Kenmore C6801, 7800 User Manual

Use & Care Guide Manual de Uso y Cuidado

Guide d'Utilisation et d'Entretien

English / Espa_ol / Fran_ais

TabJe of Contents / {ndice/TabJe des Matieres ......4

Models/Modelos/Mod?_les: 6800, 7800, C6801

P/N W]0096994A Sears Brands Management Corporation

Hoffman Estates, iL 60179 U.S.A. www.kenmore.com www.sears.com

Sears Canada inc. Toronto, Ontario, Canada M5B 2B8

www.sears.ca

IIIIIIIIIIIIIIIIIIIIIilllllllllllllllllll

Jlllllllllllllllllll

DRYER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean:

You can be killed or seriously injured if you don't immediately follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

WARNING - "Risk of Fire"

- Clothes dryer installation must be performed by a qualified installer.

- install the clothes dryer according to the manufacturer's instructions and local codes.

- Do not install a clothes dryer with flexible plastic venting materials, if flexible metal (foil type) duct is installed, it must be of a specific type identified by the appliance

manufacturer as suitable for use with clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct clothes dryer airflow and increase the risk of fire.

- To reduce the risk of severe injury or death, follow all installation instructions.

- Save these instructions.

State of California Proposition 65 Warnings: WARNING: This product contains a chemical known to the State of California to cause cancer.

WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

IMPORTANT SAFETY INSTRUCTIONS

WARNING." To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions,

including the following:

[] Read all instructions before using the dryer. [] Do not place items exposed to cooking oils in your dryer.

Items contaminated with cooking oils may contribute to

a chemical reaction that could cause a load to catch fire.

[] Do not dry articles that have been previously cleaned in,

washed in, soaked in, or spotted with gasoline, dry- cleaning solvents, or other flammable or explosive

substances as they give off vapors that could ignite or explode.

[] Do not allow children to play on or in the dryer. Close

supervision of children is necessary when the dryer is used near children.

[] Before the dryer is removed from service or discarded,

remove the door to the drying compartment. [] Do not reach into the dryer if the drum is moving. [] Do not install or store the dryer where it will be exposed

to the weather. [] Do not tamper with controls.

[] Do not repair or replace any part of the dryer or attempt

any servicing unless specifically recommended in this Use and Care Guide or in published user-repair instructions that you understand and have the skills to carry out.

[] Do not use fabric softeners or products to eliminate static

unless recommended by the manufacturer of the fabric softener or product.

[] Do not use heat to dry articles containing foam rubber or

similarly textured rubber-like materials.

[] Clean lint screen before or after each load. [] Keep area around the exhaust opening and adjacent

surrounding areas free from the accumulation of lint, dust, and dirt.

[] The interior of the dryer and exhaust vent should be

cleaned periodically by qualified service personnel.

[] See "Electrical Requirements" located in the installation

instructions for grounding instructions.

SAVE THESE INSTRUCTIONS

WARNING: For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, or to prevent property damage, personal injury, or death.

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

- WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your building.

• Clear the room, building, or area of all occupants.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

• if you cannot reach your gas supplier, call the fire department.

= Installation and service must be performed by a qualified installer, service agency, or

the gas supplier.

WARNING: Gas leaks cannot always be detected by smell. Gas suppliers recommend that you use a gas detector approved by UL or CSA.

For more information, contact your gas supplier. If a gas leak is detected, follow the "What to do if you smell gas" instructions.

