

1 Service panel

Network widget: Displays the SNS, or RSS.

2 Media panel

Now playing: Displays the title of the song being played or the name of the station you are listening to, and allows you to perform simple operations.

Photo Frame Widget: Displays the Photo frame that shows photos.

3 Source launcher panel

Allows you select a source.

4 Network contents panel

Allows you to select a network-related application.

12 ñ English

Page 13

Ñ Source launcher panel

⿠Adding of a shortcut icon to Source

launcher panel

(Shortcut icon)

You can register sources you use frequently so that you can start them quickly.

(All source list)

Displays all sources.

⿠All source list

(All source list)

You can scroll the list screen by ﬂicking the screen up/d own.

(Home)

Returns to the Source launcher panel.

⿠Moving or deleting of an icon on the Source launcher panel

1) Touch [ ] in Source launcher panel.

2) Touching the icon continuously to display the Source launcher panel screen.

3) Drag the icon to an empt y space.

1) Touch and hold the icon.

2) Drag the icon to the desired position or Recycle Bin.

English ñ 13

Page 14

How to Use the

689

Navigation System (DNN9150BT/ DNN9150BTM)

1 Press the <NAV> button to display the

navigation screen.

2 Operate the desired function from the

Main Menu screen.

GPS satellite strength.

Finds a destination.

Views the map.

Uses the Apps such as ecoRoute and Help.

Adjusts the settings.

✎ NOTE

• You can get additional information about using the navigation system from Help. To display Help, touch [Apps] and then touch [Help].

⿠Finding points of interest

1) Touch [ Where To?] .

2) Select a category and a subcategory.

3) Select a destination.

4) To uc h [Go!].

✎ NOTE

• To enter letters contained in the name, touch the Search bar and enter the letters.

4 Follow your route to the destination.

✎ NOTICE

• The speed limit icon feature is for information only and does not replace the driver ’s responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin and JVC KENWOOD will not be responsible for any trac nes or citations that you may receive for failing to follow all applicable trac laws and signs.

Your route is marked with a magenta line. As you travel, your navigation system guides you to your destination with voice prompts, arrows on the map, and directions at the top of the map. If you depart from the original route, your navigation system recalculates the route.

• For more information about your navigation system, download the latest version of the Owner’s Manual from manual.kenwood.com/edition/im387

3 Enter your destination and start the

guidance.

14 ñ English

Views the Next Turn page or the junction view page, when available.

Views the Turn List page.

Views the Where Am I? page.

Stops the currents route.

Displays traﬃc information on the route.

Returns to the Main Menu.

Page 15

Displays a diﬀerent data ﬁeld.

Views the Trip Computer.

Displays more options.

✎ NOTE

• Touch and drag the map to view a diﬀerent area of the map.

• A speed limit icon could appear as you travel on major roadways.

⿠Adding a stop

1) While navigating a route, touch [ ] and then touch [Where To?].

2) Search for the extra stop.

3) To uch [Go !] .

4) Touch [Add to Active Route] to add this stop before your ﬁnal destination.

⿠Taking a detour

1) While navigating a route, touch [ ].

2) Touch [

Ñ Other Features

⿠Manually avoiding trac on your route

(region code 3 area only)

1) From the map, touch the traﬃc icon.

2) Touch [Traﬃc On Route].

3) If necessary, touch the arrows to view other traﬃc delays on your route.

4) Touch [

] > [Avoid].

⿠Viewing the trac map (region code 3 area only)

1) The traﬃc map shows color-coded traﬃc ﬂow and delays on nearby.

⿠About trac (region code 3 area only)

✎ NOTICE

• Trac service is not available in some areas or countries.

• Garmin and JVC KENWOOD are not responsible for the accuracy or timeliness of the trac information.

• Your navigation system can receive trac information using the built-in trac receiver. The trac receiver must be in data range of a station transmitting trac data to receive trac information. The trac subscription activates automatically after your navigation system acquires satellite signals while receiving trac signals from the service provider.

⿠Updating the software

To update the navigation system sof tware, you must have an SD card, a USB mass storage device and an internet connection.

1) Go to ww w.garmin.com/kenwood.

2) Find your model and select [Software Updates] > [Download].

3) Read and accept the terms of the Software License Agreement.

4) Follow the instructions on the Web site to complete the installation of the soft ware update.

⿠Updating maps

You can purchase updated map data from Garmin or ask your Kenwood dealer or Kenwood service center for details.

1) Go to ww w.garmin.com/kenwood.

2) Select [Order Map Updates] for your Kenwood unit.

3) Follow the Web site instructions to update your map.

English ñ 15

Page 16

How to Play Music

You can play audio les from music CD, disc media, USB storage device and iPod.

✎ NOTE

• For details on playable ﬁle format, media format, iPod model, etc., refer to the Instruction Manual.

(P.136 )

• To connect with iPod/iPhone/Android the set ting is necessar y. Refer to

(P.29).

iPod/ i Phone/ Andr oid setup

1 Connect the media you want to play as

shown below.

