iRobot R3MOD24A Users Manual

Rhein Tech Laboratories, Inc. Client: iRobot Corporation
360 Herndon Parkway Model: 2.4 GHz Module
Suite 1400 Standards: FCC 15.247 & RSS-210

http://www.rheintech.com

Report #: 2007155

FCC/IC ID: UFE-R3MOD24A/6652A-R3MOD24A Herndon, VA 20170

Appendix I: Manual

Please refer to the following page.

Page 38 of 42

2.4 GHZ Module User Manual Compliance Language

As a condition of using this module, and in addition to the requi
the following:

Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s a

Only the antenna with which an intentional radiator is authorized may be used with the intentional

radiator.

and to incl

uthority to operate the equipment.

ude the preceding statements in their installation manual where the consumer will obse rve the m .

ments above, the manufacturer further agree to

re

2.4 GHz Module Labeling Requirements

The 2.4 GHz Module is to be installed in a product without alteration to provide a wireless link. During
installation, do not remove the FCC ID information on the module. The product that makes use of this module
must display the following text on the product, and in the installation manual, where it will be visible and readable
by the consumer:

Contains FCC ID: UFE-R3MOD24A IC: 6652A-R3MOD24A
This device complies with Part 15 of the FCC Rules.

Operat

1. This device may not cause harmful interference, and

2. This device must accept any interference received,

including interferenc

ion is subject to the following two conditions:

e that may cause undesired operation.