Table of Contents

DRYER SAFETY ..................................... 2

CHECK YOUR VENT SYSTEM

FOR GOOD AIR FLOW ..................... 4

USE EVENHEAT TM AUTO DRY CYCLES FOR BETTER FABRIC

CARE AND ENERGY SAVINGS ........ 4

CONTROL PANEL

AND FEATURES .................................... 5

CYCLE GUIDE ....................................... 6

USING YOUR DRYER .......................... 7

DRYER CARE ......................................... 9

TROUBLESHOOTING ........................ 12

PROTECTION AGREEMENTS'° ........ 14

WARRANTY ........................................ 14

ASSISTANCE OR SERVICE .............. 44

CHECK YOUR VENT SYSTEM FOR GOOD AiR FLOW

Indice

SEGURIDAD

DE LA SECADORA ........................... 15

REVISE QUE EL SISTEMA DE VENTILACION TENGA

UN BUEN FLUJO DE AIRE ................ 17

UTILICE LOS ClCLOS AUTOMATICOS PARA UN MEJOR CUIDADO DE LAS TELAS

Y AHORRO DE ENERGIA ................ 17

PANEL DE CONTROL

Y CA RACTERISTICAS ....................... 18

GUIA DE CICLOS .............................. 19

USO DE LA SECADORA ................. 21

CUIDADO DE LA SECADORA ......... 23

SOLUCI6N DE PROBLEMAS ........... 26

CONTRATOS DE PROTECCION .....28

GARANTIA ........................................ 28

AYUDA O SERVICIO TECNICO ..... 44

Maintain good air flow by:

[] Cleaning your lint screen before each load. [] Replacing plastic or foil vent material with 4" (102 mm)

diameter heavy_ rigid vent material.

Table des mati_res

SECURITEDE LA SECHEUSE............29

VERIFICATION D'UNE CIRCULATION D'AIR ADEQUATE

POUR LE SYSTEME

D'EVACUATION .................................. 31

UTILISATION DES PROGRAMMES AUTOMATIQUES POUR UN MEILLEUR SOIN DU TISSU ET

DAVANTAGE D'F:CONOMIES

D'ENERGIE ........................................... 31

TABLEAU DE COMMANDE

ET CARACTERISTIQUES ................... 32

GUIDE DE PROGRAMME ................ 33

UTILISATION DE LA SECHEUSE ...... 35

ENTRETIEN DE LA SECHEUSE........ 37

DF:PANNAGE ..................................... 40

CONTRATS DE PROTECTION ........ 42

GARANTIE ......................................... 42

ASSISTANCE OU SERVICE ............. 44

Fire Hazard

Use a heavy metal vent. Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death or fire.

[]

Using the shortest length of vent possible.

[]

Using no more than four 90 ° eibows in a vent system;

each bend and curve reduces air flow.

Bett

Good Air Flow

Along with heat, dryers require good air flow to eff:icientiy dry laundry. Proper venting will reduce your drying times

and improve your energy savings. See "installation Instructions".

The venting system attached to the dryer plays a big role in good air flow.

Service calls caused by improper venting are not covered by the warranty and will be paid by the customer, regardless of who installed the dryer.

[] Removing lint and debris from the exhaust hood. [] Removing lint from the entire length of the vent system

at least every 2 years. When cleaning is complete,

be sure to follow the "Installation Instructions" supplied

with your dryer for final product check.

[] Clearing away items from the front the dryer.

USE EvenHeat TM AUTO DRY CYCLES FOR BETTER FABRIC CARE AND ENERGY SAVINGS

Use the Evenheat TM Auto Dry Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Evenheat TM Auto Dry Cycles, drying air temperature and moisture level are sensed in the load. This sensing occurs throughout

the drying cycle and the dryer shuts off: when the load reaches the selected dryness. Choose Normal to save energy.

With Time Cycles, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying. Use Time Cycle for the occasional damp load that needs a little more drying time or when using the drying rack.

CONTROL PANEL AND FEATURES

EVENHEAT AUTO DRY

Norma|

Bu ual

Damp

Cool Down

Wrinkle Guard

CheckLintScreen

Heavy Dut Delicates

Dry

Time press Dry

_ AutoMoistureSensing

er,ergy savilg ecn ,ology

Not all features and options are available on all models.

O CYCLE STATUS LIGHTS

Lights indicate the progress of the drying cycles.

