Kenwood BL630 User Manual
key
blender
filler cap
locking lid
filter
goblet
sealing ring
blade unit
base
speed + pulse control
power unit
cord storage
mill (if supplied)
mill jar
to use your blender
1 Fit the sealing ring - ensuring
the seal is fully located under the
rim of the blade unit.
Leaking will occur if the
seal is damaged or not
fitted correctly.
2 Clip the blade unit into the base
.
3 Screw the goblet onto the blade
unit.
4 Put your ingredients into the
goblet.
5 Clip the filter to the lid .
●
The filter has two sieve sizes to
filter out any fibrous or
unprocessed ingredients when
pouring.
●
Turn the filler cap to change the
sieve size selected over the spout
area .
6 Fit and lock the lid by turning
clockwise - ensure that the ▼
mark on the lid lines up with the ▲
mark on the jug. The blender
will not operate if the lid is
not fitted or not locked
correctly.
7 Place the blender onto the power
unit and turn clockwise to lock .
8Select a speed.
Use your blender for soups,
sauces, drinks, pâtés,
mayonnaise, dressings etc. Use
your mill (if supplied) for milling
herbs, nuts and coffee beans.
before using your Kenwood
appliance
●
Read these instructions carefully
and retain for future reference.
●
Remove all packaging and any
labels.
safety
●
Allow all liquids to cool to room
temperature before placing them
in the blender.
●
Switch off and unplug:
●●
before fitting or removing parts
●●
after use
●●
before cleaning.
●
Keep hands and utensils out of the
blender when it’s on the power
unit.
●
Don’t touch the sharp blades.
●
Never let the power unit, cord or
plug get wet.
●
Never use a damaged machine.
Get it checked or repaired: see
‘service’.
●
Never use an unauthorised
attachment.
●
Never leave the machine on
unattended.
●
When removing the blender or mill
from the power unit:
●●
wait until the blades have
completely stopped;
●●
don’t accidentally unscrew the
goblet or mill jar from the blade
unit.
●
Never run the blender empty.
●
Always unplug your blender
when not in use.
●
Only operate the blender with the
lid in place.
●
Do not let infirm people use the
appliance without supervision.
●
Do not let children use or play with
the appliance.
●
Only use the appliance for its
intended domestic use. Kenwood will
not accept any liability if the appliance
is subject to improper use, or failure
to comply with these instructions.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
Important – UK only
●
The wires in the cord are coloured
as follows:
Blue = Neutral,
Brown = Live.
●
The appliance must be protected
by a 3A approved (BS1362) fuse.
Note:
●
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained
from your Kenwood Authorised
Repairer (see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is
inadvertently inserted into a 13A
socket outlet.
●
This machine complies with
European Economic Community
Directive 89/336/EEC.
before using for the first
time
1 Wash the parts: see ‘cleaning’.
recommended speed chart
speed usage/food items max. quantity
1 Frothing milk 1 litre
Light mixes e.g. batters, milkshakes,
scrambled egg 1 litre
2 - 3 Soups 1.6 litres
Thicker mixes e.g. sauces, pâtés
Mayonnaise 3 eggs + 450ml
oil
Smoothie drinks
Place the fresh fruit and liquid ingredients in 800ml liquid
first (includes yoghurt, milk and fruit juices)
Then add ice or frozen ingredients (includes
frozen fruit, ice or ice cream)
(P) Operates the motor in a start/stop action. The
pulse pulse will operate for as long as it is held in
position.
Ice crushing 6 cubes
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com
57753/1
BL620 series
BL630 series
Important
blender and mill
●
To ensure long life of your blender,
never run it for longer than 60
seconds or the mill for longer than
30. Switch off as soon as you’ve
got the right consistency.
●
Don’t process spices – they may
damage the plastic.
●
The machine won’t work if the
blender or mill is fitted incorrectly.
blender only
●
Don’t put dry ingredients into the
blender before switching on. If
necessary, cut them into pieces;
remove the filler cap; then, with
the machine running, drop them
through one by one. Keep your
hand over the opening. Empty
regularly.
●
Don’t use the blender as a storage
container. Keep it empty before
and after use.
●
Never blend more than 1.6 litres
or more than 1 litre for frothy
liquids like milkshakes.
●
Always ensure that the filter is
fitted to the lid assembly before
use.
●
Smoothie recipes - never blend
frozen ingredients that has formed
a solid mass during freezing,
break it up before adding to the
goblet.
mill only
Use for dry ingredients only.
hints
●
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the machine running,
pour the oil down slowly through
the hole in the lid.
●
Thick mixtures, e.g. pâtés and
dips, may need scraping down. If
it’s difficult to process, add more
liquid.
to use your mill (if supplied)
1 Put your ingredients into the jar.
Fill it no more than half full.
2 Fit the sealing ring into the blade
unit ensuring the seal is fully
located under the rim of the blade
unit.. Leaking will occur if
the seal is damaged or not
fitted correctly. Then clip the
blade unit into the base .
3 Turn the base unit upside down.
Lower it into the jar, blades down.
4 Screw the base unit onto the jar
until it’s finger-tight.
5 Place the mill onto the power unit
and turn to lock .
6 Select a speed or use the pulse
control.
cleaning
●
Always switch off, unplug and
dismantle before cleaning.
●
Empty the goblet before
unscrewing it from the blade unit.
●
Do not place any parts in the
dishwasher.
power unit
●
Wipe with a damp cloth, then dry.
●
Store excess cord in the storage
area at the back of the power
unit .
blade unit
1 Remove the blade unit from out of
the base by pushing up from
underneath.
Care should be taken when
removing the blade unit from the
base.
2 Remove and wash the sealing ring.
3 Don’t touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don’t immerse the
blade unit in water.
other parts
Wash by hand, then dry.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised
Kenwood repairer.
UK
If you need help with:
●
using your machine or
●
servicing, spare parts or repairs (in
or out of guarantee)
call Kenwood customer care on
023 9239 2333. Have your
model number ready – it’s on
the underside of the power unit.
●
spares and attachments
call 0870 2413653.
●
other countries
Contact the shop where you
bought your machine.
guarantee (uk only)
If your blender goes wrong within
one year from the date you bought
it, we will repair it (or replace it if
necessary) free of charge
provided:
●
you have not misused, neglected
or damaged it;
●
it has not been modified (unless by
Kenwood);
●
it is not second-hand;
●
it has not been used
commercially;
●
you have not fitted a plug
incorrectly; and
●
you supply your receipt to
show when you bought it.
This guarantee does not affect
your statutory rights.
carrot and coriander
soup
25g butter
50g onion chopped
1 clove garlic crushed
640g carrot cut into 1
1
⁄2 cm cubes
cold chicken stock
10-15ml (2-3tsp) ground coriander
salt and pepper
1 Melt the butter in a pan, add the
onion and garlic and fry until soft.
2 Place the carrot into the liquidiser,
add the onion and garlic. Add
sufficient stock to reach the 1.6L
level marked on the goblet. Fit the
lid and filler cap.
3 Blend on maximum speed for 5
seconds for a coarse soup or
longer for a finer result.
4 Transfer the mixture to a
saucepan, add the coriander and
seasoning and simmer the soup
for 30 to 35 minutes or until
cooked.
5 Adjust the seasoning as necessary
and add extra liquid if required.
Loading...