Never fit the blade unit to the
power unit without the
blender goblet or mill jar
fitted.
●
Always unplug the appliance before
putting your hands or utensils in the
goblet.
●
Always take care when handling the
blade assembly and avoid touching
the cutting edge of the blades when
cleaning.
●
Only operate the blender with the lid
in place.
●
Only use the goblet with the blade
assembly supplied.
●
Never let the power unit, cord or
plug get wet.
●
Never use a damaged appliance.
Get it checked or repaired: see
‘service and customer care’.
●
Never use an unauthorised
attachment.
●
SCALD RISK: Liquids should be
allowed to cool to room temperature
before blending.
●
Never leave the appliance
unattended when it is operating.
●
When removing the blender or mill
from the power unit:
●●
wait until the blades have
completely stopped;
●●
don’t accidentally unscrew the
goblet or mill jar from the blade
assembly.
●
Never run the blender empty.
●
ever blend more than the
N
aximum capacity stated in the
m
ecommended speed chart.
r
●
To ensure long life of your blender
ills and soft fruit filter, do not run
m
or longer than 60 seconds.
f
●
Smoothie recipes - never blend
rozen ingredients that have formed
f
solid mass during freezing, break it
a
up before adding to the goblet.
●
Don’t use the blender as a storage
container. Keep it empty before and
after use.
●
Always use the blender on a secure,
dry level surface.
●
Never place this appliance on or
near a hot gas or electric burner or
where it could touch a heated
appliance.
●
Misuse of your blender can result in
injury.
●
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
●
Children should be supervised to
ensure that they do not play with the
appliance.
●
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper use,
or failure to comply with these
instructions.
3
efore plugging in
b
●
Make sure your electricity supply is
he same as the one shown on the
t
nderside of the appliance.
u
mportant - UK only
I
●
The wires in the cord are coloured
s follows:
a
lue = Neutral
B
Brown = Live.
●
The appliance must be protected by
a 13A approved (BS1362) fuse.
Note:
●
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
key
blender
filler cap
locking lid
pouring slots
goblet
blender sealing ring
blender blade unit
power unit
speed + pulse control
ice crushing button
cord storage
ulti mill (if supplied)
m
blender sealing ring
blender blade assembly
multi mill jar
rinding mill (if supplied)
g
mill jar
grinding mill blade assembly
rating mill (if supplied)
g
mill jar
grating mill blade assembly
soft fruit filter attachment
(if supplied)
soft fruit filter
to use your blender
Use your blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice.
1 Fit the blender sealing ring into
the blender blade unit - ensuring
the seal is located correctly in the
grooved area.
●
Leaking will occur if the seal
is damaged or incorrectly
fitted.
2 Screw the blade assembly onto the
goblet – ensuring the blade
assembly is fully tightened
to the graphics on the underside of
the blade unit as follows:
- unlocked position
- locked position
3 Put your ingredients into the goblet.
4 Put the filler cap in the lid.
5 Fit the lid to the goblet and turn
clockwise to lock.
6 Place the blender onto the power
unit with the handle situated to the
right hand side and lock by turning
clockwise until you hear a “click”
●
The appliance won’t work if
the blender is incorrectly
fitted.
7 Select a speed (refer to the
recommended speed chart).
. Refer
.
4
lender hints
b
●
To blend dry ingredients - cut into
ieces, remove the filler cap, then
p
ith the appliance running, drop the
w
pieces down one by one. Keep your
and over the opening. For best
h
esults empty regularly.
r
●
The processing of spices is not
ecommended as they may damage
r
he plastic parts.
t
blender recommended speed chart
speed usage/food itemsmax. quantity
●
hen making mayonnaise, put all
W
the ingredients, except the oil, into
he blender. Remove the filler cap.
t
hen, with the appliance running,
T
add the oil slowly through the hole in
he lid.
t
●
hick mixtures, e.g. pâtés and dips,
T
may need scraping down. If the
ixture is difficult to process, add
m
ore liquid.