Disc

1) Press the <G> button to open the front

panel.

2) Inser t the disc into the slot. The panel closes automatically and playback starts.

⿠To eject the disc:

1) Press the <G> button.

iPod, USB device

1) Connect the device with each cable. Playback starts.

2 Control the music you are listening to on

the source control screen.

The following symbols indicate the keys on the screen. The functions of the keys are the same despite the diﬀerence of the source you are listening to.

Touch [ ]

⿠Basic operations from this screen

Plays or pauses.

Stops playing.

Disconnects the device.

E F

Searches the previous/next content.

A B or move the cursor in the center bar

Fast forwards or Fast backwards (Disc media, CD, USB device only):

Repeats current content.

⿠To disconnect the device:

1) Touch [G] on the screen and disconnect the device from the cable.

✎ NOTE

• It applies when you set the iPod/iPhone connection with cable.

16 ñ English

Plays all contents in random order.

✎ NOTE

• For other operations, refer to the Instruction Manual.

• If desired key is not displayed in the multi-function bar, touch the [

] to switch the menu.

3 Search the track/le you want to listen to.

⿠List search

1) Touch center of the screen. The content list of the media being played is displayed. If the information of the current track only is displayed, touch [ displa y.

] to switch the list

Page 17

⿠Rened search

1) Touch [ ].

2) Touch the desired reﬁnement method. The list is reﬁned by the item you selected.

3) Touch the desired item.

✎ NOTE

• For details on searching operations, refer to Search Operation (P.66) in the Instruction Manual.

How to Play Movie

You can play DVD video, Video CD ( VCD), movie les from disc media, iPod and USB storage device.

✎ NOTE

• For details on playable ﬁle format, device format, etc., refer to the Instruction Manual.

1 Connect the media you want to play.

For the method of connecting, see H ow to Play Music (P.16).

2 Control the movie by touching the

screen.

Each area on the screen has a separate function.

No. Name/Motion

Displays the movie control screen.

Displays the Source Control screen.

• Searches the next /previous content or ﬁle.

• Scrolling from center of display to left or right per forms fast backward or fast forward. To stop fast backward/for ward, touch center of the display.*

• *1 For iPod/USB, this function may be unavailable depending on the playing ﬁle format.

✎ NOTE

• For operations on the source control screen, see

How to Play M usic (P.16). However, searching by category/link/album ar twork is not available.

English ñ 17

Page 18

How to Listen to the Radio

1 Press the <HOME> button twice to the

Source launcher panel.

2 Touch [ ] in the Source launcher panel. 3 Touch [TUNER].

The unit switches to the Radio tuner source.

4 Operate on the source control screen.

⿠Station search

1) Touch [ ]. Sub function menu appears.

2) Touch [AM] or [FM] to select the band.)

3) To uch [A ] or [B] to tune in the desired station.

⿠Auto memory

1) Touch [ ]. Sub function menu appears.

2) Touch [AM] or [FM] to select the band.

3) Touch [

4) To uc h [AME].

5) Tou ch [A] or [B] in the sub function menu. Auto memory starts.

⿠Recalling the preset station

1) Touch [P#]. You can also display the preset list by touching the frequency display in the center.

✎ NOTE

• For other operations, see Radio Basic Operation (P.86) in the Instruction Manual.

How to Make a Phone Call

You can use your Bluetooth cell-phone when paired to this unit.

1 Register your cell-phone to the unit.

Follow as the procedures shown below. For detailed operation, see Regi stering the Bluetooth Unit (P.97) in the Instruction Manual.

1) Press the <HOME> button t wice to the Source launcher panel.

2) Touch [

3) Touch [STANDBY].

4) Press and hold the < 6 > button.

5) Touch [

6) Touch [Search]. Searched Device List screen appears.

7) Select your cell-phone from the displayed list in the Searched Device List screen.

8) Enter PIN code form the cell-phone. Registering is completed. The PIN code is set to “0000” as default.

] in the Source launcher panel.

2 Connect your cell-phone to the unit.

1) Touch the device name you want to connect in the Bluetooth SETUP screen.

2) Touch [ON] of [ TEL(HFP)] in the BT Connection Settings screen. The selected device is connected to the unit.

18 ñ English

Page 19

Call by voice

You can make a voice call using the voice recognition function of the cell-phone.

1) Touch [

2) Pronounce the name registered in the cellphone.

When registration of your cell-phone is completed, the phone book of the cellphone is automatically downloaded to this unit.

✎ NOTE

• Touch [Audio(A2DP)] if you want to connect the device as an audio player.

3 Make or receive a phone call.

See the table below for each operation method.

Call by entering a phone number

1) Touch [

2) Enter a phone number with number keys.

3) Touch [

Call using call records

1) Touch [ Calls), or [

2) Select the phone number from the list.

3) Touch [

Call using the phonebook

1) Touch [

2) Select the name from the list.

3) Select the number from the list.

4) Touch [

Call using the preset number

1) Touch [Preset #] to start calling the corresponding phone number.

] (Incoming Calls), [ ] (Outgoing

] (Missed Calls).

