Jensen JCR-225 User Manual

Dual Alarm Projection Clock Radio

REFERENCE.

USER MANUAL
JCR-225

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE

OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE
INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

HAZARD, DO

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

The Caution Marking is located at the bottom of the apparatus.
The Rating plate is located at the bottom of the apparatus

FULLY

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that product heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.

E-1

13. Unplug this apparatus during lightning storms or when unused for a long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.

15. This appliance shall not be exposed to dripping or splashing water and that no object
filled with liquids such as vases shall be placed on the apparatus.

16. Do not overload wall outlet. Use only power source as indicated.

17. Use replacement part as specified by the manufacturer.

18. Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks.

19. Power Sources - This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operating instruction.

20. Object and Liquid Entry - Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on the product.

21. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:

a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions. Adjust

only those controls that are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will often require extensive work

by a qualified technician to restore the product to its normal operation.
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a need for

service.

22. Main plug is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the mains completely, the mains
plug should be disconnected from the mains socket outlet completely.

23. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

24. Excessive sound pressure from earphones and headphone can cause hearing loss.

This symbol indicates that this product incorporates
between hazardous mains voltage and
par

ts.

user

accessible

doub

le

insulation

CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF AC PLUG TO WIDE SLOT. FULLY INSERT.

SAVE THESE INSTRUCTIONS

E-2

COMPLIANCE WITH FCC REGULATIONS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may

cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B Digital
Device, pursuant to Part
reasonable protection against harmful
equipment generates uses and can radiate radio frequency energy

15 of the FCC Rules. These limits are designed to provide

interference in a residential installation. This

and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning
to correct the interference by one or more of the

the equipment off and on, the user is encouraged to try

following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

WARNING

Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

PROTECT YOUR FURNITURE!!

This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving
when
specially
types of oil based
the rubber ‘feet’ to soften, and

you

operate the controls. These ‘feet’ are made from non-migrating rubber material

formulated

to avoid leaving any marks or stains on your furniture. However certain

furniture

polishes, wood preservatives, or cleaning sprays may cause

leave

marks or a rubber residue on the

furniture.
To prevent any damage to your furniture we strongly recommend tha t you purchase small
self-

adhesive felt pads, available at hardware stores and home improvement centers
everywhere, and apply these pads to the bottom of the rubber ‘feet’ before you place the
product on fine

wooden furniture.

E-3

DEAR JENSEN® CUSTOMER

Selecting fine audio equipment such as the unit you've just purchased is only the start of
your
excitement
Association's
by playing it at a safe level.
annoying blaring or distortion and,
hearing. Sound can be deceiving. Over time
volumes of sound. So what sounds "normal" can
hearing. Guard against this by setting your equipment at a safe
hearing

musical enjoyment. Now it's time to consider how you can maximize the fun and

your

equipment offers. This manufacturer and t h e E l e ct r o n i c Industries

adapts.

Consumer

Electronics Group want you to get the most out of your equipment

One

that lets the sound come through loud and clear without

most

importantly, without affecting your sensitive

your

hearing "comfort level" adapts to higher

actually

be loud and harmful to your

level

BEFORE your

To

establish

• Start your volume control at a low

a safe level:

setting.

• Slowly increase the sound until you can hear it comfortably and clearly, and without

distortion.

Once you have

Set the dial and leave it
hearing damage or loss in the future.

established a comfortable sound level:

there.

Taking a minute to does this now will help to prevent

After

all, we want you listening for a

lifetime.

We Want You

Used wisely, your new sound equipment will provide a lifetime
fun and enjoyment. Since hearing damage from loud noise is
often undetectable until it is too late, this manufacturer and
Electronic Industries Association's Consumer Electronics Group
recommend you avoid prolonged exposure to excessive

Customer's Record:

Listening

For a Lifetim

e

of

the

noise.

The serial number of this product is found on its bottom cover. You should note the serial
number
identification

of this unit in the space provided as a permanent record of your purchase to aid in

in the

event of theft of

loss.

Model Number : JCR-225 Serial Number :

E-4