JVC KD-SR60, KD-SR40 Instruction Manual

KD-SR60 / KD-SR40

CD RECEIVER

INSTRUCTION MANUAL

RECEPTOR CON CD

MANUAL DE INSTRUCCIONES

RÉCEPTEUR CD

MANUEL D’INSTRUCTIONS

ENGLISH

ESPAÑOL

FRANÇAIS

Please read all instructions carefully before operation to obtain the best possible performance from the unit.

Por favor lea detenidamente este manual para comprender a fondo todas las instrucciones y obtener un máximo disfrute de esta unidad.

Veuillez lires les instructions attentivement avant d’utiliser l’appareil afin d’obtenir les meilleures performances possibles de l’appareil.

For customer Use:

Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No.

GET1002-001A [J]

CONTENTS BEFORE USE

BEFORE USE 2

BASICS 3

GETTING STARTED 4

CD / USB / iPod 5

RADIO 7

AUX 8

(for

KD-SR60

Pandora®

iHeartRadio®

) 9

(for

KD-SR60

) 10

AUDIO SETTINGS 11

DISPLAY SETTINGS 12

MORE INFORMATION 13

TROUBLESHOOTING 14

INSTALLATION / CONNECTION 16

SPECIFICATIONS i and ii

(at the end of the book)

How to read this manual

• Operations are explained mainly using buttons on the faceplate of

KD-SR40

•

[XX]

indicates the selected items.

•

( XX)

indicates references are

available on the stated page.

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the USB device or iPod/iPhone if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

Remote control (RM-RK52):

• Do not leave the remote control in hot places such as on the dashboard.

• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used batteries promptly. If swallowed, contact a physician immediately.

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth. Cleaning the connector: Detach the faceplate and clean the connector

gently with a cotton swab, being careful not to damage the connector.

Handling discs:

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

• Do not use any accessories for the disc.

• Clean from the center of the disc and move outward.

• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

• When removing discs from this unit, pull them out horizontally.

• Remove burrs from the center hole and disc edge before inserting a disc.

Connector (on the reverse side of the faceplate)

BASICS

Faceplate

KD-SR60

Volume knob

(turn/press) Loading slot

Display window

Attach

Detach

How to reset

Detach button

KD-SR60

Your preset adjustments will also be erased.

To Do this (on the faceplate) Do this (on the remote control)

Turn on the power Press L /SOURCE.

Adjust the volume Turn the volume knob. Press VOL + or VOL –.

Select a source • Press L /SOURCE repeatedly.

Change the display information

• Press and hold to turn off the power.

Press the volume knob to mute the sound or pause playback.

• Press again to cancel.

• Press L /SOURCE, then turn the volume knob within 2 seconds.

Press DISP repeatedly.

• Press and hold to scroll the current display information.

( 14)

( not available )

Press

• Press again to cancel.

Press SOURCE repeatedly.

( not available )

Remote control (RM-RK52)

Remote sensor (Do not expose to bright sunlight.)

Pull out the insulation sheet when using for the first time.

How to replace the battery

to mute the sound or pause playback.

ENGLISH |

GETTING STARTED

Cancel the demonstration

Press and hold MENU.

1 2 Turn the volume knob to select 3 Turn the volume knob to select 4 Press MENU to exit.

Set the clock

Press and hold MENU.

1 2 Turn the volume knob to select 3 Turn the volume knob to select 4 Turn the volume knob to make the settings, then press the knob.

Day

Hour Minute

5 Turn the volume knob to select 6 Turn the volume knob to select

knob.

7 Press MENU to exit.

Set the basic settings

Press and hold MENU.

1 2 Turn the volume knob to make a selection (see the following table),

then press the knob.

3 Press MENU to exit.

To return to the previous setting item or hierarchy, press G PTY.

[DEMO]

, then press the knob.

[DEMO OFF]

[CLOCK] [CLOCK SET]

[24H/ 12H] [12 HOUR]

, then press the knob.