✎ NOTE

• For detailed operation, see Us ing Hands-Fr ee Feature (P.100) in the Instruction Manual.

English ñ 19

Page 20

Installation

Ñ Before Installation

Before installation of this unit, please note the following precautions.

! WARNINGS

• If you connect the ignition wire (red) and the batter y wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a re. Always connect those wires to the power source running through the fuse box.

• Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must be connec ted to the wires via the fuse.

! CAUTION

• Install this unit in th e console of your vehicle. Do not touch the metal part of this unit during and shortly after the use of the unit. Metal part such as the heat sink and enclosure become hot.

✎ NOTES

• Mounting and wiring this product requires skills and experience. For best safety, leave the mounting and wiring work to professionals.

• Make sure to ground the unit to a negative 12V DC power supply.

• Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidit y. Also avoid places with too much dust or the possibility of water splashing.

• Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.

• If the power is not turned ON (“PROTECT” is displayed), the speaker wire may have a shortcircuit or touched the chassis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked.

• If your car’s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and oﬀ with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, such as with battery wires, the batter y may be drained.

• If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening.

• If the fuse blows, ﬁrst make sure the wires aren’t

touching to cause a short circuit, then replace the old fuse with one with the same rating.

• Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals.

• Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the ¤ wires or ground them to any metal part in the car.

• When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connec t the ¢ connector of the left speaker to a front output terminal, do not connect the ¤ connector to a rear output terminal.

• After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.

• Mount the unit so that the mounting angle is 30° or less.

• This unit has the cooling fan (P. 24) to decrease the internal temperature. Do not mount the unit in a place where the cooling fan of the unit is blocked. Blocking these openings will inhibit the cooling of the internal temperature and result in malfunction.

• Do not press hard on the panel surface when installing the unit to the vehicle. Other wise scars, damage, or failure may result.

• Reception may drop if there are metal objects near the Bluetooth antenna and WI-FI receiver.

Bluetooth antenna area

M4 x 8mmMAX

iPod/ AV-IN2

REMO

POWER

5V=500mA

FUSE 10A

WiFi

Recever

WI-FI receiver

• Install the WI-FI receiver besides the place enclosed by the metal.

20 ñ English

Page 21

Ñ Supplied accessories

First of all, make sure that all accessories are supplied with the unit.

1 ...1 7 *1 ...1

2 ...1 8 *1 ...1

(2 m)

3 ...2 9 ...1

4 ...6 0 ...1

(M5x6m m)

5 ...6 - ...1

(M5x7m m)

6 ...1

*1 DNN9150BT/

DNN9150BTM only

(3.5 m)

(3 m)

Ñ Unit

1) To prevent a short circuit, remove the key from

the ignition and disconnec t the ¤ terminal of the battery.

2) Make the proper input and output wire connections for each unit.

3) Connect the speaker wires of the wiring harness.

4) Connect the wiring harness wires in the following order; ground, battery, ignition.

5) Connec t the wiring harness connector to the unit.

6) Install the unit in your car.

7) Reconnect the ¤ terminal of the bat tery.

8) Press the <Reset> button. (P. 4)

9) Perform the Initial Setup. See Firs t Step (P.7).

⿠Non-Japanese cars

Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

⿠Japanese cars

4 or 5

Car Bracket

4 or 5

✎ NOTE

• Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip).

English ñ 21

Page 22

Ñ Trim p late

1) Attach accessory 6 to the unit.

Ñ GPS antenna (DNN9150BT/ DNN9150BTM)

GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle:

1) Clean your dashboard or other surface.

2) Remove the separator of the metal plate

(accessory 8).

3) Press the metal plate (accessory 8) down ﬁrmly

on your dashboard or other mounting surface. You can bend the metal plate (accessory 8) to conform to a curved surface, if necessary.

4) Remove the separator of the GPS antenna

(accessory 7), and stick the antenna to the metal plate (accessory 8).

• Painting the GPS antenna with (metallic) paint may cause a drop in performance.

Ñ Microphone unit

1) Check the installation position of the

microphone (accessory 9).

2) Clean the installation surface.

3) Install the microphone.

4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method.

Fix a cable with a commercial item of tape.

Remove the separator of the microphone, and stick the microphone to the place shown above.

✎ NOTE

• Depending on the type of car, reception of the GPS satellite signals might not be possible with an inside installation.

• Please install this GPS antenna in an area away from any antennas that are used with CB radios or satellite televisions.

• The GPS antenna should be installed at a position that is spaced at least 12 inch (30 cm) from cellular phone or other transmitting antennas. Signals from the GPS satellite may b e interfered with by these types of communication.

22 ñ English

Adjust the direction of the microphone to the driver.

✎ NOTE

• Install the microphone as far as possible from the cell-phone.

Page 23

Ñ Removing the trim plate

1) Engage the catch pins on the extraction key

(accessory3) and remove the two locks on the lower level. Lower the trim plate (accessory6) and pull it forward as shown in the ﬁgure.

