IXYS MCD56-14IO8, MCD56-16IO1, MCD56-08IO8, MCD56-12IO1, MCD56-12IO8 Datasheet

MCC 56 MDC 56 MCD 56

Thyristor Modules

Thyristor/Diode Modules

VRSM	VRRM		Type
VDSM	VDRM
V	V		Version 1		Version 8
900	800		MCC 56-08io1 B	MCD 56-08io1 B	MCC 56-08io8 B	MCD 56-08io8 B
1300	1200		MCC 56-12io1 B	MCD 56-12io1 B	MCC 56-12io8 B	MCD 56-12io8 B
1500	1400		MCC 56-14io1 B	--	MCC 56-14io8 B	MCD 56-14io8 B
1700	1600		MCC 56-16io1 B	MCD 56-16io1 B	MCC 56-16io8 B	MCD 56-16io8 B
1900	1800		MCC 56-18io1 B	--	MCC 56-18io8 B	MCD 56-18io8 B
1500	1400		MCC 56-14io1
1700	1600		MCC 56-16io1
700	600		MDC 56-06io1 B

Symbol	Test Conditions						Maximum Ratings
ITRMS, IFRMS	TVJ = TVJM						100	A
ITAVM, IFAVM	TC = 83°C; 180° sine						64	A
	TC = 85°C; 180° sine						60	A
ITSM, IFSM	TVJ = 45°C;					t = 10 ms (50 Hz), sine	1500	A
	VR = 0					t = 8.3 ms (60 Hz), sine	1600	A
	TVJ = TVJM					t = 10 ms (50 Hz), sine	1350	A
	VR = 0					t = 8.3 ms (60 Hz), sine	1450	A
òi2dt	TVJ = 45°C					t = 10 ms (50 Hz), sine	11 200	A2s
	V	R	= 0			t = 8.3 ms (60 Hz), sine	10 750	A2s
	T	VJ	= T	VJM		t = 10 ms (50 Hz), sine	9100	A2s
	V	R	= 0			t = 8.3 ms (60 Hz), sine	8830	A2s
(di/dt)cr	TVJ = TVJM					repetitive, IT = 150 A	150	A/ms
	f	=50 Hz, tP =200 ms
	VD = 2/3 VDRM
								A/ms
	IG = 0.45 A					non repetitive, IT = ITAVM	500
	diG/dt = 0.45 A/ms
(dv/dt)cr	TVJ = TVJM;					VDR = 2/3 VDRM	1000	V/ms
	RGK = ¥; method 1 (linear voltage rise)
PGM	TVJ = TVJM					tP = 30 ms	10	W
	IT = ITAVM					tP = 300 ms	5	W
PGAV							0.5	W
VRGM							10	V
TVJ							-40...+125	°C
TVJM							125	°C
Tstg							-40...+125	°C
VISOL	50/60 Hz, RMS					t = 1 min	3000	V~
	IISOL £ 1 mA					t = 1 s	3600	V~
Md	Mounting torque				(M5)		2.5-4.0/22-35 Nm/lb.in.
	Terminal connection torque (M5)						2.5-4.0/22-35 Nm/lb.in.
Weight	Typical including screws						90	g

Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions

ITRMS = 2x 100 A

ITAVM = 2x 64 A

VRRM = 800-1800 V

TO-240 AA	3	6 7
2		4
1		5

3		6 7							1			5 4 2

MCC

Version 1

3														1									5			4 2

MCD

Version 1

3						6			1						5				2

MCC

Version 8

3														1									5						2

MCD
Version 8
3	6 7	1	2
MDC
Version 1

Features

●International standard package, JEDEC TO-240 AA

●Direct copper bonded Al2O3 -ceramic base plate

●Planar passivated chips

●Isolation voltage 3600 V~

●UL registered, E 72873

●Gate-cathode twin pins for version 1B

Applications

●DC motor control

●Softstart AC motor controller

●Light, heat and temperature control

Advantages

●Space and weight savings

●Simple mounting with two screws

●Improved temperature and power cycling

●Reduced protection circuits

031

© 2000 IXYS All rights reserved

1 - 4

MCC 56 MDC 56 MCD 56

Symbol	Test Conditions		Characteristic Values
IRRM, IDRM	TVJ = TVJM; VR = VRRM; VD = VDRM			5	mA
VT, VF	IT, IF = 200 A; TVJ = 25°C			1.57	V
VT0	For power-loss calculations only (TVJ = 125°C)			0.85	V
rT				3.7	mW
VGT	VD = 6 V;	TVJ = 25°C		1.5	V
		TVJ = -40°C		1.6	V
IGT	VD = 6 V;	TVJ = 25°C		100	mA
		TVJ = -40°C		200	mA
VGD	TVJ = TVJM;	VD = 2/3 VDRM		0.2	V
IGD				10	mA
IL	TVJ = 25°C; tP = 10 ms; VD = 6 V			450	mA
	IG = 0.45 A; diG/dt = 0.45 A/ms
IH	TVJ = 25°C; VD = 6 V; RGK = ¥			200	mA
tgd	TVJ = 25°C; VD = 1/2 VDRM			2	ms
	IG = 0.45 A; diG/dt = 0.45 A/ms
tq	TVJ = TVJM; IT = 150 A, tP = 200 ms; -di/dt = 10 A/ms typ.			150	ms
	VR = 100 V; dv/dt = 20 V/ms; VD = 2/3 VDRM
QS	TVJ = TVJM; IT, IF = 50 A, -di/dt = 3 A/ms			100	mC
IRM				24	A
RthJC	per thyristor/diode; DC current		other values	0.45	K/W
	per module			0.225	K/W
RthJK	per thyristor/diode; DC current		see Fig. 8/9	0.65	K/W
	per module			0.325	K/W
dS	Creepage distance on surface			12.7	mm
dA	Strike distance through air			9.6	mm
a	Maximum allowable acceleration			50	m/s2

Optional accessories for module-type MCC 56 version 1 B

Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red

Type ZY 200L	(L = Left for pin pair 4/5)	UL 758, style 1385,
Type ZY 200R	(R = right for pin pair 6/7)	CSA class 5851, guide 460-1-1

Dimensions in mm (1 mm = 0.0394")

MCC / MCD / MDC Version 1 B

MCC Version 8 B

Version 1 or 8 without B in typ designation = without insert in mountig holes

10
	1: IGT, TVJ = 125°C
V	2: IGT, TVJ =	25°C
VG	3: IGT, TVJ = -40°C
		2	3		6
1				5
	1		4
			4: PGAV = 0.5 W
	IGD, TVJ = 125°C		5: PGM =	5 W
			6: PGM = 10 W
0.1				mA 104
100	101	102	103
			IG
Fig. 1	Gate trigger characteristics

	1000
			TVJ = 25°C
	s
	tgd
	typ.	Limit
	100
	10
	1		mA
	10	100		1000
			IG

Fig. 2 Gate trigger delay time

MCD Version 8 B

© 2000 IXYS All rights reserved

2 - 4