m
1Frothing milk1 litre
Light mixes e.g. batters, milkshakes,
scrambled egg1 litre
2 - 3Soups & drinks1.6 litres
Thicker mixes e.g. pâtés
Mayonnaise3 eggs + 450g
Smoothie drinks
Place the fresh fruit and liquid ingredients in800ml
first (includes yoghurt, milk and fruit juices)liquid
Then add ice or frozen ingredients (includes
frozen fruit, ice or ice cream)
Ice crushing - operate in short bursts until6 cubes
crushed to the desired consistency.
oil
(P)Operates the motor in a start/stop action.
pulse The pulse will operate for as long as it is held in–
position.
to use your multi mill
(if supplied)
Use your multi mill for milling herbs,
nuts, coffee beans and purees.
1 Put your ingredients into the jar .
Fill it no more than half full.
2 Fit the blender sealing ring into
the blender blade unit - ensuring
the seal is located correctly in the
grooved area.
●
Ensure that the seal is fitted
correctly.
3 Turn the blade unit
Lower it into the jar, blades down
upside down.
. Turn anti-clockwise to lock.
4 Place the mill onto the power unit
and lock by turning clockwise until
you hear a “click”
5 Select a speed or use the pulse
control.
.
5
to use your grinding mill
(if supplied)
Suitable for grinding spices, coffee
beans and processing ginger, garlic
nd chillies.
a
1 Place your ingredients into the blade
assembly
Fit the jar
2
to lock .
3 Place the mill onto the power unit
and lock by turning clockwise until
you hear a “click”
4 Select a speed or use the pulse (P)
control.
ingredientsmillmax qty speed operating
Herbs - best choppedMulti15g35 – 10 secs
when clean and dry
NutsMulti or Grinding50g310 – 15 secs
Coffee BeansMulti or Grinding50g330 secs
Baby Foods & PureesMulti50g330 secs
Spices – such as blackGrinding50g330 – 60 secs
peppercorns, cardamom
seeds, cumin seeds,
coriander seeds, fennel
seeds, whole cloves etc.
ChilliesGrinding30g310 secs
Fresh Root GingerGrinding30g310 secs
GarlicGrinding4 cloves310 secs
Parmesan Cheese – cut Grating60g310secs
into 1cm cubes
Dried FruitGrating50g310 secs
CoconutGrating50g320 secs
NutmegGrating2340 secs
.
nd turn anti-clockwise
a
.
mill recommended speed chart
to use your grating mill
(if supplied)
Suitable for grating parmesan
cheese, nutmeg, coconut and dried
ruit.
f
1 Place your ingredients into the blade
assembly
Fit the jar
2
to lock .
3 Place the mill onto the power unit
and lock by turning clockwise until
you hear a “click”
4 Select a speed or use the pulse (P)
control.
.
nd turn anti-clockwise
a
.
time
hints
●
For optimum performance when
processing spices we recommend
that you do not process more than
50g at a time in the mill.
●
Whole spices retain their flavour for
a much longer time than ground
spices so it is best to grind a small
quantity fresh at a time to retain the
flavour.
●
To release the maximum flavour and
essential oils whole spices are best
roasted prior to milling.
●
Baby food/purees - allow cooked
food to cool to room temperature
before processing in the mill.
6
to use your filter
(if supplied)
se your filter to extract juice from
U
ruit or soya milk from soya beans.
f
soft fruit
1 Fit the filter
nsuring the slots on the filter locate
e
down correctly over the ribs in the
goblet
2 Fit the lid securely to the goblet
without the filler cap. Position the
pouring slots
3 With the blender on maximum, add
the soft fruit a handful at a time
down the hole in the lid.
4 Refer to the recommended speed
chart. Do not process for more
than 60 seconds.
5 After blending, fit the filler cap and
pour the juice into a glass.
hints
●
To aid pouring liquid may need to be
added to the blended mix.
