Jabra GO 6470, GO 6450 Quick Start Manual

81-02862 A

Jabra GO 6470 and 6450

www.jabra.com

Quick start guide

© 2008 GN Netcom A/S. All rights reserved. Jabra® is a registered
trademark of GN Netcom A/S. All other trademarks included
herein are the property of their respective owners. The Bluetooth

®

word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by GN Netcom A/S is under license. (Design
and specifications subject to change without notice).

www.jabra.com

NEED MORE HELP?

EUROPE

Belgique/Belgie 00800 722 52272
Danmark 702 52272
Deutschland 0800 1826756
Die Schweiz 00800 722 52272
España 900 984572
France 0800 900325
Italia 800 786532
Luxembourg 00800 722 52272
Nederland 0800 0223039
Norge 800 61272
Österreich 00800 722 52272
Portugal 00800 722 52272
Suomi 00800 722 52272
Sverige 020792522
United Kingdom 0800 0327026
Polska 0801 800 550
Россия [phone]
International 00800 722 52272

EMAIL ADDRESSES

Deutsch [e-mail]
English [e-mail]
Français [e-mail]
Italiano [e-mail]
Nederlands [e-mail]
Español [e-mail]
Scandinavian [e-mail]
Россия [e-mail]
Polska [e-mail]

RegisteR youR JabRa at JabRa.com/myJabRa – foR news, suppoRt and competitions

See www.jabra.com for full user manual or contact your local customer service
department. TOLL FREE Customer Contact Details:

Jabra GO Headset diaGram

7

5

6

4

1

2

3

Figure 1:

Jabra GO base diaGram

8

10

11

12

13

15

9

14

16

Figure 2:

10 Telephone port

11Handset port

17 AUX port

18 USB port

19 Power adapter port

UK

Jabra GO Headset diaGram

1 Multifunction button (answer/end call, among

other functions)

2 Touch panel for volume and mute control

3 Dual noise-blackout microphone

4 Activity and status indicator (multicolor LED)

5 Earbud (with speaker)

6 Mount for ear-hook wearing-style attachment

7 Recharge contact

Figure 1: Jabra GO headset as seen from the outer and
inner sides, respectively

Jabra GO base diaGram

8 Headset cradle

9 Touchscreen

10 Telephone port

11 Handset port

12 AUX port

13 USB port

14 Power adapter port

15 Security slot and (recessed)
cradle-release button

16 Speaker for ring tones and
touchscreen audio feedback

Figure 2: Jabra GO base, seen from the front and back,
respectively

This guide will help you assemble your headset and launch the built-in setup wizard, which will guide you
through all of the required connections and settings. Basic headset operation is also introduced here. See the
full user manual on the supplied CD-ROM for complete details about how to use the Jabra GO 6470 and 6450.

UK

installatiOn and setUp

1. Assemble the headset into a wearing style by doing
one of following:

- If you will use the headband, then press the
headset into the headband as shown below. Once
assembled, you can rotate the headset for use on
either ear.

- If you will use the ear hook, then press the pin of
the ear-hook attachment down into the hinge as
shown below. To wear on your left hear, pres the
pin into the opposite end of the hinge.

2. Connect the power supply to the power port [14]
(marked with

) on the base and then plug it

into a wall outlet.

3. A setup wizard automatically launches on the
touchscreen [9]. Follow the on-screen instructions
to assemble and configure your headset solution.
Make selections by touching the screen icons
to progress through the wizard. Completing the

wizard will take about 10 minutes.

3 sec.

4. Insert the CD-ROM included with your headset
into your PC and run the setup program there. This
will install utility software and drivers for working
with your headset and will also install the full user
manual for the solution (in PDF format).

If you have any questions as your work through the
setup wizard, or if you would like more information
about how to use the many advanced features of
your headset solution, please refer to the user manual
installed on your PC.