JVC KD-DV4402, KD-DV4401 Instruction Manual

DVD/CD RECEIVER

KD-DV4402/KD-DV4401

For canceling the display demonstration, see page 5.

ENGLISH

For installation and connections, refer to the separate manual.

INSTRUCTIONS

BEDIENUNGSANLEITUNG

GET0514-001A

[E]

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

ENGLISH

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

WARNINGS:

[European Union only]

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

For safety...

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

(To prevent accidents and damage)

• DO NOT install any unit or wire any cable in a location where;

– it may obstruct the steering wheel and

gearshift lever operations.

– it may obstruct the operation of safety

devices such as air bags.

– it may obstruct visibility.

• DO NOT operate the unit while driving.

• If you need to operate the unit while driving, be sure to look around carefully.

• The driver must not watch the monitor while driving.

If the parking brake is not engaged,

“DRIVER MUST NOT WATCH THE MONITOR WHILE DRIVING.” appears on the monitor, and no playback picture will be shown.

– This warning appears only when the

parking brake lead is connected to the parking brake system built in the car (refer to the Installation/Connection Manual).

How to reset your unit

• Your preset adjustments will also be erased.

How to forcibly eject a disc

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

How to use functions mode

If you press M MODE, the unit goes into functions mode, then the number buttons and 5/∞ buttons work as different function buttons.

[Within 5 seconds...]

CONTENTS

INTRODUCTIONS

Playable disc type ........................................ 4

Preparation .................................................. 5

OPERATIONS

Basic operations

• Using the control panel ............................... 6

• Using the remote controller (RM-RK252) .... 7

Listening to the radio ................................... 10

Searching for FM RDS programme

—PTY Search ........................................... 11

Disc operations ............................................. 13

• Operations using the control panel ............. 14

• Operations using the remote controller

(RM-RK252) ................................................ 16

EXTERNAL DEVICES

Listening to the other external

components .............................................. 22

SETTINGS

Selecting a preset sound mode .................... 22

General settings — PSM ............................. 24

Disc setup menu ........................................... 26

ENGLISH

Caution on volume setting

Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.

Caution for DualDisc playback

The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.

REFERENCES

More about this unit .................................... 28

Maintenance ................................................ 33

Troubleshooting ........................................... 34

Specifications ............................................... 36

For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on the unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.

Playable disc type

Disc type Recording format, file type, etc Playable

DVD DVD-Video (Region Code : 2) *

ENGLISH

DVD-Audio

DVD-ROM

DVD Recordable/Rewritable (DVD-R/-RW *

, +R/+RW *3)

• DVD Video: UDF bridge

• DVD-VR

• DivX/MPEG-1/MPEG-2/MP3/ WMA/WAV: ISO 9660 level 1, level 2, Romeo, Joliet

DVD-Video

DVD-VR

DivX/MPEG1/MPEG2

MP3/WMA/WAV

AAC

JPEG/MPEG4

DVD+VR

DVD-RAM

Dual Disc DVD side

Non-DVD side

CD/VCD Audio CD/CD Text (CD-DA)/DTS-CD *

VCD (Video CD)

SVCD (Super Video CD)

CD-ROM

CD-I (CD-I Ready)

CD Recordable/Rewritable (CD-R/-RW)

• ISO 9660 level 1, level 2, Romeo, Joliet

CD-DA

VCD (Video CD)

DivX/MPEG1/MPEG2

MP3/WMA/WAV

AAC

JPEG/MPEG4

If you insert a DVD Video disc of an incorrect Region Code, “REGION CODE ERROR” appears on the monitor.

* *2 DVD-R recorded in multi-border format is also playable (except for dual layer discs). DVD-RW dual layer discs are not

playable.

*3 It is possible to play back finalized +R/+RW (Video format only) discs. +RW double layer discs are not playable. *4 To reproduce DTS sound, use the DIGITAL OUT terminal (see also pages 27 and 31).

Preparation

Cancel the display demonstration and set the clock

• See also page 24.

Turn on the power.

ENGLISH

When the power is turned off: Check the current clock time When the power is turned on: Change the display information

Indication language:

In this manual, English indications are used for purposes of explanation. You can select the indication language on the monitor on the “LANGUAGE” setting (see page 26).