●
Where appropriate remove the
stalks/stems and skins of the fruit
before processing.
●
Cut large fruit into small pieces
before processing.
●
Process a handful of fruit at a time.
into the goblet
.
over the spout area.
oya milk
s
●
ecommended Maximum
R
Quantity
0g dried Soya Beans
6
00 ml cold water
8
Soak the Soya Beans for a minimum
1
f 8 hours or overnight before
o
blending. Do not blend beans
that have not been soaked.
2 Fit the filter
ensuring the slots on the filter locate
down correctly over the ribs in the
goblet
3 Fit the lid securely to the goblet
without the filler cap. Position the
pouring slots
4 Drain the beans and place inside the
soya filter.
5 Pour the cold water down the soya
filter and then fit the filler cap. If
processing 60g beans and 800 ml of
water the level will be 1 Litre.
6 Blend for 30 seconds at maximum
speed.
7 After blending pour into a suitable
sized pan bring to the boil and
simmer gently for 20 minutes. Stir
continuously and take care
not to let the milk burn.
8 Flavour with sugar, salt or other
flavourings if desired.
9 Once cool the Soya milk is ready to
drink and can be stored in a fridge
for up to 2 days.
Store excess cord in the storage
area at the back of the power
unit
햻.
blade assemblies
blender and multi mill
●
Remove the blade unit from the
goblet or mill by turning to the
unlock positionto release.
grinding and grating mills
●
Remove the blade unit from the jar
by tur ning in a clockwise direction.
1 blender/multi mill: remove and
wash the sealing ring.
2 Don’t touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don’t immerse the
blade unit in water.
3 Leave to dry upside down.
soft fruit filter
●
Clean the mesh using a soft brush.
other parts
Wash by hand, then dry.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
ENWOOD or an authorised
K
KENWOOD repairer.
UK
f you need help with:
I
●
using your appliance or
●
servicing, spare parts or repairs (in
or out of guarantee)
콯 call Kenwood customer care on
023 9239 2333. Have your
model number (ie BL460) and
date code (4 digit code ie
10D13) ready. They are on the
underside of the power unit.
●
spares and attachments
콯 call 0844 557 3653.
●
other countries
Contact the shop where you bought
your appliance.
●
Designed and engineered by
Kenwood in the UK.
●
Made in China.
8
MPORTANT INFORMATION FOR
I
ORRECT DISPOSAL OF THE
C
PRODUCT IN ACCORDANCE
ITH EC DIRECTIVE
W
002/96/EC.
2
At the end of its working life, the product
must not be disposed of as urban
waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment and
health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need to
dispose of household appliances
separately, the product is marked with
a crossed-out wheeled dustbin.
guarantee (uk only)
If your blender goes wrong within
one year from the date you bought
it, we will repair it (or replace it if
necessary) free of charge provided:
●
you have not misused, neglected or
damaged it;
●
it has not been modified (unless by
Kenwood);
●
it is not second-hand;
●
it has not been used commercially;
●
you have not fitted a plug incorrectly;
and
●
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
carrot and coriander
soup
25g butter
0g onion chopped
5
1 clove garlic crushed
640g carrot cut into 1
old chicken stock
c
10-15ml (2-3tsp) ground coriander
salt and pepper
1 Melt the butter in a pan, add the
onion and garlic and fry until soft.
2 Place the carrot into the liquidiser,
add the onion and garlic. Add
sufficient stock to reach the 1.6 L
level marked on the goblet. Fit the lid
and filler cap.
3 Blend on maximum speed for 5
seconds for a coarse soup or longer
for a finer result.
4 Transfer the mixture to a saucepan,
add the coriander and seasoning
and simmer the soup for 30 to 35
minutes or until cooked.
5 Adjust the seasoning as necessary
and add extra liquid if required.
1
⁄2 cm cubes
9
HEAD OFFICE: Kenwood Limited, 1-3 Kenwood Business Park, New Lane, Havant, Hampshire PO9 2NH
40355/3
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.