JUMO 707060 User Manual

JUMO GmbH & Co. KG

Delivery address:Mackenrodtstraße 14,

36039 Fulda, Germany

Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

8 Technology Boulevard
Canastota, NY 13032, USA
Phone: [phone]

1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us

JUMO Wtrans B

Transmission unit

Transmission
frequency

868.4 MHz

Head transmitter

Power supply

Lithium battery

3.6 V, 2.2 Ah

Interface

Setup

Analog input

+

-

RTD
temperature probe

Thermocouple

Resistance /
Potentiometer

Voltage

Resistance transmitter

Programmable Head Transmitter
with Radio Transmission

Brief description

The Wtrans B head transmitter with wireless data transmission is used in connection with a
Wtrans receiver unit for stationary or mobile temperature measuring with RTD temperature
probes or thermocouples. Alternatively, resistors with an ohmic-value of up to 10 kΩ, voltages up
to 50 mV, and currents up to 20 mA that use an external shunt are measurable. Customer-spe­cific linearizations are possible.

The measured values are transmitted wirelessly to the receiver of the Wtrans measuring system.
These values are shown on the receiver's LCD display and are digitally available on the RS485­interface or as analog output(s). Optionally, different alarm types can be indicated with the two
relay outputs.

This head transmitter is designed for industrial applications – it is made up of the transmitter with
an integrated transmission unit and an antenna-battery case. The transmitter is designed to be
installed into type B terminal heads and works in an ambient temperature range from -30 to
85 °C. It is possible to install the transmitter into customer-specific terminal heads. The antenna­battery case is connected to the terminal head through a screw connection (M20 × 1.5).

The transmission frequency of the Wtrans measuring system is 868.4 MHz. This frequency is un­affected for the most part by external interferences and it allows for transmissions even in a rough
industrial environment. When using the antenna wall-holder with the 3 m antenna line for the re­ceiver then the maximum open-air range is 300 m.

A 3.6 V, 2.2 Ah (size AA) lithium battery is used as a power supply for the transmitter. For the
easy configuration and parameterization of the head transmitter and the Wtrans receiver on a PC
an optional setup program is available. Additionally, measured values can be recorded on the PC
with the online-chart function.

Data Sheet 707060

Seite 1/10

Block diagram

2011-09-30/00532898

Special features

• Transmission frequency: 868.4 MHz

• Measuring input for RTD temperature
probe, thermocouple, potentiometer and
voltage

• Configurable probe ID

• Battery status monitoring

• Easy battery change

• Configurable via setup program

• Customer-specific linearization (value pairs
in tables or fourth order number), can be
configured on the receiver

• Online chart of the measured values via set­up program and receiver

Type 707060/...

JUMO GmbH & Co. KG

Delivery address:Mackenrodtstraße 14,

36039 Fulda, Germany

Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

8 Technology Boulevard
Canastota, NY 13032, USA
Phone: [phone]

1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us

JUMO Wtrans

Data Sheet 707060 Seite 2/10

The JUMO Wtrans device series also includes the receivers 902931/... and the probes 902930/... in addition to the head transmitter 707060/....

JUMO Wtrans - receiver/probe

Data sheet

JUMO Wtrans receiver
Type T01.EC1
Type T01.EC3

JUMO Wtrans probe
Type T01.G1
Type T02.G1

JUMO Wtrans probe
Type T01.G1
Type T02.G1

JUMO Wtrans probe
Type T01.G2
Type T02.G2

Receiver (voltage supply AC 110 to 240 V or AC/DC 20 to 30 V)
4x analog outputs
2x analog outputs and 2x relay outputs

Insertion RTD temperature probe
Ambient temperature, handle: -30 to +85 °C
Ambient temperature, handle: -25 to +125 °C

Mineral insulated RTD temperature probe with flexible sheath
Ambient temperature, handle: -30 to +85 °C
Ambient temperature, handle: -25 to +125 °C

