Kambrook - Australia |
Kambrook - New Zealand |
Building 2, Port Air Industrial Estate |
Private Bag 94411 |
1A Hale Street |
Botany, Manukau |
Botany NSW 2019 |
Auckland 2163 |
Australia |
New Zealand |
Customer Service Line 1300 139 798 |
Customer Service Line/ |
Customer Service Fax 1800 621 337 |
Spare Parts 0800 273 845 |
www.kambrook.com.au |
Customer Service Fax 0800 288 513 |
|
www.kambrook.co.nz |
Due to continual improvement in design or otherwise, the product you purchase may differ slightly from the illustration in this book. Issue A14
INSTRUCTION BOOKLET Suits all KBL330/KBL340 models
Important
Please retain your instruction book for future use.
In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 0800 273 845 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.au or www.kambrook.co.nz
Contents
Kambrook Recommends |
p4 |
Safety First |
|
Your Kambrook Blender |
p6 |
Operating Your Kambrook |
p7 |
Blender |
|
Hints and Tips |
p11 |
Care, Cleaning and Storage |
p13 |
Recipes |
p14 |
Kambrook Recommends Safety First
IMPORTANT: Please retain your instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Blender
•Carefully read all instructions before operating the blender for the first time and save for future reference.
•Remove and safely discard any packaging material and promotional labels before using the blender for the first time.
•To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this blender.
•Do not place the blender near the edge of a bench or table during operation. Ensure the surface is level, clean and free of water and other substances. Vibration during operation may cause the blender to move.
•Do not use the blender on a sink drain board.
•Do not place the blender on or near a hot gas or electric burner, or where it could touch a heated oven.
•Handle the blender and attachments
with care – remember the blades are razorsharp and should be kept out of the reach of children.
•Always ensure the blender is completely assembled before operating. The blender will not operate unless properly assembled.
•Do not use attachments other than those provided with the blender.
•Do not attempt to operate the blender by any method other than those described in this booklet.
•Always secure the blade assembly onto the blender jug before attaching to the motor base.
•Ensure the Speed Control Dial is in the ‘OFF’ position and the blender is switched off
at the power outlet and the power cord is unplugged before attaching the blender jug.
•Always operate the blender with the blender jug lid in position.
•Keep fingers, hands, knives and other utensils away from moving blades.
•Do not place hands or fingers into the blender jug unless the motor and blades have come to a complete stop. Ensure the Speed Control Dial is in the ‘OFF’ position and the blender is switched off at the power outlet and the power cord is unplugged before removing the lid from the blender.
•Ensure the motor and the blades have completely stopped before disassembling. Ensure the Speed Control Dial is in the ‘OFF’ position and the blender is switched off
at the power outlet and the power cord is unplugged from the power outlet before attempting to move the blender, when not in use, if left unattended and before disassembling, cleaning or storing.
4
•Care should be taken when removing the food from the blender jug by ensuring the motor and the blades have completely stopped before disassembling.
Ensure the Speed Control Dial is turned to the ‘OFF’ position, the appliance is switched off at the power outlet and unplugged, before removing the lid from the blender jug. The blender jug should then be unlocked from the motor base and the food carefully removed before attempting to remove the blade assembly.
•Do not operate the blender continuously for periods longer than 1 minute on any setting or if processing a heavy load. None of the recipes in this book are considered a heavy load. If the blender is operated continuously for too long, it should be allowed to rest for 30 minutes before recommencing.
•Do not process hot or boiling liquids – allow liquids to cool before placing into the blender jug.
•Always switch off the blender and disconnect from the power outlet before changing accessories or approaching parts that move in use.
•Do not move the blender whilst in operation.
•Do not leave the blender unattended when in use.
•Do not place any part of the blender in a microwave oven.
•Do not wash any parts of the blender in a dishwasher.
•Do not place anything on top of the motor base and/or blender jug when the lid is on or off, when in use and when stored.
•Do not allow children to use the blender without supervision.
•Care should be taken when handling the sharp cutting blades, emptying the blender jug and during cleaning.
•Keep the blender clean. Follow the cleaning instructions provided in this book.
Important Safeguards For All Electrical
Appliances
•Fully unwind the power cord before use.
•Connect only to a 230V or 240V power outlet.
•Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted.
•To protect against electric shock, do not immerse the power cord, power plug or appliance in water or any other liquid or allow moisture to come in contact with the part, unless it is recommended in the cleaning instructions.
•The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the appliance.
•It is recommended to regularly inspect the appliance. To avoid a hazard, do not use the appliance if power cord, power plug or appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Kambrook Service Centre for examination and/or repair.
•Any maintenance other than cleaning should be performed at an authorised Kambrook Service Centre.
•This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use in moving
vehicles or boats. Do not use outdoors.
Misuse may cause injury.
•The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable
that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.
•Always turn the appliance to the OFF position, switch off at the power outlet and unplug at the power outlet when the appliance is not in use.
•Before cleaning, always turn the appliance to the OFF position, switch off at the power outlet, unplug at the power outlet and remove the power cord, if detachable, from the appliance and allow all parts to cool.
•Do not place this appliance on or near a heat source, such as hot plate, oven or heaters.
•Position the appliance at a minimum distance of 20cm away from walls, curtains and other heat or steam sensitive materials and provide adequate space above and on all sides for air circulation.
5
Your Kambrook Blender
1.Powerful 600 watt motor
2.Large 1.5 litre glass jug with measurements
3.2 speed control plus Pulse function
4.Ice Crush button for icy drinks
5.Removable Blade Holder with serrated blades and silicone seal located under the glass jug
4
8
KBL330WHT Model Shown
6.Serrated stainless steel blades for ice crushing
7.Jug chute and inner measuring cap
(Note: the inner measuring cap is also a handy tool for assisting in removing the blade holder)
8.Sturdy non-slip feet
Not Shown
•Jug collar
(Note: found under the blender jug and cannot be removed)
6
Operating Your Kambrook Blender
Before First Use
Remove and safely discard any packaging material and promotional labels. Disassemble the blender jug by following the steps in the ‘Disassembling the Blender’ section below. Wash the lid, inner measuring cap, blender jug, silicone seal and Removable Blade Holder in warm, soapy water with a soft cloth. Rinse and dry thoroughly.
Wipe the motor base with a damp cloth and dry thoroughly.
Disassembling the Blender
1.Place the motor base on a flat, dry surface such as a bench top. Ensure that the Speed Control Dial is in the ‘OFF’ position, the appliance is switched off at the power outlet and the power cord is unplugged.
2.Lift the blender jug out of the motor base to remove.
3.Remove the lid and inner measuring cap from the blender jug.
4.Place the jug upside down on a flat, dry surface such as a bench top.
5.Using the inner measuring cap, insert the two tabs on the inner measuring cap into the Removable Blade Holder (See Fig. 1).
Fig. 1
6.Use one hand to hold the jug handle and the other hand to turn the inner measuring
cap clockwise to ‘
’ the Removable Blade Holder (See. Fig. 2).
Fig. 2
7.Once loose, tilt the Removable Blade Holder at an angle and lift it up and out of the jug body.
WARNING: Blades must be handled carefully as they are sharp!
7
Loading...