Karcher T350 Owner's Manual
T 350
T-Racer
12" Hard Surface Cleaner
Designed for gasoline pressure washers
with screw-on trigger guns up to 2650 PSI.
12" Lavador de superficies duras
Para lavadoras de presión a gasolina a 2650 PSI.
12" Nettoyeur de surface dure
Adaptable aux nettoyeurs haute pression avec
moteur à essence d´une puissance a 2650 lb/po2.
2.641–005.0
English ................. 2
Español ................ 8
Français ............. 14
5.961–521.0 (01/12)
T 350 OVERVIEW
Item Description
1 Nozzle height adjustment
2 Hand grip
3 Air flow control (hovering effect)
2
Item Description
4 Housing
5 Handle (2 piece)
6 Adaptor
Customer Support USA and Canada
In the U.S. or Canada, please call 1-800-537-4129 for warranty issues and
visit www.karcher-help.com for technical support and product assistance.
Customer Support Mexico
Call: 01-800-024-13-13 for help or visit our website:
www.karcher.com.mx
IMPORTANT SAFETY INSTRUCTIONS
WARNING – When using this
product basic precautions should
always be followed, including the
following:
Read all the instructions before
using the product.
Please observe the safety instructions of your pressure washer.
The T-Racer must not be used by
children.
Only trigger the gun of the pressure
washer if the T -Racer is located on
the surface to be cleaned.
Keep all persons/animals clear of
the immediate vicinity of the
cleaning head.
Keep hands away from moving
parts.
Turn off the pressure washer when
examining or changing the TRacer and after the completion of
the cleaning operation.
Maximum water temperature
allowed is 140 °F/ 60 °C. Please
follow the instructions for your
pressure washer.
CAUTION!
• Do not use on windows.
• The T-Racer is not suited for
scouring or scrubbing!
• Do not run over freestanding
corners!
• For the optimum setting, test the
T–Racer in an inconspicuous area.
• Never operate in the same area
for more than 2 seconds, damage
may occur.
Intended Use
The T 350 T-Racer can be used with
all Kärcher gasoline pressure washers with 2400 to 2650 PSI and most
other gasoline pressure washers with
screw-on trigger guns up to 2650 PSI
(with included adaptor).
Use on horizontal surfaces like driveways, patios, side walks, etc.
Use on vertical surfaces like brick
walls, hardiplank, stucco and other
siding. (Always test in inconspicuous
area first.)
3
– SAVE THESE INSTRUCTIONS –
The T350 has not been designed for
commercial use. Commercial users
should consider Kärcher`s FR 30
Hard Surface Cleaner
ASSEMBLY INSTRUCTIONS
Step 1
• Insert upper handle into the lower
handle by twisting together.
4
Step 3
For Kärcher with male screw-on
trigger gun.
• Insert male screw-on trigger gun
into upper handle.
• Turn collar clockwise until tight.
Step 2
• Insert lower handle into main
housing.
• Turn collar clockwise until tight.
Step 3
For female screw-on trigger gun.
• Screw adaptor on female screwon trigger gun.
• Insert trigger gun with adaptor into
upper handle.
• Turn collar clockwise until tight.
Cleaning vertical surfaces
• Connect the T-Racer directly with the trigger gun.
OPERATION CONTROLS
Spray Power
Adjust height of propeller spray head.
For sensitive surfaces
• Turn nozzle height adjustment
clockwise.
For hard surfaces
• Turn nozzle height adjustment
counterclockwise.
Please Note:
Air Flow Control
Adjust the hovercraft effect of the
T-Racer by pushing the Air Flow Control into one of the positions from “No
hovercraft effect” to “Full hovercraft
effect”.
No hovercraft effect
(Air flow vents closed)
• Push counterclockwise to the
stop.
Full hovercraft effect
(Air flow vents opened)
• Push clockwise to the stop.
5
• For optimum setting test the T-Racer in an inconspicuous area first.
• Never operate in the same area for more than 2 seconds, damage
may occur.
• Do not use on windows.
APPLICATION DIRECTIONS
Suggested Settings for Typical Applications
Horizontal Wood and Decks
• Adjust height of the spray
head clockwise.
• Open the air flow vents.
Vertical Wood, Siding and Facades
• Connect the T-Racer directly
with the trigger gun.
• Adjust height of the spray
head clockwise.
• Close the air flow vents.
Do not use on windows.
6
Horizontal Tile, Concrete and Stone
• Adjust height of the spray
head counterclockwise.
• Open the air flow vents.
Vertical Tile, Concrete and Stone
• Connect the T-Racer directly
with the trigger gun.
• Adjust height of the spray
head counterclockwise.
• Close the air flow vents.
Cleaning of vertical surfaces:
Always hold Trigger Gun and T-Racer with both hands.
Do not reach under the edge of the T-Racer while the device is in operation.
REPLACEMENT OF THE NOZZLES
Note: The nozzles must be
removed for cleaning or for the
exchange of the nozzles.
1. Remove the clamp.
2. Pull out the old nozzle.
3. Insert the new nozzle.
4. Secure nozzle with clamp.
7
T 350 VISIÓN GENERAL
ítem Descripción
1 Ajuste de la altura de la boquilla
2 Empuñadura
3 Control del flujo de aire (efecto
de suspensión)
8
ítem Descripción
4 Carcasa
5 Mango (2 piezas)
6 Adaptador
Ayuda a clientes EE.UU. y Canadá
En EE.UU: o Canadá, llame al 1-800-537-4129 para temas de garantía y visite
www.karcher-help.com para el servicio técnico y asesoramiento sobre produc-
tos.
Soporte México
Llame al: 01-800-024-13-13 si necesita ayuda o visite nuestra página Web:
www.karcher.com.mx
Loading...