Page 1
DIGIT AL VIDEO CAMERA
GR-DV3000
Please visit our Homepage on the World Wide Web
and answer our Consumer Survey (in English only):
http://www.jvc-victor.co.jp/english/index-e.html
For Accessories:
http://www.jvc-victor.co.jp/english/accessory/
INSTRUCTIONS
ENGLISH
CONTENTS
AUTOMATIC DEMONSTRATION
GETTING STARTED
BASIC RECORDING
Recording On Tape ...............................
Recording On Memory Card ...................
Recording On Tape And Memory Card ......
BASIC PLAYBACK
Playback From Tape..............................
Playback From Memory Card ..................
USING MENUS FOR
DETAILED ADJUSTMENT
ADVANCED FEATURES
CONNECTIONS
Basic Connections ................................
Advanced Connections ..........................
DUBBING
Dubbing To A VCR ................................
Dubbing From A VCR ............................
Dubbing To Or From A Video Unit
Equipped With A DV Connector .............
Dubbing Still Images Recorded
On A Tape To A Memory Card ...............
USING THE REMOTE
CONTROL UNIT
Slow-Motion Playback, Frame-By-Frame
Playback and Playback Zoom ...............
Playback Special Effects ........................
Random Assemble Editing .....................
For More Accurate Editing ......................
Insert Editing .......................................
Audio Dubbing .....................................
TROUBLESHOOTING
USER MAINTENANCE
INDEX
Jack Box ............................................
Controls, Connectors And Indicators .......
Indications .........................................
CAUTIONS
TERMS
SPECIFICATIONS
8 – 17
18 – 24
25 – 27
28 – 33
34 – 53
54 – 57
58 – 61
62 – 73
74 – 79
81 – 88
89 – 91
92 – 93
94 – 95
7
18
21
22
25
26
54
56
58
59
60
61
64
65
66
70
71
72
80
81
82
84
LYT0940-001A
EN
Page 2
EN
59
Power Switch
Connector
cover**
S-Video
cable
(provided)
* Connect when an S-Video cable is not used.
** When connecting the cables, open this cover.
To
S-VIDEO
Audio/Video cable
[mini-plug to
RCA plug]
(provided)
To Audio, Video* and
S-Video connectors
Cable Adapter
(not provided)
If your VCR has a
SCART connector,
use a commercially
available output cable
adapter.
VCR (Playback deck)
TV
Dubbing From A VCR
[To Use This Camcorder As A Recorder]
1 Make sure all units are turned of f, then connect
the camcorder and the VCR as shown in the
illustration. Also refer to pg. 54 and 55.
2 Set “SOUND MODE” to “12 BIT” or “16 BIT” and
To
AV
“REC MODE” to “SP” or “LP” in the Menu Screen
depending on your preference (
墌 pg. 32).
3 Set the camcorder’s Power Switch to “ ” while
pressing down the Lock Button located on the switch.
Turn on the VCR’s power and insert the appropriate
cassettes in the camcorder and the VCR.
4 Set “S/AV INPUT” to “ON” in the Menu Screen to
engage the analogue input mode (
墌 pg. 32).
5 Press the Recording Start/Stop Button on the
camcorder to engage the Record-Pause mode.
“
” appears on the screen.
A V . IN
6 Engage the VCR’ s Play mode, then engage the
Still Playback mode when you have found a spot just
before the edit-in point.
7 Press the Recording Start/Stop Button on the
camcorder to engage the Record mode.
on the screen. Engage the VCR’s Play mode.
rotates
8 To stop dubbing, press the Recording Start/Stop
Button on the camcorder so that
then engage the VCR’s Stop mode.
stops rotating,
9 Repeat steps 6 through 8 for additional editing.
10
Set “S/A V INPUT” back to “OFF” in the Menu
Screen to disengage the analogue input mode
(
墌 pg. 32).
NOTES:
● To use an output cable adapter (commercially
available), refer to its instructions.
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
墌 pg. 9).
pack (
● Analogue signals can be converted to digital signals
with this procedure.
● It is also possible to dub from another camcorder.
Loading...