JVC AV-20FD24 User Manual

TV/DVD COMBO USER'S GUIDE

®

For model:

AV-20FD24

POWER

TV CATV

DISPLAY

PLAY MODE

SLEEP TIMER

AUDIO

TITLE

123

SUBTITLE

456

JUMP

789

C.C.

RETURN

ANGLE

0

REPEATA-BRETURN

MARKER ZOOM

–

SLOW

+

CANCEL

LIGHT

SELECT

MUTING

/ENTER

+

CH

VOL–VOL

INPUT

+

CH

–

DVD SETUP

TV MENU

DVD MENUTV/DVDNEXTPREV

B.SEARCH F.SEARCHPLAY

PAUSE/STILLSTOPOPEN/CLOSE

TV / DVD

IMPORTANT NOTE TO THE CUSTOMER:

In the space below, enter the serial number for your

television (located on the rear of the television cabinet).

Staple your sales receipt or invoice to the inside cover of this guide.

Keep this user's guide in a convenient place for future reference.

Keep the carton and original packaging for future use.

Serial Number

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance with

the FCC Rules could void the user's authority to operate this equipment.

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.

Location of the required Marking

The rating sheet and the safety caution

are on the rear of the unit. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER'S GUIDE CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONT ACT A JVC A UTHORIZED SER VICE CENTER.

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NO T TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MA Y BE PRESENT WHEN THE ENCLOSURE IS OPENED . DO NOT STARE INTO BEAM.

2

VIDEO

(MONO)

UHF/ VHF

AUDIO

DIGITAL

R

AUDIO OUT

COAXIAL

LINE IN 1

CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning the exterior cabinet only.

6. ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

8. ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit.

8A. An appliance and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

9. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation, and to ensure reliable operation of the unit, and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installations such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10. POWER SOURCES

This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug, if your unit is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

PORTABLE CART WARNING

(symbol provided by RETAC)

S3126A

3

IMPORTANT SAFEGUARDS (Continued)

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13. LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

18. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. DAMAGE REQUIRING SERVICE

Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the

unit to its normal operation. e. If the unit has been dropped or the cabinet has been damaged. f

. When the unit exhibits a distinct change in performance, this indicates a need for service.

20. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

21. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

22. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

23. DISC TRAY

Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.

24. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.

25. SOUND VOLUME

Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume sound may cause hearing or speaker damage.

4

26. SOUND DISTORTION

Do not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire.

27. HEADPHONES

When you use the headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage.

28. LASER BEAM

Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage.

29. DISC

Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.

30. NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

ANTENNA LEAD IN WIRE

GROUND CLAMP

ELECTRIC SERVICE

EQUIPMENT

NEC-NATIONAL ELECTRICAL CODE S2898A

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING

ELECTRODE SYSTEM (NEC ART 250, PART H)

CONDENSATION

Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player's performance will be impaired. To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner. In such cases, change the location of the player.

Power Source

AC Outlet

Wider Hole and Blade

Polarized AC Cord Plug (One blade is wider than the other.)

TO USE AC POWER SOURCE

Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet.

NOTES:

Never connect the AC line cord plug to other than the specified

•

voltage (120V 60Hz). Use the attached power cord only. If the polarized AC cord does not fit into a non-polarized AC

•

outlet, do not attempt to file or cut the blade. It is the user’s responsibility to have an electrician replace the obsolete outlet. If you cause a static discharge when touching the unit and the

•

unit fails to function, simply unplug the unit from the AC outlet and plug it back in. The unit should return to normal operation.

5

Features

Color TV With DVD/CD player

Unique space saving design combines a 20" flat color TV and a DVD/CD player. The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture/Audio quality of the DVD exceeds other software. Picture quality is higher than Super VHS. Audio quality is higher than audio CD. The DVD also has special options; audio language selection, subtitle language selection or multi-angle, etc. The DVD PLAYER can play back audio CDs.

High Quality Picture

Horizontal Resolution

More than 500 lines. It exceeds Super VHS (400 lines) or Laser Disc (430 lines) in resolution.

Compatible with a wide range of DVD audio outputs

Digital Audio Jack (Coaxial)

• When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the effect of being in a movie theater or a concert hall.

• Surround standard different from Dolby Digital. This format is already in use in many theaters. By connecting this unit to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs recorded in this format can be enjoyed. However, audio will not be output from the analog audio output jacks.

• By connecting this unit to an AV amplifier with a built-in MPEG decoder, the MPEG audio of DVD discs recorded in this format can be enjoyed.

• The Linear PCM sound of a 48 kHz/16 bit through 96 kHz/20 bit exceeds audio CD sound.

Convenience Features

Frame Advance - The PAUSE/STILL moves one frame at a time. Slow Motion - The SLOW moves you back and forth through the program by 4 steps of 1/8-1/2 times. Repeat Playback - You can repeat chapter track or title between two selected points. Program Playback - You can play back tracks in programmed sequences. Zoom (DVD only) - You can zoom in the selected subject on the screen during playback.

Note: Make sure that discs are suitable for the following functions. Multi-Language - Maximum 32 language subtitles and maximum 8 language soundtracks can be played back for

movies or programes. Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc, you can change the angles during playback.

Parental Control - You can limit the play back of scenes or sounds of adult DVD discs which have parental level. Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor.

TV Features

Flat Picture Tube - It reduces the influence of surrounding light resulting in outstanding image detail and clarity. 181 Channel Tuner - Receives standard VHF and UHF broadcast channels and up to 113 cable channels. The

actual number of channels received depends upon channel reception in your area or your cable system. Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS. Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed up to 120 minutes to turn off automatically. On-Screen 3 Language Display - You can select one of 3 languages, English, Spanish or French for on-screen programming. V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded with this information. V-chip will allow you to set a restriction level.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

6

• As an “ENERGY STAR®” partner, JVC has determined that this product or product model meets the “ENERGY STAR®” guidelines for energy efficiency.

ENER Y STAR

IMPORTANT RECYCLING INFORMATION

This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information, please contact your local authorities, or the Electronic Industries Alliance: http://www.eiae.org

Contents

Before using your unit

IMPORTANT SAFEGUARDS ........................3

Power source .................................................5

Features .........................................................6

Contents ......................................................... 7

Parts and functions ........................................ 8

Remote control ............................................... 9

Antenna connections....................................11

Cable TV connections ..................................12

TV operation

Setting the language ....................................13

TV operation.................................................14

Closed captions............................................16

To memorize channels ................................. 17

Setting the V-Chip ........................................19

Picture control adjustment............................22

Stereo and separate audio program (SAP) .. 23

Sound control adjustment ............................ 24

Playback operation

Disc ..............................................................25

Preparation/Status display of disc ................ 26

Playback procedure ..................................... 27

Special playback ..........................................28

MP3 playback...............................................29

Advanced Function

Zooming/Locating desired scene .................30

Repeat, Random and Program playback/

Repeat A-B ................................................... 31

Marking desired scenes ...............................32

Changing soundtrack language/Subtitles.....33

Changing angles/Title selection/DVD menu

...34

Additional Information

Setting language ..........................................35

Setting the aspect ratio of TV screen/

Setting on screen display .............................36

Dynamic Range Control ...............................37

Parental control setting ................................ 38

To change the parental level ........................ 39

Temporary disabling of rating level by

DVD disc ......................................................40

Language code list .......................................41

Connections to other equipments ................ 42

Problems and troubleshooting ......................

Reception disturbances................................46

Specifications ...............................................47

Appendix (Remote programming) ................48

44

7

VOLUME

POWER STOP

POWER

PREVIOUS PLAY NEXT OPEN/CLOSE

CHANNEL

VIDEO

LINE 2 IN

L/MONO AUDIO R

Parts and functions

Front

PREVIOUS button NEXT button

STOP button

Power indicator

Remote sensor

Disc tray

OPEN/CLOSE button

HOW TO OPEN THE FRONT DOOR

Rear

POWER button

Headphone Jack

VOLUME +/– buttons

CHANNEL +/– buttons

AUDIO (L/R)/VIDEO IN jacks (LINE 1)

VIDEO

(MONO)

AUDIO

R

DIGITAL

AUDIO OUT

COAXIAL

LINE IN 1

AUDIO (L/R)/VIDEO IN jacks

(LINE 2)

PLAY button

RF IN jack

UHF/

VHF

8

VIDEO

(MONO)

UHF/ VHF

AUDIO

DIGITAL

R

AUDIO OUT

COAXIAL

LINE IN 1

AC power cord

COAXIAL DIGITAL AUDIO OUT jack

Remote control

SLEEP TIMER

0

CANCEL

VOL

POWER

DISPLAY

AUDIO

RETURN

LIGHT

SELECT

/ENTER

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

PAUSE/STILLSTOPOPEN/CLOSE

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

ANGLE

MARKER ZOOM

C.C.

– SLOW +

MUTING

VOL

–

TV MENU

B.SEARCH F.SEARCHPLAY

TV / DVD

123

456

789

REPEATA-B RETURN

+

CH

INPUT

CH

–

Page

TV/CATV switch Switch to operate TV or CATV 10,48 POWER Power on/off 10,13,14,26 PLAY MODE Select playback mode 31 DISPLAY Call information 15,26 AUDIO (for DVD) Change sound track language of DVD 33 SLEEP TIMER Set sleep timer 15 AUDIO (for TV) Switch the sound of TV 23 TITLE Select title 34 0-9 Direct channel selection of TV 14,18

Input setting 29~31

Enter a password 19,21,38~40 SUBTITLE Set Subtitle 33 JUMP Locating desired scene 30 ANGLE Change playback angle 34 C.C. Switch between TV/Caption/Text in

Closed Caption mode 16 RETURN (for TV) Switch between present/last channels 15 MARKER Index 32 ZOOM Zoom 30 REPEAT A-B Repeat playback between A and B 31 RETURN (for DVD) Remove DVD set up menu 35~40 SLOW +/– Forward/Reverse-slow motion 28 CANCEL Reset information in the menu LIGHT Turn the illumination on for CH and VOL 10 MUTING Turn the sound on and off 14 SELECT/ENTER Enter information in the menu 13,19,21,

Select option in the menu 27,29~32,34~40 CH +/– (▲▼) Select channel of TV 10,15

Cursor buttons 13,17~22,24,27,29,30,32,34~39 VOL +/– (

INPUT Switch between TV channel/LINE 43 TV MENU Display menu of TV setup 13,17~22,24 DVD SETUP Display menu of DVD setup 35~39 PREV/NEXT Skip chapter to forward or reverse direction 28 TV/DVD Switch between the TV mode/DVD mode 10,26 DVD MENU Display menu of DVD software 34 B.SEARCH/F.SEARCH Fast Forward/Review playback 28 PLAY Playback 27~29,31,34,40 OPEN/CLOSE Open the tray/ Close the tray 27,29,40 STOP Stop 27,29,31 PAUSE/STILL Pause CD sound/Still picture of DVD 28

) Adjust volume 10,14

Cursor buttons 13,17~22,24,27,29,30,32,34~39

22,24,30~32,38,39

9

Remote control

Inserting Batteries

Slide the battery compartment

1

cover in the direction of the arrow.

