Please read this guide. It will help you assemble and operate your new Kenmore vacuum in the
safest and most effective way.
For more information about the care and operation, call your nearest Sears store.
Your will need the complete model and serial numbers when requesting information.
Your vacuum’s model and serial numbers are located on the Model and Serial Number Plate.
Use the space below to record the model number and serial number of your new Kenmore vacuum.
Model No____________________________________________________________________________
Serial No._
Date of Purchase -
Keep this book and your sales check (receipt) in a safe place for future reference.
8
KENMORE VACUUM CLEANER WARRANTY
ONE YEAR FULL WARRANTY ON KENMORE VACUUM CLEANER
When assembled, operated and maintained according to the Use and Care Guide, if this vacuum cleaner
fails due to a defect in material or workmanship within one year from the date of purchase, RETURN IT TO
ANY SEARS STORE OR SEARS PARTS & REPAIR CENTER FOR FREE REPAIR (or replacement if
repair proves impossible).
This warranty is void if this vacuum cleaner is ever used for commercial or rental purposes.
This warranty excludes vacuum bags, belts, light bulbs, and filters, which are expendable parts that can
wear out from normal use before the end of the warranty year.
This warranty covers only defects in material and workmanship. Sears will NOT pay for:
1. An on-site service technician to instruct the user in correct product installation, operation or maintenance.
2. A service technician to clean or maintain this product.
3. Damage to or failure of this product if it Is not installed, operated or maintained according to the Installation
Instructions and Use and Care Guide.
4. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended
purpose.
5. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils
other than those recommended in the Use and Care Guide.
6. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.
This warranty applies only while this appliance is used in the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 81 TWA, Hoffman Estates, IL 60179
-2-
IMPORTANT SAFETY INSTRUCTIONS
A
WARNING
Your safety is important to us. To reduce the risk of fire, electrical shock, injury to
persons or damage when using your vacuum cleaner, follow basic safety precautions
including the following:
Read this manuai before assembling or using
your vacuum cleaner.
Use your cleaner only as described in this
manual. Use only with supplied attachments.
To reduce the risk of electrical shock - Do not
use outdoors or on wet surfaces.
Disconnect electrical supply before servicing
or cleaning out brush area. Failure to do so
could result in electrical shock or brush
suddenly starting.
Always turn cleaner off before connecting or
disconnecting the hose.
Always turn cleaner off before unplugging.
Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
Hold plug when rewinding onto cord reel.
Do not allow plug to whip when rewinding.
Do not use with damaged cord or plug. If
cleaner is not working as It should, has been
dropped, damaged, left outdoors, or dropped
into water, return it to a service center.
Do not pull or carry by cord, use cord as a
handle, close door on cord, or pull cord around
sharp edges or corners. Do not run cleaner over
cord. Keep cord away from heated surfaces.
Do not leave cleaner when plugged in. Unplug
from outlet when not In use and before servicing.
Do not allow to be used as a toy. Close attention
is necessary when used by or near children.
Do not handle plug or cleaner with wet hands.
To reduce the risk of fire, electric shock, or injury:
Do not operate the cleaner with a punctured
hose. Replace if cut or worn. Avoid vacuuming
sharp objects.
Do not use with any opening blocked; keep
free of dust, lint, hair and anything that may
reduce air flow.
Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
Do not use cleaner without dust bag and/or
filters in place.
Always change the dust bag after vacuuming
carpet cleaners or freshener, powders and fine
dust. These products clog the bag, reduce
airflow and can cause the bag to burst. Failure
to change bag could cause permanent damage
to the cleaner.
Do not use the cleaner to pick up sharp hard
objects, small toys, pins, paper, etc. They may
damage the cleaner or dust bag.
Do not pick up anything that is burning or smoking,
such as cigarettes, matches, or hot ashes.
Do not use vacuum cleaner
to pick up flammable or combustible liquids
(gasoline, cleaning fluids, perfumes, etc.), or use
in areas where they may be present. The fumes
from these substances can create a fire hazard
or explosion.
Use extra care when cleaning on stairs. Do not
put on chairs, tables, etc. Keep on floor.
You are responsible for making sure that your
vacuum cleaner is not used by anyone unable
to operate it properly.
SAVE theseinstructions
Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your
cleaner is intended only for household use. Read this Owner’s Manual carefully for
important use and safety information. This guide contains safety statements under warning
and caution symbols. Please pay special attention to these boxes and follow any
instructions given.
shock, burns and serious personal injury. CAUTION statements alert you to such hazards as
moderate personal injury and/or property damage.
WARNING statements alert you to such hazards as fire, electrical
PARTS AND FEATURES
It is Important to know your vacuum cleaner’s parts and features to assure its proper and
safe use. Review these before using your cleaner.
