Connecting the FotoShow™Image Center to a TV
1. Read the User’s Manual
for more complete
instructions
3. Connect the RCA cable
to your FotoShow
™
Image Center
4. Connect the RCA cable
to the video input on your
TV or VCR
5. Connect the power
adapter to your
FotoShow
™
Image Center
6. Plug the power adapter
into an outlet
or power strip
7. Press the POWER button
on the FotoShow
™
Remote Control
8. Turn on the TV and set
it to the correct
video input
10. View the FotoShow
™
demo. Start using your
FotoShow
™
Image Center
11. Read the User’s
Manual
if you have any questions
VIDEO 1/AUX
2. Put batteries in the
FotoShow™remote control
9. Insert the included Zip
®
disk into the
FotoShow™Image Center
See other side for additional instructions
TM
Digital Image Center
®
POWER
TM
®
Connecting the FotoShow™Zip®Drive to a Computer
1. Install the IomegaWare
™
software
2. Read the USB
Guidelines
(on the back cover
of the printed User’s Manual)
4. Connect the USB cable
to your FotoShow
™
Zip®drive
3. Connect the USB cable
to your computer
5. Connect the power
adapter to your
FotoShow
™
Zip®drive
6. Plug the power adapter
into an outlet
or power strip
7. The eject button will
flash momentarily
8. Insert the Zip®disk that
came with your
FotoShow
™
Zip®drive
9. View the User’s Manual
(on the included Zip® disk),
if you have any questions
Copyright © 2000 Iomega Corporation. Iomega, the stylized “i” logo, IomegaWare, FotoShow, and Zip are
either registered trademarks or trademarks of Iomega Corporation in the United States and/or other countries.
PictureIQ is a trademark of PictureIQ Corporation.
30398000 09/01/00 F
See other side for additional instructions
TM
Digital Image Center
®
TM
®
TM
®
Loading...