[24 HOUR]

, then press the

CLOCK

CLOCK ADJ

CLOCK DISP ON

SETTINGS

BEEP

SRC SELECT

PANDORA *(For

IHEART

AUX

AUTO

:The clock time is automatically set using the Clock Time (CT) data in

FM Radio Broadcast Data System signal.;

:The clock time is shown on the display even when the unit is turned

off.;

OFF

:Cancels.

:Activates the keypress tone.;

:Enables AM in source selection.;

KD-SR60

(For

when the KS-BTA100 Bluetooth adapter is connected to the auxiliary input jack

)

:Enables PANDORA in source selection.;

KD-SR60

)

:Enables IHEARTRADIO in source selection.;

:Enables AUX in source selection.;

( 8)

. The source name will change to BTAUDIO.

OFF

:Deactivates.

OFF

:Cancels.

:Disables.

OFF

:Disables.

OFF

:Disables.;

:Disables.

BT ADAPTER

F/W UPDATE

SYSTEM

F/W xxxx

* Not displayed when the corresponding source is selected.

YES

:Starts upgrading the firmware.; NO:Cancels (upgrading is not activated). For details on how to update the firmware, see: <http://www.jvc.net/cs/car/>.

Default:

:Select

CD / USB / iPod

Start playback

The source changes automatically and playback starts.

Eject disc Label side

USB

USB input terminal

USB 2.0 cable (commercially available)

iPod/iPhone (for

KD-SR60

USB input terminal

(Accessory of the iPod/iPhone)

• You can also change the source from the other source to iPod by pressing iPod.

Press 5 iPod MODE repeatedly to select the control mode (

HEAD MODE IPHONE MODE

[HEAD MODE]

: From the unit.

: From the iPod/iPhone.

)

[IPHONE MODE]

KD-SR60

To Do this

Select a track/

Press / (or press / on RM-RK52).

file

Select a folder Reverse/

Press 1 / 2 (or press / on RM-RK52).

Press and hold

/ (or press and hold / on RM-RK52).

Fast-forward

Repeat play

Press 4 B repeatedly to make a selection.

• Audio CD or JVC Playlist Creator (JPC) / JVC Music Control (JMC) file TRACKRPT, RPT OFF

• MP3/WMA/WAV file: TRACKRPT, FOLDER RPT, RPT OFF

• iPod: ONE RPT, ALL RPT, RPT OFF

Random play

Press 3 A repeatedly to make a selection.

• Audio CD: ALL RND, RND OFF

• MP3/WMA/WAV file or JPC / JMC file: FOLDERRND, ALL RND, RND OFF

• iPod: SONG RND, ALL RND, RND OFF

Do not leave the cable inside the car when not using.

You can still play/pause, file skip, fast-forward or reverse files from the unit.

Only for MP3/WMA/WAV files. This does not work for iPod.

For iPod: Applicable under

[HEAD MODE]

only.

( 13)

ENGLISH |

CD / USB / iPod

Select a track/file from a list

For iPod: Applicable only when

[HEAD MODE]

is selected.

( 5)

1 Press MENU 2 Turn the volume knob to make a selection, then press the knob.

• MP3/WMA/WAV file: Select the desired folder, then a file.

• iPod or JPC / JMC file: Select the desired file from the list (PLAYLISTS,

ARTISTS, ALBUMS, SONGS, PODCASTS*, GENRES, COMPOSERS*, AUDIOBOOKS*).

Only for iPod.

If you have many files....

You can search through them quickly (on step volume knob quickly.

• Not applicable for iPod.

2 above) by turning the

Select a song by name

(For

KD-SR60

)

While listening to the iPod and If you have many folders or tracks/files, you can search through them quickly according to the first character (A to Z, 0 to 9 and OTHERS).

• “OTHERS” appear if the first character is other than Ato Z, 0 to 9.

[HEAD MODE]

is selected

( 5)

....

1 Press MENU . 2 Turn the volume knob to select the desired list, then press the

knob.

3 Press 1 / 2 or turn the volume knob quickly to select the desired

character.

4 Turn the volume knob to select the desired folder or track/file, then

press the knob.

Change the USB drive

When a smartphone (Mass Storage Class) is connected to the USB input terminal, you can select its internal memory or external memory (such as an SD card) to playback the stored songs. You can also select the desired drive to playback when a multiple drives device is connected.

