Jamo DVR-50 Owners manual

DVD Receiver DVR 50
4
Contents
Introduction 5 Quick Setup 9 Advanced Setup 11 Receiver 13 DVDs and Other Media 14 Advanced Functions 15 Radio 16 Support 17 Appendix 19
Congratulations on your new Jamo DVR 50 Receiver
The many different functions provided by your new DVD receiver will be a source of pleasure for you for many years to come. Naturally, you can play and watch DVD films with superb audio and visual quality. You can watch films in many other formats than DVD, such as MPEG-4, XviD, DivX. The audio features also give you the option of playing music CDs, MP3 or Ogg Vorbis files. The DVR 50 auto­matically recognises each format and can read CD-RW and DVD-RW alike. Your new DVR 50 also supports Picture CDs (jpg), which means that you can display your photos directly on the TV screen. This includes pic­tures developed at the photo shop and any photos you have scanned and saved to a CD yourself.
Note: Do not use the DVD Receiver until you have studied the quick setup menu. To do so, the DVD Receiver must be connected to a TV set.
english
5
1
Introduction
Make sure the following accessories are included with your DVD Receiver.
DVD-Receiver Jamo DVR 50
Power Cable
Batteries
for the remote control (size “AAA” R6P)
Remote control
S-Video
Not provided in Europe
Composite Video
FM Antenna
SCART
Provided in Europe only
Audio Cable AM Antenna
Connecting
Refer to the illustration below to connect speakers, subwoofer and antennas. To fit the DVR 50 into your current video system, refer to the three configuration examples. Choose from one of them or make your own combination.
6
Speakers
Extra accessories
Subwoofer
Extra accessory
Jamo DVR 50
FM Antenna
AM Antenna
Power Cable
Back panel
Detailed overview of the back panel
1
2
3
4
5 7
6
8 9 10
11
12 13
14
151617
18
19
20
1. FM antenna
2. AM antenna
3. SCART connector
4. Component video output
5. Composite video output
6. S-Video output
7. Analog audio output
8. TV analog input
9. Video analog input
10. Auxiliary analog input 11 . Subwoofer output
12. Optical audio input
13. Coaxial audio input
14. Optical audio output
15. Surround speaker centre out
16. Surround speaker right out
17. Surround speaker left out
18. Right speaker out
19. Left speaker out
20. AC input
7
SCART video configuration
Both audio and video is connected through the SCART lead. If a Satellite receiver or set top box has digital audio output (here optical), you can con­nect to it directly.
S-Video configuration
Video is connected through the S-Video connectors (or composite video connectors) to the TV. Audio is also connected through the TV to the DVD receiver. If a Satellite receiver or set top box has digital audio output (here coaxial), you can connect it directly
Component video configuration
Video is connected to the monitor, and audio is connected to the DVD receiver
VCR
SAT/STB
VCR
SAT/STB
VCR
SAT/STB/HDTV/PC
TV
TV
Monitor/
Plasma TV
Jamo DVR 50
Jamo DVR 50
Jamo DVR 50
Quick Setup
Video output must be set to SCART
Advanced setup - audio
TV input must be set to SCART Video input must be set to optical
Quick Setup
Video output must be set to S-Video
Advanced setup - audio
TV input must be set to Analog Video input must be set to coaxial
Quick Setup
Video output must be set to component video
Advanced setup - audio
TV input must be set to analog or if digital audio to coaxial/optical Video input must be set to analog
1
2 3
1
2 3
1
2
3
1
2
3
1
2
3
1
2
3
2
8
Overview
Front Panel
The front panel has the standard buttons listed below. When the disk tray is open, push the end of the tray to close it.
1. Standby
2. Source select
3. Volume up
4. Volume down
5. Previous (Arrow down in menus)
6. Next (Arrow up in menus)
7. Play/pause (Enter in menus)
8. Load (Eject)
Display
The DVD Receiver is equipped with a VFD display which indicates the current ongoing activities.
1. Indicates the selection of the disk being played
2. Indicates the track, chapter or program being played
3. Indicates the status on the source or the media playing
4. Indicates the type of media being played
Remote
The receiver is delivered with a standard remote control. All the player’s functions can be performed from it.
1. Standby
2. DVD Selector
3. Radio Selector
4. Video or Auxiliary Selector
5. TV Selector
6. Up Arrow
7. Left Arrow/Rewind
8. Play/Pause/Enter
9. Right Arrow/Fast Forward
10. Down Arrow 11 . Previous Track/Chapter/Program
12. Stop
13. Next Track/Chapter/Program
14. Menu
15. List
16. Setup
17. Info
18. Mute
19. Sound Mode
20. Load/Eject
21.Volume -
22. Volume +
Note: Certain functions will only work if sup­ported by the media.
Putting the batteries in the remote
1
2 3
4 5
6 7 8
1 2
3
4
1
2 3 4 5
6
7
8
9
10
11 13
12
14
16
15
17
20
18 19
21
22
Loading...
+ 11 hidden pages