Ñ Removing the unit

1) Remove the trim plate by referring to ste p 1 in “Remov ing the trim pla te”.

2) Inser t the two extrac tion key (accessory3) deeply into the slots on each side, as shown.

Lock

Catch

✎ NOTE

• The trim plate can be removed from the top side in the same manner.

2) When the lower level is removed, remove the upper two locations.

3) Lower the extraction key toward the bottom, and pull out the unit halfway while pressing towards the inside.

✎ NOTE

• Be careful to avoid injury from the catch pins on the extraction key.

4) Pull the unit all the way out with your hands, being careful not to drop it.

English ñ 23

Page 24

Ñ Connecting wires to terminals

HDMI/MHL

Ignition key switch

ACC

Car fuse box (Main fuse)

Car fuse box

Battery

eering remote

To use the steering wheel remote control

feature, you need an exclusive remote adapter

(not supplied) matched to your car.

To st

To car light control switch

Connec

t to the terminal that is grounded

when either the telephone rings or during

To use the Mute feature, you need to hook

up this wire to your telephone by using a

commercial telephone accessory.

Depending on what antenna you are using,

connect either to the control terminal of the

motor antenna, or to the power terminal for the

of the film-type antenna. (Max. 300mA, 12V)

When using the optional pow

connect to its power control terminal.

conversation.

booster amplifier

er amplifier,

M4 x 8mmMAX

AV-OUT AUDIO

AV-IN/OUT

R L

GPS

SW FRONT REAR

MIC

iPod/

AV-IN2

Accessory 1

Red (Ignition wire)

Yellow (Battery wire)

Black (Ground wire) ¤ (To car chassis)

Light Blue/Yellow (Steering remote control wire)

REMOTE

STEERING

CONT

WHEEL

REMOTE

INPUT

Orange/Whit contr

ol wire)

e (Dimmer

ILLUMI

Brown (Mute control wire)

MUTE

Blue (Antenna control wire)

ANT CONT

Blue/Whit

ower control wire)

P. CONT

If no connections are made, do not let the cable come out from the tab.

REMO

POWER

FUSE 10A

Speaker impedance: 4-8 Ω

White/Black

To front left speaker

White

Gray/Black

Gray

Green/Black

Green

To front right speaker

To rear left speaker

Purple/Black

To rear right

Purple

speaker

24 ñ English

Page 25

Ñ System connection

Accessory 9: Bluetooth Microphone

cessory 7: GPS Antenna

Ac (DNN9150BT/ DNN9150BTM only)

FM/AM antenna input

Accessory 0

HDMI/MHL

MIC

AV-IN/OUT

AV-OUT AUDIO

SW FRONT REAR

R L

AV-OUT Output

- Audio Output

AV-OUT Output

- Visual Output

AV-IN1 input

- Yellow (Visual input)

- Red (Audio Right input)

- White (Audio Left input)

Rear view camera input

GPS

Cooling fan

(0.8 m)

WiFi

Receiver

5V=500mA

M4 x 8mmMAX

iPod/

AV-IN2

REMO

POWER

FUSE 10A

Fuse (10A)

Accessory 2

Light Green (Parking sensor wire)

PRK SW

For best safety, be sure to connect the parking sensor.

Purple/White (Reverse sensor wire)

REVERSE

Connect to vehicle’s reverse lamp harness when using the optional rear view camera.

WI-FI receiver

- Reception may drop if there are metal objects near the Bluetooth antenna and WI-FI receiver.

- Install the WI-FI receiver besides the place enclosed by the metal.

Connect to the vehicle’s parking brake detection switch harness.

CAMERA

FRONT VIEW

Green/Red

Green/White

Front view camera input

To CMOS-3xx series (Optional Accessory) camera control terminal

English ñ 25

Page 26

Ñ 3 way speaker system setup

Region code 3 area

Connect the speaker wires

HDMI/MHL

AV-IN/OUT

GPS

MIC

iPod/

AV-IN2

M4 x 8mmMAX

AV-OUT AUDIO

SW FRONT REAR

R L

Subwoofer Preout

- Red (Audio Right Output)

- White (Audio Left Output)

Mid Range Preout

- Red (Audio Right Output)

- White (Audio Left Output)

Tweeter Preout

- Red (Audio Right Output)

- White (Audio Left Output)

Preout

RCA Cable (sold separately)

Power amplifier (optional accessory)

Speaker

Input

When connecting to an external amplifier, connect its ground wire to the car's chassis to avoid damaging the unit.

REMO

POWER

FUSE 10A

Accessory 1

Speaker impedance: 4-8 Ω

White/Black

To mid range left

White

speaker

Gray/Black

To mid range right

Gray

Green/Black

Green

Purple/Black

Purple

speaker

To tweeter left speaker

To tweeter right speaker

26 ñ English

NOTE

• For how to connect speaker wires to terminals other than speaker terminals and Preout terminals, see Connec ting wires to ter minals (P. 24) and System connection (P.25).

Page 27

Switching between speaker systems

Switch to the 3 way speaker system following the procedure below.