Press number button 5 repeatedly to select the desired drive.

(or)

1 Press and hold MENU . 2 Turn the volume knob to select 3 Turn the volume knob to select 4 Press the volume knob to select

The next drive is selected automatically. Repeat steps 1 to 4 to select the following drives. Selectable items:

[DRIVE1]

[DRIVE5]

[USB/IPOD] [USB]

, then press the knob.

[DRIVECHANGE]

Change the playback speed of the Audiobook

(For

KD-SR60

)

While listening to the iPod and

[HEAD MODE]

is selected

( 5)

....

1 Press and hold MENU . 2 Turn the volume knob to select 3 Turn the volume knob to select

[USB/IPOD] [IPOD]

, then press the knob.

4 Turn the volume knob to make a selection, then press the knob.

BOOK NORMAL

speed of the Audiobooks sound file in your iPod/iPhone.

(Default: Depends on your iPod/iPhone setting.)

• To return to the previous setting item or hierarchy, press G PTY.

• To cancel, press MENU.

BOOK FASTER

BOOK SLOWER

: Select the desired playback

RADIO

“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.

Search for a station

Press L /SOURCE to select FM or AM.

1 2 Press / (or press / on RM-RK52) to search for a station

automatically.

(or) Press and hold / (or press and hold / on RM-RK52) until

“M” flashes, then press repeatedly to search for a station manually.

Store a station

You can store up to 18 stations for FM and 6 stations for AM.

While listening to a station....

Press and hold one of the number buttons (1 to 6) to store.

(or) 1 Press and hold the volume knob until “PRESETMODE” flashes. 2 Turn the volume knob to select a preset number, then press the

knob.

The preset number flashes and “MEMORY” appears.

• To select a stored station: Press one of the number buttons (1to6).

(or)

Press MENU, then turn the volume knob to select a preset number and

press the knob to confirm.

Search for your favorite program (PTY Search)

Available only for FM source.

1 Press and hold G PTY. 2 Turn the volume knob to select a PTY code, then press the knob to

start searching.

If there is a station broadcasting a program of the same PTY code as

you have selected, that station is tuned in.

PTY code:

NEWS, INFORM

ADLT HIT

(adult hits),

(nostalgia),

JAZZ, CLASSICL

and blues),

LANGUAGE, REL MUSC

(personality),

HIP HOP, WEATHER

PUBLIC, COLLEGE, HABL ESP

(information),

SOFT RCK

(classical),

SPORTS, TALK, ROCK, CLS ROCK

(softrock),

TOP 40, COUNTRY, OLDIES, SOFT, NOSTALGA

R & B

(rhythm and blues),

(religious music),

REL TALK

(Spanish talk),

(religious talk),

MUSC ESP

(classic rock),

SOFT R&B

(Spanish music),

(soft rhythm

PERSNLTY

Other settings

Press and hold MENU.

1 2 Turn the volume knob to select 3 Turn the volume knob to make a selection

knob.

[TUNER]

, then press the knob.

( 8)

, then press the

4 Press MENU to exit.

To return to the previous setting item or hierarchy, press G PTY.

ENGLISH |

RADIO

RADIO TIMER

SSM

IF BAND AUTO

MONO

AREA AREA US

Turns on the radio at a specific time regardless of the current source.

1 ONCE/ DAILY/ WEEKLY/ OFF 2 FM/ AM 3 01 4

Set the activation day* and time.

• “

* Selectable only when Radio Timer will not activate for the following cases.

• The unit is turned off.

•

[OFF]

selected.

SSM 01 – 06

stations for FM. “SSM” stops flashing when the first 6 stations are stored. Select

SSM 07 – 12

adjacent FM stations. (Stereo effect may be lost.); interference noises from adjacent FM stations, but sound quality will not be degraded and the stereo effect will remain.

Displayed only when the source is FM.

:Improves the FM reception, but the stereo effect will be lost.;

AREA EU

some South American countries, AM/FM intervals: 10kHz/50kHz.

