Page 1
COMMERCIAL WORKSITE PRODUCTS
SKID STEERS
300-SERIES
313 | 315
Page 2
Even less
Even less
Even less
of a good thing.
of a good thing.
of a good thing.
Like their bigger 300-Series Skid Steer
siblings, the 313 and 315 deliver best-inclass stability, visibility, and serviceability.
Lightweight and agile, yet surprisingly power
ful, these highly capable compacts are the
perfect size for confi ned areas. Easy to
transport between jobsites, too. So you
can get more done, more reliably, for less.
-
PAGES
2–3
Features such as heavy-duty drive chains
that never need adjustment, easy-to-fi ll
large-capacity fuel tank, and a self-cleaning,
no-grease Quik-Tatch
to maintain as they are to run. Plus, these
little dynamos are highly versatile. Equip one
with any of the many Worksite Pro
ments, and watch productivity take off.
™
ensure they’re as easy
™
attach-
Page 3
313 and 315 are as inexpensive to own as they are to acquire.
Daily and periodic maintenance is quick, convenient, and minimal.
John Deere 2.4-L diesel engine runs smooth and ef fi ciently. Meets
Tier 4 interim emission standards, too.
Best-in-class visibility provides clear sight lines to the bucket
or attachment, edge of the tires, and out back. For increased
confi dence and productivity, even in close quarters.
Boom design delivers excellent reach through the “work zone.”
Perfect for loading pickup trucks, placing pallets, and loading
hoppers and spreaders.
Large standard tires (10x16.5 inches) offer good balance, traction,
and fl otation. Or equip them with 7x15 tires to navigate narrow
openings less than 5-feet wide.
Specifi cations 313 315
Net hp .......................... 45 hp .................45 hp
*
Width ........................... 59 in.
................59 in.
Rated Operating .......... 1,260 lb. ...........1,500 lb.
Capacity
Tipping Load ............... 2,525 lb. ...........3,000 lb.
* 56 in. with optional 7x15 tires
*
Page 4
Impressive tipping load and rated operating capacities let you master
a variety of material-handling tasks.
Boom design keeps the load close to the machine, close to the ground
for carrying heavy loads. Combined with their low center of gravity and
generous ground clearance, these skid steers are productively agile.
Smooth-running turbocharged 2.4-L John Deere diesels deliver power
without compromise. Pack plenty of torque reserve, too, for daylong
stamina and strength.
1. 40 -degree dump angle enables buckets to
empty completely, shedding even sticky
material. Exclusive cushioned bucket and lift
cylinders reduce spillage.
2. Only 5-feet wide, these skid steers are per-
1
fect for vir tually any kind of work in confi ned
areas. If you’re really in a tight spot, opt for
the 7x15 tires and 56-inch bucket.
3. Impressive axle torque and bucket breakout
force allow you to dig, pry, and push more
easily, for faster, fuller loads.
4. 30 degrees of rollback help ensure that
the load arrives at its intended destination
instead of somewhere in-between.
5. Standard and high-fl ow (available on 315)
auxiliary hydraulics provide the fl uid power
needed to drive a wide variety of attachments.
2
3
4
5
Page 5
Lightweight agility,
Lightweight agility,
Lightweight agility,
heavyweight ability.
heavyweight ability.
heavyweight ability.
Whether you’re tiptoeing around zero lot lines,
tending livestock, laboring indoors, or removing
snow, these nimble skid steers won’t have
any trouble fi tting in. Their small stature
enables the 313 and 315 to slip comfortably
through narrow openings and into tight
quarters. Makes them easy to trailer and easy
on turf, too. But these “lightweights” won’t
get pushed around. Optimal 60/40-weight
distribution gives them the stability needed
for handling heavy loads. Impressive breakout
force and 1,260- and 1,500-lb. rated operating
capacities deliver plenty of productive punch.
And their high-torque turbocharged 2.4-L diesels
won’t throw in the towel when the going gets
tough, either. With the 313 and 315, it’s not the
size of the skid steer in the fi ght, but the size
of the fi ght in the skid steer.
PAGES
4–5
Page 6
Compact machine,
Compact machine,
Compact machine,
super-sized comfort.
super-sized comfort.
super-sized comfort.