With M12 connector for RTD temperature probe
Ambient temperature, handle: -30 to +85 °C
Ambient temperature, handle: -25 to +125 °C

JUMO Wtrans B Programmable head transmitter with radio transmission 707060

902931

902930

902930

902930

2011-09-30/00532898

Data Sheet 707060 Seite 3/10

JUMO GmbH & Co. KG

Delivery address:Mackenrodtstraße 14,

36039 Fulda, Germany

Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

8 Technology Boulevard
Canastota, NY 13032, USA
Phone: [phone]

1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us

Technical data

Analog input

RTD temperature probe

Designation Standard Measuring range Measuring accuracy

Pt100 DIN EN 60751 -100 to +200 °C ± 0.1 K

(TK value = 3.85 × 10

Pt500 DIN EN 60751 -100 to +200 °C ± 0.1 K

(TK value = 3.85 × 10

Pt1000 DIN EN 60751 -100 to +200 °C ± 0.1 K

(TK value = 3.85 × 10
Ni 100 DIN 43760 -60 to +250 °C ± 0.2 K

(TK value = 6.18 × 10
Ni 500 DIN 43760 -60 to +150 °C ± 0.2 K

(TK value = 6.18 × 10
Ni 1000 DIN 43760 -60 to +150 °C ± 0.2 K

(TK value = 6.18 × 10

Pt100 JIS 1604 -100 to +200 °C ± 0.1 K

(TK value = 3.917 × 10
Pt50 ST RGW 1057 1985 -200 to +600 °C ± 0.2 K

(TK value = 3.91 × 10

Pt100 GOST 6651-94 A.1 -100 to +200 °C ± 0.1 K

(TK value = 3.91 × 10
Cu50 GOST 6651-94 A.4 -50 to +200 °C ± 0.2 K

(TK value = 4.26 × 10
Cu100 GOST 6651-94 A.4 -50 to +200 °C ± 0.2 K

(TK value = 4.26 × 10

Connection type 2-wire or 3-wire circuit

Sensor current < 0.5 mA
Lead compensation Not required for 3-wire circuit (max. admissible 11 Ω per line).

-3

1/K) -200 to +600 °C ± 0.2 K

-3

1/K) -200 to +600 °C ± 0.2 K

-3

1/K) -200 to +600 °C ± 0.2 K

-3

1/K)

-3

1/K)

-3

1/K)

-3

1/K) -200 to +600 °C ± 0.2 K

-3

1/K)

-3

1/K) -200 to +600 °C ± 0.2 K

-3

1/K)

-3

1/K)

Max. configurable lead wire resistance for 2-wire circuit: 22 Ω.