Default:

:Select the FM or AM band.

to 18 (for FM)/ 01 to 06 (for AM):Select the preset station.

” lights up when complete.

is selected for

( 4)

SSM 07 – 12

SSM 13 – 18

:Increases the tuner selectivity to reduce interference noises from

: For North/Central/South America, AM/FM intervals: 10kHz/200kHz.; :For any other areas, AM/FM intervals: 9kHz/50kHz.;

:Select how often the timer will be turned on.

[ONCE]

[WEEKLY]

is selected in step 1.

[AM]

[SRC SELECT]

SSM 13 – 18

to store the following 12 stations.

after Radio Timer for AM is

:Automatically presets up to 18

WIDE

:Subjects to

OFF

AREA SA

:Cancels.

:For

AUX

Use a portable audio player

Connect a portable audio player (commercially available).

2 Select 3 Press L /SOURCE to select AUX. 4 Turn on the portable audio player and start playback.

Use a Bluetooth® device

Connect the Bluetooth adapter, KS-BTA100 (separately purchased).

2 Register (pair) the Bluetooth device with KS-BTA100. 3 Select 4 Press L /SOURCE to select BT AUDIO. 5 Start using the Bluetooth device.

For details, refer to the instruction manual of KS-BTA100.

3.5mm (1/8") stereo mini plug with “L” shaped connector (commercially available)

Auxiliary input jack

[ON]

for

[AUX]

[SRC SELECT]. ( 4)

Use a 3-core plug head stereo mini plug for optimum audio output.

Auxiliary input jack

[BT ADAPTER]

for

[AUX]

Portable audio player

Blue/white

Black

Brown

[SRC SELECT]. ( 4)

Wiring harness of the unit

( 17)

Blue/white: Remote

Black: Ground

Brown: Tel muting

Pandora®

Preparation:

Install the latest version of the Pandora application onto your device (iPhone/ iPod touch), then create an account and log in to Pandora.

• Select

[ON]

for

(for

[PANDORA]

KD-SR60

)

[SRC SELECT]. ( 4)

Start listening

Open the Pandora application on your device.

1 2 Connect your device to the USB input terminal.

USB input terminal

(Accessory of the iPod/iPhone)

The source changes to PANDORA and broadcast starts.

* Do not leave the cable inside the car when not using.

To Do this

Pause or resume playback

Thumbs up or thumbs down

Skip a track

Press the volume knob (or press on RM-RK52).

Press 2 /1 (or press / on RM-RK52).

• If thumbs down is selected, the current track is skipped.

Press (or press on RM-RK52).

Create a new station

Press MENU.

1 2 Turn the volume knob to select 3 Turn the volume knob to select

press the knob.

A new station is created based on the current song or artist.

[NEW STATION] [FROM TRACK]

, then press the knob.

[FROM ARTIST]

, then

Search for a registered station

Press MENU.

1 2 Turn the volume knob to make a selection, then press the knob.

[BY DATE]:

According to the registered date.

[A-Z]:

Alphabetical order.

3 Turn the volume knob to the desired station, then press the knob.

Bookmark a song or artist information

Press and hold the volume knob.

1 2 Turn the volume knob to select

press the knob.

“BOOKMARKED” appears and the information is stored to your device. The bookmark is available on your Pandora account but not on this

unit.

[THIS TRACK] or [THIS ARTIST]

, then

ENGLISH |

iHeartRadio®

Preparation:

Install the latest version of iHeart Link for JVC application onto your device (iPhone/ iPod touch), then create an account and log in to iHeartRadio.

• Select

[ON]

for

[IHEARTRADIO]

(for

KD-SR60

[SRC SELECT]. ( 4)

)

Start listening

Open the iHeart Link application on your device.

1 2 Connect your device to the USB input terminal.

USB input terminal

To Do this

Pause or resume playback

Thumbs up or thumbs down for custom station

Skip a track for custom station Create a new/custom station Add to favorite stations for

live station Scan for live station

Press the volume knob (or press

on RM-RK52).

Press 2 /1 (or press / on

RM-RK52).

• If thumbs down is selected, the current track is skipped.

Press (or press on RM-RK52). Press and hold the volume knob. Press and hold 3.