Detaching the control panel Attaching the control panel

Enter the PSM settings.

Cancel the display demonstrations

Select “DEMO,” then “DEMO OFF.”

Set the clock

Select “CLOCK HOUR,” then adjust the hour. Select “CLOCK MIN” (minute), then adjust the minute. Select “24H/12H,” then “24 HOUR” or “12 HOUR.”

Finish the procedure.

5INTRODUCTIONS

Basic operations

Using the control panel

ENGLISH

1 DISC: Select title/program/playlist/folder. 2 Eject disc. 3 • Turn on the power.

• Turn off the power [Hold].

• Attenuate the sound (if the power is on).

4 Volume control [Turn]. 5 Remote sensor 6 • FM/AM: Select the band.

• DISC: Start/pause playback.

7 Loading slot 8 Display window 9 • Activate/deactivate TA Standby Reception.

• Enter RDS programme search [HOLD].

p Change the display information. q Detach the panel. w Select the source.

FM/AM = DISC * = AUX IN = LINE IN

= (back to the beginning)

e • FM/AM: Search for station.

• DISC: Select chapter/track.

r • Adjust the sound mode.

• Enter the PSM settings [Hold].

t Enter functions mode.

• Press M MODE, then one of the following buttons (within 5 seconds)...

EQ : Select the sound mode. MO : Turn on/off monaural reception. SSM : Automatic station presetting [Hold]. RPT : Select repeat play. RND : Select random play. 5/∞ : Skip 10 chapters/tracks.

y • FM/AM: Select preset station.

• DISC: Select chapter/title/program/folder/track.

u AUX (auxiliary) input jack

* You cannot select “DISC” as the playback source if there

is no disc in the unit.

Display window

ENGLISH

1 Tr (track) indicator 2 Source display / Track number / Folder number /

Disc number / Title number / PBC indicator / Time countdown indicator

3 DISC indicator 4 RDS indicators—AF, REG, TP, PTY 5 Playback mode / item indicators— RND (random),

(disc), (folder), RPT (repeat)

6 Tuner reception indicators—ST (stereo),

MO (monaural)

7 Sound mode (c-EQ: custom equalizer) indicators

—CLASSIC, HIP HOP, JAZZ, ROCK, POPS, USER

8 LOUD (loudness) indicator 9 EQ (equalizer) indicator p Disc information indicators—

TAG (Tag information), (folder), (track/file)

q Main display (Time, menu, playback information)

Using the remote controller (RM-RK252)

Installing the battery

R03/LR03/AAA

Insert the batteries into the remote controller by matching the polarity (+ and –) correctly.

• If the effectiveness of the remote controller decreases, replace both batteries.

Before using the remote controller:

• Aim the remote controller directly at the remote sensor on the unit.

• DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).

Caution:

Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.

Continued on the next page

7OPERATIONS

ENGLISH

1 button

• Turns the power on if pressed briefly or attenuates the sound when the power is on.

• Turns the power off if pressed and held.

2 5/∞ buttons

• FM/AM: Selects the preset stations.

• DISC:

– DVD-Video: Selects the title. – DVD-VR: Selects the program/playlist. – DivX/MPEG Video/MP3/WMA/WAV: Selects

the folders if included.

4 / ¢ buttons

• FM/AM:

– Searches for stations automatically if pressed

briefly.

– Searches for stations manually if pressed and

held.

• DISC:

– Reverse skip/forward skip if pressed briefly. – Reverse search/forward search if pressed and

held.

3 VOL (volume) + / – buttons

• Adjusts the volume level.

2nd VOL (volume) buttons

• Not applicable for this unit.

4 * ASPECT button

• Not applicable for this unit.

5 PHONE button

• Not applicable for this unit.

6 * SETUP button

• Enters disc setup menu (during stop).

7 * TOP M (menu) button

• DVD-Video/DivX: Shows the disc menu.

• DVD-VR: Shows the Original Program screen.

• VCD: Resumes PBC playback.

8 * OSD (on-screen display) button

• Shows the on-screen bar.