DRYER CYCLE KNOB

Use your Dryer Cycle Knob to select availabie cycles on your

dryer, Turn the knob to select a cycle for your laundry load,

See "Cycle Guide" for detailed descriptions of cycles.

EvenHeaf TM Auto Dry

with Auto Moisture Sensing Control

Auto Dry cycles give the best drying in the shortest time.

Drying time will vary based on fabric type, load size, and

dryness setting.

Time Cycles

Will run the dryer for the specified time on the control.

Press the Dry Temp button to change the drying temperature

from the default setting, if desired. Press the Less Time or

More Time buttons to change the drying time from the

default setting, if desired.

Time Dry

Default dry time setting is 40 minutes.

Express Dry

Default dry time setting is 23 minutes.

OPTIONS AND SETTINGS

TiME CYCLES_-_

POWER START/PAUSE

Appearance may vary.

Wrinkle Guard TM Feature

When you are unable to remove a load of clothes from the dryer as soon as it stops, wrinkles can form. The WRINKLE

GUARD TM feature periodically tumbles, rearranges, and fluffs the load to help keep wrinkles from forming.

[] WRINKLE GUARD TM gives you a period of heat-free,

periodic tumbling at the end of a cycle. Some models provide two time choices (60 or 150 minutes), other

models provide only one time choice (90 minutes). Press

the WRINKLE GUARD TM button to turn On or Off at any time before the cycle has ended.

Cycle Signal

The Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the

cycle reduces wrinkling.

Press CYCLE SIGNAL until the desired volume (Off, Low,

or High) is selected.

NOTE: When the Wrinkle Guard TM setting is selected and the Cycle Signal is on, the tone will sound every 20 minutes until the clothes are removed, or the Wrinkle Guard TM setting ends.

Damp Signal (for use with Evenheaf TM Auto Dry Cycles only)

Selecting the Damp Dry Signal will alert you when your clothes are approximately 80% dry. This is useful when

you want to remove lightweight items in a mixed load to avoid overdrying or remove partially dry items that

may need ironing.

Dry Temp (for use wlth Time cycles only)

Select a drying temperature based on the fabrics in

your load. If you are unsure of the temperature to select for a load,, select the lower setting rather than the higher

setting. See "Cycle Guide". NOTE: The Air Only Temp Feature is not available on the

Auto Dry Cycles.

Dry Level (for use with EvenHeaf TM Auto Dry Cycles only)

Use with Auto Dry cycles to select the desired dryness level. See "Cycle Guide".

START/PAUSE BUTTON

Press START/PAUSE to start a cycle, or press START/PAUSE once while a cycle is in process to pause it.

POWER BUTTON

Press to turn the dryer on and off.

CYCLE GUIDE-AUTO DRY CYCLES

Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.

AUTO DRY - Senses moisture in the load or air temperature and shuts off: when the load reaches the selected dryness level. Depending on model, temperature may be selected on cycle knob or be a separate control.

Default

Cycle Time:

children's clothing, or other items needing to

be sanitized

Jeans, heavy work clothes, towels

i Heavy Duty

----bTv

Te_p:

High

Levee

Normal

Less

Normal

Less

Jackets, comforters, cotton or polyester

fiber filled pillows.

Work clothes, medium weight fabrics, sheets

Casual, shirts, pants,

lightweight items,

synthetics, delicates, athletic wear

Lingerie, exercise wear, washable woolens

NOTE: If loads do not seem as dry as you would like, set the Dry Level to More the next time you dry a similar load. If load seems drier than you like, set the Dry Level to Less the next time you dry a similar load.

Bulky Medium High More 35 Damp Signal Evenly dries large or heavy loads.

Normal

Medium

Normal Wrinkle Guard TM

Less Cycle Signal

Normal

Less

Casual

Low

Normal

Less

Delicates

Low

Normal

Less

Available

Damp Signal

Wrinkle Guard TM

Cycle Signal

Dry Temp

Damp Signal

Wrinkle Guard TM

Cycle Signal

Dry Temp

Damp Signal

Wrinkle Guard TM

Cycle Signal

Dry Temp

Damp Signal

Wrinkle Guard TM

Cycle Signal

Dry Temp

Damp Signal

Wrinkle Guard TM

Cycle Signal

Dry Temp

This cycle isdesigned ._ to eliminate 99.9% of

3 common infectious

bacteria. This cycle should be run to completion

to ensure sanitization.