Thermocouples

Designation Standard Measuring range Measuring accuracy

Fe-CuNi „L“ DIN 43710 -200 to +900 °C ± 0.1 %

Fe-CuNi „J“ DIN EN 60584 -210 to +1200 °C ± 0.1 % as of -100 °C

Cu-CuNi „U“ DIN 43710 -200 to +600 °C ± 0.1 % as of -100 °C

Cu-CuNi T DIN EN 60584 -270 to +400 °C ± 0.1 % as of -150 °C

NiCr-Ni K DIN EN 60584 -270 to +1372 °C ± 0.1 % as of -80 °C

NiCr-CuNi „E“ DIN EN 60584 -270 to +1000 °C ± 0.1 % as of -80 °C

NiCrSi-NiSi „N“ DIN EN 60584 -270 to +1300 °C ± 0.1 % as of -80 °C

Pt10Rh-Pt „S“ DIN EN 60584 -50 to +1768 °C ± 0.15 % as of 20 °C

Pt13Rh-Pt „R“ DIN EN 60584 -50 to +1768 °C ± 0.15 % as of 50 °C

Pt30Rh-Pt6Rh „B“ DIN EN 60584 0 to 1820 °C ± 0.15 % as of 400 °C

W5Re-W26Re „C“ 0 to 2320 °C ± 0.15 %

W3Re-W25Re „D“ 0 to 2495 °C ± 0.25 %

W3Re-W26Re 0 to 2400 °C ± 0.15 %

Chromel-Copel -200 to +800 °C ± 0.1 % as of -80 °C

Chromel-Alumel -200 to +1372 °C ± 0.1 % as of -80 °C

PLII (Platinel II) 0 to 1395 °C ± 0.15 %

2011-09-30/00532898

a

Data Sheet 707060 Seite 4/10

JUMO GmbH & Co. KG

Delivery address:Mackenrodtstraße 14,

36039 Fulda, Germany

Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

8 Technology Boulevard
Canastota, NY 13032, USA
Phone: [phone]

1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us

Designation Standard Measuring range Measuring accuracy

MoRe5-MoRe41 0 to 2000 °C ± 0.2 %

Cold junction Pt1000 internal
Cold junction accuracy ± 1 K

a

All accuracies given in % refer to the maximum measuring range

Resistance / potentiometer

Designation Measuring range Measuring accuracy

Resistance / potentiometer
Linearization: 0 to 100 %

Resistance / potentiometer

> 50 Ω to ≤ 400 Ω
> 400 Ω to ≤ 4000 Ω
> 4000 Ω to ≤ 10000 Ω

>50Ω to ≤ 10000 Ω±0.1 %

± 400 mΩ
± 4 Ω
± 10 Ω

Linearization: Resistance in Ω

Connection type 2-wire or 3-wire circuit
Lead compensation Not required for 3-wire circuit (max. admissible 11 Ω per line).

Max. configurable lead wire resistance for 2-wire circuit: 22 Ω.

a

All accuracies given in % refer to the maximum measuring range

Resistance transmitter

Designation Measuring range Measuring accuracy

Resistance transmitter > 50 Ω to ≤ 400 Ω

> 400 Ω to ≤ 4000 Ω
> 4000 Ω to ≤ 10000 Ω

Connection type 3-wire connection

Requirement R

a

All accuracies given in % refer to the maximum measuring range

e+Ra+Rs

≤ 10000 Ω and Re+Ra≤ 1/3 R

± 400 mΩ
± 4 Ω
± 10 Ω

a

a

a

s

Volta g e

Designation Measuring range Measuring accuracy

Voltage 0to50mV ± 0.1 %

a

All accuracies given in % refer to the maximum measuring range

Measuring circuit monitoring

Measuring probe Detection of

overrange / underrange

Thermocouple Yes / Yes No Yes

RTD temperature probe Yes / Yes Yes Yes

Resistance / potentiometer Yes / Yes Yes Yes

Resistance transmitter No / No No No

Voltage Yes / Yes No Yes

Detection of

probe /

cable short circuit

Detection of

probe /

cable break

a

2011-09-30/00532898

Data Sheet 707060 Seite 5/10

JUMO GmbH & Co. KG

Delivery address:Mackenrodtstraße 14,

36039 Fulda, Germany

Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

8 Technology Boulevard
Canastota, NY 13032, USA
Phone: [phone]

1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us

Output (radio transmission)

Probe ID Max. 5-digit ID, factory-set, can be configured to customer-request

Transmission interval Adjustable from 1 to 3600 s (factory setting: 15 s)

Transmission frequency 868.4 MHz (Europe)

Transmission power +10 dBm

Open air range Max. 300 m when using the antenna wall-holder of the receiver and the 3 m antenna

line. When installing the antenna directly on the receiver, a reduced range of approx.
40 % must be taken into account.

