BACKHOES
93 NET HORSEPOWER
J
315SJ
Specifications
Specifications
Specifications
Engine 315SJ
Manufacturer and Model ....................John Deere PowerTechTM E 4045HT054 turbocharged, standard
Non-Road Emission Standards ................certified to EPA Tier 3 emissions
Displacement .............................276 cu. in. (4.5 L)
Net Peak Power (ISO9249) ...................93 hp (69 kW) @ 2,000 rpm
Net Peak Torque (ISO9249) ..................288 lb.-ft. (392 Nm) @ 1,300 rpm
Net Torque Rise ...........................47%
Lubrication ...............................pressure system with spin-on filter and cooler
Air Cleaner ...............................dual-stage dry type with safety element and evacuator valve
Cooling
Fan Type ................................suction
Engine Coolant Rating ......................–34 deg. F (–37 deg. C)
Engine Oil Cooler ..........................oil to water
Powertrain
Transmission ............................4-speed, helical-cut gears, full PowerShiftTM with hydraulic reverser standard; electric clutch cutoff on gearshift and loader levers
Torque Converter .........................single stage, dual phase with 2.63:1 stall ratio; 11 in. (280 mm)
Maximum Travel Speeds (with 16.9-28
rear tires) ............................Forward Reverse
Gear 1 ...............................3.8 mph (6.1 km/h) 4.8 mph (7.7 km/h)
Gear 2 ...............................7.0 mph (11.2 km/h) 8.8 mph (14.1 km/h)
Gear 3 ...............................14.2 mph (22.9 km/h) 14.0 mph (22.5 km/h)
Gear 4 ...............................23.7 mph (38.1 km/h) N/A
Axles
Axle Oscillations, Stop to Stop (both axles) .......22 deg.
Axle Ratings .............................. Mechanical-
Standard front-wheel drive Rear
Static ...............................39,683 lb. 26,455 lb. 28,660 lb.
(18 000 kg) (12 000 kg) (13 000 kg)
Dynamic .............................15,873 lb. 13,228 lb. 15,432 lb.
(7200 kg) (6000 kg) (7000 kg)
Ultimate .............................72,642 lb. 62,170 lb. 67,461 lb.
(32 950 kg) (28 200 kg) (30 600 kg)
Differentials .............................hydraulic locking front and rear, electric, foot actuated
Steering (ISO5010) ........................hydrostatic power and emergency steering
Axle .................................... Mechanical-
Non-powered front front-wheel drive
Curb-Turning Radius
With Brakes .......................11 ft. 4 in. (3.44 m) 11 ft. 9 in. (3.58 m)
Without Brakes .....................12 ft. 11 in. (3.94 m) 13 ft. 5 in. (4.08 m)
Bucket Clearance Circle
With Brakes .......................32 ft. 5 in. (9.89 m) 33 ft. 2 in. (10.11 m)
Without Brakes .....................35 ft. 4 in. (10.76 m) 36 ft. 3 in. (11.05 m)
Steering Wheel Turns (lock to lock) .........3.3 2.7
Final Drives
Mechanical-Front Wheel .................heavy-duty, outboard planetary final drives distribute shock loads over 3 gears
Rear Axle ............................heavy-duty, outboard planetary final drives distribute shock loads over 4 gears
Brakes (conform to SAE J1473)
Service ..............................power assisted, hydraulic wet disc, mounted inboard, self-adjusting and self-equalizing
Parking ..............................spring-applied, hydraulically released, wet, multi disc, independent of service brakes with electric switch control
PAGES
2–3
Hydraulics 315SJ
Main Pump ..............................open center, gear type, tandem with unloader
Pump Flow @ 2,200 rpm
Backhoe .............................36 gpm (136 L/m)
Loader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 gpm (106 L/m)
System Relief Pressure
Backhoe .............................3,625 psi (24 993 kPa)
Loader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,625 psi (24 993 kPa)
Backhoe Controls .........................two-lever manual standard; manual and/or electric auxiliary functions optional
