John Deere 315 User Manual

313, 315, and CT315 Skid Steer

UPTIME MAINTENANCE PLANNER

• Add coolant extender as indicated by COOL-GARD™ II test strips

Every 10 Hours or Daily

As Required

• Check engine oil level

• Check hydraulic oil tank level

• Clean radiator and oil cooler

• Check coolant level

• Check or drain fuel water separator filter

• Check or drain auxiliary water separator/fuel filter—if equipped

Every 50 Hours

• Check tire pressure—if equipped (313 and 315 only)

• Lubricate cylinder pivot points

• Check track sag—if equipped (CT315 only)

• Lubricate Quik-Tatch™ linkage • Lubricate boom linkage

Initial Service - 250 Hours

• Change engine oil and replace filter

Every 250 Hours

• Take engine oil sample

• Check wheel lug nut torque—if equipped (313 and 315 only)

Initial Service - 500 Hours

• Change hydrostatic planetary gear case oil—if equipped (CT315 only)

Every 500 Hours

• Take hydraulic oil sample

• Take transmission oil sample

• Replace primary air cleaner element • Check chain case oil level—if equipped (313 and 315 only)

• Change engine oil and replace filter

• Replace water separator/fuel filter

• Replace in-line fuel filter

• Lubricate steering linkage • Lubricate foot pedals

• Take hydrostatic planetary gear case oil sample—if equipped (CT315 only)

• Take diesel fuel sample

• Take engine coolant sample

• Replace hydraulic oil filter

• Replace hydraulic oil tank breather element

• Replace auxiliary water separator/fuel filter—if equipped

• Take hydraulic planetary gear case oil sample—if equipped (CT315 only)

Every 1000 Hours

• Check coolant

• Replace secondary air cleaner element

• Change hydrostatic planetary gear case oil—if equipped (CT315 only)

• Change hydraulic tank oil

• Change chain case oil—if equipped (313 and 315 only)

Every 6000 Hours

• Drain, flush, and refill cooling system

T228243 25MAR13

T228244-28 | T243923-59 | T228245-63

UPTIME MAINTENANCE PLANNER

250

500

1000

6000

Hours

TY26669

TY6382

REQUIRED PARTS

Description Part Number

Engine Oil Filter RE519626

Initial

Service1 —

250 Hours

Every Every Every Every

Initial

Service2 —

500 Hours

1 1 1

In-line Fuel Filter T257865 1 1 1 Water Separator/FuelFilter Auxiliary Water Separator/Fuel Filter—

RE508202 1 1 1 AT365870 1 1 1

If Equipped Primary Air Cleaner Element Hydraulic Oil Tank Breather Element Hydraulic System Return Oil Filter Secondary Air Cleaner Element John Deere PLUS-50™ II Oil

Engine

Hydraulic Tank

AT338105 1 1 1 AT101565 1 1 1 AT314164 1 1 1 AT336803

9.0 L 9.0 L 9.0 L 9.0 L

(2.4 gal.) (2.4 gal.) (2.4 gal.) (2.4 gal.)

1 1

19.0 L 19.0 L

(5.0 gal.) (5.0 gal.)

Chain Case Only

313 (per side)

315 (per side)

Hydrostatic Planetary Gear Case Oil— If Equipped (CT315 onl y) COOL-GARD™ II Pre-Mix

TY26575 6.2 L

0.55 L 0.55 L 0.55 L

14.8 L 14.8 L

(3.9 gal.) (3.9 gal.)

16.3 L 16.3 L

(4.3 gal.) (4.3 gal.)

(18.6 oz) (18.6 oz) (18.6 oz)

(1.7 gal.)

Coolant Extender

TY26603

As Required

Fluid Analysis Kits

Diesel Engine Oil AT346594 1 1 1 1 Diesel Fuel AT180344 1 1 1 Hydraulic & Hydrostatic Oil AT346594 1 1 1 Hydraulic & Hydrostatic Planetary Gear

AT346594 2 2 2 Case Oil Engine Coolant TY26873 1 1 1 COOL-GARD™ II Test Strips TY26605 1 1

Perform initial service once after first 250 hours of operation, then every 500 hours thereafter.

Perform initial service once after first 500 hours of operation, then every 1000 hours thereafter. See operator's manual for recommended oil type and oil viscosities based on operating t emperatures. Based on fluid analysis results, intervals may need to be adjusted for operating conditions. Consult your local John Deere dealer.

T228243 25MAR13

T228244-28 | T243923-59 | T228245-63