Output signal

Thermocouple Voltage (mV)
RTD temperature probe Resistance (Ω)
Resistance / potentiometer Percent (%) or resistance (Ω)

Resistance transmitter Percent (%)

Voltage Voltage (mV)

Configuration With setup program

Configurable parameters Probe ID (max. 5-digit ID) and transmission interval

Electrical data

Voltage supply

Lithium battery Rated voltage: 3.6 V, rated capacity: 2.2 Ah; size AA

Operating life Approx. 1 year with the factory-set values (transmission interval = 15 s) and at room

temperature (brief transmission interval and high or low ambient temperature reduce
the battery operating life)

Battery change Only use the lithium battery available as an accessory

Environmental influences

Transmitter in the B head with antenna-battery case

Ambient temperature range -30 to +85 °C
Storage temperature range / storage humidity -40 to +85 °C / relative humidity ≤ 95 %

Temperature influence

Thermocouple ≤ ± 0.005 % / K deviation from 22 °C plus accuracy of the cold junction
RTD temperature probe ≤ ± 0.005 % / K deviation from 22 °C
Resistance / potentiometer ≤ ± 0.01 % / K deviation from 22 °C
Resistance transmitter ≤ ± 0.01 % / K deviation from 22 °C
Voltage ≤ ± 0.005 % / K deviation from 22 °C

Climate class 10 cycles at 10 °C / 80 °C, according to IEC 68-2-30,

Vibration resistance According to GL characteristic line 2

Admissible mechanical shock resistance 10 g / 6 ms, according to DIN IEC 68-2.29

Electromagnetic compatibility (EMC) According to DIN EN 61326-1

Interference emission Class B

Interference immunity Industrial requirements

Radio frequency spectrum ETSI EN 300 220-1 (V 2.3.1) and ETSI EN 300 220-2 (V 2.3.1)

a

All accuracy values in % refer to the maximum measuring range.

a

relative humidity 95 %, during operation

2011-09-30/00532898

Data Sheet 707060 Seite 6/10

JUMO GmbH & Co. KG

Delivery address:Mackenrodtstraße 14,

36039 Fulda, Germany

Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

8 Technology Boulevard
Canastota, NY 13032, USA
Phone: [phone]

1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us

Casing

Transmitter

Type Plastic case to be installed in connection head, form B

Material Polycarbonate

Flammability class UL 94 V2

Dimensions

Diameter 44 mm

Height with/without connectors 31 mm / 27 mm

Protection type IP00: For open installation

IP65: When installed in a suitable head, form B

Connections

Sensor 3-pole connection terminal RM 5 mm, conductor cross-section 1.5 mm²

Antenna SMB connector

Voltage supply 2-pin header RM 2.54 mm

Setup 4-pin connector

Weight Approx. 35 g

Antenna-battery case

Type Plastic case with M20x1.5 thread for connection head, form B

Material Polyetherimide

Flammability class UL 94 HB or UL 94 V-0

Dimensions

Diameter 30 mm

Height 115 mm

Protection type IP65, according to DIN EN 60529

Connection

Antenna SMB cable socket, 50 Ω

Battery connection 2-pole connector RM 2.54 mm

Mounting orientation Preferably vertical (optimum alignment is to the receiver antenna)

Weight (including battery) Approx. 80 g

2011-09-30/00532898

JUMO GmbH & Co. KG

Delivery address:Mackenrodtstraße 14,

36039 Fulda, Germany

Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

8 Technology Boulevard
Canastota, NY 13032, USA
Phone: [phone]

1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us

Connection elements and connectors

(1)

(6)

(6)
(2)

(5)

(4)

(7)

(8)

(3)

(9)

(10)

(11

+-

Data Sheet 707060 Seite 7/10

(1)SMB antenna connector (antenna connection) (7)Voltage supply socket (battery connection)

(2)Voltage supply connector (battery connection) (8)SMB antenna socket (antenna connection)

(3)Cable guide for antenna cable and voltage supply (9)Seal

(4)Probe connection (10)Lock nut

(5)Setup connector (11)Battery lid screw

(6)Mounting holes for installation in the terminal head, form B

Connection diagram

The connection diagram included in the data sheet provides initial information about the connection options. Only use the installation instructions
or the operating manual for the electrical connection. The know-how and the correct technical implementation of the safety warnings/instructions
contained in these documents are the prerequisite for the installation, electrical connection, and initial start as well as for the safety during opera­tion.