Loader Controls ..........................single-lever control with electric clutch cutoff switch standard; manual auxiliary function optional
Cylinders
Type ...................................heat-treated, chrome-plated, polished rods; hardened-steel (replaceable bushings) pivot pins
Bore Rod Diameter Stroke
Loader Boom (2) .........................3.15 in. (80 mm) 1.97 in. (50 mm) 31.10 in. (790 mm)
Loader Bucket (1) ........................3.54 in. (90 mm) 1.97 in. (50 mm) 29.29 in. (744 mm)
Backhoe Boom (1) ........................4.72 in. (120 mm) 2.20 in. (56 mm) 31.30 in. (795 mm)
Backhoe Crowd (1) .......................4.53 in. (115 mm) 2.48 in. (63 mm) 24.47 in. (622 mm)
Backhoe Bucket (1) .......................3.54 in. (90 mm) 2.20 in. (56 mm) 31.89 in. (810 mm)
Heavy-Duty Option (1) ..................3.94 in. (100 mm) 2.48 in. (63 mm) 31.89 in. (810 mm)
Backhoe Swing (2). . . . . . . . . . . . . . . . . . . . . . . . 3.54 in. (90 mm) 1.97 in. (50 mm) 10.94 in. (278 mm)
Backhoe Extendable Dipperstick (1) .........2.76 in. (70 mm) 1.57 in. (40 mm) 42.01 in. (1067 mm)
Backhoe Stabilizer, Standard (2) ............2.76 in. (70 mm) 1.77 in. (45 mm) 28.19 in. (716 mm)
Non-Powered Axle (1) .....................2.76 in. (70 mm) 1.65 in. (42 mm) 8.39 in. (213 mm)
Mechanical-Front-Wheel Drive (1) ...........2.64 in. (67 mm) 1.65 in. (42 mm) 8.27 in. (210 mm)
Electrical
Voltage .................................12 volt
Alternator Rating ..........................90 amp
Operator Station
Type (SAE J1040) .........................cab, isolation mounted, ROPS/FOPS, left/right access, with molded roof
Tires/Wheels
Front Rear
Non-Powered Front Axle ....................11L-16 SL F-3 (12) 16.9-28 R-4 (10)
11L-16 SL F-3 (12) 19.5L-24 R-4 (10)
Mechanical-Front-Wheel Drive ................12.5/80-18 I-3 (10) 19.5L-24 R-4 (10)
340/80R18 XMCL 500/70R24 XMCL
12.5/80-18 I-3 (10) 16.9-28 R-4 (10)
Serviceability
Hydraulic Oil Filter, Spin-On Enclosed Replace-
able Element, Vertically Mounted ..........6-micron filtration / 1,000 service hours
Refill Capacities
Cooling System ........................26 qt. (25 L)
Rear Axle ............................19 qt. (18 L)
Engine Oil (including vertical spin-on filter) ....14 qt. (13 L)
Torque Converter and Transmission ........16.9 qt. (16 L)
Fuel Tank (with ground-level fueling) .......41 gal. (155 L)
Hydraulic System ......................24 gal. (91 L)
Hydraulic Reservoir .....................10.2 gal. (39 L)
Mechanical-Front-Wheel-Drive Housing
Axle .............................7 qt. (6.6 L)
Planetary (each) ....................1 qt. (1 L)
Operating Weights
Typical with Cab, Mechanical-Front-Wheel
Drive, Extendable Dipperstick, and
1,250-lb. (567 kg) Counterweight ..........18,600 lb. (8437 kg)
Optional Components
Cab .................................580 lb. (263 kg)
Mechanical-Front-Wheel Drive with Tires ....485 lb. (220 kg)
Extendable Dipperstick ..................490 lb. (222 kg)
Front Loader Coupler ....................630 lb. (286 kg)
Backhoe Bucket Coupler .................138 lb. (63 kg)
Overall Dimensions 315SJ
L
C
M
T
R
S
U
A
O
F
G
H
B
I
D
V
E
N
J
P
Q
K
A Ground Clearance (minimum) ..............14 in. (351 mm)
B Overall Length (transport) .................17 ft. 3 in. (5.26 m)
C Stabilizer Spread ........................7 ft. 10 in. (2.40 m)
D Height to Top of ROPS/Cab ................9 ft. 2 in. (2.79 m)
E Length from Axle to Axle
Non-Powered Front Axle ..............6 ft. 11 in. (2.11 m)
Mechanical-Front-Wheel-Drive Axle ......7 ft. 0 in. (2.14 m)
Backhoe Dimensions / Performance 315SJ
Backhoe specifications are with 24-in. x
7.5-cu.-ft. (610 mm x 0.21 m
Bucket Range ............................12–30 in. (305–762 mm)
Digging Force
Bucket Cylinder ........................11,990 lb. (53.3 kN)
With Heavy-Duty Cylinder Option .......15,236 lb. (67.8 kN)
Crowd Cylinder ........................8,090 lb. (36.0 kN)
Swing Arc ...............................180 deg.