For best results, do not interrupt this cycle.

For drying large or heavy items.

Medium to large loads of mixed

fabrics and items.

For normal light- to medium-weight fabrics. Drying time varies based on

fabric type, load size, and dryness

setting.

For gently drying delicate items.

CYCLE GUIDE-TIME CYCLES

Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.

TIME/EXPRESS DRY - Will run the dryer for the specified time on the control. Depending on model, temperature may be selected

on cycle knob or be a separate control.

items to dry: i Cycle: Drying Defaul| Cycle Av e Cycle Details:

Temperatbre: " Op"

Any load Time Dry Any 4O

Rubber, plastic, heat Time Dry Air Only 40 Wrinkle Guard TM Use a no heat (Air Only) setting for foam,

sensitive fabrics Less/More Time rubber, plastic, or heat-sensitive fabrics.

Small loads and Time/Express High/Low 23 Dry Temp For small loads of 2-3 items. workout clothes Dry Wrinkle Guard TM

(2-3 items) Less/More Time

Dry Temp

Wrinkle Guard TM

Less/More Time

Dries items to a damp level for items that do not require an entire drying cycle.

Select a drying temperature based on the fabrics in your load. If you are unsure

of the temperature to select for a toad, select the lower setting rather than the

higher setting.

Seffing the Dry Ternperafure

If your dryer has multiple heat settings:

A High to Medium High temp setting may be used for drying heavyweight items such as towels and work clothes.

A Low to Medium temp setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear, permanent press fabrics, and some knits.

Use an Air Only temp setting for foam, rubber, plastic, or heat-sensitive fabrics.

Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.

USING YOUR DRYER

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Do not dry anything that has ever had anything

flammable on it (even after washing).

Failure to follow these instructions can result in death,

explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury

to persons, read the IMPORTANT SAFETY INSTRUCTIONS

before operating this appliance.

1. Clean the lint screen

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on it (including cooking oils).

items containing foam, rubber, or plastic must be dried on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in death or fire.

2. Load the dryer

Clean the lint screen before each load. Pull the lint screen straight up. Roll lint off the screen with your fingers. Do not rinse or wash

screen to remove lint. Push the lint screen firmly back into place. For additional cleaning information, see "Dryer Care".

Place laundry in the dryer. Close the door. NOTE: Your model may have a different door than the one

shown. Some models have drop down doors. Do not overload the dryer; clothes should be able to tumble

freely.

3. Press POWER

POWER

Press POWER button to turn on the dryer.

4. Select desired cycle

Dry Temp (for use with Time Cycles only)

Press the Dry Temp button to change the drying temperature from the default setting.

Dry Level (for use with Auto Cycles only)

Normal Dry Level is a good starting point for optimal energy savings.

You can select a different Dry Level, depending on your load, by

pressing the button for More, Normal, or Less. Selecting More, Normal, or Less automatically adjusts the Dry Level at which the

dryer will shut off. Once a Dry Level is set, it cannot be changed without stopping the cycle.

Auto Dry cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting.

NOTE: More Dry removes more load moisture. Normal Dry is used for a starting point for Auto drying. Less Dry removes Jess moisture and is used for loads you may want to put on a hanger

to complete drying.

EVENHEAT AUTO DRY

Normal

TiME CYCLES

Select the desired cycle for your load. See "Cycle Guide" or "Control Panel and Features".