9 SHIFT button

• Functions with other buttons.

p DISP (display) button

• Changes the display information.

q 1 / ¡ buttons

• DVD-Video/VCD: Slow motion playback (during pause).

• DivX/MPEG Video/MP3/WMA/WAV: Reverse search/forward search.

w SOURCE button

• Selects the source.

e 3 (play) / 8 (pause) button

• DISC: Starts/pauses playback.

r (end call) button

• Not applicable for this unit.

BAND /

7 (stop) buttons

• FM/AM: Selects the bands.

• DISC: Stops playback.

t * RETURN button

• VCD: Returns to the PBC menu.

y * MENU button

• DVD-Video/DivX: Shows the disc menu.

• DVD-VR: Shows the Playlist screen.

• VCD: Resumes PBC playback.

u * % / ﬁ buttons

• DVD-Video: Makes selection/settings.

@ / # buttons

• DVD-Video: Makes selection/settings.

• DivX/MPEG Video: Skips back or forward by about five minutes.

i * DUAL button

• Not applicable for this unit.

o SURROUND button

• Not applicable for this unit.

DIRECT button

• DISC: Enters direct search mode for chapter/ title/program/playlist/folder/track when pressed with SHIFT button (see page 16 for details).

CLR (clear) button

• DISC: Erases the misentry when pressed with SHIFT button.

* Functions as number buttons/

when pressed with SHIFT button.

(asterisk)/# (hatch)

– FM/AM: Selects the preset stations (1 – 6). – DISC: Enters chapter/title/program/playlist

folder/track number after entering search mode by pressing SHIFT and DIRECT (see page 16 for details).

ENGLISH

ENT (enter) button

• Confirms selection.

9OPERATIONS

Listening to the radio

ENGLISH

Select “FM/AM.”

Select the bands.

Search for a station to listen—Auto Search.

Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly.

• When receiving an FM stereo broadcast with sufficient signal strength, “ST” lights up on the display.

When an FM stereo broadcast is

hard to receive

Reception improves, but stereo effect will be lost.

• “MO” lights up on the display.

To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off.

FM station automatic presetting

— SSM (Strong-station Sequential Memory)

You can preset up to six stations for each band.

1 While listening to an FM station...

Manual presetting

Ex.: Storing FM station of 92.50MHz into preset number

4 of the FM1 band.

Preset number flashes for a while.

To listen to a preset station

Local FM stations with the strongest signals are

searched and stored automatically in the selected FM band.

Searching for FM RDS programme — PTY Search

Storing your favorite programme

types

You can store your favorite PTY codes into the number buttons.

1 Select a PTY code (see right column). 2 Select a preset number.

3 Repeat steps 1 and 2 for storing other PTY

codes.

Activate PTY Search.

ENGLISH

Select one of the PTY codes (programme types).

See the following for details.

Start searching.

If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in.

Preset PTY codes in the number buttons (1 to 6):

PTY codes (available with the control dial):

NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music), DOCUMENT

Continued on the next page

11OPERATIONS

Activating/deactivating TA/PTY Standby Reception

TA Standby Reception Indicator PTY Standby Reception Indicator

to activate.

Press

ENGLISH

The unit temporarily will switch to Traffic Announcement (TA), if available, from any source other than AM. The volume changes to the preset TA volume level if the current level is lower than the preset level (see page 25).

Not yet activated. Tune in to another station providing the RDS signals.

to deactivate.

Press

Lights up The unit temporarily will switch to your

Flashes Not yet activated. Tune in to another

Goes off Select “OFF” for the PTY code (see page 25)

See page 25.

favorite PTY programme from any source other than AM.

station providing the RDS signals.

to deactivate.

Tracing the same programme—Network-Tracking Reception

When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration on the right).

When shipped from the factory, Network-Tracking Reception is activated.

To change the Network-Tracking Reception setting, see “AF-REG” on page 25.

Programme A broadcasting on different frequency areas (01 – 05)

Lights up

Flashes

Goes off

Automatic station selection—Programme Search

Usually when you press the number buttons, the preset station is tuned in. If the signals from the FM RDS preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency broadcasting the same programme as the original preset station is broadcasting.

• The unit takes some time to tune in to another station using programme search.

• See also page 25.

+ 26 hidden pages