• Be sure to set the speaker network correc tly. Connecting 3 way speakers with the 2 way mode selected can break the speakers.

1 Press the <HOME> button twice to the

Source launcher panel.

2 Touch [ ] in the Source launcher

panel.

3 Touch [STANDBY]. 4 Press the <∞> button and <0> button

for 1 second at the same time.

Speaker system select screen appears.

DNR8015BT/ DNR8015BTM

HOME 6

6 Touc h [Ye s].

The 2 way speaker system is switched to the 3 way speaker system.

✎ NOTE

• When the 3-way speaker system is selected, the following functions are disabled. (See the Instruction Manual.)

- Zo ne Control (P.126)

- DS P select (P.122)

- Fader of Co ntrolling G eneral Audio (P.122 )

• For speaker setup and crossover setup, see Set ting Aud io (P.118 ) in the Instruction Manual.

5 Touc h [3wa y].

A conﬁrmation screen appears.

English ñ 27

Page 28

Ñ Optional accessory connection

AV-IN/OUT

MIC

GPS

AV-OUT AUDIO

SW FRONT REAR

R L

POWER

FUSE 10A

REMO

M4 x 8mmMAX

iPod/

AV-IN2

HDMI/MHL

AV-IN/OUT

MIC

AV-OUT

AUDIO

SW FRONT REAR

R L

POWER

FUSE 10A

REMO

M4 x 8mmMAX

iPod/ AV-IN2

HDMI/MHL

USB

iPod/

iPhone

1 2

6 65 5

iPod/

iPhone

1 2

DNN9150BT/ DNN9150BTM

USB device (sold separately)

HDMI/ MHL input MHL maximum power supply current : 5 V

900 mA

When you connect the cable to HDMI/MHL terminal, remove the fixture. After connecting the cable, put the fixture again.

iPod input / AV-IN2 (CA-C3AV; Optional Accessory) input (iPod/ AV-IN2 switchable)

iPod/ USB terminal (0.8m) iPod/ USB maximum power supply current : 5 V

USB terminal (0.8m) (DNN9150BT/ DNN9150BTM only) USB maximum power supply current : 5 V

1 A

500 mA

28 ñ English

DNR8015BT/ DNR8015BTM

HDMI/ MHL con nector

Fixture

When connecting to an external amplifier, connect its ground wire to the car's chassis to avoid damaging the unit.

Android smartphone (sold separately)

KCA-MH100 (1.8m) (Optional Accessory)

Rear Preout

- Red (Audio Right Output)

- White (Audio Left Output)

Front Preout

- Red (Audio Right Output)

- White (Audio Left Output)

SW FRONT REAR

R L

Accessory - Steering remote harness

Connect to vehicle's steering remote harness. Contact your Kenwood dealer for details.

Subwoofer Preout

- Red (Audio Right Output)

- White (Audio Left Output)

Page 29

iPod/iPhone

(sold separately)

KCA-iP103 (0.8m)

Optional Accessory)

(

Music

Video and Music (HDMI)

KCA-HD100 (1.8m) (Optional Accessory)

KCA-iP103 (0.8m) (Charging) (Optional Accessory)

USB terminal (0.8m)

Music

Video and Music (analog)

AV Output (1.8m)

USB terminal (0.8m)

NOTE

• For the connec tion and the setti ng of iPod/iPhone re fer to iPod/iPhone connection and setting (P.29).

• For the connec tion and the setti ng of Android smartp hone refer to Android connection (P.29).

Lightning Digital AV

(sold separately)

KCA-iP102

(Optional Accessory)

Adapter

iPod

KCA-iP202

iPod/ iPhone/ Android setup

Ñ Android connection

To connect the Android device with this unit, the cable (sold separately) and the prole which your Android device supports are necessary as follows:

⿠ To listen to music and watch video of APPS

source

– MHL device – KCA- MH100 – Bluetooth proﬁle: SPP – Application link setup: HDMI/MHL + BT

(P. 31)

⿠ To listen to music of APPS source

– Bluetooth proﬁle: A2DP – Bluetooth proﬁle: SPP – Application link setup: Bluetooth ( P.31)

⿠ To listen to music of Bluetooth Audio source

– Bluetooth proﬁle: A2DP – Bluetooth proﬁle: AVRCP

✎ NOTE

• When you select Pandora source the setting of Application link setup (P. 31) is also necessary.

• In the APPS source, some functions can be controlled from this unit and they depend on the applications. Refer to Apps Operation (P.74) in the Instruction Manual.

• Do not leave the cable or the adapter made by other makers inside the car. It might lead the malfunction caused by heat.

Ñ iPod/iPhone connection and setting

⿠Connectable iPod/iPhone

The following models can be connected to this unit.

