Applications:
c
Live sound reinforcement, speech and vocals,
music playback in entertainment, A/V, and
institutional venues – especially when ease of
use and portability are important factors.
c
Amplification, mixing, and monitoring for
electronic musical instruments.
c
Everywhere you need to be heard.
Features:
c
280 watt High-Performance Powered Speaker
System
c
Ultra Light Weight and Extremely Compact
c
Soft touch top grip for easy handling.
c
10" Differential Drive®low-frequency driver
with neodymium magnet for low-distortion
and light weight
c
1" throat diameter next generation JBL
neodymium compression driver
c
Efficient Class-D digital amplifier technology
c
Built-in 3 Channel Mixer
c
100° H x 60° V asymmetrical waveguide for
uniform audience coverage
c
Line level and direct microphone input
capability
c
Selectable Pre-engineered EQ settings
c
Unique Mix/Loop signal flow function for
extended system application
c
Easy “daisy-chain” connections for extending
the system
c
Integrated M10 suspension points for easy
rigging
c
Multi angle enclosure for main or monitor
applications
c
Integrated 36 mm pole mount socket with
stabilizing securing screw
c
Highly designed composite enclosures for
durability, lightweight, and acoustic
performance
The EON510 is a 10-inch, two-way, powered,
portable speaker system. Capable of reproducing
full bandwidth sound at high levels it offers the
additional utility of a 3 channel built-in mixer.
The EON510 is comprised of a 254 mm (10 in)
Differential Drive®woofer, a 25.4 mm (1 in)
neodymium high frequency compression driver
coupled to a 100° H by 60° V waveguide. Both
components are driven by the discrete channels
of a 280 watt Class-D integrated power amplifier.
The input section contains all cross-over
functions, protection, and mixer functionality.
The mixer offers XLR or ¼-inch TRS phone
jack compatibility. Selectable input sensitivities
allow a broad range of devices to be properly
matched. A unique mix/loop signal flow router
provides opportunities for daisy chaining or
gigging with the built-in mixer only. Preengineered system EQs allow for matching the
settings to the actual source material. In the
“cut” position maximum level can be achieved
for speech reproduction by reducing need to
reinforce the lower frequencies. This is also a
typical setting when using the system as a floor
monitor, reducing low frequency build-up which
occurs naturally when placed on a floor. The
“flat” setting is ideal for live music and the
“boost” for reproducing low level pre-recorded
music, delivering extra low and high frequency
energy. The signal present and limit lights
indicate performance status. An additional
switch is provided to defeat the illuminated logo
In addition to acoustic performance the EON510 features a top handle grip with non-slip
rubber over-molding, ultra light weight, and balanced ergonomics. The new generation of EON
products offers true portability and ease of handling. Four standard M10 rigging points and
integrated pole mount socket increase the system’s utility. The extremely rugged copolymer
enclosure has been designed for main and 45° monitor orientation in the left and right hand
configuration. A full screen-backed steel grille offers additional protection for both the woofer and
compression driver components.
Specifications:
System Type: Self powered 10", two-way, bass-reflex design
Frequency Range (-10 dB): 58 Hz - 18.5 kHz (EQ in ‘Flat’ position)
Frequency Response (±3 dB): 70 Hz - 17 kHz (EQ in ‘Flat’ position)
Coverage Pattern: 100° H x 60° V nominal
Directivity Index (DI): 9 dB
Directivity Factor (Q): 8
Crossover Frequency: 1.8 kHz
System Power Rating: 280 W continuous, 560 W peak
LF Power amp: 220 W continuous at driver impedance
HF Power amp: 60 W continuous at driver impedance
Distortion: Less than 0.1% at rated power
Maximum SPL: 121 dB
Signal indicators: Limit: Red LED indicates input overload condition
Signal: Green LED indicates signal present
Mic/Line: Red LED indicator
Input Gain (input 3): Mic position: -Infinity to +40 dB
Line position: -Infinity to +4 dB (+20 dBu Max signal input)
Input Gain (input 1 & 2): -Infinity to +4 dB (+20 dBu Max signal input)
Input Impedance: 64 K Ohms (balanced), 32 K Ohms (unbalanced)
Boost EQ: LF +3 dB Shelving Filter @ 150 Hz
HF +2.5 dB Shelving Filter @ 4 kHz
Low Cut Filter: Preset high pass @ 120 Hz
LF Driver: 1 x JBL 261F 254 mm (10 in) Differential Drive®integrated woofer
with dual 1.5” voice coils.
HF Driver: 1 x JBL 2414H-1 25.4 mm (1 in) neodymium compression driver
Input 3 connector: Balanced XLR / ¼ inch TRS combo jack with XLR loop through,
Input 1 & 2 connector: ¼ inch TRS jack
Output (Loop/Mix switch): Balanced male XLR, +20 dBu (peak) o/p level in MIX position
XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)
Limiting/Protection: Dynamic Limiter
Enclosure: PP impact copolymer, multi-purpose main & monitor orientation.
Handles: One on top with rubber grip
Suspension / Mounting: 36 mm pole socket with stabilizing screw, 3 x M10 suspension
points, 1 x M10 pull-back point
Grille: Powder coated perforated steel with acoustically transparent
black screen backing.
AC input: 120 – 240 V, 50/60 Hz
Dimensions (H x W x D): 490 mm x 313 mm x 262 mm (19.3 in x 12.3 in x 10.3 in)
Net Weight: 7.7 kg (17 lb)
JBL continually engages in re s e a rch related to product improvement. Some materials, production methods and design
re finements are introduced into existing products without notice as a routine expression of that philosophy. For this
reason, any current JBL product may differ in some respect from its published description, but will always equal or
Portable Self-Powered 10",
Two-Way, Bass-Reflex Design
Professional Series
E O N 5 1 0