Janome AcuFil Tips And Tricks Manual

AcuFil Tips

AcuFil Allover Stippling

Perfect stippling is easily achieved with AcuFil.

1. Measure the area to be stippled. It is a good idea to not include the bor­ders so there is enough fabric available to fi t in the hoop while quilting. The
borders can be quilted separately with a continuous look design created with
the AcuFil Tool or with built in decorative stitches.

2. Open AcuFil tool and select AcuFil Multiple Design Layout.

3. Enter the measurement of the quilting area into the pop up window and
then click OK.

4. The layout will appear. Click Next.

5. The stippling design has automatically been sized to fi t the quilt.

6. To Save the design click File > Save As. Navigate to your favorite folder,
name and then save the design. The AcuFil Tool automatically saves all
designs in the native format for the MC12000, *.jpx. This will allow you to
reopen and reedit the design as needed for future quilts.

7. Click Write to send the design to the machine or USB fl ash drive.

Templates

Perfect Placement is easy to achieve using Jenny Haskins Template
Magic a reusable self-adhesive paper ideal for printing templates
with an inkjet printer.

1. After calculating the AcuFil design, click File and then Print Pre­view. AcuFil Tool will automatically print a full size template as well
as a layout guide.

AcuFil Tips

2. Print page 1 on Jenny Haskins
Template Magic.

3. Cut the template out close to
the edges of the design, peel off
the backing, and then stick the
template in place.

4. Place the quilt in the ASQ22
hoop. Remove the printed tem­plate and quilt the fi rst design.

5. Repeat the process for the rest
of the area to be quilted.