Made for

• iPhone 5s

• iPhone 5c

• iPhone 5

• iPhone 4S

• iPhone 4

• iPhone 3GS

• iPhone 3G

• iPhone

• iPod touch (5th generation)

• iPod touch (4th generation)

• iPod touch (3rd generation)

English ñ 29

Page 30

• iPod touch (2nd generation)

• iPod touch (1st generation)

• iPod classic

• iPod with video

• iPod nano (7th generation)

• iPod nano (6th generation)

• iPod nano (5th generation)

• iPod nano (4th generation)

• iPod nano (3rd generation)

⿠iPod/iPhone connection

To connect the iPod/iPhone with this unit, the cable, adapter (both sold separately), and the prole which your iPod/iPhone supports are necessary as follows:

⿠ To listen music and watch video with

Lightning connector device

– Lightning Digital AV Adapter – KCA-HD100 – KCA- iP103 – Bluetooth proﬁle: SPP – iPod connection setup: HDMI + BT ( P.30)

⿠ To listen music with Lightning connector

device

– KCA- iP103 – iPod connection setup: USB 1Wire (P.30)

⿠ To listen music and watch video with 30- pin

connector device (analog)

– KCA-iP202 – iPod connection setup: USB+AV-IN (P. 30)

⿠ To listen music with 30-pin connector device

– KCA- iP102 – iPod connection setup: USB 1Wire (P.30)

⿠ To listen to music via Bluetooth

– Bluetooth proﬁle: A2DP – Bluetooth proﬁle: SPP – iPod connection setup: Bluetooth (P.30)

⿠ To listen to music of Bluetooth Audio source

– Bluetooth proﬁle: A2DP – Bluetooth proﬁle: AVRCP

✎ NOTE

• When you select Pandora source the setting of Application link setup (P. 31) is also necessary.

• In the APPS source, some functions can be controlled from this unit and they depend on the applications. Refer to Apps Operation (P.74) in the Instruction Manual. For the setting refer to Application link setup (P. 31).

• Do not leave the cable or the adapter made by

other makers inside the car. It might lead the malfunction caused by heat.

⿠iPod/iPhone connection setup

When you rst selec t iPod as a source, the setting screen of the iPod/iPhone connection will appear.

1 Press the <HOME> button twice to the

Source launcher panel.

2 Touch [ ] in the Source launcher

panel.

3 Touch [iPod].

iPod connection setup screen appears.

4 Touc h [CHANGE ]. 5 Set each item as follows.

USB + AV-IN

Select when connec ting with KCA-iP202.

USB 1Wire

Select when connec ting with KCA-iP103 or KCAiP102 .

HDMI + BT

Select when connec ting with KCA-HD100 and Lightning Digital AV Adapter.

Bluetooth

Select when connec ting via Bluetooth only.

6 Touc h [Next].

Conﬁrmation screen appears.

30 ñ English

Page 31

7 Touch [Done].

✎ NOTE

• When you select “HDMI + BT” or “Bluetooth” in step 5, Bluetooth device selection screen will appear. Select the iPod/iPhone to be connected.

If a connectable Bluetooth device is not displayed, touch [Search] and do the pairing of the devices.

• “iPod connection setup” also appears when the unit is reset.

• The set ting of “iPod connection setup” is just for the unit and regardless of the account.

Ñ Application link setup

When you rst selec t Apps as a source, the setting screen for the connec tion with the device installed the apps will appear.

1 Press the <HOME> button twice to the

Source launcher panel.

2 Touch [ ] in the Source launcher

panel.

5 Select the device installed the apps.

6 Select the way to connect the device with

this unit. ⿠When selecting [iPod/iPhone]

For the setting items refer to iPod/iPhone connection setup (P.30).

⿠When selecting [Android/Other]

3 Touch [APPS].

Application link setup screen appears.

4 Touc h [CHANGE ].

HDMI/MHL + BT

Select when connec ting with KCA-MH100.

Bluetooth

Select when connec ting via Bluetooth only.

7 Touc h [Next].

Conﬁrmation screen appears.

8 Touch [Done].

English ñ 31

Page 32

✎ NOTE

• For the details of the necessary cable and adapter to connect with iPod/iPhone and Android, refer to iPod/iPhone connection and setting (P.29) and Android connection (P.29).

• When you select “HDMI + BT”, “HDMI/MHL + BT” or “Bluetooth” in step 6, Bluetooth device selection screen will appear. Selec t the device to be connected.

If a connectable Bluetooth device is not displayed, touch [Search] and do the pairing of the devices.

• “Application link setup” also appears when the unit is reset.

• The set ting of “Application link setup” is just for the unit and regardless of the account.

About This Unit

Ñ Requirements Pandora®:

Requirements for listening to the Pandora® are as follows:

• A smartphone with the latest Pandora application installed.

• A Pandora account (if you do not have an account, create one for free using the mobile app or on www.pandora.com).

• An active internet connection.

iPhone or iPod touch

• Apple iPhone or iPod touch with iOS 3 or later installed.

• Latest version of the Pandora application (search App Store for Pandora and install).

Android™

• Latest version of the Pandora Android application (search Google Play for Pandora and install).

32 ñ English

BlackBerry®

• Visit www.pandora.com from the built in browser to download the Pandora application.

• Bluetooth must be built in and the following proﬁles must be supported.