Install two “AA” batteries

23

(supplied), paying attention to the polarity diagram in the battery compartment.

Replace the compartment cover.

BATTERY PRECAUTIONS

The precautions below should be followed when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.

3.

Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

6.When you change the batteries, try to complete the task within three minutes. If you take longer than three minutes, the remote control codes for your Cable Box may have to be reset (see page 48).

REMOTE CONTROL BASICS

• Before you can operate the remote control, you must first install the batteries (included). See

“Inserting Batteries” on this page above for instructions.

• Press the POWER button to turn the television on or off.

• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you need to operate a cable box.

(You must set the remote control to operate a cable box. Please see page 48 for instructions.)

• Press the CH + and CH – buttons to scan through the channels. Tap the CH + or CH – button to move through

the channels one channel at a time.

• Press VOL + or VOL – to raise or lower the volume. An indicator bar will appear on screen to show you the

television volume level.

• The CH +/– and VOL +/– buttons are also used to navigate JVC’s on screen menu system.

• You can directly access specific channels using the 10-key pad.

• This remote includes illuminated buttons for key features like CH +/– LIGHT button to turn the

• Each press of TV/DVD on the remote control, switches the screen between the TV screen (TV mode) and the DVD screen (DVD mode). You can operate a TV and TV menu in the TV mode, and a DVD and DVD SETUP menu in the DVD mode.

Operation

• Aim the remote control at the remote sensor and

press control buttons to operate.

• Operate the remote control within 30° angle on

either side of the remote sensor, up to a distance of Approx. 5 meters.

illumination on.

buttons, and VOL +/– buttons. Press the

Approx. 5 meters

10

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CATV), see page 12 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)

Connect the 75 ohm Cable from the Combination VHF/UHF Antenna to the Antenna Jack.

75 ohm Coaxial Cable

Antenna

Jack

UHF/

VHF

300-75 ohm Matching Transformer (not supplied)

Antenna

Jack

UHF/

VHF

If your Combination VHF/UHF Antenna has a 300 ohm Twin-lead Wire, the use of the 300-75 ohm Matching Transformer may be necessary.

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)

Connect the UHF 300 ohm Twin-lead Wire to the

Antenna

Jack

UHF/

VHF

Combiner

(not supplied)

UHF 300 ohm

300-75 ohm Matching Transformer (not supplied)

Combiner (not supplied). Connect the VHF 300 ohm Twin-lead Wire to the 300-75 ohm Matching Transformer. Attach the Transformer to the Combiner, then attach the Combiner to the Antenna Jack.

VHF 300 ohm

Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires)

Antenna

Jack

UHF/

VHF

Combiner

VHF 75 ohm

UHF 300 ohm

Connect the VHF 75 ohm cable and UHF 300 ohm Twin-lead Wire to the Combiner. Attach the Combiner to the Antenna Jack.

11

Cable TV connections

This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.

FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE

For basic cable service not requiring a Converter/Descrambler box, connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the TV/DVD.

75 ohm Coaxial Cable

Antenna

Jack

UHF/ VHF

FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE

If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV/DVD. Follow the connections shown below. Set the TV/DVD to the output channel of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to select channels.

Incoming 75 ohm CATV Cable

Converter/

Descrambler

75 ohm Cable to TV/DVD

Antenna

Jack

UHF/ VHF

FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH SCRAMBLED PREMIUM CHANNELS

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from the Cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B” position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A” position, tune your TV/DVD to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/ Descrambler box to tune scrambled channels.

Incoming 75 ohm CATV Cable

Splitter

Converter/

Descrambler

A/B Switch

75 ohm Cable

A

to TV/DVD

B

Antenna

Jack

UHF/ VHF

12

Setting the language

You can choose from three different languages (English, French and Spanish) for the on-screen displays. Adjustment menus and messages will appear in the language of your choice. On-screen language selection (step 5) will automatically appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options.

To turn on the TV/DVD, press POWER. The Power indicator

1

will light.

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

ANGLE

MARKER ZOOM

MUTING

TV MENU

C.C.

–

SLOW

+

VOL

–

B.SEARCH F.SEARCHPLAY

POWER

DISPLAY

SLEEP

TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

/ENTER

+

CH

VOL

INPUT

CH

+

–

DVD SETUP

DVD MENUTV/DVDNEXTPREV

Press TV MENU. The TV menu

2

screen will appear.

Press or until the SET-UP

3

menu appears.

Press

4

“LANGUAGE” option, then press

or to select the

or button.

Press or to select the

5

desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press ENTER.

V-CHIP SET LANGUAGE/IDIOMA/LANGUE

<

/ / / /MENU

V-CHIP SET

LANGUAGE/IDIOMA/LANGUE

<

/ / / /MENU

LANGUAGE/IDIOMA/LANGUE

ENGLISH ESPAÑOL FRANCAIS

<

/ /ENTER/MENU

>

PAUSE/STILLSTOPOPEN/CLOSE

TV / DVD

NOTE:

If the unit does not operate properly,

•

or No key operation (by the unit and/ or the remote control): Static electricity,

etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again. The TV section has its own menu and also

•

DVD section has its own menu (see page

35).

Press TV MENU until the MENU screen is cleared.

13

TV operation

VOLUME 32

CH 012

TV CATV

PLAY MODE

SLEEP

AUDIO

TITLE

SUBTITLE

JUMP

ANGLE

MARKER ZOOM

–

SLOW

MUTING

VOL

–

TV MENU

B.SEARCH F.SEARCHPLAY

TIMER

123

456

789

C.C.

+

0

REPEATA-B RETURN

CANCEL

+

CH

VOL

INPUT

+

CH

–

DVD SETUP

PAUSE/STILLSTOPOPEN/CLOSE

POWER

DISPLAY

AUDIO

RETURN

LIGHT

SELECT

/ENTER

DVD MENUTV/DVDNEXTPREV

To turn on the TV/DVD, press

1

POWER. Adjust the volume level by

2

pressing VOL + or –. The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases.

Set the TV/CATV menu

3

option to the appropriate position. (See page 17.)

Press the Direct Channel selection

4

buttons to select the channel.

TV Mode Direct Channel Selection

When the TV/CATV menu option is in the TV position, all channels can be instantly selected by using two buttons. (for example, to select channel 2, press “0”, then “2”. If you press only “2”, channel selection will be delayed for a few seconds.) For channels 10 and above, press the 2 digits in order.

CATV Mode Direct Channel Selection

When the TV/CATV menu option is in the CATV position, channels can be selected as follows: TO SELECT CATV CHANNELS: 1-9: Press “0” twice, then 1-9 as needed. Example, to select

channel 2, press “002”.

10-12: Press “0”, then the remaining 2 digits. Example, to

select channel 12, press “012”.

13-99: Press the 2 digits in order. Example, to select channel

36, press “36”.

100-125: Press the 3 digits in order. Example, to select channel

120, press “120”.

TV - VHF/UHF channels CATV - CABLE TV channels

NOTE FOR CHANNELS 1-12:

If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.

TV / DVD

NOTES:

If a channel with no broadcast is

•

selected, the sound will automatically be muted. If a station being viewed stops

•

broadcasting, the TV will automatically shut itself off after 15 minutes.

14

MUTING

The MUTING button instantly turns the volume down completely when you press it. Press MUTING button and the volume level will instantly go to zero. To restore the volume to its previous level, press MUTING button again.

SLEEP

120

TV CATV

POWER

CHANNEL UP/DOWN

Press and release CH + or –. The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See pages 17 and 18 “To memorize channels”

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

ANGLE

MARKER ZOOM

MUTING

TV MENU

C.C.

–

SLOW

+

VOL

–

B.SEARCH F.SEARCHPLAY

TV / DVD

DISPLAY

SLEEP TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

+

CH

INPUT

CH

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

PAUSE/STILLSTOPOPEN/CLOSE

DISPLAY

Press DISPLAY to display the current informations on the screen. Press DISPLAY again to disappear the call display.

• Channel number or VIDEO mode

• Stereo or SAP (second audio

program) audio status

• Audio output status

RETURN

This button allows you to go back to the last channel selected by pressing RETURN. Press RETURN again to return to the last channel you were watching.

SLEEP TIMER

To set the TV/DVD to turn off after a preset amount of time, press SLEEP TIMER on the remote control. The clock will count down 10 minutes for each press of SLEEP TIMER (120, 110, ...10, 0). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP TIMER and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press SLEEP TIMER repeatedly until the display turns to 0.

STEREO SAP CH 012

SEL. MONO+SAP

15

Closed captions

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language.

Captions: This Closed Caption Mode will display text on the screen in English or another language (depending on the set-

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

C.C.

ANGLE

MARKER ZOOM

–

SLOW

+

MUTING

VOL

–

POWER

DISPLAY

SLEEP

TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

VOL

+

/ENTER

+

CH

INPUT

ting of the Closed Captions CH 1/2). Generally, Closed Captions in English are transmitted on Captions Channel 1 and Closed Captions in other languages are transmitted on Captions Channel 2.