Operator Control ..........................two levers
With Optional Extendable Dipperstick
Retracted Extended
F Loading Height (truck loading position) ......11 ft. 9 in. (3.58 m) 14 ft. 3 in. (4.34 m)
G Reach from Center of Swing Pivot ..........18 ft. 5 in. (5.61 m) 21 ft. 9 in. (6.63 m)
H Reach from Center of Rear Axle ...........23 ft. 0 in. (7.01 m) 26 ft. 4 in. (8.03 m)
I Digging Depth (SAE maximum) ............14 ft. 6 in. (4.42 m) 18 ft. 0 in. (5.49 m)
J Digging Depth (SAE)
2-ft. (610 mm) Flat Bottom ...............14 ft. 5 in. (4.40 m) 17 ft. 10 in. (5.44 m)
8-ft. (2440 mm) Flat Bottom ..............13 ft. 5 in. (4.09 m) 17 ft. 2 in. (5.22 m)
K Overall Width (less loader bucket) ..........8 ft. 2 in. (2.49 m) 8 ft. 2 in. (2.49 m)
L Side-Shift from Tractor Centerline ..........23 in. (584 mm) 23 in. (584 mm)
M Wall-to-Swing Centerline ................24.4 in. (620 mm) 24.4 in. (620 mm)
N Bucket Rotation ........................190 deg. 190 deg.
O Transport Height .......................11 ft. 5 in. (3.48 m) 11 ft. 5 in. (3.48 m)
3
) bucket
PAGES
4–5
Loader Dimensions / Performance 315SJ
A
|
B
|
C
|
D
|
SWING PIVOT
SWING PIVOT
DIPPER
LIFT
WITH
BOOM
AT 65°
BOOM
LIFT
SWING PIVOT
DIPPER
LIFT
WITH
BOOM
AT 65°
BOOM
LIFT
048121620
012 34567
FEET
METERS
048121620
012 34567
FEET
METERS
FEET
METERS
5
4
3
2
1
0
1
2
3
4
16
12
8
4
0
4
8
12
5
4
3
2
1
0
1
2
3
4
16
12
8
4
0
4
8
12
5
4
3
2
1
0
1
2
3
4
16
12
8
4
0
4
8
12
048121620
012 34567
3,119 (1415)
3,119 (1415)
3,049 (1383)
2,958 (1342)
2,862 (1298)
2,771 (1257)
2,684 (1217)
2,606 (1182)
2,536 (1150)
2,484 (1127)
2,462 (1117)
2,514 (1140)
4,981
(2259)
5,078 (2303)
5,712 (2591)
4,384 (1989)
2,184 (991)
2,197 (997)
2,188 (992)
2,158 (979)
2,127 (965)
2,092 (949)
2,023 (918)
2,053 (931)
1,997 (906)
1,975 (896)
1,971 (894)
1,988 (902)
2,058 (933)
2,945 (1335)
3,155 (1431)
3,373 (1530)
3,691 (1674)
4,390 (1991)
2,674 (1213)
3,745 (1699)
3,658 (1659)
3,537 (1604)
3,406 (1545)
3,276 (1486)
3,154 (1431)
3,045 (1381)
2,945 (1336)
2,854 (1295)
2,780 (1261)
2,723 (1235)
2,732 (1239)
5,585 (2533)
6,609 (2998)
5,785 (2624)
5,664 (2569)
11,389 (5166)
8,334
(3780)
BOOM
LIFT
DIPPER
LIFT
WITH
BOOM
AT 65
°
3,306 (1500)
P Bucket Dump Angle (maximum) ............45 deg.