5. Set cycle settings

High

Med High

Medium

Low

Air Only

TIME CYCLES ONLY AUTO CYCLES ONLY

60 Min 150 Min

Off

WrinkJe GuardTM feature

[] Get up to 60 or 150 minutes for models with two choices (90

minutes for models with only one choice) of heat-free, periodic tumbling at the end of a cycle. Press the WRINKLE GUARD TM

button to turn On or Off: at any time before the cycle has ended.

[] The WRINKLE GUARD TM feature is preset to "Off:". Jf selected

for other cycles, the WRINKLE GUARD TM feature setting will remain "On" the next time that cycle is selected.

6. Select cycle options (if desired)

--TIME CYCLES --

AUTO CYCLES ONLY OFF/LOW/HIGH

Press appropriate button for selected options, Jf desired. For Time Cycles, press More Time Jf you want to increase the cycle

length, or press Less Time Jf you want to decrease the cycle length. Less Time and More Time options are available with

Time Cycles only. NOTE: Not all options and settings are available with all cycles.

The default cycle settings will illuminate based on the cycle selected. See "Cycle Guide". For some cycles, you may select

alternate settings by pressing the button for that setting. NOTE: Not all options and settings are available with all cycles.

7. Press START/PAUSE to begin cycle

START/PAUSE

Press the START/PAUSE button to begin the cycle.

g the dryer location

Wet

Damp

Cool Down

Dry

Wrinkle Guard

Check Lint Screen

Promptly remove garments after cycle has completed to reduce wrinkling. Use the Wrinkle Guard TM feature to avoid

wrinkling when you are unable to remove a load from the dryer as soon as it stops.

DRYER CARE

g accumulated lint

From inside the Dryer Cabinet

Lint should be removed every 2 years, or more often,

depending on dryer usage. Cleaning should be done

by a qualified servicer.

From the Exhaust Vent

Lint should be removed every 2 years, or more often,

depending on dryer usage.

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer,

Place dryer at least 18 inches (460 ram) above the floor

for a garage installation.

Failure to do so can result in death, explosion, or fire.

g the dryer interior

To cleon dryer drum

I. Apply a liquid, nonflammable household cleaner to the

stained area of the drum and rub with a soft cloth until stain is removed.

2. Wipe drum thoroughly with a damp cloth.

3. Tumble a load of clean cloths or towels to dry the drum. NOTE: Garments that contain loose dyes, such as denim blue

jeans or brightly colored cotton items, may discolor the dryer interior. These stains are not harmful to your dryer and will

not stain future loads of clothes. Dry these items inside out to avoid drum staining.

Cleaning the lint screen

Vacation, storage, and moving care

Every load cleanlng

The lint screen is located in the dryer. A screen blocked

by lint can increase drying time.

To clean:

1. Pull the lint screen out of its holder. Roll lint off: the screen with your fingers. Do not rinse or wash screen

to remove lint.

2. Push the lint screen firmly back into place.

iMPORTANT:

[] Do not run the dryer with the lint screen loose, damaged,

biocked, or missing. Doing so can cause overheating and

damage to both the dryer and fabrics.

[] if lint falls off: the screen into the dryer during removal,

check the exhaust hood and remove the lint. See

"Venting Requirements" in your "installation instructions".

As needed cleanlng

Laundry detergent and fabric softener residue can build up

on the lint screen. This buildup can cause longer drying times for your clothes, or cause the dryer to stop before your load

is completely dry. The screen is probably clogged if lint falls

off: while the screen is in the dryer.

Clean the lint screen with a nylon brush every 6 months_

or more frequently, if it becomes clogged due to a residue

buildup.

To wash:

1. Roll lint off: the screen with your fingers.

2. Wet both sides of lint screen with hot water.

3. Wet a nylon brush with hot water and liquid

detergent. Scrub lint screen with the brush to

remove residue buildup.

install and store your dryer where it will not freeze, if storing or moving your dryer during freezing weather, winterize it.

Non=Use or Storage Care

Operate your dryer only when you are at home. if you wili be on vacation or not using your dryer for an extended

period of time, you should:

1. Unplug dryer or disconnect power.

2. (For gas dryers only): Close shutoff: valve to gas supply line.