Text: The Text Closed Caption Mode will usually fill the screen with a programming schedule or other information. After selecting a Closed Caption Mode, it will stay in effect until it is changed, even if the channel is changed. If the Captions signal is lost due to a commercial or a break in the signal, the Captions will reappear when the signal is received again. If the channels are changed, the Captions will be delayed approximately 10 seconds. The Captions will appear in places on the screen where they will least interfere with the picture, usually on the bottom of the screen. News programs will usually show three-line Closed Captions which scroll onto the screen. Most other shows provide two or three lined Captions placed near the character who is speaking so the viewer can follow the dialogue. Words in italics or underlined describe titles, words in foreign languages or words requiring emphasis. Words that are sung usually appear enclosed by musical notes. For television programs broadcasting with Closed Captions, look in your TV guide for the Closed Captions symbol (CC).

CH

TV MENU

–

DVD SETUP

DVD MENUTV/DVDNEXTPREV

TO VIEW CLOSED CAPTIONS

B.SEARCH F.SEARCHPLAY

Press C.C. to switch between normal TV and the two closed

PAUSE/STILLSTOPOPEN/CLOSE

caption modes (captions and full screen text). Closed captioning will display text on the screen for hearing impaired viewers.

TV / DVD

NOTES:

• When selecting Closed Captions, the captioning will be delayed approximately 10 seconds.

• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.

• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with

Closed Captioning, especially with live programs. This is because during live programs, captions are also entered live. These transmissions do not allow time for editing.

• When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with Closed Captions.

• Some cable systems and copy protection systems may interfere with the Closed Captioned signal.

• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or

may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.

16

To memorize channels

This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.

TV/CATV SELECTION

Press TV MENU in the TV mode.

1

TV CATV

POWER

The TV menu screen will appear.

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

C.C.

ANGLE

MARKER ZOOM

–

SLOW

+

MUTING

VOL

–

TV MENU

B.SEARCH F.SEARCHPLAY

DISPLAY

SLEEP TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

+

CH

INPUT

CH

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

Press or until the CHANNEL

2

SETUP menu appears.

Press

3

CATV”.

Press or to select the TV

4

or CATV mode.

or to select the “TV/

TV - VHF/UHF channels CATV - CABLE TV channels

Press TV MENU until the MENU

5

screen is cleared.

-

TV/CATV ADD/DELETE AUTO CH MEMORY

<

/ / / /MENU

TV/CATV ADD/DELETE AUTO CH MEMORY

<

/ / / /MENU

TV/CATV TV ADD/DELETE ADD AUTO CH MEMORY

<

/ / / /MENU

CATV ADD

>

CATV ADD

>

TV / DVD

PAUSE/STILLSTOPOPEN/CLOSE

17

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

ANGLE

MARKER ZOOM

MUTING

TV MENU

C.C.

–

SLOW

+

VOL

–

B.SEARCH F.SEARCHPLAY

POWER

DISPLAY

SLEEP TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

+

CH

INPUT

CH

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

PAUSE/STILLSTOPOPEN/CLOSE

AUTOMATIC MEMORY TUNING

Press TV MENU in the TV mode. The TV menu screen

1

will appear. Press or until CHANNEL-SETUP

2

menu appears.

Press or to select the “AUTO

3

CH MEMORY”, then press or . The TV will begin memorizing all the channels available in your area.

Press TV MENU until the MENU

4

screen is cleared.

TV/CATV ADD/DELETE AUTO CH MEMORY

<

/ / / /MENU

TV/CATV ADD/DELETE AUTO CH MEMORY

<

/ / / /MENU

TO ADD/DELETE CHANNELS

Select the desired channel to be

1

memorized or deleted using Direct Channel Selection (0-9), or CH + or –.

Press TV MENU in the TV mode.

2

The TV menu screen will appear.

Press or until CHANNEL-

3

SETUP menu appears.

Press or to select the “ADD/

4

DELETE”.

TV/CATV ADD/DELETE AUTO CH MEMORY

<

/ / / /MENU

TV/CATV ADD/DELETE AUTO CH MEMORY

CATV ADD

>

CATV ADD

>

CATV ADD

>

CATV ADD

18

TV / DVD

Press or to select ADD or

5

DELETE, whichever function you want to perform.

Press TV MENU until the MENU

6

screen is cleared.

Repeat steps 1-6 for other channels

7

you want to add or delete.

<

/ / / /MENU

TV/CATV ADD/DELETE AUTO CH MEMORY

<

/ / / /MENU

>

CATV DELETE

Setting the V-Chip

An age limitation can be set to forbid children to see and hear violent scenes or pictures for adults, etc. The TV/DVD corresponds to “TV RATING” and “MOVIE RATING”. To use the V-Chip function, you must register a password.

TO REGISTER PASSWORD

Press TV MENU in the TV mode. The TV menu

1

screen will appear.

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

C.C.

ANGLE

MARKER ZOOM

–

SLOW

+

MUTING

VOL

–

TV MENU

B.SEARCH F.SEARCHPLAY

POWER

DISPLAY

SLEEP TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

+

CH

INPUT

CH

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

PAUSE/STILLSTOPOPEN/CLOSE

Press or until the SETUP

2

menu appears.

Press or to select the “V-

3

CHIP SET”, then press

Enter the password (4 digits)

4

using Direct Channel Selection (0-9), then press ENTER.

Enter the same password again

5

for the safety, then press ENTER. Now the password was registered and V-Chip setting menu will appear on the display.

V-CHIP SET LANGUAGE/IDIOMA/LANGUE

<

/ / / /MENU

>

or .

V-CHIP SET LANGUAGE/IDIOMA/LANGUE

<

/ / / /MENU

V-CHIP SET

NEW PASSWORD

<

0 9/ENTER/CANCEL/MENU

>

:

“ ” appears instead of the number.

V-CHIP SET

CONFIRM PASSWORD :

>

TV / DVD

NOTES:

If you forget the password, you can-

•

not set the V-Chip. To avoid forgetting the password, write

•

it down and keep in the safe place.

<

0 9/ENTER/CANCEL/MENU

>

19

CAN ENG RATING CAN FRE RATING CHANGE PASSWORD

: OFF : OFF

<

/ / / /MENU

>

MOVIE RATING

V-CHIP SET V-CHIP US TV RATING

: G

: OFF : OFF

<

/ / / /MENU

>

MOVIE RATING

V-CHIP SET V-CHIP US TV RATING

: OFF

: OFF : TV-Y

CAN ENG RATING CAN FRE RATING CHANGE PASSWORD

: OFF : OFF

Setting the V-Chip (Continued)

CAN ENG RATING CAN FRE RATING CHANGE PASSWORD

: G : OFF

<

/ / / /MENU

>

MOVIE RATING

V-CHIP SET V-CHIP US TV RATING

: OFF

: OFF : OFF

TO SET THE V-CHIP

In the V-CHIP SET menu, press

1

or to select the “US TV

RATING”.

Press or to display the

2

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

–

SLOW

VOL

–

C.C.

+

ANGLE

MARKER ZOOM

MUTING

TV MENU

POWER

DISPLAY

SLEEP

TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

+

CH

INPUT

CH

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

desired setting.

OFF : US TV RATING is not set TV-Y : All children TV-Y7 : 7 years old and above TV-G : General Audience TV-PG: Parental guidance TV-14 : 14 years old and above TV-MA: 17 years old and above

When you select TV- Y7, TV-PG, TV-14 or TV-MA, press DISPLAY to show the contained rating. Press or to select the desired item you want. Press or to select “ON” or “OFF” If you want to back to V-CHIP SET menu, press TV MENU.

3

Press to select

or to select the “MOVIE RATING”. Press or desired rating.

OFF : MOVIE RATING is not set G:All ages PG : Parental guidance PG-13 : Parental guidance

less than 13 years old

R:Under 17 years old

Parental guidance suggested

NC-17 : 17 years old and above X:Adult only

Press or to select the

4

“CAN ENG RATING”, then press

or to select desired rating.

.

B.SEARCH F.SEARCHPLAY

PAUSE/STILLSTOPOPEN/CLOSE

TV / DVD

To use after the TV is protected

When the program applied to the VChip setting is received, enter the password. Protection can be cancelled.

NOTE:

The V-Chip function is activated only on programs and tapes that have the rating signal.

20

E: Exempt

Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.

C: Programming Intended for Children

Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or unrealistic in nature.

C8+: Programming Intended for Children 8 and Over

Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low intensity and will show the consequences of the acts. There will be no offensive language, nudity or sexual content.

G: General Audience

Programming will contain little violence and will be sensitive to themes which could affect younger children.

PG: Parental Guidance

Programming intended for a general audience, but which may not be suitable for younger children. Parents may consider some content not appropriate for children aged 8-13.

14+: 14 Years and Older

Parents are strongly cautioned to exercise discretion in permitting viewing by preteens and early teens. Programming may contain mature themes and scenes of intense violence.

18+: Adult

Material intended for mature audiences only.

Press or to select “V-

5

CHIP”. Press

or to display

“ON” to activate the V-Chip function.

V-CHIP SET V-CHIP

MOVIE RATING CAN ENG RATING CAN FRE RATING CHANGE PASSWORD

: ON : TV-YUS TV RATING : G : OFF : OFF

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

ANGLE

MARKER ZOOM

MUTING

TV MENU

C.C.

–

SLOW

+

VOL

–

B.SEARCH F.SEARCHPLAY

POWER

DISPLAY

SLEEP TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT /ENTER

+

CH

VOL

INPUT

CH

+

–

DVD SETUP

DVD MENUTV/DVDNEXTPREV

PAUSE/STILLSTOPOPEN/CLOSE

Press TV MENU until the MENU

6

screen is cleared.

TO CHANGE PASSWORD

Press TV MENU in the TV mode.

1

The TV menu screen will appear.

Press or until SETUP

2

menu appears.