Press 3.

(Accessory of the iPod/iPhone)

* Do not leave the cable inside the car when not using.

3 Press L /SOURCE to select IHEARTRADIO.

Broadcast starts automatically

Search for a station

Press MENU.

1 2 Turn the volume knob to select a category, then press the knob. 3 Turn the volume knob to the desired station, then press the knob.

When a city list appears, you can skip cities in alphabetical order.

4 Press MENU to exit.

Skip cities by alphabetical order

While a city list appears during search...

1 Turn the volume knob quickly to enter character search.

You can search through the list quickly according to the first character

(A to Z).

2 Turn the volume knob or press 2 /1 to select the character to

be search for.

3 Press the volume knob to start searching.

AUDIO SETTINGS

(For

KD-SR40

)

To Do this

Select a preset equalizer

Store your own sound settings

Default:

* Displayed only when

[ON]. ( 12)

Other settings

Press and hold MENU.

1 2 Turn the volume knob to make a selection (see the following table),

then press the knob.

Repeat step 2 until the desired item is selected.

3 Press MENU to exit.

To return to the previous setting item or hierarchy, press G PTY.

Press EQ repeatedly. (or) Press EQ, then turn the volume knob within

2seconds.

FLAT (default), HARD ROCK, JAZZ, POP, R&B,

TALK, USER1, USER2, VOCAL BOOST, BASS BOOST, CLASSICAL, DANCE

1 Press and hold EQ. 2 Turn the volume knob to select

the knob.

3 Turn the volume knob to select

then press the knob.

4 Turn the volume knob to make a selection, then

press the knob.

SUB.W *: –08 to +08 BASSLVL: –06 to +06 MIDLVL:–06to+06 TRELVL: –06 to +06

• To return to the previous setting item, press G PTY.

• To exit, press EQ.

[L/OMODE]

is set to

[SUB.W]

and

[EASY EQ]

[USER1]

[SUB.W]

, then press

[USER2]

is set to

EQ SETTING

EQ PRESET

EASY EQ

Default:

PRO EQ

AUDIO

BASS BOOST

LOUD 01

Default:

FLAT/

HARD ROCK/

VOCAL BOOST/

equalizer.

1 USER1/ USER2 2

Adjust your own sound settings.

SUB.W

MIDLVL: –06

1 USER1/ USER2 2 BASS

Adjust the sound elements of the selected sound tone.

BASS

Frequency: 60/ 80/ Level: Q:

MIDDLE

Level: Q:

TREBLE

Level: Q:

+01

/

+02

/02:Boosts low or high frequencies to produce a well-balanced sound

at low volume.;

JAZZ/

POP/

R&B/

BASS BOOST/

:Select a preset name.

–08

to

+08/ BASSLVL: –06

to

+06/ TRELVL: –06

:Select a preset name.

MIDDLE

TREBLE

:Select a sound tone.

–06

Frequency:

: Selects your preferred bass boost level.;

Q1.0/ Q1.25/ Q1.5/ Q2.0 (

0.5/ 1.0/ 1.5/ 2.5 kHz –06

Q0.75/ Q1.0/ Q1.25

10.0/ 12.5/ 15.0/ 17.5 kHz –06

Q FIX

OFF

:Cancels.

TALK/

CLASSICAL/

100/ 200 Hz

+06

DANCE

to

+06

(

USER1/

:Selects a preset

+06

Default: (

(00) (

Default: (

(00) (

OFF

:Cancels.

USER2/

80 Hz 00

)

Q1.0

)

1.0 kHz

Q1.25

10.0 kHz

Q FIX

)

ENGLISH |

AUDIO SETTINGS

SUB.WLEVEL

SUB.W

SUB.WLPF

–08

—

+08(00

):Adjusts the subwoofer output level.

/

OFF

: Turns on or off the subwoofer output.

THROUGH

:All signals are sent to the subwoofer. ;

MID85Hz

/

HIGH 120Hz

:Audio signals with frequencies lower than

LOW55Hz

55Hz/ 85Hz/ 120Hz are sent to the subwoofer.