Voltage supply

Connection Connector Terminals Symbol and terminal designation

Lithium battery, DC 3.6 V 2

2011-09-30/00532898

Data Sheet 707060 Seite 8/10

JUMO GmbH & Co. KG

Delivery address:Mackenrodtstraße 14,

36039 Fulda, Germany

Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

8 Technology Boulevard
Canastota, NY 13032, USA
Phone: [phone]

1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us

1

3

J

1

3

J

2

3

2

+

-

1

3

J

1

3

2

1

3

2

E

S

A

3

2

+

-

3

2

Shunt

+

-

Analog input

Connection Connector Terminals Symbol and terminal designation

RTD temperature probe
2-wire circuit

4 1 and 3

RTD temperature probe

4 1 to 3

3-wire circuit

Thermocouple 4 2 and 3

Resistance / potentiometer

4 1 and 3

2-wire circuit

Resistance / potentiometer

4 1 to 3

3-wire circuit

Resistance transmitter

4 1 to 3
A=Start
S = Slider
E=End

Voltage (0 to 50 mV) 4 2 and 3

Current (0 to 20 mA) 4 2 and 3

Measuring range: Voltage (0 to 50 mV)
with shunt 2.5 Ω (see accessories)

Output

Connection Connector Terminals Symbol and terminal designation

Antenna connector 1

2011-09-30/00532898

Data Sheet 707060 Seite 9/10

JUMO GmbH & Co. KG

Delivery address:Mackenrodtstraße 14,

36039 Fulda, Germany

Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

8 Technology Boulevard
Canastota, NY 13032, USA
Phone: [phone]

1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us

27

33

Ø44

approx. 105

approx. 125

17

49.5

Ø30

115

Interface

Connection Connector Terminals Symbol and terminal designation

Setup 5

Dimensions

Transmitter

Antenna-battery case

2011-09-30/00532898

Data Sheet 707060 Seite 10/10

JUMO GmbH & Co. KG

Delivery address:Mackenrodtstraße 14,

36039 Fulda, Germany

Postal address:

36035 Fulda, Germany
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

8 Technology Boulevard
Canastota, NY 13032, USA
Phone: [phone]

1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us

Order details

(1) Basic type

707060

JUMO Wtrans B
programmable head transmitter with radio transmission

(2) Input

8 Standard, with factory settings

9 Customized programming according to specification

a

(3) Output (probe)

10 Transmission frequency 868.4 MHz (Europe)

(4) Extra codes

000 None

a

Please specify the probe ID, transmission interval, measuring range, and, if required, the probe type in plain text.

(1) (2) (3) (4)

Order code /-/

Order example 707060 / 8 - 10 / 000

Delivery package

1 transmitter in the ordered version (without terminal head form B) inc. mounting parts (2 screws and 2 compression springs)

1 antenna-battery case with reverse battery protection connection cables

1 lithium battery 3.6 V, 2.2 Ah (size AA) already inserted in the antenna-battery case ready for use

1 operating manual B707060.0

Accessories

Article Part no.:

Lithium battery 3.6 V, 2.2 Ah (size AA) 70/00547559
PC interface with USB/TTL converter, adapter (socket connector), and adapter (pins) 70/00456352
PC interface with TTL/RS232 converter and adapter (socket connector) 70/00350260

Setup program on CD-ROM, multilingual 70/00488887
Setup program including OnlineChart on CD-ROM, multilingual 70/00549067
Activation for OnlineChart 70/00549188
Precision-resistor type 2.5 R / 0.1 % (shunt) 70/00555645

2011-09-30/00532898