Press

3

CHIP SET”, then press

Enter the Password using Direct

4

Channel Selection (0-9), then press ENTER.

Press

5

“CHANGE PASSWORD”, then press

or to select the “V-

or .

or to select

or .

<

/ / / /MENU

V-CHIP SET LANGUAGE/IDIOMA/LANGUE

<

/ / / /MENU

V-CHIP SET LANGUAGE/IDIOMA/LANGUE

<

/ / / /MENU

V-CHIP SET

PASSWORD

<

0 9/ENTER/CANCEL/MENU

V-CHIP SET V-CHIP

MOVIE RATING CAN ENG RATING CAN FRE RATING CHANGE PASSWORD

>

::

: ON : TV-YUS TV RATING : G : OFF : OFF

>

TV / DVD

Enter the new password using

6

Direct Channel Selection (0-9), then press ENTER.

Enter the same password again

7

for safety, then press ENTER.

Press TV MENU repeatedly to

8

return to normal screen.

<

/ / / /MENU

CHANGE PASSWORD

NEW PASSWORD

<

0 9/ENTER/CANCEL/MENU

CHANGE PASSWORD

CONFIRM PASSWORD

<

0 9/ENTER/CANCEL/MENU

>

:

>

21

<

/ / / /CANCEL/MENU

>

BRIGHTNESS CONTRAST0+32

0 0 0

COLOR TINT SHARPNESS

<

/ / / /MENU

>

BRIGHTNESS CONTRAST0+32

0 0 0

COLOR TINT SHARPNESS

Picture control adjustment

Picture controls are factory preset but you can adjust them individually as follows:

Press TV MENU in the TV mode. The TV menu

1

screen will appear.

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

–

SLOW

VOL

C.C.

–

ANGLE

MARKER ZOOM

MUTING

TV MENU

POWER

DISPLAY

SLEEP TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

+

CANCEL

LIGHT

SELECT

+

CH

INPUT

CH

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

Press or until PICTURE

2

menu appears.

Press or to select the item

3

you want to adjust.

Press or to adjust the

4

setting.

BRIGHTNESS CONTRAST COLOR TINT SHARPNESS

increase brightness increase contrast be brilliant color be greenish color makes picture clearer

decrease brightness decrease contrast

be pale color be reddish color makes picture softer

B.SEARCH F.SEARCHPLAY

PAUSE/STILLSTOPOPEN/CLOSE

TV / DVD

NOTE:

The CONTRAST default setting is set to maximum at the factory.

22

After your desired setting press

5

TV MENU until the MENU screen is cleared.

CANCEL

Pressing CANCEL while making picture adjustments will return all adjustments to the factory preset levels.

Stereo and separate audio program (SAP)

The TV/DVD is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Separate Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes.

LISTENING TO STEREO SOUND

When the TV is turned on or a

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

C.C.

ANGLE

MARKER ZOOM

–

SLOW

+

MUTING

VOL

–

TV MENU

B.SEARCH F.SEARCHPLAY

POWER

DISPLAY

SLEEP TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

+

CH

INPUT

CH

/ENTER

VOL

+

–

DVD SETUP

DVD MENUTV/DVDNEXTPREV

channel selection is made, make certain the STEREO appears on the screen. This means that “Stereo” broadcasting is available. You can enjoy stereo sound from the left and right speakers.

• When “Mono” broadcasting is

received, no indication is displayed.

• If the broadcast signal is not

strong enough or clear stereo sound is not available, press AUDIO on the center of the remote control to change to mono sound. The noise should be eliminated. Press it again to return to the stereo sound.

LISTENING TO SAP (SEPARATE AUDIO PROGRAM)

When the TV is turned on or a channel selection is made, make certain the SAP appears on the screen. This means that the “Separate Audio Program” broadcasting is available.

TO SELECT DESIRED SOUND

Press AUDIO to select the desired sound.

STEREO CH 013

STEREO SAP CH 013

TV / DVD

PAUSE/STILLSTOPOPEN/CLOSE

SEL. STEREO

MONO+SAP BROADCASTING

MONO SOUND (MAIN)

SAP SOUND

MONO + SAP SOUND (MONO)

STEREO+SAP BROADCASTING

STEREO SOUND (MAIN)

MONO SOUND (MAIN)

SAP SOUND

MONO + SAP SOUND (MAIN)

23

Sound control adjustment

<

/ / / /CANCEL/MENU

>

BASS TREBLE BALANCE

0 0

0 HYPER SURROUND STABLE SOUND ON

OFF

<

/ / / /MENU

>

BASS TREBLE

0 0

0BALANCE HYPER SURROUND STABLE SOUND ON

OFF

Sound controls are factory preset but you can adjust them individually as follows:

Press TV MENU in the TV mode.

1

The TV menu screen will appear.

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

ANGLE

MARKER ZOOM

MUTING

TV MENU

C.C.

–

SLOW

+

VOL

–

B.SEARCH F.SEARCHPLAY

TV / DVD

POWER

DISPLAY

SLEEP

TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

+

CH

INPUT

CH

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

PAUSE/STILLSTOPOPEN/CLOSE

Press

2

menu appears.

Press

3

you want to adjust.

Press or to adjust the setting.

4

BASS:

or until the AUDIO

or to select the item

Press or to adjust the bass sound. TREBLE:

Press

or to adjust the treble sound.

BALANCE:

Press

or to obtain an equal sound level from both

speakers.

HYPER SURROUND: Press or to set the hyper surround feature “ON” or “OFF”. STABLE SOUND:

Press

or to set the stable sound feature “ON” or “OFF”.

Hyper surround feature

The hyper surround feature expands the audio listening field wider and deeper to create exceptional sound quality from the TV’s speakers. The feature uses stereo signals from a TV broadcast or video input.

Stable sound feature

When the loud sound is made, the stable sound feature automatically lower the sound.

24

After your desired setting press TV MENU until the MENU

5

screen is cleared.

CANCEL

Pressing CANCEL while making sound adjustments will return all adjustments to the factory preset levels.

The following types of discs can be played on this unit.

Disc type and logo mark

DVD Video

Audio CD

CD-R/CD-RW

Recordable

ReWritable

Recorded content

Audio

+

Video

Audio

CD-DA/MP3 file

Disc size

5 inches (12 cm)

3 inches (8 cm)

5 inches (12 cm)

3 inches (8 cm)

5 inches (12 cm)

3 inches (8 cm)

• DVD-ROM, Video CD, SVCD, CVD, Photo CD, etc. cannot be played.

• Some CD-R/RWs can not be played back depending on the recording conditions.

• This unit is to be used exclusively with the NTSC color system. PAL and SECAM system discs cannot be used with this unit.

Region Number

Region number (Regional restriction code) is built-in to the unit and DVD video discs. Region number “1” or “ALL” of DVD video discs can be used on this unit.

Disc

1

Title

When two or more movies are recorded on a disc, the disc is divided into two or more sections. Each section is called a “TITLE”.

CHAPTER 1

Chapter

The titles can be subdivided into many sections. Each section is called a “CHAPTER”.

Audio CD Track

An Audio CD can contain several items. These are assigned to the tracks.

TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5

Removing Disc from Case

Be sure to hold the edge of disc. Do not touch the surface of the disc. Pick up the disc gently from the case.

• Do not scratch the disc.

• Do not get dirt on the surface of the disc.

• Do not stick a label or adhesive tape on the disc.

• Do not drop or bend the disc.

Storing Disc

• Store the disc in the case to avoid risk of scratches, dirt or damage.

• Do not leave disc exposed to direct sunlight or in hot or humid places.

Cleaning Disc

Wipe the disc with a clean, dry cloth from center to edge.

• Do not wipe the disc round.

• Do not use liquid or aerosol cleaners.

DVD DISC

TITLE1 TITLE2

CHAPTER 2 CHAPTER 2 CHAPTER 3CHAPTER 1

CD

Audio CD

25

Preparation/Status display of disc

The following pages describe the setup/operation in DVD mode.

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

C.C.

ANGLE

MARKER ZOOM

–

SLOW

+

MUTING

VOL

–

TV MENU

B.SEARCH F.SEARCHPLAY

123

456

789

+

CH

INPUT

CH

–

POWER

DISPLAY

SLEEP TIMER

AUDIO

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT /ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

Preparation

Before DVD/CD operation, please make preparations as follows.

Insert the AC cord plug into a standard 120V 60Hz polarized

1

AC outlet.

• If the AC cord plug is plugged in for the first time, wait for

about 5 seconds before pressing POWER.

NOTE: When connecting to other equipment, unplug the unit from the AC outlet.

Press POWER on the unit or on the remote control to turn on

2

the unit. The POWER indicator will light.

• Every time you press POWER, the TV/DVD starts from TV

mode.

• When using an amplifier, switch on the amplifier.

Press TV/DVD to select DVD

3

mode. The DVD startup screen will appear on the screen.

Status display of disc

Press DISPLAY. The status display of the disc will appear on the screen.

DVD

Title elapsed playing time

1/19

C

0:07:18 2:02:31

1/8 Eng

Title total time

1/1

Camera angle

Disc operation

Title number

Chapter number

1/8

T

1/8 Eng DolbyDigital

PAUSE/STILLSTOPOPEN/CLOSE

TV / DVD

NOTE: If the unit does not operate properly:

Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again.

26

Audio language

A kind of audio

Subtitle language

To make status display disappear, press DISPLAY again.

Audio CD

Track elapsed playing time

Disc operation

Track number Play list

1/8

T

0:02:31 0:53:09

Playlist 12345678

Track total time

• When you play a CD disc, the status display will appear and remain on the screen.

TV CATV

POWER

Playback procedure

Press OPEN/CLOSE on

1

the unit or the remote control. The disc tray will open.

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

C.C.

ANGLE

MARKER ZOOM

–

SLOW

+

MUTING

VOL

–

TV MENU

B.SEARCH F.SEARCHPLAY

DISPLAY

SLEEP TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

+

CH

INPUT

CH

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

PAUSE/STILLSTOPOPEN/CLOSE

Place a disc onto the tray.