Who says compact has to mean uncomfortable? Slip-resistant steps, convenient grab bars,
and wide-open entryways make it easy to
settle into the adjustable high-back sculpted
seat. Low-effort controls are intuitive and
responsive. Overhead, the electronic monitor
is easy to see and operate, with backlit gauges,
LED warning lights, and glove-friendly rocker
switches. Industry-leading 360-visibility provides a commanding view of the work at
hand for confi dent operation in close quarters. And like all John Deere machines,
safety features abound. An in-cab-activated
boom lock and triple-interlock operatorpresence system help keep the operator out
of harm’s way.
PAGES
6–7
Page 7
Triple-interlock operator-presence system automatically applies the
brakes when the seat belt is unlatched, the operator leaves the seat,
or the engine is shut down.
Industry-exclusive in-cab-activated boom lock lets the operator secure
the loader arms in an upright position before leaving the seat.
Steering controls are smooth, responsive, and deliver precise low-effort
control that won’t overreact to a bump in the road — or a fi rst-time
operator’s unfamiliar touch.
Clear sight lines to the cutting edge and bucket corners, above and below
the lift arms, and the jobsite behind you add up to best-in-class visibility.
It’s a commanding view you have to sit in the seat to appreciate, so ask
for a demo.
Available digital-coded antitheft security system is simple to use and
includes automatic end-of-day activation.
Add a cab with highly effi cient heater for additional comfort.
Convenient 12-volt port powers cell phones and other carry-ons.
Interior dome light and cup holder are also standard.
1. Comfortable sculpted high-back seat has
a vinyl cover and shape that sheds rain.
Seat belt automatically retracts.
2. Overhead console houses an easy-to-read
diagnostic monitor. Large backlit gauges and
LED warning lights display vital operating
info at a glance.
3. Optional push-button-activated Quik-Tatch
enables an operator to hook up attachments
without leaving the seat.
4. Decreased lever efforts and ergonomically
correct adjustable armrests help reduce
operator fatigue. Foot-pedal angle is adjustable for enhanced comfort and control.
4
1
2
3
Page 8
Pickup brooms help keep jobsites clean and dust to a minimum.
High-torque drive motors ensure long-term dependability.
Self-cleaning universal Quik-Tatch accommodates John Deere Worksite
Pro™ and numerous other brands of attachments. With optional electricactuated version, swapping attachments is push-button easy.
Auxiliary hydraulics with convenient fl at-face quick-couplers are standard.
Or opt for high-fl ow on the 315 to power hydraulic-thirsty tools.
Worksite Pro attachments are optimized to work on John Deere 300-Series
1
Skid Steers, and are compatible with many competitive models.
2
1. Power rake is perfect for seedbed or site prep. Exclusive forward and
backward operation increases productivity.
2. Snow/utility blade angles hydraulically 30 degrees right or left. Trip
3
4
springs protect skid steer from sudden impacts.
3. Compact size and high power-to-weight ratio let Worksite Pro breakers
work where others won’t, providing unsurpassed durability.
4. Rail- or pin-style forks are available with 42- or 48-inch tine lengths.
Rail style allows tines to follow the terrain contour.
5. Tapered bale spear’s three-point design provides additional support
and stability.
6. From manure to metals to whatever — a variety of grapples help
simplify material-handling chores.
7. Removable backhoe connects quickly and provides a 7-foot digging
depth. Two-lever controls provide simplifi ed operation.
5
6
7
Page 9
Get connected.
Get connected.
Get connected.
If you’re looking to expand your business
opportunities, look to your John Deere skid
steer dealer. With nearly 100 models of
Worksite Pro attachments available, they
can hook you up with a wide variety of
tools to help put more work within reach.
And with the universal Quick-Tatch,
you can
go from bucket, to grapple, to whatever, in
just seconds. Each skid steer delivers plenty
of standard hydraulic power (or optional highfl ow on the 315) to operate augers, breakers,
trenchers, or power rakes, to list just a few.
To learn more about the entire Worksite Pro
lineup, see your John Deere dealer.
PAGES
8–9
Page 10
Nothing lasts like
Nothing lasts like
Nothing lasts like
a Deere.
a Deere.
a Deere.
Don’t let their small size fool you. Incorporating many of the same durability
features found on our larger skid steers, the
313 and 315 are as tough as they come.