Q Rollback Angle at Ground Level ............40 deg.
Heavy-duty Heavy-duty Heavy-duty long lip Heavy-duty Multipurpose Multipurpose
Bucket Capacity ...........................1.00 cu. yd. 1.12 cu. yd. 1.25 cu. yd. 1.31 cu. yd. 1.25 cu. yd. 1.31 cu. yd.
(0.77 m
3
) (0.86 m3) (0.96 m3) (1.00 m3) (0.96 m3) (1.00 m3)
Width ...................................86 in. (2184 mm) 86 in. (2184 mm) 86 in. (2184 mm) 92 in. (2337 mm) 86 in. (2184 mm) 92 in. (2337 mm)
Weight ..................................800 lb. (363 kg) 860 lb. (390 kg) 892 lb. (405 kg) 1,148 lb. (521 kg) 1,750 lb. (795 kg) 1,800 lb. (817 kg)
Breakout Force ...........................11,160 lb. (49.6 kN) 11,051 lb. (49.2 kN) 10,210 lb. (45.4 kN) 10,300 lb. (45.8 kN) 9,700 lb. (43.1 kN) 9,650 lb. (42.9 kN)
Lift Capacity (full height) ....................7,419 lb. (3368 kg) 7,353 lb. (3338 kg) 7,340 lb. (3332 kg) 7,200 lb. (3269 kg) 6,700 lb. (3042 kg) 6,600 lb. (2996 kg)
R Height to Bucket Hinge Pin (maximum) .......11 ft. 2 in. (3.40 m) 11 ft. 2 in. (3.40 m) 11 ft. 2 in. (3.40 m) 11 ft. 2 in. (3.40 m) 11 ft. 2 in. (3.40 m) 11 ft. 2 in. (3.40 m)
S Dump Clearance (bucket at 45 deg.) .........8 ft. 10 in. (2.69 m) 8 ft. 10 in. (2.69 m) 8 ft. 2 in. (2.48 m) 8 ft. 8 in. (2.64 m) 8 ft. 7 in. (2.62 m) 8 ft. 7 in. (2.62 m)
T Reach at Full Height (bucket at 45 deg.) ......30.9 in. (785 mm) 30.2 in. (767 mm) 35.9 in. (911 mm) 30.1 in. (765 mm) 32.2 in. (818 mm) 32.2 in. (818 mm)
U Digging Depth Below Ground (bucket level) ....6.3 in. (160 mm) 6.9 in. (175 mm) 5.8 in. (147 mm) 8.1 in. (206 mm) 7.3 in. (185 mm) 7.3 in. (185 mm)
V Length From Front Axle Centerline to
Bucket Cutting Edge .....................6 ft. 8 in. (2.03 m) 6 ft. 8 in. (2.03 m) 7 ft. 2 in. (2.18 m) 6 ft. 8 in. (2.03 m) 7 ft. 3 in. (2.20 m) 7 ft. 1 in. (2.15 m)
Lift Capacity with Quick-Coupler / Forks
A' Maximum Height .......................4,570 lb. (2073 kg)
B' Maximum Reach .......................6,971 lb. (3162 kg)
C' At Ground Line ........................9,138 lb. (4145 kg)
D' Below Ground Line .....................8.3 in. (211 mm)
Lift capacities are over-end values in lb. (kg) according to SAE J31. Figures listed are 87% of the maximum lift force available. Base vehicle includes counterweight.