3. Clean lint screen. See "Cleaning the Lint Screen."

Moving Care

For power supply cord-connected dryers:

1. Unplug the power supply cord.

2. Make sure leveling legs are secure in dryer base.

3. Use tape to secure dryer door.

Electrical Shock Hazard

Disconnect power before servicing. Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

For direct-wired dryers:

1. Turn off: power at fuse or breaker box.

2. Disconnect wiring.

3. Make sure leveling legs are secure in dryer base.

4. Use tape to secure dryer door.

4. Rinse screen with hot water.

5. Thoroughly dry lint screen with a clean towel. Reinstall screen in dryer.

For gas dryers:

1. Unplug or disconnect power to dryer.

2. Close shutoff: valve to gas supply line.

3. Make sure leveling legs are secure in dryer base.

4. Use tape to secure dryer door.

Reinstalllng the Dryer

Follow the "installation Instructions" to Iocate_ level_ and connect the dryer,

the Heated Drying Rack

Changing the drum light (on some models)

Use the Heated Drying Rack for items that you do not want to tumble dry, such as sweaters. When you use the heated

drying rack, the heated air inside the dryer flows in a concentrated pattern to allow efficient and uniform drying.

NOTE: Do not remove lint screen.

1. Open dryer door.

2. Slide dryer rack over the bottom of the dryer door opening. Push down to secure it on the frame.

3. Place wet items on top of the rack. Allow space around items for air to circulate. The rack does not move, but

the drum will rotate. Make sure items do not hang over the edges or between rack grill.

4. Close dryer door.

5. Turn cycle knob to Time Dry.

6. Select a Dry Temp to match the fabrics in your load. Items containing foam, rubber, or plastic must be dried

on a clothesline or by using Air Only. See "Cycle Guide".

7. Use TIME DRY to select the desired time. Select a time by pressing MORE TIME or LESS TIME. Reset time as

needed to complete drying. See "Cycle Guide".

8. Start the dryer. To remove the drying rack, lift it straight up and out

of the dryer.

NOTE: Check the lint screen and remove any lint

accumulated from items dried on the rack.

1. Unplug dryer or disconnect power.

2. Open the dryer door. Locate the light bulb cover on the

back wall of the dryer. Using a Phillips head screw driver, remove the screw located in the lower right-hand corner of the cover. Remove the cover.

3. Turn bulb counterclockwise. Replace the bulb with a 10-watt appliance bulb only. Replace the cover

and secure with the screw.

4. Plug in dryer or reconnect power.

Changing the EvenHeat TM Auto Dry Cycle Settings to increase Drying Time

If all your loads on all Auto Dry cycles are consistently not as dry as you would like, you may change the default settings to increase the default dryness level.

Your Auto Dry settings can be adjusted to adapt to different installations, environmental conditions or personal

preference. This change Jsretained and will affect all of your Auto Dry cycles, not just the current cycle!load.

There are 3 drying settings, which are displayed using the Cycle Status light (Wet, Damp, Cool Down LEDs)

1 Factory preset dryness level. 2 Slightly drier clothes, 15% more drying time.

3 Much drier clothes, 30% more drying time.

To change the drying settings (on some models):

NOTE: The settings cannot be changed while the dryer is running or paused. The dryer must be in standby mode

(the Power button is off:) to adjust the default settings.

1. Before starting a cycle, press and hold the DRY TEMP button for 6 seconds.

2. Press the DRY TEMP button to select the dryness level shown in the cycle status light display: Wet light

on : level 1, Wet and Damp lights on : level 2, and Wet, Damp and Cool Down lights on : level 3.

3. Press START/PAUSE to save the new dryness level

setting.

TROUBLESHOOTING

If you experience Possible Causes Solution

Clothes are not drying Lint screen clogged with lint. Lint screen should be cleaned before each load. satisfactorily, drying

times are too long. Has the Air Only cycle been Select the right cycle for the types of garments being dried.

selected? See "Cycle Guide".

