Jensen JMC-326 User Manual

DUAL FRONT LOADING CD SYSTEM WITH

DIGITAL TUNER AND REMOTE CONTROL

MODEL JMC-326

INSTRUCTION MANUAL

Please read this I nstr uc tion Manual completely bef or e

using the unit and retain it for future referenc e

1

SAFETY INSTRUCTIONS

WARNING: TO PREVENT F IRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

THE IMPORTANT SAFETY INSTRUCTIONS SHALL INCLUDE, AS APPLICABLE TO THE
APPLIANCE, ST ATEMENTS T HAT CONVEY TO THE USER T HE INFORMATION IT EMIZED IN
THIS PARAGRAPH:

1. Read instructions - All the safety and operating instructions should be read before the appliance
is operated

2. Retain instructions - The safety and operating instructions should be retained for future
reference.

3. Heed Warnings - All warnings on the appliance and in the operating instructions should be
adhered to.

4. Follow instructions - All operation and use instructions should be followed.

5. Water and Moisture - The appliance should not be used near water; for example, near a
bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and
the like.

6. Carts and Stands - The appliance should be used only with a cart or stand
that is recommended by the manufacturer.

An appliance and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.

7. Wall and Ceiling Mounting - The appliance should be mounted to a wall or
ceiling only as recommended by the manufacturer.

8. Ventilation - The appliance should be situated so that its location or position does not interfere
with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug,
or similar surface that may block the ventilation openings; or placed in a built-in installation, such
as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9. Heat - The appliance should be situated away from heat sources such as radiators, heat
registers, stoves or other appliances (including amplifiers) that produce heat.

10. Power Sources - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.

11. Grounding or Polarization - Precautions should be taken so that the grounding or polarization
means of an appliance is not defeated.

12. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles and the point where they exit from the appliance.

2

13. Protective Attachment Plug - The appliance is equipped with an attachment plug having
overload protection. This is a safety feature. See Instruction Manual for replacement or resetting
of protective device. If replacement of the plug is required, be sure the service technician has
used a replacement plug specified by the manufacturer that has the same overload protection as
the original plug.

14. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.

15. Power Lines - An outdoor antenna should be located away from power lines.

16. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the
antenna system is grounded so as to provide some protection against voltage surges and built
up static charges. Section 810 of the National Electrical Code, ANSI/ NFPA No.70-1984,
provides information with respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode. See figure 1.

17. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when
left unused for a long period of time.

18. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not
spilled into the enclosure through openings.

19. Damage Requiring Service - The appliance should be serviced by qualified service personnel
when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked change in

performance; or

E. The appliance has been dropped, or the enclosure damaged.

20. Servicing - The user should not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to qualified service personnel.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

3

CAUTION

Follow the advice below for safe operations.

ON PROTECTION AGAINST LASER ENERGY EXPOSURE

• As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to
disassemble the casing.

• Stop operation immediately if any liquid or solid object should fall into the cabinet.

• Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not

operate properly.

• Do not put anything in the safety slot. If you do, the laser diode will be ON when the CD door is
still open.

• If the unit is not to be used for a long period of time, make sure that all power sources are
disconnected from the unit. Unplug the AC adaptor from the wall outlet. Make it a practice to
remove the AC cord by grasping the main body and not by pulling the cord.

• This unit employs a laser. The use of controls or adjustment or performance of procedures other
than those specified here may result in exposure to hazardous radiation.

ON PLACEMENT

• Do not use the unit in places which are extremely hot, cold, dusty or humid.

• Place the unit on a flat and even surface.

• Do not restrict the air-flow of the unit by placing it in a place with poor ventilation, by covering it

with a cloth or by placing it on a carpet.

ON CONDENSATION

• When left in a heated room where it is warm and damp, water droplets or condensation may form
inside the unit.

• When there is condensation inside the unit, the unit may not function normally.

• Let it stands for 1 to 2 hours before turning the power on, or gradually heat the room up and dry

the unit before use.

Should any trouble occurs, remove the power source and refer servicing to qualified personnel.

4

MAIN UNIT

1. SNOOZE

FUNCTIONS AND CONTROLS

10. SKIP DOWN

PLAY/PAUSE

2.

3.

4. / BAND (CD STOP/AM-FM)

5. LCD DISPLAY 14. ALARM ON/OFF

6. VOLUME - 15. ALARM MODE

7. REPEAT/PRESET 16. PROGRAM / SET

8. VOLUME + 17. AUX IN

9. POWER

SKIP UP 12. FUNCTION (FM-CD1-CD2-AUX IN)

11. SENSOR

13. SLEEP