Jensen JRX240, JRX252, JRX357, JRX246, JRX369 User Manual 2
...
JRX Speakers
Installation Manual
JRX235
JRX240
JRX246
JRX252
JRX357
JRX365
JRX369
JRX650
INTRODUCTION
Thank you!
Para obtener instrucciones en Español, diríjase a la página 7.
Pour des instructions en Francais, référez-vous à la page 13.
Thank you for purchasing this quality Jensen product!
JRX speaker system is the ultimate complement to your car stereo
system. The JRX speakers feature polypropylene cones, nitrile
rubber surrounds, optimized magnet systems and polycarbonate
tweeters with neodymium magnets for unparalleled audio
reproduction and outstanding durability. The JRX series will deliver
the natural sound you have come to expect from Jensen.
The speaker system should be connected to your car radio or an
additional car stereo amplifier, which we recommend for even
better sound quality. Technical data plus installation tips and
further advice are contained in this instruction manual.
Your new
Highlighted Features
! Black high gloss, warp-resistant, low-resonance steel basket
! Low distortion polypropylene woofer cones for smooth
frequency response and great weather resistance
! Nitrile rubber surrounds for excellent damping
! Vented spiders increase power handling and linearity
! Klippel laser-optimized magnet systems provide outstanding
bass performance
! Metal mesh grilles included on select models
1
JRX Speakers
INTRODUCTION
Welcome to Jensen!
This manual is designed to provide information for the owner,
salesperson and installer. For those of you who want quick
information on how to install this product, please turn to the
Installation Section of this manual. Other information can be
located by using the Table of Contents. We at Jensen have
worked very hard to make sure all the information in this manual is
current. But, as we are constantly finding new ways to improve our
product, this information is subject to change without notice.
Installation .......................................................................Page 3
Specifications ..................................................................Page 5
Warranty..........................................................................Page 6
If, after reading your manual, you still have questions regarding
this product, we recommend that you see your Jensen dealer. If
you need further assistance, you can call us direct at 1-800-323-
4815.
Be sure to have your model number and date of purchase
available when you call. Please read your warranty clearly and
retain your receipt for possible future use.
Preparation
! Disconnect battery cable from negative ( - ) battery terminal.
WARNING: Check vehicle's owner's manual before
disconnecting the battery. Disconnecting the battery in
some vehicles may require an anti-theft code when
reconnecting. Some vehicles may run rough after
reconnecting the battery and require that the on-board
computer be reset at the dealership. Check with your local
dealer if you are uncertain.
! Check all safety regulations in your vehicle's owner's manual.
! To ensure an obstacle-free fit, check and double check
mounting depth of the speakers against available depth, as
well as the location of window mechanics, door handles, and
window handles.
! If using provided grilles, be sure mounting location is sufficient
distance from door and/or window handles.
Required Tools
The following is a list of tools needed for installation:
! #2 Philips screwdriver
! Battery post wrench
! Hand held drill w/assorted bits
! Wire strippers
! Wire crimpers
! Wire cutters
Since some of these Jensen full range speakers are most often
used as direct replacements for stock speakers, some of the
following instructions will not apply. For custom installations see
your authorized Jensen dealer.
2
INSTALLATION
Basic Installation Steps
Step 1: Remove existing speaker.
Step 2: Position new speaker and align with existing mounting
holes.
Step 3: Attach the positive (+) and negative (-) speaker terminals
(see FIGURE 2). Be sure to observe proper polarity when
connecting the wires (the striped wire is the negative
lead).
Step 4: If not using factory grilles, attach grille.
Step 5: Mount speaker (using factory hardware when possible).
Step 6: Reconnect negative battery terminal.
FIGURE 2 - CONNECTING SPEAKER WIRES
FIGURE 1 - DOOR PANEL INSTALLATION
Grille
Speaker
FIGURE 3 - REAR DECK INSTALLATION
Door Panel
3
JRX Speakers
INSTALLATION
Installing the Tweeter for the JRX650
The separate tweeters included with the JRX650 have a variety of
mounting applications. During installation, make sure the tweeter
is positioned and aimed towards the listener's ears.
The JRX speakers include a device in the tweeter's
crossover to protect it from damage. In the case of
extreme overload, this device will reduce the
power into the tweeter. If the tweeter is
deactivated, please turn down the volume and wait
for a moment. After cooling down, the tweeter
NOTE
protection will reset and the tweeter will return to
normal operation.
FIGURE 6 - WIRING THE SPEAKER/TWEETER
FIGURE 5 - FLUSH MOUNTINGFIGURE 4 - SURFACE MOUNTING
4
SPECIFICATIONS
JRX235 JRX240 JRX246 JRX252
Woofer Diameter 3.5" 4" 4" x 6" 5.25"
Frequency Response 80Hz - 26kHz (-3dB) 60Hz - 26kHz (-3dB) 55Hz - 26kHz (-3dB) 42Hz - 26kHz (-3dB)
Crossover Frequency 4200Hz 4200Hz 3800Hz 3800Hz
Power Handling 35 Watts RMS 45 Watts RMS 50 Watts RMS 60 Watts RMS
Midrange/Tweeter Driver 25mm Tweeter 25mm Tweeter 25mm Tweeter 25mm Tweeter
Sensitivity 88dB (1 watt @ 1 meter) 89dB (1 watt @ 1 meter) 89dB (1 watt @ 1 meter) 90dB (1 watt @ 1 meter)
Mounting Depth 38mm (1.5") 48mm (1.9") 54mm (2.125") 57mm (2.25")
Impedance 4 ohms 4 ohms 4 ohms 4 ohms
Grilles Included? No Yes No Yes
140 Watts Peak 180 Watts Peak 200 Watts Peak 240 Watts Peak
JRX357 JRX365 JRX369 JRX650
Woofer Diameter 5" x 7" / 6" x 8" 6.5" 6" x 9" 6.5"
Frequency Response 36Hz - 30kHz (-3dB) 36Hz - 30kHz (-3dB) 32Hz - 30kHz (-3dB) 34Hz - 30kHz (-3dB)
Crossover Frequency 3800Hz / 5000Hz 3800Hz / 5000Hz 2200Hz / 3800Hz 3800Hz
Power Handling 70 Watts RMS 70 Watts RMS 100 Watts RMS 80 Watts RMS
Midrange/Tweeter Driver 25mm Tweeter 25mm Tweeter 50mm Midrange 25mm Tweeter
Sensitivity 90dB (1 watt @ 1 meter) 90dB (1 watt @ 1 meter) 91dB (1 watt @ 1 meter) 90dB (1 watt @ 1 meter)
280 Watts Peak 280 Watts Peak 400 Watts Peak 320 Watts Peak
19mm SuperTweeter 19mm SuperTweeter 25mm Tweeter
Mounting Depth 57mm (2.25") 57mm (2.25") 84mm (3.3") 60mm (2.35")
Impedance 4 ohms 4 ohms 4 ohms 4 ohms
Grilles Included? No Yes Yes Yes
5
Loading...