Kent Euroclean SelectGloss KF-2019B Owner Manual

OWNER'S MANUAL

FOR COMMERCIAL USE ONLY

FLOOR MACHINE

MANUEL D'UTILISATION

A USAGE INDUSTRIEL EXCLUSIVEMENT

MATERIAL D'ENTREIEN DES SOLS

MANUAL DEL PROPIETARIO

PARA USO COMERCIAL SOLAMENTE

MAQUINAS PARA EL SUELO

SelectGloss KF-2019B

12

EDITION 2

FEBRUARY 1997

083455M-1

TABLE OF CONTENTS

ENGLISH

SAFETY INSTRUCTIONS ..................................................................................................3

UNPACKING AND SET UP.................................................................................................3

PREPARATION ................................................................................................................... 3

OPERATION ......................................................................................................................4

CLEAN UP AND STORAGE ............................................................................................... 4

MAINTENANCE ..................................................................................................................4

PRODUCT IDENTIFICATION .............................................................................................5

TROUBLE SHOOTING .......................................................................................................5

OPTIONAL ACCESSORIES ...............................................................................................5

FRANÇAIS

INSTRUCTIONS DE SÉCURITÉ ........................................................................................6

DÉBALLAGE ET ASSEMBLAGE.......................................................................................6

PRÉPARATION ................................................................................................................... 6

MODE D’EMPLOI................................................................................................................7

NETTOYAGE ET STOCKAGE ............................................................................................ 7

ENTRETIEN ........................................................................................................................ 7

IDENTIFICA TION DU PRODUIT.........................................................................................8

SOLUTIONS AUX PROBLÈMES ........................................................................................8

ACCESSOIRES EN OPTION..............................................................................................8

ESPAÑOL

INSTRUCCIONES DE SEGURIDAD ..................................................................................9

DESEMBALAJE Y PREPARACIÓN.................................................................................... 9

PREPARACIÓN ..................................................................................................................9

OPERACIÓN..................................................................................................................... 10

LIMPIEZA Y ALMACENAMIENTO ....................................................................................10

MANTENIMIENTO ............................................................................................................10

IDENTIFICACIÓN DE PRODUCTO.................................................................................. 11

GUÍA PARA ENCONTRAR AVERÍAS ............................................................................... 11

ACCESORIOS OPCIONALES .......................................................................................... 11

1

FIGURE 2FIGURE 1

FIGURE 4FIGURE 3

FIGURE 6FIGURE 5

FIGURE 8FIGURE 7

FIGURE 9 FIGURE 10

2

SAFETY INSTRUCTIONS

UNPACKING AND SET UP

READ ALL INSTRUCTIONS BEFORE USING!

When using an electrical appliance, basic precautions

should always be followed, including the following:

WARNING

Failure to follow these safety instructions could
result in damage to the machine, damage to prop­erty , or bodily injury.

fl Use machine only as described in this manual.

Do not use in ways it was not intended. Use only
manufacturer's recommended attachments.

fl Do not leave the machine unattended when it is

turned on. Turn off all switches when not in use
and before servicing.

fl Do not allow to be used by untrained personnel.

Close attention is necessary when used near
children.

fl If the machine is not working as it should, has

been dropped, damaged, or left outdoors, return
it to a service center before using.

fl Be cautious when working with batteries. Always

wear protective eye and clothing items.

fl Avoid electrical shock, remove all jewelry and do

not place tools or other metal objects on or near
the batteries.

ˇ Do not use a charger with a damaged power

cord.

fl This machine creates suction and contains a

rotating pad. Keep hair, loose clothing, fingers,
and all other parts of the body away from open­ings and moving parts. Do not insert any object
into any of the openings in the machine.

fl Do not pick up anything that is burning or smok-

ing, such as cigarettes, matches, or hot ashes.

fl Do not use the machine to pick up flammable or

combustible liquids such as gasoline. Do not use
in areas where flammable and/or explosive vapor

or dust is present.
fl Do not use on a floor with damaged or loose tiles.
ˇ Do not transport the machine without securing it

to the bed of the vehicle.

SAVE THESE INSTRUCTIONS

Carefully inspect all components to insure that there is
no concealed freight damage. If such damage is dis­covered, file a Damage Report immediately with the de­livering carrier.

Install the batteries and cables as illustrated on the
BATTERY WIRING DIAGRAM located inside the ma­chine on the hood.

PREPARATION

WARNING: BEFORE ANY SERVICING BE SURE
THE MACHINE IS TURNED OFF AND THE BAT­TERY CHARGER IS DISCONNECTED.

PAD INST ALLATION (Figure 1)

CAUTION: Use of burnishing pads larger than 19”
diameter will damage this machine.

Turn the MASTER SWITCH “ON” and raise the pad
head by toggling the P AD LIFT SWITCH to the “UP” po­sition. Open the machine’s hood and tilt the pad head
back. Unscrew the padholder, center the pad on the
driver and press on. Replace the padholder.

CONTROLS

MASTER SWITCH (Figure 2)

Turn on main power for machine operation. When this
switch is in the “ON” position, the pilot light is illumi­nated.

VACUUM MOTOR SWITCH (Figure 3)

Turn on the vacuum motor to collect dust created when
burnishing the floor.

P AD LIFT SWITCH (Figure 4)

Toggle to OFF to raise or ON to lower the pad head.

P AD PRESSURE GAUGE (Figure 5)

This reference gauge shows the amount of pad pres­sure on the floor relative to the amount of amperage
draw on the pad drive motor.

P AD PRESSURE ADJUSTMENT KNOB (Figure 6)

Turn knob counterclockwise to increase “+”, clockwise
to decrease “-” pad pressure.

TRAVERSE SPEED (Figure 7)

Turn knob counterclockwise to increase machine
speed, clockwise to decrease.

CIRCUIT BREAKER - 70 AMP (Figure 8)

This protects the pad drive motor circuit from overloads.

CIRCUIT BREAKER - 5 AMP (Figure 9)

This protects the dynamic braking system from a po­tential short circuit.

3