- SPP (Serial Port Proﬁle)

- A2DP (Advanced Audio Distribution Proﬁle)

✎ NOTE

• The Pandora service is available only in the U.S, Australia and New Zealand.

• Because Pandora® internet radio is a third-party service, the speciﬁcations are subject to change wihtout prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable.

• Some Pandora® functionality cannot be operated from this unit.

• For issues using the Pandora® application, please contact Pandora at pandora-support@pandora.com

Ñ Copyrights

• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.

• The “AAC” logo is a trademark of Dolby Laboratories.

• “Made for iPod” and “Made for iPhone” mean that an electronic accessor y has been designed to connect speciﬁcally to iPod, or iPhone, respectively, and has been certiﬁed by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may aﬀect wireless performance.

• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc.

•

• This item incorporates copy protection technology

• Manufactured under license from Dolby

is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.

that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Page 33

• Adobe, Acrobat and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

• Android is a trademark of Google Inc.

• Twitter is a registered trademark of Twitter, Inc.

• Facebook® is a registered trademark of Facebook Inc.

• Nuance is a registered trademark of Nuance Communications, Inc.

• “aupeo” is a trade mark of Aupeo Ltd.

• Dropbox is a trademark of Dropbox Inc.

• The terms HDMI and HDMI High-Deﬁnition Multimedia Interface, and the HDMI logo are trademarks or registed trademarks of HDMI Licensing LLC in the United States and other countries.

• MHL and the MHL logo are a trademark or registered trademark of MHL, LLC.

- Incorporates MHL 2

• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an oﬃcial DivX Certiﬁed® device that plays DivX video. Visit div x.com for more information and soft ware tools to convert your ﬁles into DivX videos.

• ABOUT DIVX VIDEO -ON-DEMAND: This DivX Certiﬁed® device must be registered in order to play purchased DivX Video- on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com for more information on how to complete your registration.

• DivX®, DivX Certiﬁed® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

• QR Code ® is registered trademarks of DENSO WAVE INCORPORATED in JAPAN and other countries.

• The aptX® software is copyright CSR plc or its group companies. All rights reser ved. The aptX® mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions.

• AVC THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED

FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HT TP://WWW.MPEGLA.COM

• MPEG-4 Visual THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM.

• libFL AC Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2 007,2008,2009 Josh Coalson Redistribution and use in source and binar y forms, with or without modiﬁcation, are permitted provided that the following conditions are met:

- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/ or other materials provided with the distribution.

- Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote produc ts derived from this software without speciﬁc prior written permission. THIS SOFT WARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND ONTRIBUTORS ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA , OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

English ñ 33

Page 34

LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILIT Y OF SUCH DAMAGE.

Ñ KENWOOD Route Network Service “Route

Collector” User’s Agreement

This KENWOOD Route Network Service “Route Collector ” User’s Agreement (“Agreement”) sets for th the terms and conditions for use of the KENWOOD Route Network Service “Route Collector” provided by JVCKENWOOD Corporation (“Service”) to the users who fulﬁll the requirements for “Conditions of Use” in the paragraph 1 (“User(s)”), and the rules for handling User’s information necessary for use this Service.

1. Conditions of Use

Users who desire to take advantage of this Service must however ﬁrst register themselves upon agreeing to the terms of this Agreement. This Service may only be used by Users for personal use, not for commercial use.

The terms of this Agreement may be revised or modiﬁed as necessar y at our option without prior notice. In such event, Users shall hereby agree to the application of any such revisions or modiﬁcations as a condition to continued use of the Service.

Also, Users shall be solely responsible for managing and using their registered user account names and passwords. In no event can we accept any responsibility for any problems or damages resulting from the User’s management and usage of its user account name and password management.

2. Period for the Service

Users may in principal continue to use the Service as long as it is being provided by us. However, the Service may be changed, suspended or cancelled at our option without prior notice.

3. Disclaimer

The User shall undertake use of the Service at its own individual responsibility, and accordingly we shall not assume any responsibility for usage of the Service by the User, including but not limited to the examples as follows.

(1) We shall make no warranty as to completeness,

legality, moral correctness, recentness, and appropriateness of the Ser vice and the User shall assume full risk and individual responsibility for using the Ser vice.

(2) We shall assume no responsibility for any loss or

damage that may be incurred by the User due to its use of or inability to use the Service, regardless of whether such loss or damage is direct or indirect, foreseeable or unforeseeable, including but not limited to special damages.

(3) We shall not be involved in nor assume

responsibility for any ac ts, problems, and other issues between Users.

(4) Should any third parties suﬀer losses or damages

as a result of the User ’s use of the Ser vice, we shall assume no responsibility therefor.

(5) Should the User suﬀer losses or damages from

misuse by any third par ties of the User’s registered user account name or password for the Service, we shall assume no responsibilit y therefor.

4. Prohibited Mat ters

Concerning the use of the Ser vice, the following or similar acts by the User are prohibited. Further, should we determine that the User has violated the terms of this Agreement, we reserve the right to suspend use of the Service by the User without prior notice, or take other necessary measures as we may deem necessary. In such case, we bear no obligation to disclose our reasons therefor.

