John Deere 320D, 318D UPTIME MAINTENANCE PLANNER
Every 1000 Hours
As Required
Initial Service - 250 Hours
318D and 320D
• Inspect and clean cooling package
• Check tire pressure
• Check wheel lug nut torque
• Add coolant extender as indicated by COOL-GARD™ II test strips
• Check and clean cab fresh air filter—if equipped
• Check and clean cab recirculation air filter—if equipped
• Inspect and clean fuel tank vent tube
Every 10 Hours or Daily
• Check engine oil level
• Check hydraulic reservoir oil level
• Check coolant level
• Check and drain water separator fuel filter
• Check and drain auxiliary fuel filter and water separator—if equipped
Every 50 Hours
• Lubricate boom linkage, cylinder pivot points, and Quik-Tatch™ linkage
• Change engine oil and replace filter
Every 250 Hours
• Take engine oil sample
Every 500 Hours
• Change engine oil and replace filter
• Replace water separator fuel filter
• Replace auxiliary fuel filter and water separator—if equipped
• Replace in-line fuel filter
• Replace primary engine air filter
• Replace hydraulic oil reservoir breather
• Replace hydraulic oil filter
• Check chain case oil level
• Lubricate steering linkage—if equipped
• Drain fuel tank sump
• Take hydraulic oil sample
• Take diesel fuel sample
• Take engine coolant sample
UPTIME MAINTENANCE PLANNER
1
• Check coolant
• Replace secondary engine air filter
• Drain, flush, and refill cooling system
• Change hydraulic reservoir oil
• Change chain case oil
Every 6000 Hours
T252916 28OCT10
T252996-28 | T253003-63 | T253004-59
UPTIME MAINTENANCE PLANNER
Fluid Analysis Kits
3
2
1
REQUIRED PARTS
Description
Part Number
Initial Service -
250 Hours
1
Engine Oil Filter RE519626 1
In-Line Fuel Filter T257865 1 1 1
Water Separator Fuel Filter RE533026 1 1 1
Auxiliary Fuel Filter and Water
AT365870 1 1 1
Separator—If Equipped
Hydraulic Oil Reservoir Breather AT101565 1 1 1
Hydraulic Oil Filter AT314164 1 1 1
Primary Engine Air Filter
Secondary Engine Air Filter RE282287 1 1
PLUS-50™ II Engine Oil
PLUS-50™ II Hydraulic &
Hydrostatic Oil
PLUS-50™ II Chain Case Oil
(per side)
RE282286 1 1 1
TY26669
TY26669
TY26669
2
2
2
9.0 L
(2.4 gal)
COOL-GARD™ II Pre-Mix TY26575 9.3 L
Coolant Extender TY26603
3
Diesel Engine Oil AT317904 1 1 1 1
Hydraulic & Hydrostatic Oil AT303189 1 1 1
Diesel Fuel AT180344 1 1 1
Engine Coolant AT183016 1 1 1
COOL-GARD™ II Test Strips TY26605 1 1
Perform initial service once after the first 250 hours of operation.
See operator's manual for recommended oil type and oil viscosities based on operating temperatures.
Based on fluid analysis results, intervals may need to be adjusted for operating conditions. Consult your local John Deere dealer.
Every
250 Hours
Every
500 Hours
Every
1000 Hours
1 1 1
9.0 L
(2.4 gal)
9.0 L
(2.4 gal)
19.0 L
(5.0 gal)
16.1 L
(4.25 gal)
As Required
Every
6000 Hours
9.0 L
(2.4 gal)
19.0 L
(5.0 gal)
16.1 L
(4.25 gal)
(2.5 gal)
T252916 28OCT10
T252996-28 | T253003-63 | T253004-59
Loading...