Advantages such as sealed electrical connectors, O-ring face-seal hydraulic fi ttings,
PAGES
10–11
large coolers, and extended service intervals keep downtime down. Plus, a standard automatic shutdown system prevents
overheating or low fl uids from ruining more
than just your day. When you know how
they’re built, you’ll run a Deere.
Page 11
Heavy-duty fi nal-drive chains withstand daily punishment without ever
requiring adjustment.
O-ring face-seal hydraulic fi ttings virtually eliminate aggravating and
costly oil leaks.
Wet-disc park brakes are fully enclosed and never require adjustment.
Precision-joint connecting rods and rolled fi llet crankshafts ensure long
engine life.
500-hour engine oil service intervals allow these skid steers to work
longer between changes.
Automatic shutdown system monitors engine oil pressure, coolant, and
hydraulic oil temperature. When limits are exceeded, the system issues
an audible warning and if necessary, shuts down the machine.
1. Cast axle housings and large one-piece
forged and heat-treated shafts provide
superior strength. A double-lip seal and wiper
ring protect the tapered roller bearings.
2. Heavy-duty cross-section boom arm design
provides long-term durability and strength.
3. Large coolers provide increased heat
rejection for superior performance in severe,
high-load conditions.
4. Rocker switches and electrical connectors
are sealed to keep out moisture and dirt for
increased durability.
4
1
2
3
Page 12
Simply remove two nuts
and tilt the ROPS for wideopen access to major
components in less
than two minutes.
Self-cleaning Quik-Tatch
never needs greasing.
Rotating pawl mechanism
sheds dirt and resists buildup
every time it’s engaged.
Serpentine engine belt and
hydraulic valve lifters never
require adjustment.
500-hour engine oil, and
3-micron hydraulic, and
5-micron fuel fi lters provide
extra protection.
Swing open the rear
door and tilt up the
hood for convenient,
ground-level access
to engine components,
fi lters, starter, and
maintenance-free battery.
Page 13
Ti ghtwa ds.
Ti ghtwa ds.
Ti ghtwa ds.
Tight spaces aren’t the only place these highly
capable compacts excel. They’re tightfi sted
with your dollars, too. Everything about the 313
and 315 has been designed to keep maintenance
simple and daily operating costs low. A swingout rear door provides wide-open, ground-level
access to cooling system components and daily
service checkpoints. Refueling and other fl uid
1. Fuel tank/fi ller neck position allows fast and
easy fi ll-up, even with heavy fuel cans. Generous fuel capacity allows daylong operation.
4. Spin-on engine fi lter and oil-drain tray
allow quick, no-mess changes.
2. Rear-door-mounted oil cooler swings out
for easy radiator and cooler core clean-out.
5. Front debris access allows easy material
clean-out. No jacks necessary.
additions are convenient and quick. Never-grease
Quik-Tatch, remote hydraulic oil drain, and easyaccess spin-on fi lters further minimize effort and
expense. When necessary, the ROPS can be tilted
in less than two minutes, providing best-in-class
wide-open access to major components. Parts
and service are just as easily accessible at more
than 1,100 John Deere dealers coast to coast.
3. Engine oil dipstick and fi ller neck are
easily accessible for fast and easy checks
and additions.
6. See-through reservoirs let you check fuel,
hydraulic oil, and windshield washer fl uid
levels at a glance.
1
4
2 3
5 6
PAGES
12–13
Page 14
Specifi cations
Specifi cations
Specifi cations
Engine 313 / 315
Manufacturer and Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . John Deere PowerTechTM 4024T
Non-Road Emission Standards . . . . . . . . . . . . . . . . . . . . . . . . . certifi ed to EPA interim Tier 4 emissions
Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Net Horsepower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 net hp (33.5 kW)
Gross Horsepower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 gross hp (36.5 kW)
Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 cu. in. (2.4 L)
Rated Engine Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,400 rpm
Gross Peak Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 lb.-ft. (188 Nm)
Torque Rise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32%
Aspiration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . turbocharged
Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . dry dual element
Cooling
Fan Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . auto-tensioned serpentine belt drive
Engine Coolant Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –34°F (–37°C)
Powertrain 313 315
Hydrostatic-manual; four-wheel drive; four 80 heavy-duty chain, continuous loop
Single Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.8 mph (10.9 km/h) 6.8 mph (10.9 km/h)
System Relief Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5,000 psi (34 474 kPa) 5,000 psi (34 474 kPa)
John Deere Axles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . induction hardened, one-piece forged axle shafts with induction hardened, one-piece forged axle shafts with
maintenance-free auto lubrication of inner and outer maintenance-free auto lubrication of inner and outer
axle bearings axle bearings
Maximum Axle Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,420 lb.-ft. (4651 Nm) 4,050 lb.-ft. (5508 Nm)
Tractive Effort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5,650 lbf (2563 kgf) 6,700 lbf (3039 kgf)
Final Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #80 HZ high-strength, adjustment-free chains #80 HZ high-strength, adjustment-free chains
Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . integral, automatic, spring-applied, hydraulically integral, automatic, spring-applied, hydraulically
released wet-disc park brake released wet-disc park brake
Hydraulics
Three-spool open-center valve; O-ring face-seal hydraulic fi ttings to prevent oil leaks; auxiliary hydraulics with fl at-faced couplers; loader arm, bucket, and auxiliary hydraulic lockout
system and auxiliary lockout override
Pump Flow
Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 gpm (57 L/m) 16 gpm (61 L/m)
Total with High-Flow Option . . . . . . . . . . . . . . . . . . . . . . . . N/A 25 gpm (95 L/m)
System Pressure at Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . 3,450 psi (23 787 kPa) 3,450 psi (23 787 kPa)
Hydraulic Horsepower Flow (calculated)
Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 hp (23 kW) 35 hp (26 kW)
High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A 45 hp (34 kW)
Cylinders 313 / 315
John Deere heat-treated, chrome-plated, polished cylinder rods; hardened steel (replaceable bushings) pivot pins; integrated bucket cylinder cushions on both curl and dump, and
integrated cushioned cylinders on boom lower
Electrical
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 volt
Battery Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750 CCA (optional 925 CCA)
Alternator Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 amp
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . halogen, two (2) front and one (1) rear standard
Tires/Wheels
Standard Tire Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 x 16.5 8 PR Extra Wall
Serviceability
John Deere engine features: less maintenance with never-adjust hydraulic valve lifters and auto-tensioned fan belt; John Deere brakes features: sealed wet-disc brakes, auto-lube
axles, and never-adjust fi nal-drive chains; rear-door-mounted oil cooler swings out for easy radiator and cooler separation and clean-out; operator-activated in-cab boom lock to
safely secure loader before exiting the operator seat for service; no-tools-required engine oil-drain valve
PAG ES
14–15
Page 15
Serviceability (continued) 313 315
Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . computerized in-cab monitor information computerized in-cab monitor information
Filters
Engine Oil Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . horizontally mounted with integrated environmentally horizontally mounted with integrated environmentally
friendly drip tray friendly drip tray
Fuel Filter with Water Separator . . . . . . . . . . . . . . . . . . . . . vertically mounted vertically mounted
Secondary Fuel Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vertically mounted vertically mounted
Hydraulic Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-micron, vertically mounted 3-micron, vertically mounted
Return Oil Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-micron, spin-on enclosed replaceable element 3-micron, spin-on enclosed replaceable element
Sight Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . hydraulic reservoir hydraulic reservoir
Refi ll Capacities
Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.5 gal (66 L) 17.5 gal (66 L)
Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 qt. (6.2 L) 7 qt. (6.2 L)
Engine Oil with Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.5 qt. (9 L) 9.5 qt. (9 L)
Hydraulic Fluid (refi ll) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 gal. (19 L) 5 gal. (19 L)
Chain Case (per side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9 gal. (14.8 L) 4.3 gal. (16.3 L)
Operating Weights
Base Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5,150 lb. (2338 kg) 5,200 lb. (2361 kg)
Machine Dimensions
A Length without Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ft. 0 in. (2.44 m) 8 ft. 5 in. (2.57 m)
B Length with Bucket (60-in. foundry) . . . . . . . . . . . . . . . . . . . 10 ft. 4 in. (3.14 m) 10 ft. 9 in. (3.27 m)
C Width without Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ft. 11 in. (1.50 m) 4 ft. 11 in. (1.50 m)
Equipped with Optional 7 x 15 Tires . . . . . . . . . . . . . . . 4 ft. 8 in. (1.47 m) 4 ft. 8 in. (1.47 m)
D Height to Top of ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ft. 5 in. (1.96 m) 6 ft. 5 in. (1.96 m)
E Height to Hinge Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ft. 1 in. (2.77 m) 9 ft. 7 in. (2.91 m)
F Dump Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ft. 0 in. (2.13 m) 7 ft. 5 in. (2.26 m)
G Dump Reach
Foundry Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.4 in. (442 mm) 15.8 in. (401 mm)
Construction Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . 23 in. (0.58 m) 21 in. (0.54 m)
H Wheelbase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ft. 2 in. (0.95 m) 3 ft. 5 in. (1.04 m)
I Ground Clearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.6 in. (193 mm) 7.6 in. (193 mm)
J Angle of Departure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 deg. 23.5 deg.
K Front Turn Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ft. 2 in. (1.89 m) 6 ft. 4 in. (1.93 m)
L Dump Angle (full lift height) . . . . . . . . . . . . . . . . . . . . . . . . . 40 deg. 40 deg.
M Bucket Rollback (ground level) . . . . . . . . . . . . . . . . . . . . . . . 30 deg. 30 deg.
Maximum Reach with Arms Parallel to Ground . . . . . . . . . . . 3 ft. 11 in. (1196 mm) 3 ft. 11 in. (1196 mm)
Tipping Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,525 lb. (1146 kg) 3,000 lb. (1362 kg)
SAE Rated Operating Capacity . . . . . . . . . . . . . . . . . . . . . . . 1,260 lb. (572 kg) 1,500 lb. (681 kg)
With Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,400 lb. (636 kg) 1,650 lb. (749 kg)
Boom Breakout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,800 lb. (1271 kg) 3,900 lb. (1771 kg)
Bucket Breakout Force
Foundry Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,300 lb. (1498 kg) 3,300 lb. (1498 kg)
Construction Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . 2,178 lb. (989 kg) 2,440 lb. (1108 kg)
Page 16
313 / 315 RADIAL SKID STEER LOADERS
Key: ● Standard equipment ▲ Optional or special equipment See your John Deere dealer for further information.
313 315
● ●
● ● John Deere PowerTech
4-cylinder engine
Engine
Certifi ed to EPA interim Tier 4 emissions
TM
turbocharged
● ● Automatic fan-belt tensioner
● ● Automatic preheat
● ● John Deere COOL-GARD
Engine Coolant
● ● John Deere Plus-50
engine oil fi ll*
®
Extended-Life
®
10w30 initial
● ● No-tools-required engine oil-drain spigot
● ● 5-micron primary fuel fi lter and water
separator
▲ ▲ Block heater
Cooling System
● ●
Coolant recovery tank
● ● Enhanced cooling system
● ● Swing-out hydraulic oil cooler
Powertrain
● ●
chains (adjustment not required)
High-strength, heavy-duty fi nal-drive
● ● Spring-applied hydraulically released
wet-disc park brake
● ● Wet-disc brakes
Hydraulic System
● ●
Boom cylinders cushioned on lower
● ● Twin John Deere cushioned front bucket
cylinder on both curl and dump
● ● Quick-check hydraulic fl uid-level
sight glass
● ● 3-micron hydraulic fi lter
▲ High-fl ow hydraulics
Electrical
● ●
Automatic shutdown with alarm
● ● Auxiliary hydraulics operation presence
system
● ● Battery, 750 cca
313 315
Electrical (continued)
▲ ▲ Battery, 925 cca
● ● Deluxe instrumentation EMU with:
Operator selectable monitoring – Hour
meter, engine rpm, battery voltage,
diagnostics, EMU confi guration,
engine coolant temperature, hydraulic
oil temperature
LED warning indicators – Glow plug, seat
switch, seat belt, door open, auxiliary
hydraulics, park brake engaged, two
speed engaged, stop, low engine oil
pressure, engine coolant over-temper ature, battery not charging, air fi lter
restriction, hydraulic fi lter restriction
● ● Front and rear halogen work lights
▲ ▲ Monitor-integrated antitheft system
● ● Triple interlock operator-presence control
system
▲ ▲ Backup alarm
▲ ▲ Dual fl ashers
▲ ▲ Handle kit, 8-button
▲ ▲ Horn
▲ ▲ Warning beacon kit
Operator’s Station
● ●
12-volt power port
● ● Adjustable armrests
● ● Adjustable foot pedals
● ● Beverage holder
● ● Cargo storage net
● ● Floor cover plates
● ● Grab handles (2)
● ● Headliner
● ● Interior dome lighting
● ● Quick-pivot ROPS
● ● Rear window
● ● ROPS/FOPS operator structure
● ● Seat belt with auto recoil
313 315
Operator’s Station (continued)
● ● Water-shedding deluxe vinyl seat
▲ ▲ Acoustical noise-suppression package
▲ ▲ Cab enclosure
▲ ▲ Demolition door
▲ ▲ Hand controls
▲ ▲ Heater/defroster
▲ ▲ Rearview mirror kit
▲ ▲ Seat belt, 3-in.
▲ ▲ Shoulder belt
▲ ▲ Side window kit
▲ ▲ Suspension seat
▲ ▲ Top window
▲ ▲ Vinyl cab enclosure kit
Loader
● ●
Integral cab boom lock
● ● John Deere radial-lift boom system with
superior visibility
● ● Patented John Deere Quik-Tatch
TM
▲ ▲ Power Quik-Tatch
▲ ▲ Hydraulic self-leveling
Other
● ●
● ● Environmental drains for all fl uid reservoirs
▲ ▲ JDLink
Convenient front and rear tie downs
TM
wireless communication system
▲ ▲ Rear counterweights
▲ ▲ Single-point lift kit
▲ ▲ SMV sign kit
▲ ▲ Spare tire and wheel
▲ ▲ Tire options:
Flotation
Foam fi lled
Heavy-duty
Narrow
Solid
*500-hour engine oil change intervals when John Deere Plus-50
oil and John Deere oil fi lter are used.
CONTROL OWNING AND OPERATING COSTS
Customer Personal Service (CPS) is part of John Deere’s proactive, fi x-before-fail
strategy on machine maintenance that will help control costs, increase profi ts,
and reduce stress. Included in this comprehensive lineup of ongoing programs
and services are:
Fluid analysis program – tells you what’s going on inside all of your
machine’s major components so you’ll know if there’s a problem before you
see a decline in performance. Fluid analysis is included in most extended
coverage and preventive-maintenance agreements.
Preventive Maintenance (PM) agreements – give you a fi xed cost for
maintaining a machine for a given period of time. They also help you avoid
downtime by ensuring that critical maintenance work gets done right and on
schedule. On-site preventive maintenance service performed where and when
you need it helps protect you from the expense of catastrophic failures and lets
you avoid waste-disposal hassles.
Net engine power is with standard equipment including
air cleaner, exhaust system, alternator, and cooling fan, at
standard conditions per SAE J1349 and DIN 6270B, using No.
2-D fuel at 35 API gravity. Gross power is without cooling fan.
DKA31315CWP Litho in U.S.A. (07-10)
Specifi cations and design subject to change without notice. Wherever applicable, specifi cations are in accordance with SAE
standards. Except where otherwise noted, these specifi cations are based on units with standard equipment, full fuel tanks,
and 175-lb. (79 kg) operators.
Extended warranty coverage – gives you a fi xed cost for machine repairs
for a given period of time so you can effectively manage expenses. Whether
you work in a severe-service setting, or you just want to spread the risk of
doing business, this is a great way to custom-fi t coverage to your operation.
Choose from engine, powertrain, powertrain with hydraulics, or full-machine
two-year/2,000-hour or three-year/3,000-hour coverage. An extended coverage
contract travels well because it’s backed by John Deere and honored at all John
Deere Commercial Worksite Products dealers. What’s more, extended coverage
is fully transferable at no extra charge, so it adds value at trade-in.
Customer Support Advisors (CSAs) – Deere believes the CSA program
lends a personal quality to Customer Personal Service (CPS). Certifi ed CSAs
have the knowledge and skills for helping make important decisions on machine
maintenance and repair. Their mission is to help you implement a plan that’s
right for your business and take the burden of machine maintenance off your
shoulders.
Loading...