315SJ Backhoe with Standard Dipperstick
315SJ Backhoe with 3-ft. 6-in. (1.07 m)
Extendable Dipperstick, Retracted
For more detailed spec information and available options, log on to www.JohnDeere.com.
315SJ Backhoe with 3-ft. 6-in. (1.07 m)
Extendable Dipperstick, Extended
315SJ BACKHOE LOADER
Key: l Standard equipment s Optional equipment *See your John Deere dealer for further information.
315SJ
Engine
l Certified to EPA Tier 3 emissions
l John Deere Model 4045HT054 – 4.5 liter, 93 net
peak hp (69 kW) turbocharged, isolation mounted
l Vertical spin-on engine oil filter
l Vertical spin-on fuel filter with water separator
l Oil-to-water engine oil cooler
l Antifreeze, –34°F (–37°C)
l Coolant recovery tank
l Serpentine belt with automatic belt tensioner
l Suction-type cooling fan
l Enclosed safety fan guard
s High ambient temperature engine cooling
l Dual-element dry-type air cleaner
l Muffler, under hood with curved-end exhaust
stack
s Electric ether starting aid
s Engine coolant heater, 1,000 watts
Powertrain
l PowerShift
electrically actuated twist grip F-N-R with neutral
safety switch interlock (1st through 4th gears)
TM
transmission: Torque converter with
l Transmission oil cooler
l Vertical spin-on transmission filter
s Transmission remote oil-sampling port
l Differential lock, electric foot-actuated
l Planetary final drives
l Power-assisted hydraulic service brakes
(conform to ISO 3450): Inboard, wet multi disc, self-adjusting self-adjusting and self equalizing
l Parking/emergency brake with electric switch
control (conforms to ISO 3450): Spring applied,
hydraulically released wet multi-disc / Indepen dent of service brakes
l Hydrostatic power steering with emergency
manual mode
s Non-powered front axle
l Mechanical-front-wheel-drive with traction
control limited-slip differential: Electric on/off
control / Driveshaft guard / Sealed axle
s Rear wheel spacers for use with chains
Backhoe
l Extendable dipperstick, 14-ft. 6-in. digging depth
s Heavy-duty backhoe bucket cylinder option
l Two-lever (Deere) backhoe controls
l Backhoe transport lock lever
l Swing lock pin stored in operator’s station
l Stabilizers with two-direction anti-drift valves
l Less bucket, with bucket pins
s Standard-duty backhoe bucket with lift loops
s Heavy-duty backhoe bucket with lift loops
s Severe-duty backhoe bucket with lift loops
s Backhoe coupler for “C,” “D,” “E,” and “G”
Series John Deere, Case, and Cat buckets
s Auxiliary backhoe valve for swingers, thumbs,
etc. with auxiliary plumbing
s Auxiliary backhoe valve for hammers and
compactors with auxiliary plumbing
Loader
†
315SJ
l Loader bucket anti-spill (rollback)
l Return-to-dig feature
l Single-lever control with electric clutch cutoff
switch
l Bucket-level indicator
l Loader boom service lock
s Ride control
s Auxiliary loader hydraulics with two-lever control
s Front loader hydraulic coupler for buckets,
forks, etc.
l Less bucket, with bucket pins
l High-visibility loader arms
Hydraulic System
l 36-gpm (136 L/min.) tandem gear pump,
open-center system
l Independent hydraulic reservoir
l “O”-ring face seal connectors
l 6-micron vertical spin-on filter
Electrical System
l 12-volt system
l 90-amp alternator
l Single battery with 190-min. reserve capacity
and 950 CCA
s Dual batteries with 380-min. reserve capacity
and 1,900 CCA
l Positive terminal battery cover
l Blade-type multi-fused circuits
l By-pass start safety cover on starter
s Master disconnect switch
l Jump/auxiliary start terminal
Lights
l Additional halogen work lights (6), 32,500
candlepower each (2 front, 2 rear, and 2 side
docking)
l Turn signal/flashing (2 front and 2 rear)
l Rear stop and tail (2)
l Rear reflectors (2)
Operator’s Station
l Modular-design ROPS/FOPS cab with molded
roof (conforms to SAE J1040): Isolation mounted
l Left and right access
l Slip-resistant steps and ergonomically located
handholds (conform to SAE J185)
l Molded floor mats
l Headliner
l Coat hook
l 12-volt outlets (2 cab, 1 canopy)
l Built-in beverage and Thermos bottle holders
l Built-in Operator’s Manual storage compart-
ment with manual
l Interior rearview mirror
s Outside rearview mirrors
l Rotary hand throttle
l Suspended foot throttle
l Tilt steering
l Horn
l Key start switch with electric fuel shutoff
s Electronic anti-theft enabled through monitor
315SJ
Operator’s Station (continued)
l Engine coolant temperature gauge, illuminated
electronic, with audible warning
l Oil temperature gauge, illuminated electronic,
with audible warning
l Fuel gauge, illuminated electronic
l Digital display of engine hours, engine rpm,
and system voltage
l Monitor system with audible and visual warnings:
Engine air restriction indicator / Low alternator
voltage indicator / Engine oil pressure indicator
with audible warning / Hydraulic filter restric tion indicator / Parking brake on/off indicator
with audible warning / Seat belt indicator / Low
brake pressure / Machine diagnostic informa tion via 4-pushbutton/LCD operator interface
l Mechanical suspension deluxe vinyl swivel
seat with lumbar adjustment and armrests
(fully adjustable)
s Mechanical suspension deluxe fabric swivel
seat with lumbar adjustment and armrests
(fully adjustable)
s Air suspension deluxe fabric swivel seat with
lumbar adjustment
l Seat belt, 2-in., with retractor
s Seat belt, 3-in., with retractor
s Cab: Headliner, dome light, left and right cab
doors, tinted safety glass, windshield wiper
(one rear and one front), front windshield washer,
fresh-air intake, heater/defroster/pressurizer
(40,000-Btu/hr. [11.7 kW] heater), and 12-volt
outlets (2)
s Air conditioner (26,000-Btu/hr. [7.6 kW] output
and CFC-free R134a refrigerant)
s AM/FM/weather-band radio
s AM/FM/weather-band radio with CD player
Overall Vehicle
l One-piece unitized construction mainframe
l Vehicle tie-downs (2 front and 2 rear)
l Remote grease bank for front axle
l Heavy-duty front bumper
s 450-lb. (204 kg) front counterweight
s 700-lb. (317 kg) front counterweight
s 1,000-lb. (454 kg) front counterweight
s 1,250-lb. (567 kg) front counterweight
s 1,450-lb. (657 kg) front counterweight
s Rubber grille bumpers
l Fuel tank, 41 gal. (155 L), ground-level fueling
l Two-position easy-tilt hood
l Extended grille frame
l Removable toolbox with padlock hasp
l Vandal protection for locking monitor, engine
hood, toolbox, hydraulic reservoir, and fuel tank
l Reverse warning alarm
s Sound-reduction package
l Dent-resistant full-coverage rear fenders
s JDLink
†
See dealer for range of heavy-duty, multipurpose,
and coupler buckets and forks.
TM
wireless communication system
12-19-08
Net engine power is with standard equipment including air cleaner,
exhaust system, alternator, and cooling fan at test conditions specified per ISO9249. No derating is required up to 10,000-ft. (3050 m).
Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE standards.
Except where otherwise noted, these specifications are based on a unit with 16.9-28 R-4 (10) rear and 11L-16 SL F-3 (12) front tires,
1.31-cu.-yd. (1.00 m
3
) loader bucket, and 24-in. x 7.5-cu.-ft. (610 mm x 0.21 m3) backhoe bucket.
Loading...