2

Position it with the printed label side up, align it with the guides, and place it in its proper position.

Press OPEN/CLOSE or

3

PLAY. The disc tray closes automatically. On the TV-screen, “ ” changes to “ ” and then playback commences.

• A menu screen will appear on the TV screen, if the disc has a menu feature.

NOTES:

• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Paren- tal Error” will appear on the TV screen according to the type of loaded disc. If these appear, check your disc again (see pages 25 and 38).

• Some discs may take a minute or so to start playback.

• When you set a single-faced disc label downwards (ie. the wrong way up) and press PLAY or OPEN/CLOSE on the unit, “ ” will appear on the display for about 5 seconds and then “No Disc” or “Incor- rect Disc” will be displayed.

• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

Press / or / to make a selection.

4

Press SELECT.

5

• Title is selected and play commences.

Press STOP to end playback.

6

• The unit memorizes the stopped point, depending on the disc. “

” appears on the screen. Press PLAY to resume

playback (from the scene point).

• If you press STOP again or unload the disc (“ on the screen.), the unit will clear the stopped point.

To stop the playback, press STOP.

7

Then press OPEN/CLOSE. The disc tray opens. Remove the disc and then press POWER. The disc tray closes automatically and unit turns off.

” appears

27

Special playback

Note: There may be a slight delay between when you press the button and the function activating.

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

C.C.

ANGLE

MARKER ZOOM

–

SLOW

+

MUTING

VOL

–

TV MENU

B.SEARCH F.SEARCHPLAY

123

456

789

CH

INPUT

CH

POWER

DISPLAY

SLEEP

TIMER

AUDIO

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

+

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

Fast Forward Playback

Press F.SEARCH during normal playback.

Each press of F.SEARCH will increase the speed of the search

(x 2), (x 4), (x 8), (x 15).

(CD: (x 2), (x 4), (x 8), (x 20))

• To resume normal playback, press PLAY.

Review Playback

Press B.SEARCH during normal playback.

Each press of B.SEARCH will increase the speed of the search

(x 2), (x 4), (x 8), (x 15).

(CD:

(x 2), (x 4), (x 8), (x 20))

• To resume normal playback, press PLAY.

Still Playback

Press PAUSE/STILL during normal playback to pause playback.

To resume normal playback, press PLAY.

Frame Advance

Press PAUSE/STILL during still playback. One frame is advanced each time you press PAUSE/STILL.

To resume normal playback, press PLAY.

PAUSE/STILLSTOPOPEN/CLOSE

TV / DVD

NOTE:

The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent damage to your television screen. Projection televisions are very susceptible.

28

Slow-motion Playback

Press SLOW normal playback or still playback. Each press of SLOW will change the speed of the slow x1/2, x1/4, x1/6, x1/8.

• To resume normal playback, press PLAY.

• To resume the still playback, press PAUSE/STILL.

(–)

Reverse or SLOW

(+)

Forward during

Locating a chapter or track

Press NEXT( ) or PREV( ) during playback to locate a chapter that you want to watch. Each time you press the button, a chapter or track is skipped.

MP3 playback

This player can play back the MP3-data which has been recorded on CD-R or CDRW. To produce the MP3-data, you need a Windows-PC with CD-ROM drive and a MP3encoding Software (not supplied). The Apple-HFS-System can not be played.

MP3 CD Information

Limitations on MP3 CD playback

• MP3 CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters, “mp3”.

• The directory and file names of the MP3 CD must correspond to the ISO standardized files.

• This unit can read 200 files per disc. If one directory has more than 200 files, it reads up to 200 files, the remaining files will be omitted.

• MP3 CD’s cannot be used for playback for the purpose of recording.

• It may take more than one minute for this unit to read MP3 files depending on its structure.

• Music recorded by “Joliet Recording Specification” can be played back, the file name is displayed on the screen. Long file names will be condensed.

• The music files recorded by “Hierarchical File System” (HFS) cannot be played.

Notes on MP3 files

To play back MP3 CD in the recorded order,

1. Use MP3 software that records data

alphabetically or numerically .

2. Name each file including two-digit or three-

digit number (e.g. “01” “02” or “001” “002”).

3. Refrain from making too many sub-folders.

CAUTION:

• Some MP3 CDs can not be played back depending on the recording conditions.

• The CD-R/RW that has no music data or non-MP3 files can not be played back.

Press OPEN/CLOSE.

1

The disc tray will open. Place a disc onto the tray.

Press PLAY or OPEN/CLOSE.

2

The disc tray closes automatically .

Scanning...

On the TV-screen, “Scanning...” will appear. Scanning will take as much time as the number of file.

A MP3 menu screen will appear

3

on the TV screen. Press / or / or Number buttons (0-9) to select the desired track, then press ENTER. Track is selected and play commences.

T

-/18

/

01

Ð

Japan

02

Ð

Bay Bridge

03

Ð

CLOSE MY EYES

04

Ð

DIVE TOBLUE

05

Ð

Honey

06

Ð

BLUE EYES

07

Ð

Blurry Eyes

08

Ð

flower

09

Ð

Lies and Truth- winter fall

10

Ð

/Enter/0-9/PlayMode

0:00:00

• In case the folder includes more than 11 tracks, press or to display next track list.

Press STOP to end playback.

4

• The unit records the stopped point. “ ” appears on the screen. Press PLAY to resume playback (from the scene point).

• If you press STOP again or unload the disc, the unit will clear the stopped point.

Then press OPEN/CLOSE.

5

The disc tray opens. Remove the disc and press POWER. The disc tray closes automatically and the unit turns off.

NOTES:

•

During MP3-Playback, you can not use SEARCH, A-B Repeat functions.

•

You can use Repeat (Track or All), Random functions and Program playback for MP3 CD Playback (see page 31).

29

Zooming/Locating desired scene

Zooming

This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

ANGLE

MARKER ZOOM

MUTING

TV MENU

C.C.

–

SLOW

+

VOL

–

B.SEARCH F.SEARCHPLAY

POWER

DISPLAY

SLEEP TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

+

CH

INPUT

CH

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

PAUSE/STILLSTOPOPEN/CLOSE

Press TV/DVD to select

1

DVD mode. Press ZOOM during playback. The center part of the image will be zoomed in. Each press of ZOOM will change the ZOOM (x 2), (x 4).

Press / / / to view a different part of the frame.

2

You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction.

In the zoom mode press ZOOM repeatedly to return to a

3

1:1 view (

2 (x 3) and 3

Off).

1

Locating Desired Scene

Use the title, chapter and time recorded on the disc to locate the desired point to play back.

Press JUMP during play-

1

back.

Jump

_ _ / 19 1 / 8 0:00:00 / 2:02:31

TV / DVD

NOTES:

• You can select the Pause, Slow or Search playback in the zoom mode.

• Some discs may not respond to zoom feature.

30

/Enter/0 9/Cancel/Jump

Press or to select the “C (Chapter)”, “T (Title/

2

Track)” or “

Press Number buttons (0–9) to input the number.

3

• If you input a wrong number, press CANCEL.

• Refer to the package supplied with the disc to check the

numbers.

Press ENTER.

4

• Playback starts.

• When you change the title, playback starts from

Chapter 1 of the selected title.

• Some discs may not work in the above operation.

(Time)”.

Repeat, Random and Program playback/Repeat A-B

Press PLAY MODE during playback or stop mode. Each time you press PLAY MODE, playback mode changes as follows.

DVD

On screen display

→ Title: Repeats the current title.

↓

Chapter: Repeats the current chapter.

↓

Off: Resumes normal playback.

• During stop mode, PLAY MODE key is not effective.

SLEEP TIMER

DISPLAY

AUDIO

PLAY MODE

AUDIO

Operation

Audio CD/MP3 CD

On screen display

→ All: Repeats entire disc.

↓

Track: Repeats the current track.

↓

Random Play:

Plays the tracks in random order.

↓

*Program: Plays the tracks in program order.

↓

(Status display)

: Resumes normal playback.

Operation

TITLE

SUBTITLE

JUMP

C.C.

ANGLE

MARKER ZOOM

–

SLOW

+

MUTING

VOL

–

TV MENU

B.SEARCH F.SEARCHPLAY

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT /ENTER

+

CH

VOL

INPUT

+

CH

–

DVD SETUP

DVD MENUTV/DVDNEXTPREV

PAUSE/STILLSTOPOPEN/CLOSE

*Program menu

Use number buttons (0–9) to enter the track’s number you want to program, then press ENTER. The track number and total time are displayed. Repeat this step to enter additional tracks. When you have finished entering tracks, press PLAY to start Program playback. A playlist of your programmed tracks is displayed.

• During stop mode, you can not select “ Track”.

Program

1 5 8:29 2 8 8:54 3 3 7:31

__

4

Total 3 0:24:54

/Enter/0 9/Cancel/Play/PlayMode

5/8

T

Playlist 583

NOTES:

• If you enter a wrong number – press CANCEL.

• To cancel program play, press STOP 3 times.

• To clear the programs on the program menu – press CANCEL until all programs are cleared.

• The program is cancelled when you open the disc tray or turn off the power.

Program Playback

0:02:31 0:08:29

Repeat A-B

Repeat A-B playback allows you to repeat material between two selected points.

Press REPEAT A-B during playback.

1

The start point is selected.

Press REPEAT A-B again.

2

The end point is selected. Playback starts at the point that you selected. Playback stops at the end point, returns to Point A automatically, then starts again.

To resume normal playback press REPEAT A-B again. “ Off” appears on the screen.

NOTES:

• Some discs may not work with the repeat operation.

• In Repeat A-B mode, subtitles near point A or B may not appear.

• You may not be able to set Repeat A-B, depending on the scenes of the DVD.

• Repeat A-B does not work with MP3 CD and interactive DVDs.

A

AB

31

Marking desired scenes

The TV/DVD stores the points that you want to watch again. You can resume playback from that scene.

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

–

SLOW

VOL

–

C.C.