Load too large and heavy to dry Separate the load to tumble freely. quickly.

Exhaust vent or outside exhaust Run the dryer for 5-10 minutes. Hold your hand under the hood clogged with lint, restricting outside exhaust hood to check air movement. If you do not feel

air movement, air movement, clean exhaust system of lint or replace exhaust

vent with heavy metal or flexible metal vent. Make sure vent is not crushed or kinked. See "Installation Instructions".

Fabric softener sheets blocking Use only one fabric softener sheet, and use it only once. the grill.

Exhaust vent not the correct length. Check that the exhaust vent is not too long or has too many

turns. Long venting will increase drying times. Make sure vent is not crushed or kinked. See "installation Instructions".

Exhaust vent diameter not the Use 4" (102 mm) diameter vent material.

correct size.

Dryer located in a room with Proper operation of dryer cycles requires temperatures above

temperature below 45°F (7°C)? 45°F (7°C). Dryer located Jn a closet without Closet doors must have ventilation openings at the top and

adequate openings, bottom of the door. The front of the dryer requires a minimum

of 1" (25 ram) of airspace, and, for most installations, the rear of the dryer requires 5" (127 ram). See "installation Instructions".

Dryer wJJJnot run Door not closed completely. Make sure the dryer door is closed completely.

START/PAUSE button not pressed Press and Hold the Start/Pause button until you hear the dryer firmly or held long enough, drum moving.

Household fuse is blown or circuit Electric dryers use 2 household fuses or circuit breakers. The breaker has tripped, drum may be turning, but you may not have heat. Replace both

Incorrect power supply. Electric dryers require 240-volt power supply.

Wrong type of fuse. Use a time-delay fuse.

Unusual sounds Dryer had a period of non-use. If the dryer hasn't been used for awhile, there may be a

Is a coin, button, or paper clip Check the front and rear edges of the drum for small objects.

caught between the drum and front Clean out pockets before laundering. or rear of the dryer?

Is it a gas dryer? The gas valve clicking is a normal operating sound.

Are the four legs installed, and is the The dryer may vibrate if not properly installed. dryer level front to back and side to See the Installation Instructions.

side?

Clothing knotted or balled up. When balled up, the load will bounce, causing the dryer

No heat Household fuse is blown or circuit The drum may be turning, but you may not have heat. Electric

breaker has tripped, dryers use 2 household fuses or circuit breakers. Replace both

Supply line valve not open. For gas dryers, be sure the valve on the supply line is open.

fuses or reset the circuit breaker. If the problem continues, call an electrician.

Check with a qualified electrician.

thumping sound during the first few minutes of operation.

to vibrate. Separate the load items and restart the dryer.

fuses or reset the circuit breaker. If the problem continues, call an electrician.

Incorrect power supply. Electric dryers require 240-volt power supply.

Check with a qualified electrician, j

TROUBLESHOOTING cont.

Ifyou experience Possible Causes

Cycle time too short Automatic cycle ending early.

Lint on load

Stains on load or drum

Loads are wrinkled Was the load not removed from Select Wrinkle Guard TM feature to tumble the load without heat

Odors Have you recently been painting, If so, ventilate the area. When the odors or fumes are gone from

Load is too hot i Were laundry items removed from Allow Cool Down to finish before removing laundry from dryer.

k,. j

Lint screen clogged.

Dryer fabric softener not properly

used.

dryer at the end of the cycle? to avoid wrinkling. Dryer overloaded. Dry smaller loads that can tumble freely reduce wrinkles from

i staining, or varnishing in the area the area, rewash and dry the clothing. i where your dryer is located?

Is the electric dryer being used for The new electric heating element may have an odor. The odor

i the first time? wJJJbe gone after the first cycle.

j the dryer before the end of the All cycles are cooled slowly to reduced wrinkling and make it

cycle? easier to handle. Items removed before Cool Down may feel

Was a high temperature cycle Select a lower temperature, and use an automatic drying cycle. used or was Dry Temp set on high? These cycles sense the temperature or the moisture level in the

The load may not be contacting the sensor strips.Levelthe dryer.