FADER

R06

—

F06(00

):Adjusts the front and rear speaker output balance.

BALANCE

L06

—

R06(00

):Adjusts the left and right speaker output balance.

VOLADJUST –05

—

+05(00

):Presets the volume adjustment level of each source (compared to the FM volume level). Before adjustment, select the source you want to adjust. (“VOLADJFIX” appears if FM is selected.)

AMPGAIN LOWPOWER

:Limits the maximum volume level to 30. (Select if the maximum power of each speaker is less than 50W to prevent damaging the speakers.);

HIGH POWER

:The maximum volume

level is 50.

D.T.EXP

(Digital Track Expander)

TELMUTING

L/OMODE SUB.W

:Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression.;

:Mutes the sounds while using the cellular phone (not connected through KS-BTA100).;

/

REAR

:Selects whether rear speakers or a subwoofer are

OFF

:Cancels.

connected to the REAR/SW line out terminals on the rear panel (through an external amplifier).

Displayed only when

[ON]

Displayed only when

This adjustment will not affect the subwoofer output.

If you are using a two-speaker system, set the fader level to

Does not work if

[L/OMODE]

[BTADAPTER]

is set to

[SUB.W]

is set to

[SUB.W]

is selected for

[AUX]

and

[SUB.W]

[SRCSELECT]

/

is set

[00]

DISPLAY SETTINGS

1 Press and hold MENU. 2 Turn the volume knob to make a selection (see the following table),

then press the knob.

Repeat step

3 Press MENU to exit.

To return to the previous setting item or hierarchy, press G PTY.

DISPLAY

DIMMER

BRIGHTNESS

SCROLL

The illumination control wire connection is required.

Some characters or symbols will not be shown correctly (or will be blanked).

2 until the desired item is selected.

Selects the display and button illumination adjusted in the

AUTO

:Changes between the day and night adjustments when you turn off or on

the car headlights. *

; ON:Selects the night adjustments.;

adjustments. Sets the button, display and USB input terminal brightness for day and night

separately.

1 DAY / NIGHT 2

Select a zone for setting.

Set the brightness level (00 to 31). (Default:

*2ONCE

intervals.;

:Select day or night.

( Illustration above)

:Scrolls the display information once.;

OFF

:Cancels.

DAY:31

AUTO

:Repeats scrolling at 5-second

( 17)

[BRIGHTNESS]

OFF

:Selects the day

;

NIGHT:15

Default:

setting.

)

MORE INFORMATION

About discs and audio files

• This unit can only play the following CDs:

• This unit can play back multi-session discs; however, unclosed sessions will be skipped during playback.

•

Unplayable discs:

- Discs that are not round.

- Discs with coloring on the recording surface or discs that

are dirty.

- Recordable/ReWritable discs that have not been

finalized.

- 8 cm CD. Attempting to insert using an adapter may

cause malfunction.

•

DualDisc playback:

does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product cannot be recommended.

•

Playable files:

- File extensions: MP3(.mp3), WMA(.wma)

- Bit rate: MP3: 8kbps — 320kbps

WMA: 32kbps — 192kbps

- Sampling frequency:

MP3: 48kHz, 44.1kHz, 32kHz, 24kHz, 22.05kHz, 16kHz, 12kHz, 11.025kHz, 8kHz

WMA: 8kHz — 48kHz

- Variable bit rate (VBR) files.

•

Maximum number of characters for file/folder name:

It depends on the disc format used (includes 4 extension

characters—<.mp3> or <.wma>.

- ISO 9660 Level 1 and 2: 32 characters

- Romeo: 32 characters

- Joliet: 32 characters

- Windows long file name: 32 characters

The Non-DVD side of a “DualDisc”

About USB devices

• This unit can play MP3/WMA/WAV files stored on a USB mass storage class device.

• You cannot connect a USB device via a USB hub.

• Connecting a cable whose total length is longer than 5m may result in abnormal playback.

• The maximum number of characters for:

- Folder names: 64 characters

- File names: 64 characters

- MP3 Tag: 64 characters

- WMA Tag: 64 characters

- WAV Tag: 64 characters

• This unit can recognize a total of 20 480 files, 999 folders (999 files per folder including folder without unsupported files), and of 8 hierarchies.