+

ANGLE

MARKER ZOOM

MUTING

TV MENU

123

456

789

+

CH

INPUT

CH

–

POWER

DISPLAY

SLEEP TIMER

AUDIO

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

Marking the Scenes

Press MARKER during

1

playback.

Select the blank Marker

2

using / , then press ENTER at the desired scene.

• Up to 3 scenes can be selected.

• Repeat this procedure to set the other 2 scenes.

Press MARKER to remove this display.

3

Returning to the Scenes

Press MARKER during

1

playback or stop mode.

Marker

C

T

1

C

T

2

C

T

3

/Enter/Cancel/Marker

C

T

1

C

T

2

C

T

3

/Enter/Cancel/Marker

C

T

1

1 2 3

/Enter/Cancel/Marker

3

C

T

1

4

C

T

1

6

08 50013

08 500 12 270 17 040

B.SEARCH F.SEARCHPLAY

PAUSE/STILLSTOPOPEN/CLOSE

TV / DVD

NOTES:

•

The marking is canceled when you open the disc tray or turn the power off.

•

Some subtitles recorded around the marker may fail to appear.

32

Press or to select

2

the Marker 1-3.

Press SELECT.

3

Playback starts from the marked scene.

Marker

To Cancel the Mark

Press MARKER.

1

Press or to select the Marker 1-3.

2

Press CANCEL.

3

C

T

1

1 2 3

/Enter/Cancel/Marker

3

C

T

1

4

C

T

1

6

08 500 12 270 17 040

TV CATV

PLAY MODE

AUDIO

TITLE

Changing soundtrack language/Subtitles

Changing soundtrack language

You can select the language when you play a multilingual

POWER

DISPLAY

SLEEP TIMER

AUDIO

123

disc.

Press AUDIO during play-

1

back.

The current soundtrack language will appear.

2/8 Fra Dolby Digital

SUBTITLE

JUMP

ANGLE

MARKER ZOOM

–

SLOW

MUTING

TV MENU

B.SEARCH F.SEARCHPLAY

456

789

VOL

–

C.C.

+

0

REPEATA-B RETURN

CANCEL

+

CH

VOL

INPUT

CH

–

RETURN

LIGHT

SELECT

/ENTER

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

PAUSE/STILLSTOPOPEN/CLOSE

NOTES:

• If the desired language is not heard after pressing the SUBTITLE button several times, the language is not recorded on the disc.

• Changing soundtrack language is cancelled when you open the disc tray. The initial default language or available language will be heard if the disc is played back again.

• Changing subtitle language is cancelled when you open the disc tray.

• Some functions may not work on some DVDs. You may not be able to turn subtitles on or off or change subtitles. While playing the DVD, the subtitle may change when:

- you open or close the disc tray

- you change the title.

• In some cases, the subtitle language is not changed to the selected one immediately.

Press AUDIO repeatedly

2

until the desired language is selected.

1/8 Eng Dolby Digital

The on-screen display will disappear after a few seconds.

Subtitles

Turning the Subtitles On and Off

When playing back a disc recorded with subtitles, you can turn the subtitles on or off.

Press SUBTITLE during playback until “Off” appears.

Changing the subtitle language

You can select the language when playing back a disc recorded with multi-lingual subtitles.

Press SUBTITLE repeat-

1

edly during playback until your desired language appears.

The on-screen display will disappear after a few seconds.

2

Off

1/32 Eng

33

Changing angles/Title selection/DVD menu

Changing angles

When playing back a disc recorded with multi-angle facility, you can change the view angle.

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

C.C.

ANGLE

MARKER ZOOM

–

SLOW

MUTING

VOL

–

TV MENU

POWER

DISPLAY

SLEEP

TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

+

CANCEL

LIGHT

SELECT

+

CH

INPUT

CH

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

Press ANGLE during play-

1

back.

The current angle will appear.

Press ANGLE repeatedly until the desired angle is selected.

2

1/9

Title selection

Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.

Press TITLE during playback.

1

Title menu appears on the screen.

Press / or / to select the desired title.

2

Press ENTER or PLAY.

3

The playback of the selected title will start.

B.SEARCH F.SEARCHPLAY

PAUSE/STILLSTOPOPEN/CLOSE

TV / DVD

NOTES:

• Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the DVD.

• Depending on the DVD, you may not be able to select the title. Depending on the DVD, a “title menu” may simply be called a “menu” or “title” in the instructions supplied with the disc.

34

DVD menu

Some DVDs allow you to select the disc contents using the menu. When you play back these DVDs, you can select the subtitle language and sound-track language,etc. using the DVD menu.

Press DVD MENU during playback.

1

The DVD menu appears on the screen.

• Press DVD MENU again to resume playback at the scene when you pressed DVD MENU.

Press

2

Press ENTER.

3

The menu continues to another screen. Repeat steps 2 and 3 to set additional items if any.

/ or / to select the desired item.

Setting language

You can change the default settings to customise performance to your preference.

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

ANGLE

MARKER ZOOM

MUTING

TV MENU

C.C.

–

SLOW

+

VOL

–

B.SEARCH F.SEARCHPLAY

123

456

789

CH

INPUT

CH

POWER

DISPLAY

SLEEP TIMER

AUDIO

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

+

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

PAUSE/STILLSTOPOPEN/CLOSE

Press TV/DVD to select

1

DVD mode. Press DVD SETUP in the stop mode or No Disc. Press or to select “Language”, then press or ENTER.

Press

2

“OSD Language”, then press

Press

3

sired language (e.g. Eng-

or to select

or ENTER.

or to select de-

lish), then press ENTER. The menu returns to “Lan-

Main Menu

Language

Picture Sound Parental

/Enter/Setup/Return

Language

OSD Language English

Menu English Audio English Subtitle English

/Enter/Setup/Return

OSD Language

English

Francais Espanol

guage” menu automatically.

• If you want to return to the

/Enter/Setup/Return

previous menu, press or RETURN.

Repeat steps 2-3 for other “Language” setting.

4

Other: (Menu/Audio/Subtitle)

If you want to select another language, enter the language code (see the Language code list on page 41).

Off: (subtitle)

Subtitles do not appear.

TV / DVD

NOTES:

• If the selected soundtrack language is not recorded on the disc, the original language will be heard.

• If the selected subtitle language is not recorded on the disc, the first-priority language is selected.

Press DVD SETUP to remove the Menu screen.

5

35

Setting the aspect ratio of TV screen/Setting on screen display

Setting the aspect ratio of TV screen

You can select the aspect ratio for your TV.

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

C.C.

ANGLE

MARKER ZOOM

–

SLOW

+

MUTING

VOL

–

TV MENU

B.SEARCH F.SEARCHPLAY

TV / DVD

POWER

DISPLAY

SLEEP TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

+

CH

INPUT

CH

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

PAUSE/STILLSTOPOPEN/CLOSE

Press TV/DVD to select

1

DVD mode. Press DVD SETUP in the stop mode or No Disc. Press or to select

“Picture”, then press or ENTER.

Press or to select

2

“TV Screen”, then press or ENTER.

Press

3

your desired screen type,

or to select

then press ENTER.

Main Menu

Language

Picture

Sound Parental

/Enter/Setup/Return

Picture

TV Screen

Display

TV Screen

16:9

4:3

4:3 On

You have the following screen sizes to choose from:

16:9

Wide screen

Select this mode when connecting to a wide-screen TV. A wide screen picture is displayed full size.

4:3 Letterbox

Select this mode when connecting to a conventional TV. When playing back a wide screen-DVD disc, it displays the wide picture with black bands at the top and bottom of screen.

4:3

Panscan

It displays the wide picture on the whole screen with left and right edges automatically cut off.

• If you want to return to the previous menu, press or

RETURN.

Press DVD SETUP to remove the Menu screen.

4

Status on screen display

On screen display can be switched on or off when you press the buttons.

Press DVD SETUP in the stop mode or No Disc.

1

Press or to select “Picture”, then press or ENTER.

NOTE:

If the DVD disc is not formatted in the pan & scan style, it displays 4:3 style.

36

Press

2

“Display”.

Press or ENTER to

3

select “On” or “Off”.

or to select

Picture

TV Screen

Display

Picture

TV Screen

Display

4:3 On

4:3 Off

On: On screen displays appear when you press the

buttons (factory setting).

Off: On screen displays do not appear when you press

any buttons.

• If you want to return to the previous menu, press

RETURN.

Press DVD SETUP to remove the Menu screen.

4

or

Dynamic Range Control

DRC (Dynamic Range Control) enables you to control the dynamic range so as to achieve a suitable sound for your equipment.

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

C.C.

ANGLE

MARKER ZOOM

–

SLOW

MUTING

VOL

–

123

456

789

+

CH

INPUT

POWER

DISPLAY

SLEEP TIMER

AUDIO

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

VOL

+

/ENTER

+

Press TV/DVD to select

1

DVD mode. Press DVD SETUP in the stop mode or No Disc. Press or to select

Main Menu

Language Picture

Sound

Parental

“Sound”.

/Enter/Setup/Return

Press or ENTER to se-

2

lect “DRC”.

Press or ENTER to se-

3

lect “On” or “Off”.

Sound

DRC On

/Enter/Setup/Return

Sound

DRC Off

/Enter/Setup/Return

• If you want to return to the previous menu, press or

RETURN.

CH

TV MENU

B.SEARCH F.SEARCHPLAY

–

DVD SETUP

DVD MENUTV/DVDNEXTPREV

PAUSE/STILLSTOPOPEN/CLOSE

TV / DVD

NOTES:

• This function works only during playback of Dolby Digital recorded discs.

• The level of Dynamic Range Reduction may differ depending on DVD video disc.

Press DVD SETUP to remove the Menu screen.

4

37

Parental control setting

Some discs are specified not suitable for children. Such discs can be prevented from play back with the unit.

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

C.C.

