Precise weighing
technology for warehouses,
manufacturing and shipping
4 evenly positioned
weighing cells provide the
technology for accurate
weighing of materials
Wide variations for almost
every weighing application
Left and right-hand controls
AMW 22/22p
Hand pallet truck with weighing system (2,200 kg)
The AMW 22 and AMW 22p hand pallet
trucks are mobile weighing systems for
warehouses, manufacturing and shipping
applications. Wherever goods need to
be weighed and transported, their ability
to take the ‘scales to the goods’ makes
these trucks the perfect solution.
For example, the basic AMW 22 model is
appropriate for any area of application,
oering ecient and precise weighing
with its 4 weighing cell technology. A
1 kg incremental display and max. 0.1%
deviation from the measuring range is
the right solution for many applications.
The AMW 22p is even more professional. Its wide range of functions makes
this weighing pallet truck ideal for any
application. A comfortable multi-area
display, maximum precision (at least
99.9% of the weighed weight), a number
of options and the intelligent battery
exchange module combine to make the
AMW 22p a first-rate truck.
AMW 22/22p
AMW 22 AMW 22p
Technical data in line with VDI 2198
1.1 Manufacturer (short form) Jungheinrich
1.2 Model AMW 22 AMW 22p
1.3 Drive manual
1.4 Manual, pedestrian, stand-on, seated, order picker operation hand
1.5 Load capacity/rated load Q t 2.2
1.6 Load centre distance c mm 600
Identification
1.8 Load distance x mm 890
1.9 Wheelbase y mm 1110
2.1 Service weight kg 99 102
2.2 Axle load, w. load, front / rear kg 578 / 1721
2.3 Axle load, w.o. load, front / rear kg 61 / 38
Weights
3.1 Tyres C;V
3.2 Tyre size, at front mm Ø 170x50
3.3 Tyre size, at rear mm Ø 82x96
3.5 Wheels, number front/rear (× = driven wheels) 2/2 or 2/4
3.6 Track width, front b
3.7 Track width, rear b
Wheels / chassis
mm 109
10
mm 370
11
4.4 Lift h3 mm 122
4.9 Height of tiller in drive position min. / max. h
4.15 Lowered height h
4.19 Overall length l
4.20 Length incl. back of forks l
4.21 Total width b
mm 1234
14
mm 86
13
mm 1546
1
mm 396
2
mm 540
1/b2
4.22 Fork dimensions s/e/l mm 62 / 170 / 1150
4.25 Width over forks b
4.32 Floor clearance centre wheelbase m
Basic dimensions
mm 540
5
mm 24
2
4.33 Aisle width for pallets 1000 × 1200 sideways Ast mm 1763
4.34 Aisle width for pallets 800 × 1200 lengthways Ast mm 1813
4.35 Turning radius W
mm 1303
a
5.3 Lower speed, w. / w.o. load m/s 0.09 / 0.02
1)
2)
Issue: 11/2012
Perform-
ance data
6.4 Battery voltage/nominal capacity K5 V/Ah 4x 1,5 12 / 1.2
trics
Elec-
1)
AMW 22p
2)
Ø 82x62 mm tandem tyres
In accordance with VDI Guideline 2198 this specification sheet provides details of the standard truck only. Non-standard tyres, different masts, optional equipment, etc. may
result in different values.
Benefit from the advantages
AMW 22 – display/operation Efficient weighing with the AMW 22 AMW 22p – display/operation Maximum precision with the AMW
Easy to handle
The operating handle is equally suitable
for both left and right handed operators.
The special lowering valve allows for
loads up to 1000 kg to be lowered particularly sensitively. The standard fast lift
(to 120 kg) ensures that Euro pallets are
lifted o the floor with only three pump
strokes and the maximum lift height is
achieved in 5 pump strokes.
Maximum precision
The weighing cells are positioned at the
four end points of the forks and ensure
extremely precise weight recording up to
a slanting position of 2°.
Thoroughly robust
Maximum stability is achieved through
the well proven fork construction. Electronics and display are protected against
dust and water (protection class IP 65).
Application-specific configuration
Two dierent models of the pallet truck
with weighing device are available to
ensure an application-specific, costeective solution for every application.
• Fast lift.
• 1 kg display increments across the
entire measuring range up to 2200 kg.
• Maximum 0.1% deviation from measuring range.
• Protected against moisture and dust (IP
65 rating).
• Automatic zero adjustment, also via
keypad.
• Taring over the full weighing range.
• Addition memory and number of
weighing processes.
• Power supply from 4 x AA / 1.5 volt
batteries sucient for approx. 1700
weighing processes.
• Automatic shutdown if not used for 3
minutes.
Special equipment AMW 22:
• Tandem design.
Performance characteristics of the
AMW 22p:
• After confirming the weight, the LC
display is automatically adjusted to the
lower weight.
• Maximum 0.1% deviation from
measured weight.
• Automatic switch-o after 30 minutes
without activity.
• Automatic multi-range display:
Measuring interval Measuring range
0.2 kg up to 200 kg
0.5 kg up to 500 kg
1.0 kg up to 2200 kg
Special equipment for the AMW 22p:
• Special functions option
Unit counting by entering or establishing
base unit weight
Button for optional weight in kg or lbs
Backlit display
Date and time
Battery discharge indicator
Entry of 5-digit codes
• Calibrated designs grade III (EU registration no. T2782).
• Additional battery change module.
• Integrated printer.
• Special fork dimensions.
• Wheel brake and parking brake, foot
brake.
• Anti-static steering wheel.
• Sensitive multi-range display:
22p
• Protected against moisture and dust (IP
Performance characteristics of the
AMW 22:
• 2200 kg weighing capacity.
65 rating).
• Plug-in battery module with 12 V / 1.2
Ah incl. Charger.
• 60 h operating time.
Measuring interval Measuring range
0.1 kg up to 200 kg
0.2 kg up to 500 kg
0.5 kg up to 2200 kg
Jungheinrich UK Ltd.
Head Oce:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone 01908 363100
Fax 01908 363180
info@jungheinrich.co.uk
www.jungheinrich.co.uk
The German production
facilities in Norderstedt and
Moosburg are certified.
Jungheinrich fork lift
trucks meet European
safety requirements.
T_AMW 22/22p_042014_en_UK_000
Loading...