Use Time Dry for very small loads.Change the Dry Level

setting on Auto Dry Cycles.

increasing or decreasing the Dry Level setting will change the amount of drying time in a cycle, if loads are consistently ending too early, see "Changing the EvenHeat TM Auto Dry Cycle Settings to increase Drying Time".

Lint screen should be cleaned before each load.

Add dryer fabric softener sheets at the beginning of the cycle. Fabric softener sheets added to a partially dried load can stain

your garments. Drum stains are caused by dyes in clothing (usually blue jeans).

These wJJJnot transfer to other clothing.

forming.

very warm.

load and shut off when the load reaches the selected dryness. This reduces overdrying.

Solution

PROTECTION AGREEMENTS

Master Protection Agreements

Congratulations on making a smart purchase. Your new

Kenmore ® product is designed and manufactured for years

of dependable operation. But like all products, it may require preventive maintenance or

repair from time to time. That's when having a Master Protection

Agreement can save you money and aggravation. The Master Protection Agreement also helps extend the life of your

new product. Here's what the Agreement _ includes:

Parts and labor needed to help keep products operating

properly under normal use, not just defects. Our coverage goes well beyond the product warranty. No deductibles, no functional failure excluded from coverage-- real protection.

Expert service by a force of more than 10,000 authorized Sears service technicians, which means someone you can trust will be working on your product.

Unlimited service calls and nationwide service, as often as you want us, whenever you want us.

"No-leman" guarantee - replacement af your covered product if four or more product failures occur within twelve

months.

Product replacement if your covered product can't be fixed. Annual Preventive Maintenance Check at your request - no

extra charge.

Fast help by phone - we call it Rapid Resolution - phone support from a Sears representative on all products. Think

of us as a "talking owner's manual."

Power surge protection against electrical damage due

to power fluctuations.

Rental reimbursement if repair of your covered product takes longer than promised.

10°/0 discount off: the regular price of any non-covered repair service and related installed parts.

Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service appointment online.

The Master Protection Agreement is a risk free purchase.

If you cancel for any reason during the product warranty period, we will provide a full refund. Or, a prorated refund anytime after the product warranty period expires. Purchase your Master

Protection Agreement today!

Some limitations and exclusions apply. Far prices and additional information in the U.S.A. call 1-800-827-6655.

_Caverage in Canada varies an some items. Far full details call Sears Canada at 1-800-361-6665.

Sears Installation Service

For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items,

in the U.S.A. or Canada call 1-800-4-MYaHOME ®.

KENMORE APPLIANCE WARRANTY

ONE YEAR LIMITED WARRANTY

When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800a4_MY-HOME to arrange for free repair.

If this appliance is used for other than private family purposes, this warranty applies for only 90 days from the date of purchase.

THIS WARRANTY COVERS ONLY DEFECTS IN MATERIAL AND WORKMANSHIP. SEARS WILL NOT PAY FOR:

Expendable items that can wear out from normal use, including but not limited to filters, belts, light bulbs, and bags.

A service technician to instruct the user in correct product

installation, operation or maintenance.

A service technician to clean or maintain this product.

4. Damage to or failure of this product if it is not installed, operated or maintained according to all instructions supplied

with the product.

5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended purpose.

6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than those recommended in all instructions supplied with the product.

7. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

Customer's sole and exclusive remedy under this limited warranty shall be product repair as provided herein. Implied warranties, including warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law. Sears shall not be liable for incidental or consequential damages. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitations on the duration of implied warranties of merchantability or fitness, so these exclusions or limitations may not apply to you.

This warranty applies only while this appliance is used in the United States and Canada.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Ca.

Haffman Estates, IL 60179

Sears Canada inc.

Toronto, Ontario, Canada M5B 2B8

+ 30 hidden pages