ANGLE

MARKER ZOOM

–

SLOW

+

MUTING

VOL

–

TV MENU

B.SEARCH F.SEARCHPLAY

123

456

789

+

CH

INPUT

CH

POWER

DISPLAY

SLEEP

TIMER

AUDIO

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

/ENTER

VOL

+

–

DVD SETUP

DVD MENUTV/DVDNEXTPREV

Press TV/DVD to select

1

DVD mode. Press DVD SETUP in the stop mode or No Disc. Press or to select “Parental”, then press or ENTER.

Press or to select

2

“Parental Level”, then press

or ENTER.

Press or to select a

3

level from Off or 1–8. Press

or ENTER to set the se-

lected level.

Main Menu

Language Picture Sound

Parental

/Enter/Setup/Return

Parental

Password Off

Parental Level 8

Parental Level

Off

1

2 3 4 5

/Enter/Setup/Return

• Level Off: The parental control setting does not func-

tion.

• Level 8: Almost all DVD software can be played back.

• Level 1: DVD software for adults cannot be played

back.

• Select from the level 1 to level 8. The limitation will be more severe as the level number is lower.

Press or to select

4

“Password”, then press or ENTER.

Parental

Password Off

Parental Level 1

PAUSE/STILLSTOPOPEN/CLOSE

TV / DVD

NOTES:

• If each setup (P.35–39) has been completed, the unit can always be operated under the same conditions (especially with DVD discs). Each setup will be retained in the memory when you turn the power off.

• Depending on the discs, the unit cannot limit playback.

• Some discs may not be encoded with specific rating level information though its disc jacket says “adult.” For those discs, the age restriction will not work.

38

Press number buttons (0–

5

9) for the password. Don’t forget the password.

Password

Password 1234

• If you input a wrong

number, press CANCEL.

Press ENTER to store the

6

password. Note: Now the rating is locked and the setting can-

Parental

Password On

Parental Level 1

not be changed unless you enter the correct password.

• If you want to return to the previous menu, press

or RETURN.

Press DVD SETUP to remove the parental control screen.

7

To change the parental level

Press TV/DVD to select DVD mode.

1

Press DVD SETUP in the stop mode or No Disc. Press ENTER.

or to select “Parental”, then press or

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

ANGLE

MARKER ZOOM

MUTING

TV MENU

C.C.

–

SLOW

+

VOL

–

B.SEARCH F.SEARCHPLAY

POWER

DISPLAY

SLEEP TIMER

AUDIO

123

456

789

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

+

CH

INPUT

CH

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

PAUSE/STILLSTOPOPEN/CLOSE

Press or to select

2

“Password”, then press or ENTER.

Press number buttons (0–

3

9) to enter the password you have stored.

• If you input a wrong number, press CANCEL.

Press ENTER.

4

The password is now Off.

Press or to select

5

“Parental Level”. Then press or ENTER. The Parental Level screen is displayed.

Press or to select a

6

level from Off or 1–8 and then press or ENTER.

Parental

Password On

Parental Level 1

Password

Password 1234

Parental

Password Off

Parental Level 1

Parental

Password Off

Parental Level 1

Parental Level

3 4 5 6 7

8

/Enter/Setup/Return

TV / DVD

NOTE:

Do not forget the password. If you forget the password, contact the dealer that you purchased the unit from.

Press or to select

7

“Password” and then press

or ENTER.

Press number buttons (0–

8

9) to enter a 4-digit password.

Note: You can enter a new password.

Press ENTER.

9

The parental level is now changed and locked.

• If you want to return to the previous menu, press or

RETURN.

Press DVD SETUP to remove the parental control screen.

10

Parental

Password Off

Parental Level 8

Password

Password 9876

Parental

Password On

Parental Level 8

39

Temporary disabling of rating level by DVD disc

Your disc exceeds the parental control level. Password

Enter/0–9/Cancel/Return

Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not.

TV CATV

PLAY MODE

AUDIO

TITLE

SUBTITLE

JUMP

– SLOW +

VOL

–

C.C.

ANGLE

MARKER ZOOM

MUTING

TV MENU

123 456 789

CH

INPUT

CH

POWER

DISPLAY

SLEEP TIMER

AUDIO

RETURN

0

REPEATA-B RETURN

CANCEL

LIGHT

SELECT

+

–

/ENTER

VOL

+

DVD SETUP

DVD MENUTV/DVDNEXTPREV

Load a DVD disc and press

1

PLAY (see page 27).

If the DVD disc has been designed to temporarily cancel

2

the Rating level, the screen which appears after inserting a DVD will change, depending on which disc is played. If you select “YES” with the ENTER key, “Your disc exceeds the parental control level.” screen will then appear.

If you wish to cancel the set rating level temporarily, enter

3

the 4-digit password. Then press ENTER. Alternatively, if the password has not been set, playback will commence. If you don’t know (or have forgotten) the password, select “STOP”. The setting screen will disappear. Press OPEN/CLOSE to remove the disc.

To quit entering, press RETURN.

B.SEARCH F.SEARCHPLAY

PAUSE/STILLSTOPOPEN/CLOSE

TV / DVD

NOTE:

The rating level will remain disabled until the disc is ejected. When the disc is ejected, the original rating level will be set again automatically.

40

Playback will commence if the entered password was cor-

4

rect.

Language code list

Enter the appropriate code number for the initial settings “Menu”, “Audio” and/or “Subtitle” (see page 35).

Language Name Code Language Name Code Language Name Code Language Name Code Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Afar 1111 Finnish 1619 Lithuanian 2230 Slovak 2921 Afrikaans 1116 French 1628 Macedonian 2321 Slovenian 2922 Albanian 2927 Frisian 1635 Malagasy 2317 Somali 2925 Amharic 1123 Galician 1722 Malay 2329 Spanish 1529 Arabic 1128 Georgian 2111 Malayalam 2322 Sundanese 2931 Armenian 1835 German 1415 Maltese 2330 Swahili 2933 Assamese 1129 Greek 1522 Maori 2319 Swedish 2932 Aymara 1135 Greenlandic 2122 Marathi 2328 Tagalog 3022 Azerbaijani 1136 Guarani 1724 Moldavian 2325 Tajik 3017 Bashkir 1211 Gujarati 1731 Mongolian 2324 Tamil 3011 Basque 1531 Hausa 1811 Nauru 2411 Tatar 3030 Bengali; Bangla 1224 Hebrew 1933 Nepali 2415 Telugu 3015 Bhutani 1436 Hindi 1819 Norwegian 2425 Thai 3018 Bihari 1218 Hungarian 1831 Oriya 2528 Tibetan 1225 Breton 1228 Icelandic 1929 Panjabi 2611 Tigrinya 3019 Bulgarian 1217 Indonesian 1924 Pashto, Pushto 2629 Tonga 3025 Burmese 2335 Interlingua 1911 Persian 1611 Turkish 3028 Byelorussian 1215 Irish 1711 Polish 2622 Turkmen 3021 Cambodian 2123 Italian 1930 Portuguese 2630 Twi 3033 Catalan 1311 Japanese 2011 Quechua 2731 Ukrainian 3121 Chinese 3618 Javanese 2033 Corsican 1325 Kannada 2124 Romanian 2825 Uzbek 3136 Croatian 1828 Kashmiri 2129 Russian 2831 Vietnamese 3219 Czech 1329 Kazakh 2121 Samoan 2923 Volapük 3225 Danish 1411 Kirghiz 2135 Sanskrit 2911 Welsh 1335 Dutch 2422 Korean 2125 Scots Gaelic 1714 Wolof 3325 English 1524 Kurdish 2131 Serbian 2928 Xhosa 3418 Esperanto 1525 Laothian 2225 Serbo-Croatian 2918 Yiddish 2019 Estonian 1530 Latin 2211 Shona 2924 Yoruba 3525

Rhaeto-Romance

2823 Urdu 3128

Faroese 1625 Latvian, Lettish 2232 Sindhi 2914 Zulu 3631

41

Connections to other equipments

The exact arrangement you use to interconnect various video and audio components to the TV/DVD is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems including Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, MPEG decoder or etc as shown below.

Rear of TV/DVD

VIDEO

(MONO)

AUDIO

R

LINE IN 1

Coaxial digital cable (not supplied)

To Coaxial Digital Audio Input

AV Amplifier with built-in digital surround decoder as listed above

*

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby

UHF/

VHF

DIGITAL

AUDIO OUT

COAXIAL

Front

Speaker

(Left)

Coaxial Digital

Audio Output

TV/DVD

Surround Speaker (Left)

Subwoofer

Center Speaker

Front Speaker (Right)

Surround Speaker (Right)

*

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

NOTE:

When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG to ON on the AV

•

Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged. When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.

•

Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.

•

42

Using the audio/video inputs

If you connect the TV/DVD to VCR, camcorder or TV game, you can select by pressing INPUT.

Press INPUT repeatedly to select the desired mode. “LINE1”, “LINE2” or TV channel will display on the screen for 4 seconds.

LINE 1

TV Channel LINE 1

(Back)

NOTE: In the DVD mode this key will not operate.

1. To connect the TV/DVD to a VCR

Press the INPUT to select the desired mode to use the TV as a monitor. Operate your VCR as usual.

VCR

To Audio/Video OUT

LINE 2 (Front)

Rear of TV/DVD

VIDEO

(MONO)

AUDIO

DIGITAL

R

AUDIO OUT

COAXIAL

LINE IN 1

UHF/

VHF

AUDIO IN (L)

AUDIO IN (R)

VIDEO IN

2. To connect the TV/DVD to a camcorder

To playback from the camcorder, connect the camcorder to the TV/DVD as shown.

Camcorder

VIDEO IN

To Audio/Video OUT

Audio/Video cord (not supplied)

Front of TV/DVD

VIDEO L/MONO AUDIO R

LINE 2 IN

3. To connect the TV/DVD to a TV Game

Front of TV/DVD

VIDEO IN

VIDEO L/MONO AUDIO R

LINE 2 IN

To Audio/Video OUT

Audio/Video cord (not supplied)

AUDIO IN (R)

AUDIO IN (L)

AUDIO IN (R)

AUDIO IN (L)

43

Problems and troubleshooting

Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units.