Air Flow regulator
Telescopic Wand
- Rug/Floor Nozzle
Cord Reel Button
Exhaust Cover
Power Switch
(ON/OFF)
Power Cord
(Not Shown)
ASSEMBLY
Before assembling your vacuum cleaner, be
sure you have all the parts shown in PARTS
AND FEATURES.
TELESCOPIC WAND
Push the knob and pull out wand to required
length.
RUG/FLOOR NOZZLE
1. Insert wand into rug/floor nozzle.
CANISTER
1. Open the canister hood.
2. Check to see that the dust bin is properly
Installed. See CLEANING THE DUST BIN
AND WASHABLE FILTER for instructions.
3. Check to see that the motor safety filter is
properly installed. See CLEANING MOTOR
SAFETY FILTER for instructions.
HOSE
Fitting Hook
2. Push floor selector switch back for bare floor
and forward for carpet. Brushes should be
down for bare floor and up for carpet.
1. Insert hose into canister until it snaps into
Bare Floor
Clamp Accessory Holder around upper Pipe
as shown.
Carpet
2. Insert wand into handle by twisting slightly.
To remove handlePull up on handle by
place.
To remove hose : Press hose fitting hook
and pull upwards.
twisting slightly.
USE AND CARE
HOW YOUR VACUUM WORKS
The vacuum cleaner creates suction that
picks up dirt. Rapidly moving air carries
the dirt to the dust bin through the air flow
passages. The dust bin lets the air pass
through, while it traps the dirt. For best
cleaning results, keep the airflow passage
open. Check the starred areas
occasionally for clogs. Unplug from outlet
before checking.
HOW TO START YOUR VACUUM
NOTE: To reduce the r-sk o- elecrric shock, this
A
1. Pull out the power cord to the desired length.
WARNING
Personal Injury and Product Damage Hazard!
• DO NOT plug in If switch is in ON position.
Personal injury or product damage could result.
• The cord moves rapidly when rewinding.
Keep children away and provide a clear path when
rewinding the cord to prevent personal injury.
■ DO NOT use outlets above counters. Damage to
items in surrounding area could occur.
When you unwind the cord, you will see a
yellow and a red mark. The red mark is at the
very end of the cord, the yellow mark is 28
inches from the cord end.
vacuum cleaner has a polarized plug; one blade is
wider than the other. This plug will fit in a polarized
outlet only one way. If the plug does not fit fully inthe
outlet, reverse the plug. If It still does not fit, contact a
qualified electrician to install the proper outlet. Do not
change the plug in any way.
2. Plug the polarized power cord into a 120 Volt
3. To start, press power
outlet located near the floor.
To rewind; Unplug the cleaner. Hold the plug
while rewinding to prevent damage or injury
from the moving cord. Press on the cord reel
button to rewind the cord.
switch. To stop,
press power
switch again.
Power Switch Knob
-6-
ATTACHMENTS
ATTACHMENTS ON HANDLE
1. Remove wand from handle by twisting
slightly.
2. Push new attachment tool onto handle.
ATTACHMENT USE CHART
ATTACHMENTS ON WANDS
Put on attachments as needed.
See chart below.
AI lACHrVltNI
DUSTING
BRUSH
UPHOLSTERY
NOZZLE
CREVICE TOOL
RUG/FLOOR^-,^
NOZZLE
' Always clean attachments before using on fabrics.
Furniture*
Between
Cushions*
XXX
XX
X])C
CLEANING AREA
Drapes*Stairs
Bare
Floors
Carpeted
Floors/Rugs
Walls
XXXX
VACUUMING TIPS
Suggested sweeping pattern
For best cleaning action, the rug/floor nozzle
should be pushed straight away from you and
pulled straight back.
This pattern should be continued across the rug
with slow, gliding motions.
NOTE: Fast, jerky strokes do not provide
complete cleaning.
Carpeted stairs need to be vacuumed
regularly.
For best cleaning results, keep the airflow
passage open. Check occasionally for clogs.
See HOW YOUR VACUUM WORKS section.
Unplug from outlet before checking.
PERFORMANCE FEATURES
SUCTION CONTROL
The handle air flow regulator allows you to
change fhe vacuum suction for different fabric
and carpet weights.
Adjust the suction power with Air Flow
Regulator in the handle.
PERFORMANCE INDICATOR
When the unit is running, the indicator will be
clear if there are no clogs.
When the indicator turns completely red, check
If the dust bln is full or if other areas are
clogged. See HOW YOUR VACUUM WORKS.
Indicator
HOSE SWIVEL
The hose swivel prevents the hose from
twisting. This is helpful for cleaning in small
areas.
NOTE: Indicator may turn red when using
attachments or when cleaning new carpet. This
is due to reduced airflow caused by the vacuum
seal between attachment and surface, or new
carpet fuzz filling the dust bin quickly. Restore
airflow by raising attachment slightly from
surface you are cleaning, or empty dust bin if it
is full.
-8-
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.