(1) Acts for commercial purposes or gain

(2) Use of the account name or password of his own or

any third parties for improper purposes

(3) Infringement or acts that may likely infringe on

the intellectual property rights of third parties (including but not limited to copyrights, design rights, patent, utility model rights, trademark, trade secrets, and know-how)

(4) Infringement or acts that may likely infringe on the

proprietary rights, honor, trustworthiness, portrait rights, privacy, publicity rights, and other rights or proﬁts

(5) Dissemination or distribution or acts that may likely

constitute dissemination or distribution of contents that may be oﬀensive to public orals and morals, or defamator y to third parties

(6) Criminal acts, acts associated with criminal acts, or

acts that may likely be criminal

(7) Dissemination or distribution of junk mail, spam or

malicious programs such as the computer viruses

(8) Dissemination or distribution of false information

(9) Obstruction or acts that may likely constitute

obstruc tion of the operation of the Service

34 ñ English

Page 35

(10) Acts that cause or that may likely cause trouble,

disadvantages or damages to us or third parties

(11) Use of the Service for illegal purposes

(12) Other acts deemed inappropriate by us

5. Compensation Claim

Should any complaints, lawsuits or similar claims be asserted against us by other Users or third parties for any reasons attributable to the User in connec tion with the Ser vice, we reserve the right to claim from the concerned User any damages, costs and expenses which we may incur (including compensation, attorney fees and legal costs).

6. Ownership of Intellectual Proper ty Rights

All intellectual proper ty rights (including but not limited to copyrights, design rights, patent, utility model rights, trademark, trade secrets, and knowhow), the portrait rights, privacy, publicity rights and other personal rights, and proprietary rights or other property rights of the information, tex t, image, program, layout, design, architecture, and others related to the Ser vice are owned by us, or provided to us under license from the rights holder except for the rights of the thing which are made by User. The unauthorized copying, alteration, or sublicensing of such intellectual proper ty rights, in whole or in part, without our consent may be prohibited by applicable law.

Further, our trade names, trademarks, logo marks and product names, some of which are registered, are used as names and symbols for commercial purposes. Also, trademarks, ser vice names, symbols and other marks belonging to other parties, such as companies and individuals, are also included in the Ser vice.

7. Use of Public Information

We may save and store all information (including but not limited to tex t information, image information, and others) that were released, posted, uploaded, or saved by User via the Service. Furthermore, User shall agree that we may use such information as described previously in every possible condition toward smooth operation and improvement of the Service.

8. Usage Fee

The Service shall be oﬀered without charge to the User. However, the environment that is necessary for use this Service shall be prepared by User on his own responsibility and liability including any miscellaneous expenses such as provider, electricit y, packet communication, and others.

9. User Information

In order to take advantage of the Service, the User must ﬁrst register user account name, password, the User’s valid e-mail address and arbitrary User’s information via the next page (collectively “Information”). We shall properly manage and keep Information as important data in conformity with our “Privacy Policy” and shall only use Information for issuing notices regarding completion of registration, maintenance of Ser vice, suspension of Service, and procedures for reissuance of passwords. We shall not disclose Information for any purposes other than the foregoing without the prior consent of the User.

10. Governing Law

The Agreement shall be governed by and construed in accordance with the laws of Japan.

Ñ About QAU0569 (USB Wi-Fi® Adapter)

The Wi-Fi Adapter is attached to this unit when shipped from the factory. When the adapter is removed, store it in a safe place.

English ñ 35

Page 36

Ñ The marking of products using lasers

CLASS 1 LASER PRODUCT

DNN9150BTM / DNR8015BTM:

The label is at tached to the chassis/case and says that the comp onent uses laser beams that have been classiﬁed as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Ñ Eski Elektrik ve Elektronik

Ekipmanların İmha Edilmesi Hakkında Bilgi (ayrı atık toplama sistemlerini kullanan ülkeleri için uygulanabilir)

Sembollü (üzerinde çarpı işareti

olan çöp kutusu) ürünler ev atıkları olarak atılamaz. Eski elek trik ve elek tronik ekipmanlar, bu ürünleri ve ürün atıklarını geri dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da yardımcı olacaktır.

Declaration of Conformity with regard to the EMC Direct ive 2004/108/EC

Declaration of Conformity with regard to the R&TTE D irective 1999/5/EC

Declaration of Conformity with regard to the RoHS Direc tive 2011/65/EU

Manufacturer:

JVC KENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-shi,

Kanagawa 221-0022, JAPAN

EU Representative:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

English

Hereby, JVC KENWOOD declares that this unit DNN9150BTM/ DNR8015BTM is in compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

Türkçe

Bu vesileyle JVC KENWOOD, DNN9150BTM/ DNR8015BTM ünitesinin, 1999/5/EC Direktiﬁnin başlıca gerek sinimleri ve diğer ilgili hükümleri ile uyumlu olduğunu beyan eder.

For Turkey

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir.