Jensen JMV12 User Manual

JMV12

12.1" OVERHEAD LCD MONITOR WITH

DVD PLAYER

OPERATION

MANUAL

128-7667A

Important Notice

An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.

An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle.

Warnings

• Do not use any solvents or cleaning materials when cleaning the video monitor.

• Do not use any abrasive cleaners, they may scratch the screen.

• Use only a lightly dampened lint free cloth to wipe the screen if it is dirty.

• Lock the LCD screen in the fully closed position when not in use.

• Before putting on headphones always adjust the volume setting to the lowest position.

• Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain

the vehicle’s battery.

• Do not put pressure on the screen.

• Caution children to avoid touching or scratching the screen, as it may become dirty or damaged.

Television Reception

This entertainment system is designed primarily for viewing prerecorded movies or playing video games. If this system has the optional TV Tuner (PODTVT2) installed: Television reception in a moving vehicle will be limited and in some areas will not be possible due to weak and variable signal strength. Television viewing in a stationary vehicle will result in an improvement, but may still be marginal due to signal strength. The quality of the picture will not be consistent with home TV reception. Reception may be affected by weather and distance from TV station. A weak signal may cause the picture to roll, be snowy, or cause some color loss

Licensed under one or more of the following patents, Patent NOS. 5,775,762 and 5,927,784

Congratulations on your purchase of the JENSEN JMV12 DVD Player with Drop-Down Video / Monitor. The JMV12 has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment. Please note: Installation options vary, see the individual owner’s manuals for each component in your system to obtain a full understanding of each component’s operation.

Safety Precaution

For safety reasons, when changing video media it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten seat-belts to change video media or make any adjustments to the system. System adjustments can be accomplished using the remote control, while seat-belts remain fastened. Enjoy your JENSEN entertainment system but remember the safety of all passengers remains the number one priority.

FEATURES

• 12.1" TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor

• Built-in DVD Player

* Auto On with Disc insertion

• Selectable (M1 and M2) IR Receive and Transmit Codes

• Multi-Lingual OSD (On Screen Display) for Control of Picture Quality and Functions

• Switchable Channel Infrared Transmitter for use with IR Wireless Headphones

• Four Audio / Video Source Inputs (DVD, AUX/Game, AV1, TV*/AV2)

• Dome Lights with Built-in Three Way Switch

• Built-in Five Frequency Wireless FM Modulator

• Last Position Memory for DVD

• Headphone Jack

• Screen Mode Selection (16:9, 4:3)

• Wireless Game Controller

• Full Function Remote Control

• Backlit Controls

• Day / Night Picture Modes

• AV Output

• Pause To Talk Feature

* Optional TV tuner (P/N PODTVT2)

CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW)

12345678

1. EJECT () Button

This Button is used for ejecting discs from the disc Compartment. (Note: Disc can be ejected with the unit turned Off. Vehicle has to running or in ACC position). After the Disc is removed the unit will turn Off after 15-20 seconds.

FMM

–– ++

ON OFF A UTO

2. STOP (n) Button

This button is used to stop playback.

3. Source Select

Use to select one of the four sources: DVD, AV1, AUX / GAME, AV2 / *TV (Optional).

4. Volume (+)

To increase the volume of wired headphones and increase the level of selected picture controls.

5. Picture Select Button

Allows the user to enter the picture adjustment mode.

6. Volume (–)

To decrease the volume of wired headphones and increase the level of selected picture controls.

7. FMM Source Select Switch

Used to select the frequency in sequence rotation: FM OFF,

88.3MHz, 88.7MHz, 89.1MHz, 89.5MHz or 89.9MHz.

8. PLAY (u) Button

This button is used to start playback of a disc.

CONTROL FUNCTION DESCRIPTION (FRONT VIEW)

9. POWER ( ) Button

Used to turn the system on/off. Bright red when the system is on, dim when off.

10. Dome Lights

Provide additional interior illumination.

11. Infrared Transmitter and Sensor

Use to transmit audio the wireless headphone. Also allows the remote control to operate the JMV12 and to control other accessories in the system.

12. Three Position Dome Light Switch ON – Turns on the dome lights. OFF – The dome lights will not turn on in this position. AUTO – Automatically switches on the dome lights in

conjunction with the vehicle's interior illumination.

13. Ventilation Openings

14. LCD Cut Off Switch

Used to turn off the LCD panel monitor when in the closed position.

15. LCD Panel

16. Screen Release

Press to release the screen.

The JMV12 has an option that allows the user to select from two IR transmit and receive codes (M1 or M2). This feature can be used when using two JMV12s in the same installation or if the vehicle has an RSA (Rear Seat Audio) that uses an “A” channel headset. The JMV12 comes factory set to M1. When in the M1 mode the unit will respond to remote commands when M1 is selected on the remote and will transmit audio on the A channel. When in the M2 mode the unit will respond to remote commands when M2 is selected on the remote and will transmit audio on the B channel.

Note: 2-channel IR headphones will need to be used when monitor is set to M2 mode.

Note:

OSD will appear on the screen for 4~5 seconds

Selecting a Monitor Code (M1 or M2)

1. Press and hold the SOURCE and FMM buttons on the unit

for 3 seconds and the unit will switch from M1 to M2 or M2 to M1.

2. The selected mode (M1 or M2) will be retained in memory until changed by the user.

FMM 88.3MHz

IRT ON

AUX/GAME

FMM OFF

IRT OFF

DVD

CONTROL FUNCTION DESCRIPTION (SIDE VIEW & BACK VIEW)

Side View

1. DVD Disc insertion Slot

For loading and removing discs. Unit will turn On and load disc when disc is inserted.

Note: Disc slot will be lit when unit is turned Off for easy loading at night.

Back View

VIDEO L AUDIO R

1 2 3 4 5

1. Headphone Jack

Allow the use of wired headphones with a 1/8" (3.5mm) plug for listening to the video program audio.

2. Auxiliary Video Input

3. Auxiliary Audio Left Input

4. Auxiliary Audio Right Input

5. PAUSE (;) Button

To Talk

Allows the the front seat passenger to pause the playback. Pressing PAUSE again or pressing the PLAY button will resume normal playback.

REMOTE CONTROL OPERATION

Battery Installation

Before attempting to operate your Remote Control, install the batteries as described below.

1) Turn the Remote Control face down. Using your finger, slide the battery cover off in the direction of the arrow.

2) Install Two “AAA” batteries. Make sure that proper polarity (+ or -) is observed.

3) Align the cover tabs with the remote control and slide the cover until it locks.

The remote control will operate the JMV12. It is not a universal remote control and will not control equipment from other manufacturers.

REMOTE CONTROL FUNCTION DESCRIPTION

POWER

10 11

12 13

19 20

21 22

1 2

3 4

MONITOR SELECT

SOURCE

AUTO

MEMORY

SKIP/

ERASE/

WRITE

CHANNEL

FMM

SELECT

ON/OFF

RETURN DISPLAY

SUBTITLE

TVM2DVD

1 2

NIGHT

ON/OFF

REPEAT

DAY/

584

IRT

VOLUME

EJECT

MUTE

SETUP

ZOOMAUDIO

A-B

PIX

33 32

31 30

* Function control is available on the unit and the remote control. ** The TV Option will only be displayed and the TV control functions are only available if the optional TV Tuner (P/N PODTVT2) is installed.

1. POWER Button*

Press this button to turn the JMV12 ON and OFF.

2. MONITOR SELECT M1 Button – Change the remote control code to enable to control of the JMV12 when set to the M1 mode. M2 Button – Change the remote control code to enable to control of the JMV12 when set to the M2 mode.

3. TV Mode Select Button**

Switches certain function keys on the remote control for TV functions.

4. DVD Mode Select Button

Switches certain function keys on the remote control for DVD functions.

5. SOURCE Button*

Each time the button is pressed, the audio / video source will change in the following sequence: DVD > AUX/GAME > AV1 > AV2/TV**.

6. AUTO MEMORY Button (AUTO PROGRAM Button)**

When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of sufficient levels are automatically stored in memory.

7. SKIP / SEARCH Button**

This button selects between SKIP and SEARCH mode. In "SKIP mode" the TV tuner will tune and stop on channels that are programmed into memory when the CHANNEL UP / DOWN buttons are used. When the SKIP mode is disable, the TV will stop on all active channels.

8. ERASE / WRITE Button**

While tuned to a channel, pressing this button will alternately store or erase the channel from memory.

9. FMM ON / OFF Button*

Turns the wireless FM Modulator on or off.

10. CHANNEL SELECT Button*

Selects the wireless FM Modulator Frequency (Frequency 1: 88.3MHz, Frequency 2: 88.7MHz, Frequency 3: 89.1MHz, Frequency 4:

89.5MHz, Frequency 5: 89.9MHz)

11. RETURN Button

Not used on this model.

12. DISPLAY Button

Press to display the current disc information while the disc is playing. Press the cursor (pqtu) buttons to highlight the desired option. For title and chapter selection use the number buttons to enter the desired title or chapter number. For angle, audio, and subtitle. press the ENTER button repeatedly to change the selected item.

Title Chapter Angle Audio

DVD Title

Chapter Angle 1/1

-/-

Audio Subtitle

1/1

Off

00:00:14

1/1

Ch ENG

5.1 Stop

Subtitle

13. CURSOR / CHANNEL UP DOWN (pqtu) **

Use these buttons to navigate the menu selections on the screen. Use the CHp to increase the channel number and use CHq to decrease the channel number. **

14. OK Button (ENTER)

Used to implement a selected setting or menu option.

15. MENU Button

Allows the user to access the DVD (DVD MODE) root menu and system menu (TV mode).

+ 20 hidden pages