SYMPTOMS POSSIBLE SOLUTIONS

POWER

TV/DVD does not operate.

TV BROADCAST RECEPTION

Poor sound or No sound

Poor picture or No picture

Poor reception on some channels

Poor color or no color

Picture wobbles or drifts

No CATV reception

Horizontal or diagonal bars on screen

No reception above channel 13

TV shuts off

Closed - Caption is not activated.

Display is not shown in your language.

•Make sure the power cord is plugged in.

•Try another AC outlet.

•Power is off, check fuse or circuit breaker.

•Unplug unit, then plug it back in.

•Station or CATV experiencing problems, tune to another station.

•Check Volume adjustments (Volume and Muting).

•Check for sources of possible interference.

•Station or CATV experiencing problems, tune to another station.

•Check antenna or CATV connections, reorient antenna.

•Check for sources of possible interference.

•Check picture control adjustments.

•Station or CATV experiencing problems, tune to another station.

•

Station signal is weak, reorient antenna to receive weaker station.

• Check for sources of possible interference.

•Station or CATV experiencing problems, tune to another station.

•Make sure channels are set into memory.

•Check picture control adjustments.

•Check antenna or CATV connections, reorient antenna.

•Check for sources of possible interference.

•Station or CATV experiencing problems, tune to another station.

•Make sure channels are set into memory.

•CATV company is scrambling signal.

•Check antenna orientation.

•Check all CATV connections.

•Set TV/CATV menu option to the CATV mode.

•Station or CATV system problems, try another station.

•Check antenna connections, reorient antenna.

•Check for sources of possible interference.

•Make sure TV/CATV menu option is in the appropriate mode.

•If using antenna, check UHF antenna connections.

•No broadcast on station tuned.

•Sleep Timer is set.

•Power interrupted.

•TV station experiencing problems or program tuned is not closed

captioned. Try another channel.

•Check CATV connection or VHF/UHF antenna, reposition or rotate antenna.

•Press C.C. button to turn on the closed caption decoder.

•Select proper language in the menu options.

PAGE

5

10

–

5

14 14 46

14

11,12

46 22

14

11,12

46 14

18 22

11,12

46 14

18

–

11 12

17 14

11,12

46 17

11 18

15

–

18

11,12

16

13

44

SYMPTOMS POSSIBLE SOLUTIONS

DVD

Playback doesn’t start.

No picture • TV/DVD selector is not set correctly. No sound • Check the input selector of the amplifier is set properly.

Picture is distorted during CUE or REVIEW.

Stopping playback, search, slowmotion play, repeat play, or program play, etc. cannot be performed.

• No disc is inserted.

• The disc may be dirty. Clean up the disc.

• The unit cannot play CD-ROMs, etc.

• The unit is in the Special playback mode.

• Select the correct Audio Output position on AV amplifier.

• The picture will be distorted occasionally.

• Some discs may not do some of the functions.

PAGE

27 25

–

26

–

28 42

–

No 4:3 (16:9) picture • The setup does not match your TV. No on-screen display • Select Display On. No surround sound • The setup does not match your stereo system.

The unit or remote operation key is not functioning.

Playback does not start when the title is selected.

Audio soundtrack and/or subtitle language is not changed when you play back a DVD.

No subtitle • Some discs have no subtitles.

Angle cannot be changed. • Multi-angles are not recorded on the DVD disc.

“ ” appears on the screen.

REMOTE CONTROL

The remote control does not function.

• Turn off the unit and unplug the AC power cord for several minutes, then replug it.

• Check the RATING LEVEL setup.

• Multilingual language is not recorded on the DVD disc.

• Subtitles are cleared. Press SUBTITLE.

• The function is prohibited with the unit or the disc.

• Aim at the remote control at the remote sensor.

• Operate within Approx. 5 Meters or reduce the light in the room.

• Clear the path of the beam.

• The batteries are weak. Replace the batteries.

• Check the batteries are inserted correctly.

36 36 42

–

38~40

35

33

34

–

10

45

Reception disturbances

Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.

IGNITION

Black spots or horizontal streaks may appear, the picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.

GHOSTS

Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected by tall buildings, hills or other large objects. Changing the direction or position of the antenna may improve the reception.

SNOW

If the TV/VCR is located far from the TV station, in a fringe reception area where the signal is weak, small dots may appear in the picture. If the signal is extremely weak, the installation of a larger external antenna may be necessary.

RADIO FREQUENCY INTERFERENCE (RFI)

Caused by two-way radios, this type of interference produces moving ripples or diagonal streaks in the picture. Some cases may cause a loss of contrast in the picture. Changing the direction and position of the antenna or installing an RFI filter may improve the picture.

PICTURE SIZE VARIATION

A slight picture size variation is normal when you adjust the CONTRAST or BRIGHTNESS settings.

CARE AND MAINTENANCE

To prevent fire or shock hazard, disconnect the TV/DVD from the power source before cleaning. The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture. Use caution when cleaning or wiping the plastic parts.

46

GENERAL

Power supply: Power consumption:

Weight: Dimensions:

TELEVISION

Picture tube: Tuner type: Receiving channels:

Antenna input: Speaker: Audio output power:

Specifications

AC 120V 60Hz Operation: 115W Stand by: 4W

56.1lbs (25.5 kg) Width : 22-5/8 inches (574 mm) Height: 20-3/8 inches (515 mm) Depth : 19-1/8 inches (483 mm)

Type 20 (508 mm diagonal) Quartz PLL Frequency Synthesized VHF 2-13 UHF 14-69 CATV 14-36 (A)-(W)

37-59 (AA)-(WW) 60-85 (AAA)-(ZZZ) 86-94 (86)-(94) 95-99 (A-5)-(A-1) 100-125 (100)-(125)

01 (5A) VHF/UHF In 75 ohm coaxial 1-13/16 x 3-7/8 inches (46 x 99 mm), 8 ohm x 2

2.5W + 2.5W

DVD/CD player

Signal system: Applicable disc:

Frequency response:

Input:

Headphone Jack: Digital audio out: Pickup:

ACCESSORIES:

NTSC

1. DVD (12cm, 8cm)

2. CD (12cm, 8cm) DVD: 4Hz - 22KHz CD: 4Hz - 20KHz Video : (RCA) 1 Vp-p/75ohm Audio : (RCA) –8 dB/50Kohm

3.5mm Stereo mini-jack

0.5Vp-p 75ohms terminated CD : Wavelength: 775 - 815 nm

Maximum output power: 0.5 mW

DVD : Wavelength: 650 - 666 nm

Maximum output power: 2.0 mW

Remote control x 1 Batteries (2 x AA)

47

Appendix (Remote programming)

REMOTE PROGRAMMING

Setting the CATV Codes

You can program your remote to operate your cable box, satellite receiver by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer.

Cable Box or Satellite setup

The remote control is programmed with CATV and/or Satellite codes for power on, power off, channel up, channel down, and 10 key operation.

1) Find the CATV/Satellite brand from the list of codes shown below.

2) Slide the 2-way selector switch to “CATV ”.

3) Press and hold down the DISPLAY button.

4) With the DISPLAY button held down, enter the first code number listed using the 10 key pad.

5) Release the DISPLAY button.

6) Confirm the operation of the Cable Box/Satellite receiver.

• If your CATV or Satellite box does not respond to the first code, try the others listed. If it does not respond to any code, try the Search Codes Function as shown below.

Cable Box CODES Cable Box CODES

ABC Archer Cableview Citizen Curtis Diamond Eagle Eastern GC Brand Gemini

General Instrument

Hamlin Hitachi Jerrold Macom Magnavox Memorex Movietime Oak Panasonic Paragon Philips Pioneer

Digital Satellite Systems

Echostar Express VU G.E. G.I. Gradiente Hitachi HNS (Hughes) Panasonic

032, 025 051, 032 022, 051 058, 059 024, 032, 025 029 034 032, 051 022, 043 065, 024, 025, 026, 027, 020, 021, 022, 057, 023 040, 041, 042, 045, 058, 064 049, 024 065, 024, 025, 026, 027, 020,021, 022, 057, 023 049, 050, 051, 054 033

030

032, 051 039, 037, 048 055, 056, 060, 071 063 028, 029, 030, 052, 053, 031, 069 047, 062

CODES

100, 113, 114 100, 113 106 108 112 104, 111 104 105

Pulsar024 Puser RCA Realistic Regal Regency Rembrandt Samsung Scientific Atlanta SLMark Sprucer Stargate Telecaption Teleview Texscan Tocom Toshiba Unika Universal Videoway Viewstar Zenith 063, 046 Zenith/Drake Satellite

Digital Satellite Systems

Philips Primestar Proscan RCA Sony Star Choice Toshiba Uniden

051, 032 032 061, 070 032 058, 064, 040, 041, 042, 045, 068 034 037, 032, 051, 038 051 057, 058, 059 051, 047 051, 056 032, 051 067 047, 051 044 035, 036, 066 050 032, 025 022, 032 052 029, 030

046

CODES

102, 103 108 106, 109, 110 106, 109, 110 107 104, 108 101 102, 103

Cable/Satellite Search Codes Function:

1) Slide the 2-Way Mode Selector switch to CATV.

2) Press the TV POWER and RETURN buttons. Hold for at least three seconds and release.

3) Press TV POWER, see if the CATV or Satellite box responds.

4)

If there was a response, press RETURN. The operating codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 a total of 52 times without a response, use the remote control which came with the equipment.

5) Press RETURN to exit.

48

Memo

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

49

JVC COMPANY OF AMERICA

Division of U.S. JVC CORP.

1700 Valley Road

Wayne, New Jersey 07470

JVC CANADA, INC.

21 Finchdene Square Scarborough, Ontario

Canada M1X 1A7

J5J00401A 03/05

K

Printed in Thailand

JVC AV-20FD24 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

TV/DVD COMBO USER'S GUIDE

IMPORTANT SAFEGUARDS

Sound control adjustment

Zooming/Locating desired scene