JVC KW-NX7000 User manual

NAVIGATION/DVD RECEIVER

СИСТЕМА НАВИГАЦИИ/ПРИЕМНИКПРОИГРЫВАТЕЛЬ DVD

KW-NX7000

For canceling the display demonstration, see page 9. Информацию об отмене демонстрации функций дисплея см. на стр. 9.

ENGLISHРУCCKИЙ

For installation and connections, refer to the separate manual. Указания по установке и выполнению соединений приводятся в отдельной инструкции.

INSTRUCTIONS

ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ

LVT1840-001A

[EE]

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

Thank you for purchasing a JVC product.

possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

ENGLISH

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to

qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical

instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

WARNINGS: To prevent accidents and damage

• DO NOT install any unit or wire any cable in a location where;

– it may obstruct the steering wheel and

gearshift lever operations.

– it may obstruct the operation of safety devices

such as air bags.

– it may obstruct visibility.

• DO NOT operate the unit while driving.

If you need to operate the unit while driving, be

sure to look around carefully.

• The driver must not watch the monitor while driving.

• If the parking brake is not engaged, “Parking Brake” flashes on the monitor, and no playback picture will be shown.

– This warning appears only when the parking

brake wire is connected to the parking brake system built in the car (refer to the Installation/Connection Manual).

Cautions on the monitor:

• The monitor built in this unit has been produced with high precision, but it may have some ineffective dots. This is inevitable and is not malfunction.

• Do not expose the monitor to direct sunlight.

• Do not operate the touch panel using a ball-point pen or similar tool with the sharp tip.

Touch the buttons on the touch panel with your

finger directly (if you are wearing a glove, take it off).

• When the temperature is very cold or very hot...

– Chemical changes occur inside, causing

malfunction.

– Pictures may not appear clearly or may move

slowly. Pictures may not be synchronized with the sound or picture quality may decline in such environments.

For safety...

• Do not raise the volume level too much, as this will block outside sounds, making driving dangerous.

• Stop the car before performing any complicated operations.

[European Union only]

Every time you turn on the unit or attach the monitor panel with the ignition switch turned on, the screen below appears. Pay sufficient attention when operating the unit and make sure of safe driving.

This unit functions properly only when the speed signal lead is connected (refer to the Installation/ Connection Manual).

How to reset your unit

ENGLISH

Temperature inside the car...

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

Notes on the SD slot for System updating:

The SD slot marked below is for System updating. To update the System, ☞ page 18.

• Do not remove the cover in any case other than

updating the System.

SD slot for system updating

• Your preset adjustments will also be erased.

How to forcibly eject a disc

Press and hold OPEN/TILT while holding /ATT.

[Hold] [Hold]

• If this does not work, reset the unit.

INTRODUCTION

Contents

INTRODUCTION

Before operations ........................... 5

ENGLISH

Initial settings ................................ 7

Basic operations — Monitor panel/

touch panel ................................. 10

Basic operations —

Remote controller (RM-RK250) ..... 11

Menu operations ............................ 15

NAVIGATION SYSTEM

Safety instructions for the Navigation

System ........................................ 18

Basic operations ............................. 19

Registering your home/favourite points

.................................................. 22

Starting guidance ........................... 25

Searching for a place ....................... 28

How you are guided ........................ 39

Arranging your route ...................... 43

Navigation menu items ................... 45

Additional information ................... 50

AV OPERATIONS

Common operations on AV screens ... 54

Listening to the radio ..................... 56

Disc operations ............................... 63

SD operations ................................. 78

USB operations ............................... 80

Bluetooth® operations — Mobile

phone/audio player ..................... 82

Listening to the CD changer ............. 89

Listening to the DAB tuner .............. 91

Listening to the iPod ....................... 95

Using other external components .... 99

Sound equalization ......................... 101

Assigning titles to the sources ......... 102

AV menu items ............................... 103

Additional information ................... 111

REFERENCES

Maintenance .................................. 119

Troubleshooting ............................. 120

Specifications ................................. 125

INTRODUCTION

Before operations

Map screen AV screen

Touch panel Touch panel

In the explanation, operating buttons shown on the touch panel are indicated inside [ ].

For details on the touch panel operations, see each section.

Monitor panel Monitor panel

Features of the illumination

Monitor panel buttons

The lights of the monitor panel buttons are turned off when no operation is done for about 5 seconds.

They are turned on again in the following cases: – When you touch the touch panel or move your hand

nearby* – When you use the remote controller – When a call/SMS comes in (for Bluetooth mobile

phone) – When the source is automatically changed by

receiving the Traffic Announcement/PTY programme

* Depending on the <Illumination> setting.

(☞ page 107)

The lights of the monitor panel buttons are always turned on in the following cases: – While operating buttons are displayed on the

map screen.

– While AV menu screen is displayed. – While <Source Menu> screen is displayed. – While <Open/Tilt> menu is displayed. – When <Illumination> is set to <Normal>.

(☞ page 107)

Screen

While the unit is turned on, you can turn off the screen by holding DISP.

ENGLISH

[Hold]

The screen is turned on again in the following cases: – When you touch the touch panel – When you press MAP on the monitor panel or press

DISP

– When a call/SMS comes in (for Bluetooth mobile

phone)

– When the signal from the rear view camera comes in

INTRODUCTION

Detaching/attaching the monitor panel

Detaching

1 While the unit is turned on:

ENGLISH

Open/Tilt

Open

Eject

Detach

Detach?Yes No

The monitor panel opens by about 50°.

• It closes automatically when no operation is done for about a minute.

The monitor panel is released.

Tilt +

Tilt –

Exit

Attaching plate

• The attaching plate closes automatically about 10 seconds after the monitor panel is released. Remove the monitor panel before this happens.

Soft case (supplied)

Attaching

Caution:

• Hold the monitor panel securely so as not to drop it accidentally.

• Fit the monitor panel onto the attaching plate until it is firmly locked.

Initial settings

Installation settings

When you turn on the unit for the first time, the initial setup screen appears. Follow the procedure below and make the necessary settings.

Indication language:

In this manual, English indications are used for the purpose of explanation. You can select the indication language.

~ Turn on the power.

Ÿ Select the language you want for the

display and the voice guidance.

Normally select [Start Installation Settings].

• If you select [Skip Installation Settings (for store display)], the System starts in the navigation demonstration mode for stores (☞ page 50). You need to make the settings you turn on the power next time.

ENGLISH

The power is turned off then turned on automatically so that your setting takes effect.

Continued on the next page

INTRODUCTION

⁄ Adjust the settings.

ENGLISH

@ Finish the procedure.

Country* Select the country where you

Reverse Signal Polarity

You can also change these settings through the menu screens as follows:

• Language: < (Function Menu)>

- < (Map Settings)> <System> - <Language> (☞ page 48)

• Reverse Signal Polarity: <AV Menu> - <Setup> < (Others)> - <Reverse Signal> (☞ page 107)

* You can also change the country when

searching for a destination.

are living.

Select the reverse signal polarity (<Battery> or <GND>) according to the connection of your car.

Canceling demonstration

You can cancel the demonstration on the screen.

1 Turn on the power.

If the map is displayed, switch the screen to the AV screen by pressing DISP.

Exit

4 Cancel the demonstration.

Select <Off>.

Setup

Demonstration Wall Paper Color Scroll Dimmer

Dimmer Time Set

Back Exit

5 Finish the procedure.

Setup

Demonstration Wall Paper Color Scroll Dimmer

Dimmer Time Set

Back Exit

Metal

Blue

Auto

Metal

Blue

Auto

ENGLISH

AutoOnce

718

AutoOnce

718

INTRODUCTION

Basic operations — Monitor panel/touch panel

ENGLISH

Adjusts the volume.*

• Switches to the map screen.

• Displays your current position.

• Turns on the power.

• Turns off the power. [Hold]

• Attenuates the sound (if the power is on).

Resets the unit. ☞ page 3

• Use only when the internal system malfunctions.

Also adjustable on the

VOL

touch panel (on the AV screen only): Move your

finger on the touch panel as illustrated.

*2 Each time you press DISP, the display changes to show

the various information.

The number and

AV screen 1

AV screen 2

contents of AV screens vary depending on the source.

Remote sensor

• Changes the display information.*

• Turns off the screen. [Hold]

• Operates the current source on the map screen.

• Searches for radio stations or ensembles.

• Selects tracks/chapters.

<Open/Tilt> menu

Open/Tilt

Open

Eject

Tilt +

Tilt –

Detach

• Shaded items cannot be used.

[Open] Opens the monitor panel. [Eject] Ejects the disc. [Close] Closes the monitor panel. [Tilt +/–] Tilts the monitor panel. [Detach] To detach the monitor panel. [Exit] Erases this screen.

Exit

Map screen

To turn off the AV function

• If the map is displayed, switch the screen to the AV screen by pressing DISP.

• To activate the AV function:

Bayern Radio

Pop Music

15:45

For the operations on the AV screen

☞ page 54

Source Off

Exit

Basic operations — Remote controller (RM-RK250)

Installing the battery

R03/LR03/AAA

Insert the batteries into the remote controller by matching the polarity (+ and –) correctly.

Before using the remote controller:

• Aim the remote controller directly at the remote sensor on the unit.

• DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).

The unit is equipped with the steering wheel remote control function.

• See the Installation/Connection Manual (separate volume) for connection.

ENGLISH

Caution:

Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

• If the range or effectiveness of the remote controller decreases, replace both batteries.

INTRODUCTION

Main elements and features

For navigation system operations and AV operations

On the map screen On the AV screens On menu screens

ENGLISH

AV/OFF

MAP/POS

TRAFFIC

ENT 6

5/∞

Switches to the AV screen. Selects the source.

Turns off the AV function if pressed and held, and turns on the AV function again if pressed briefly. Displays your current

position.

Switches <Destination

Menu>, <Function Menu>, and the map

screen. (☞ page 15)

Not used for this System.

(Not used)

Scrolls the map (in eight directions).

Switches to the map screen. Displays your current position.

Displays <AV Menu> screen. (☞ page 16)

• “DISC/SD/USB/USB iPod”: Plays/pauses.

• “Bluetooth PHONE”: Answers incoming

• “Bluetooth AUDIO”: Starts playback.

• Disc: Selects the title/group/program/

• File: Selects the folders.

• FM/AM: Selects preset stations.

• DAB tuner: Selects the services.

• “USB iPod”: Selects previous/next item.

• “iPod”: Enters the main menu (5), and

• FM/AM: Searches for stations.

• DAB tuner: Searches for ensembles.

• “DISC/SD/USB/USB iPod/iPod/

calls.

playlist.

pauses/resumes playback (∞).

Bluetooth AUDIO”: Selects tracks/ chapters/items.

• In navigation menus: Switches to the AV screen.

• In <AV Menu> screen: Selects the source.

• In <Destination Menu> screen: Displays the map.

• In <AV Menu>screen: Displays the top screen of <AV Menu> or switches to the AV screen.

Confirms the selection.

In navigation menus: Selects an item.

On the map screen On the AV screens On menu screens

PHONE

BACK/BAND

VOL +/–

p q

+/–

HOME

ATT

DISP

Number

keys

12 34

5 89

• Displays <Dial Menu> screen. (☞ page 85)

• Displays <Redial> list if pressed and held. (☞ page 85)

• Answers incoming calls.

“TUNER/DAB”: Selects the bands. Repeats the last voice guidance during guidance.

Adjust the volume.

Scales the map. (Not used)

Starts guidance to the home. (☞ page 24)

Attenuates/restores the sound.

• Changes the display information. (☞ page 10)

• Turns off the screen if pressed and held, and turns on the screen again if pressed briefly. (☞ page 5)

(Not used)

•

• “DISC/SD/USB“: Stops playback.

• “Bluetooth PHONE”: Ends the call.

• “Bluetooth AUDIO”: Pauses.

(Not used)

• Enters numbers.

• “TUNER/DAB”: Selects the preset station/service directly.

• In navigation menus: Displays the map screen or the top screen of current menu (<Destination Menu> or <Function Menu>).

• In <AV Menu> screen: Switches to the AV screen.

In navigation menus: Enters a phone number or house number.

ENGLISH

Slide to open

These buttons do not function at this position.

Continued on the next page

INTRODUCTION

For AV operations only

TOP M

ENGLISH

DVD MENU

ENT OSD

RETURN

;

DIRECT/

CLEAR ASPECT

1/¡

d f g

On the AV screens

• DVD/DivX 6: Shows the disc menu. (☞ pages 71 and 73)

• VCD: Resumes PBC playback. (☞ page 75)

• DVD-VR: Shows the Original Program screen. (☞ page 72)

• DVD/DivX 6: Shows the disc menu. (☞ pages 71 and 73)

• VCD: Resumes PBC playback. (☞ page 75)

• DVD-VR: Shows the Playlist screen. (☞ page 72)

• Makes selection/settings.

• @ / #: Skips back or forward by 5 minutes for DivX/MPEG1/MPEG2. (☞ page 73)

• DISC +/– buttons: Changes discs for “CD-CH.”

Shows the on-screen bar. (☞ page 76)

VCD: Returns to the PBC menu. (☞ page 75)

• “DISC/SD/USB“: Switches the number entry mode. (☞ pages 71 to 75)

• Erases the misentry after entering a wrong number.

Changes the aspect ratio of the playback picture.

“DISC/SD/USB/USB iPod”: Reverse search/forward search.

Disc: Selects the audio language/audio stream/audio channel.

Disc: Selects the subtitles.

Disc: Selects the view angle.

y i

;

Slide to open

d fgh

These buttons do not function at this position.

Menu operations

To display a menu

Navigation menus

Map screen

ENGLISH

• If the operating buttons are not displayed, touch the screen.

Destination Menu (☞ page 45)

To return to the map, press [Exit] on the touch panel or MAP/POS on the remote controller.

On the remote:

Function Menu (☞ page 46)

Map Settings (☞ page 47)

Returns to <Function Menu> screen

To return to the map, press [Exit] on the touch panel or MAP/POS on the remote controller.

Continued on the next page

INTRODUCTION

AV menu

AV screen

ENGLISH

On the remote:

Basic menu operations

Navigation menu

Ex.: <Sound> in <Map Settings> screen

Returns to the previous screen

AV Menu (☞ pages 103 to 110)

Exit

Setup (☞ page 103)

Setup

Demonstration Wall Paper Color Scroll Dimmer

Dimmer Time Set

Back Exit

Returns to <AV Menu> screen

To return to the AV screen, press [Exit] on the touch panel or DISP on the remote controller.

Metal

Blue

Once

Auto

618

Moves to the

preceding

menu page

Moves to the succeeding menu page

Current page/total menu pages

Exits from the

menu screen

AV menu

Ex.: <Setup> menu in <AV Menu> screen

Moves to the preceding menu page

Setup

Demonstration Wall Paper Color Scroll Dimmer

Dimmer Time Set

Back Exit

Indicates the remaining time before the current screen is erased automatically

Returns to the previous screen

Moves to the succeeding menu page

• Non-available items will be shaded on the menu screen.

Metal

Blue

Once

Auto

618

Exits from the

menu screen

The following steps are one of the fundamental procedures. Some of the settings do not open the sub-setting window, but just selecting an option will change the setting.

• The display indications may change according to change of the specifications.

Ex.: Changing the <AV Input> setting in <AV Menu> screen

Setup

Demonstration Wall Paper Color Scroll Dimmer

Dimmer Time Set

Back Exit

Setup

AV Input Camera Input External Input

Metal

Blue Once Auto

Audio&Video

Off

iPod External

Auto

618

ENGLISH

• You can also use MENU on the remote controller.

Back Exit

Setup

AV Input Camera Input External Input

Exit

Back Exit

Off

iPod (Off)

Audio&Video

Audio

• When operating on <AV Menu>, press [Back] to close the selection list or to change other settings.

⁄

Setup

AV Input Camera Input External Input

Back Exit

Audio

Off

iPod External

INTRODUCTION

NAVIGATION SYSTEM

Safety instructions for the Navigation System

SAFETY INSTRUCTIONS

ENGLISH

Use of the Navigation System is only permitted if the traffic conditions are suitable and you are absolutely sure that no risk, obstruction or inconvenience will be incurred to you, your passengers or other road users. The requirements of the Road Traffic Regulations must always be followed. The destination must not be

entered while driving the car.

The Navigation System serves solely as an aid to navigation. It never releases the drivers from their duties to drive carefully and to make own judgement in road traffic. Inaccurate or incorrect instructions may happen to be given due to changing traffic conditions. The actual road signs and traffic regulations must therefore always be observed. In particular, the Navigation System cannot be used as an aid to orientation when visibility is poor. This Navigation System must only be used for its intended purpose. The volume of the car radio/ Navigation System must be adjusted so that external noise is still audible.

Navigation guidance is performed, based on the database, therefore, it may not be applicable to the current situation because of changes in traffic conditions (e.g. changes in tollroads, principal roads, one-way traffic, or other traffic regulations). In this case, observe the current traffic signs or regulations.

• Traffic signs should be observed carefully while driving using the Navigation System. Navigation System is only an aid. Driver must always decide whether or not to heed the information provided.

JVC does not accept liability for erroneous data provided by the Navigation System.

• Traffic guidance is restricted to passenger vehicles only. Special driving recommendations and regulations for other vehicles (e.g. commercial vehicles) are not included.

• Do not operate the unit while driving.

Terms of license

You are granted a non-exclusive license to use the database for your personal purposes. The present license does not authorize the granting of sublicenses. Use of the data is only permitted in this specific JVC system. It is forbidden to extract or make further use of significant parts of the database content, or to duplicate, modify, adapt, translate, analyze, decompile or reverse-engineer any part thereof.

WARNING:

Road traffic regulations always take priority when a vehicle is being driven in traffic. Navigation System is only an aid. Errors may occur in individual data items/ entries. At all times, the driver must decide whether or not to heed the information provided. JVC does not accept liability for erroneous data provided by the Navigation System.

When replacing/rotating the tyres:

It is required to clear all the accumulated calibration data which is important for accurate navigation. To clear the data, perform <Reset Calibration Data>. (☞ page 49)

On map updating

If “Your map data is more than one year old, and the update may be available. For more information, please visit www.jvc-exad.com” appears on the monitor, visit <http://www.jvc-exad.com>. For details about updating your unit, visit <http:// www.jvc-exad.com> (English website only).

Basic operations

The map scrolls automatically so that your position is always at the centre of the map.

Your position

Current time

• The information on the map (such as street name, the POI information, and speed limit) may not be always displayed depending on the condition (for example, if the System does not have the information of the position).

Current street

Speed limit on the current street

Direction

Scale

Icons on the map

Home (☞ pages 22 to 24)

Favourite points (☞ pages 22 to 24, 36)

POI (Point Of Interest) (☞ pages 30, 32 and 53)

• Home and Favourite points icons are displayed when registering home/favourite points or searching for a destination.

• POI icons are displayed on the map when a group is selected in the <POI Icon> setting (☞ page 48) and the map scale is between 25 m and 400 m. (The travel icons and leisure icons are displayed when the map scale is between 25 m and 1 km.)

• The POI information of the selected travel or leisure icon may not be displayed correctly when the System displays the wide area of map. In this case, zoom in the map to display the detailed map.

ENGLISH

NAVIGATION SYSTEM

To change the map scale

1 Touch the screen to display the operating

buttons.

ENGLISH

• You can also display the buttons by moving your hand close to the screen.

• The buttons disappear if no operation is done for about 5 seconds.

Scale buttons

• You can also select a scale directly by pressing one of the scale buttons.

To scroll the map

The position you touched is centred on the map.

Zoom in

The map scrolls to the direction you are touching and holding.

• Touch and hold the map to keep scrolling the map.

• The scrolling speed varies depending on the position you are touching and holding:

– Inner area: slow – Outer area: fast

Zoom out

Direction and distance from your current position

To display your current position

Displays current position

To change the map view

The map view changes as follows: 2D Heading Up = 3D Map = 2D North Up

• You can also change the map view through

< (Function Menu)> - < (Map Settings)> - <Display> - <View Mode>. (☞ page 48)

2D Heading Up (2D H.Up)

The map rotates so that you are always displayed heading “upwards.”

Shows the direction of north

Direction of the car

3D Map (3D H.Up)

The three dimensional map is displayed in “heading up.”

Shows the direction of north

Direction of the car

ENGLISH

2D North Up (2D N.Up)

The map view is oriented with north “upwards,” as in usual paper maps.

Direction of the car

NAVIGATION SYSTEM

Registering your home/favourite points

You can register one point as your home and 100

ENGLISH

favourite points.

• For guidance to your home, ☞ page 24.

• For guidance to a favourite point, ☞ page 36.

1 Place the cursor on the position where you

want to register. (☞ page 20)

• If there are several POIs on the selected position, select one from the list. – The list appears only when <POI Icon> is set

to <On>. (☞ page 48)

The selected position is saved as a favourite point and the favourite point is marked with icon on the map. (You cannot save the selected position if 100 favourite points are already registered.)

• You can display the map of selected area on whole screen by touching the map part once. (If you press more than once, the map scrolls.) To display above screen again, press [Select].

To register the selected position as your home:

POIs

The home is marked with icon on the map.

• When the home is already registered, you are asked if you want to replace the old home. Press [Yes] to replace, or press [No] to cancel.

• To return to the map, press [Exit].

Editing information

1 Select a registered point you want to edit.

To select your home

To select a favourite point

Moves to the next/previous list

A To edit the name.

• You can use up to 31 characters.

Deletes the entry

• Press briefly: last character

• Press and hold: all characters

ENGLISH

Displays other keyboards*

* For available characters, ☞ page 52.

B To edit the phone number.

Deletes the entry

• Press briefly: last number

• Press and hold: all numbers

3 Edit the information.

A Displays the name editing screen

B Displays the phone number editing screen

Changes the registration of the favourite point to home

• To return to the map, press [Exit].

To delete the registration

Press [Delete] in step 3.

A confirmation message appears. Press [Yes] to confirm the operation. Press [No] to cancel.

• To return to the map, press [Exit].

Continued on the next page

NAVIGATION SYSTEM

To delete all registered items

To go home

When you have registered your home, you can easily get guided to home.

ENGLISH

[Home]: Deletes your home [Favourite]: Deletes all favourite points

A confirmation message appears. Press [Yes] to confirm the operation. Press [No] to cancel.

While not guided...

On the unit:

Your home

On the remote:

On the map screen only

• To return to the map, press [Exit].

• To cancel guidance, ☞ page 26.

Starting guidance

Setting a destination on the map

1 Touch the position where you want to select

as a destination. (☞ page 20)

• If there are several POIs on the selected position, select one from the list. – The list appears only when <POI Icon> is set

to <On>. (☞ page 48)

Distance and direction from your position

Information on the cursor-pointed position

• You can display the map of selected area on whole screen by touching the map part once. (If you press more than once, the map scrolls.) To display above screen again, press [Select].

The System starts calculating the route to the selected destination, and guidance starts.

Cancels the calculation

ENGLISH

After pressing [Select] on the map screen, you can do various operations by pressing one of the buttons on the next screen. Available buttons vary according to the type of the selected position and the navigation status.

[Go]: [Replace]: Changes the destination to the selected position. [Save]: [Edit]: [Add]: [Options]:

Starts guidance to a position. (☞ above)

Saves a position as a favourite point. (☞ page 22) Edits the information of a position. (☞ page 23) Adds a position to via points. (☞ page 43) Modifies the route options. (☞ page 27)

NAVIGATION SYSTEM

To cancel guidance

1 2

ENGLISH

A confirmation message appears. Press [Yes] to confirm the operation. Press [No] to cancel.

Setting a destination using the Destination Menu

Home (☞ page 24)

(☞ page 35)

Favourites

(☞ page 36)

Address

(☞ page 28)

Vicinity

(☞ page 30)

POI Name

(☞ page 32)

Phone (☞ page 31)

Postcode

(☞ page 34)

Quick Search 1 – 3 (☞ page 37)

Goes to your home.

• Not selectable if no home is registered.

Searches from the history of previous destinations and via points (latest 50 points).

• Not selectable if there is no history.

Searches from your favourite points (maximum 100 points).

• Not selectable if no favourite point is registered.

Searches by an address.

Searches for POIs (Point Of Interest) around the following places: your current position, the position selected on the map, the destination, or the route you are taking.

Searches from the database of POI.

Searches by a telephone number.

Searches by a postcode.

Searches for POIs of a registered category.

Changing route options

You can modify your route options each time before you start guidance.

1 Place the cursor on your destination. 2

4 Set options.

Priority Select the priority for route

calculation (fastest route or shortest route). (☞ page 47)

Motorway Toll Road Ferry

Select whether to use or avoid these types of roads to go to the destination. (☞ page 47)

5 Finish the settings.

ENGLISH

• You can also change these settings through < (Function Menu)> - < (Map Settings)> - <Route> (☞ page 47).

NAVIGATION SYSTEM

Searching for a place

To enter names, addresses, or numbers

ENGLISH

Ex. Input screen for a city name

Displays other keyboards*

Deletes the entry

• Press briefly: last character

• Press and hold: all characters

Enters a space

Returns to the previous input screen

• Buttons vary depending on the input item.

• Non-available items will be shaded on the menu screen.

• For some input screens, available characters are automatically narrowed down as the System searches its database for matches.

• Lower cases are not available.

*1 For available characters, ☞ page 52. *2 When there are more than 100 matches, “100+”

is displayed and only first 100 matches are displayed.

Exits the input screen and

returns to the map

List of matches

Number of matches*

Displays the number and symbol keys*

Moves to the next/

previous list

By address <Address>

2 Enter the city name, then select from the list.

A Changes country

Moves to the next/previous list

A To change country

A search result is always displayed with the 2D North Up (2D N.Up) map view, regardless the <View Mode> setting. (☞ page 48)

3 Enter the street name, then select from the

list.

• You can also select the centre of the city by

pressing [Centre]. When selecting centre of the city, go to step 5.

4 Enter the house number, then select from

the list.

• You can also select the centre of the street or an

intersection on the street by pressing [Middle of the Road] or [Intersection]. – When selecting intersection on the street,

specify the crossing street after pressing [Intersection].

• If no data of house number for the selected street is available in the database, this step is skipped.

ENGLISH

• You can display the map of selected area on whole screen by touching the map part once. (If you press more than once, the map scrolls.) To display above screen again, press [Select].

Moves to the next/previous list

NAVIGATION SYSTEM

POI near a place/route <Vicinity>

The System has a huge database of POIs (Point Of Interest), such as restaurants, petrol stations, hospitals, etc. You can search for a POI around the place where you are

ENGLISH

now. While guided, you can also search for a POI near the destination or along the route.

3 Select a category, then a sub-category for the

POI.

Searches from all sub-categories

2 Select the area to search.

Local Within 20 km of your current

position or the position selected on the map. If no POI is found in this area, the System expands the area to search.

Destination Within 20 km of the destination.

If no POI is found in this area, the System expands the area to search.

On Route 20 km along the route you are

taking.

Moves to the next/previous list of categories

Moves to the next/previous list of sub-categories

4 Select a POI from the list.

• You can display the map of selected area on whole screen by touching the map part once. (If you press more than once, the map scrolls.) To display above screen again, press [Select].

Sub-categories

Cancels

+ 225 hidden pages