• This unit cannot recognize a USB device whose rating is other than 5V and exceeds 1A.

About iPod/iPhone

• Made for

- iPod touch (1st, 2nd, 3rd, 4th, and 5th generation)

- iPod classic

- iPod nano (3rd, 4th, 5th, 6th and 7th generation)

- iPhone, iPhone 3G, 3GS, 4, 4S, 5

• It is not possible to browse video files on the “Videos” menu in

[HEAD MODE]

• The song order displayed on the selection menu of this unit may differ from that of the iPod/iPhone.

• If some operations are not performed correctly or as intended, visit: <http://www.jvc.net/cs/car/>.

About JVC Playlist Creator and JVC Music Control

• This unit supports the PC application JVC Playlist Creator

• When you play audio file with song data added using the

• JVC Playlist Creator and JVC Music Control are available

About Pandora

• Pandora is available only in the U.S., Australia and New

• Because Pandora is a third-party service, the specifications

• Some functions of Pandora cannot be operated from this

• For issues using the application, please contact Pandora at

About iHeartRadio

• iHeartRadio® is a third-party service, therefore the

• Some iHeartRadio® functionality cannot be operated from

and Android

JVC Playlist Creator or JVC Music Control, you can search for audio file by Genres, Artists, Albums, Playlists, and Songs.

from the following web site: <http://www.jvc.net/cs/car/>.

Zealand.

are subject to change without prior notice. Accordingly, compatibility may be impaired, or some or all of the services may become unavailable.

unit.

pandora-support@pandora.com.

specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable.

this unit.

application JVC Music Control.

ENGLISH |

MORE INFORMATION

Change the display information

Press DISP repeatedly.

or AMStation name (PS)*1 Frequency Program type (PTY)*1*2 Title*1*2

USB

USB-IPOD

PANDORA

IHEART

AUX

BT AUDIO

Day/Clock

* *

Playing time Day/Clock Disc name*3 Album title/Artist*4 Track title*

* * * *

Playing time Day/Clock Album title/Artist the beginning)

Station name Album title/Artist Track title Playing time Day/Clock (back to the beginning)

Station name Track title*8 Track Artist*8 Day/Clock (back to the beginning)

AUX Day/Clock

BT AUDIO Day/Clock

(back to the beginning)

For FM Radio Broadcast Data System stations only.

If unavailable, “NO PTY” / “NO TEXT” appears.

Folder/file name*6 (back to the beginning)

Only for CD-DA: If not recorded, “NO NAME” appears.

Only for MP3/WMA files: If not recorded, “NO NAME” appears.

If not recorded, “NO NAME” appears.

Only for MP3/WMA files.

Track title

If not recorded, “NO NAME” appears.

If unavailable, station name appears.

(back to

TROUBLESHOOTING

Symptom Remedy

Sound cannot be heard. • Adjust the volume to the optimum level.

“MISWIRING CHK WIRING THEN RESET UNIT” / “WARNING CHK WIRING THEN RESET UNIT” appears and no operations can be done.

Source cannot be selected. Check the

Radio reception is poor. / Static noise while listening to the radio.

Correct characters are not displayed.

“PLEASE” and “EJECT” appear alternately.

“IN DISC” appears. Make sure nothing is blocking the loading slot when you

Disc cannot be ejected.

Playback order is not as intended.

Elapsed playing time is not correct.

“NOT SUPPORT” appears and track skips.

• Check the cords and connections.

Check to be sure the terminals of the speaker wires are

insulated properly, then reset the unit. If this does not solve the problem, consult your nearest service center.

[SRC SELECT]

setting.

( 4)

• Connect the antenna firmly.

• Pull the antenna out all the way.

This unit can only display uppercase letters, numbers, and

a limited number of symbols.

Press

, then insert the disc correctly.

eject the disc.

Press and hold

to forcibly eject the disc. Be careful not

to drop the disc when it is ejected.

The playback order is determined by the file name (USB) or

the order in which files were recorded (disc).

This depends on the recording process earlier.

