For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
Model No.
Serial No.
FSUN3029-631D
[J]
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to
ensure your complete understanding and to obtain the best possible performance from the unit.
• Do not raise the volume level too much, as this
will block outside sounds, making driving
dangerous.
• Stop the car before performing any complicated
operations.
2
* Temperature inside the car....
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.
1
BASIC OPERATIONS
1
2
/I
ATT
KS-FX230
CH
KS-F130
Note:
When you use this unit for the
first time, set the built-in
clock correctly, see page 14.
23
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the power automatically comes on.
You do not have to press this button to turn on the power.
BAND
TUNER
F MA M
PROG
TAPECD-
PROG
TAPE
Select the source.
To operate the tuner, see pages 4 – 8.
To operate the tape deck, see pages 9 – 10.
ONLY FOR KS-FX230:
To operate the CD changer, see pages 16 – 18.
ENGLISH
3
4
Adjust the sound as you want (see pages 11 – 13).
To drop the volume in a moment
Press ATT briefly while listening to any source. “ATT” star ts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press ATT for more than 1 second.
Adjust the volume.
LOUD
Volume level appears.
3
RADIO OPERATIONS
1
Listening to the radio
1
KS-FX230
KS-FX230
BAND
TUNER
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
FM1FM2FM3AM
KS-F130
F MA M
KS-F130
12
Audio level indicator
LOUD
AM
FM1
FM2
FM3
2
To search stations of
higher frequencies.
SSM
To search stations of
lower frequencies.
To stop searching before a station is received, press the same button you have pressed
for searching.
When a station is received, searching stops.
To tune in a particular frequency manually:
1 Select the band (FM or AM)
For KS-FX230: Press TUNER/BAND repeatedly.
For KS-F130:Press FM or AM.
2 Press and hold SSM ¢
Now you can manually change the frequency while “M” is flashing.
3 Press SSM ¢
• If you hold down the button, the frequency keeps changing until you release the button.
4
or SSM 4 repeatedly until the frequency you want is reached.
or SSM 4 until “M” starts flashing on the display.
Start searching a station.
LOUD
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-station Sequential Memory)
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).
12
ENGLISH
1
2
KS-FX230
KS-F130
BAND
TUNER
F M
SSM
FM1FM2FM3AM
Select the FM band number (FM1, FM2 or
FM3) you want to store FM stations into.
FM1FM2FM3
Press and hold the both buttons for more than
3 seconds.
LOUD
“SSM” appears, then disappears when automatic
preset is over.
Local FM stations with the strongest signals are searched and stored automatically in the
band number you have selected (FM1, FM2 or FM3). These stations are preset in the n umber
buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored in number button 1 will be automatically
tuned in.
5
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band
123
KS-FX230
1
BAND
TUNER
KS-F130
F M
Select the FM1 band.
LOUD
2
3
4
Tune into a station of 88.3 MHz.
SSM
12
See page 4 to tune into a station.
LOUD
Press and hold the button for more than 1
second.
LOUD
Preset number “1” starts flashing for a while.
Repeat the above procedure to store other station into other
preset numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
6
Tuning into a preset station
1
You can easily tune into a preset station.
Remember that you must store stations first. If you have not stored them yet, see pages 5
and 6.
ENGLISH
1
KS-FX230
KS-F130
KS-FX230
789101112
BAND
Select the band (FM1, FM2, FM3 or AM) y ou
TUNER
want.
FM1FM2FM3AM
F MA M
KS-F130
12
AM
FM1
FM2
FM3
2
123456
Select the number (1 – 6) for the preset station
you want.
7
Loading...
+ 15 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.