Check whether the track is a playable format.

( 13)

TROUBLESHOOTING

Symptom

“CANNOT PLAY” flashes and/or connected device cannot be detected.

“READING” keeps flashing. • Do not use too many hierarchical levels and folders.

The iPod/iPhone does not turn on or does not work.

“ADDERROR” “SEARCHERR”

“CHKDEVICE” Check the Pandora application on your device.

“NOSKIPS” The skip limit has been reached.

“NOSTATIONS” No stations are found.

“STATIONLIM” The number of registered stations has reached its limit. Retry

Pandora

“UPGRADEAPP” Make sure you have installed the latest version of the Pandora

“CONNECT ERR” Communication is unstable.

“RATING ERR” Registration of thumbs up/thumbs down has failed.

“LICENSE ERR” You try to access from a country which Pandora is not

Remedy

• Check whether the connected device is compatible with this unit and ensure the files are in supported formats.

• Reattach the device.

• Reload the disc or reattach the USB device.

• Check the connection between this unit and iPod/iPhone.

• Detach and reset the iPod/iPhone using hard reset.

New station creation is unsuccessful.

after deleting unnecessary stations from your device.

application on your device.

deliverable.

( 13)

Symptom Remedy

Station cannot be selected.

“CREATE ERR” Custom station name creation is unsuccessful.

“SAVE ERROR” Addition to the favorite category failed.

“DISCONNCTD” Check the connection to the device.

“NOSKIPS” The skip limit has been reached. Retry later.

“NOSTATIONS” No stations are found.

“NOT CONNCTD” Link to the application is impossible.

“UPDATE APP” Make sure you have installed the latest version of the iHeart Link

iHeartRadio

“PLS LOGIN” You haven’t log in. Log in again.

“STATION NOT AVAILABLE”

“STATION NOT SELECTED”

“STREAM ERR” Broadcast data is interrupted.

“THUMBS ERR” Registration of Thumbs Up/Down has failed.

“TIMED OUT” The request has resulted in time-out.

If “Explicit Content” in [Account Settings] is checked in the web version of iHeartRADIO, custom stations become unavailable.

for JVC application on your device.

Broadcast from the station is over.

No station is selected.

If you have any troubles, try the following:

1 Check TROUBLESHOOTING 2 Reset the unit ( 3) 3 Contact (USA only) Call: 1-800-252-5722 ( or ) visit: http://www.jvc.com

ENGLISH |

Warning

• The unit can only be used with a 12V DC power supply, negative ground.

• Disconnect the battery’s negative terminal before wiring and mounting.

• Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit.

• Insulate unconnected wires with vinyl tape to prevent a short circuit.

• Be sure to ground this unit to the car’s chassis again after installation.

Caution

• For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.

• Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.

• Do not connect the (black), or connect them in parallel.

• Connect speakers with a maximum power of more than 50W. If the maximum power of the speakers is lower than 50W, change the

[AMP GAIN]

•

Mount the unit at an angle of less than 30º.

• If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box

INSTALLATION / CONNECTION

which provides 12 V DC power supply and is turned on and off by the ignition key.

• After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.

• If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse with one that has the same rating.

wires of speakers to the car chassis or Ground wire

setting to avoid damaging the speakers. (

12)

Basic procedure 1

Remove the key from the ignition switch, then disconnect the

terminal of the car battery.

2 Connect the wires properly.

See Wiring connection.

(17)

3 Install the unit to your car.

See Installing the unit (in-dash mounting).

4 Connect the terminal of the car battery. 5 Reset the unit.

(3)

Installing the unit (in-dash mounting)

Hook on the top side

Orientate the trim plate as illustrated before fitting.

When installing without the mounting sleeve

Use only the specified screws. Using wrong screws

might damage the unit.

Flat or round head screws (not supplied) M5 × 8mm (M5 × 3/8")

Pocket

Bracket (not supplied)

Do the required wiring.

(17)

Dashboard of your car

Bend the appropriate tabs to hold the sleeve firmly in place.

How to remove the unit

+ 36 hidden pages

JVC KD-SR60, KD-SR40 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual