Invacare Spree XT User Manual
Spree XT Wheelchair
S
pree embodies the essence of the child in all of us. We all love to laugh, explore the world and meet new people. The
Spree series of wheelchairs can help. They make life easier for parent and child alike, enabling them to enjoy life to the
fullest. This is the Essence of Spree!
Invacare®Spree XT – The Easy Tilt
• Easy to lift and maneuver – lightest-in-class.
•
Easy to tilt – optimal pivot position.
• Easy to transport – TRRO system.
• Easy to adjust – Quick Set™washers.
Invacare®Spree XT Wheelchair
Seat width 10 - 18"
Seat depth 12 - 20"
Overall chair width open Seat width plus 7.5" (12, 20-inch wheels) Seat width plus 8.75" (22, 24-inch wheels)
Overall chair depth min. 29.5" (without anti-tips and front rigging)
Overall chair height range 36.5" - 44"
Back angle adjustment 86˚ to 106˚
Tubing outside diameter 1"
Tilt range 0˚ - 45˚
Weight of chair 29 lb.*
Weight capacity 150 lb.
Warranty Limited lifetime on frames and crossbraces
*16" x 16" Spree XT with AT902 casters, 12" composite wheels with 12" pneumatic tires, 90˚ swingaway front rigging, AT5543 adjustable angle flip up footplates, anti-tippers,
no arms, no wheel locks, no stroller handles, no seating system, no other accessories/options.
Seat-to-floor heights
Rear wheel size 3" caster 4" caster 5" caster 6" caster 6" x 2" caster
12" 16", 16.5", 15.5", 16", 16", 16.5", 17", 17.5" 17.5"
17" 16.5", 17" 17", 17.5"
20" – – 17.5" 17.5", 18", 17.5", 19"
18.5"
22" 16.5", 17" 16.5", 17" 16.5", 17", 17", 17.5", 17.5"
17.5" 18"
24" – – 17.5" 17.5", 18", 17.5", 19"
18.5"
Knee-to-heel*
Front rigging type Min Max
60˚ 13.5" 17.5"
60˚ MFX 9" 12.5"
70˚ 13.5" 16.5"
70˚ tapered 12.75" 16.25"
70˚ MFX 5.75" 11.75"
90˚ 4.5" 7.5"
Elevating 14" 20"
*Footplate height adjusts in 1" increments. Measurement taken from top of seat rail to back of footrests.
Arm heights*
Cantilever
Non-locking 6" - 9"
Locking 9" - 12"
T-Arms
Low Range 8" - 12"
High Range 10" - 16"
*All measurements taken from the top of seat rail to top of armrest pad.
ANSI/RESNA W/C19 sec 6.2 Presale Literature Notification
A. Minimum turning radius 23.06".
Minimum turn-around width 35" (14"W x 14"D chair without footrests).
B. Spree XT wheelchairs 17"D or deeper may be longer than 1220 mm exceeding the ADA definition of a common wheelchair
and the minimum length requirement of lifts on public vehicles, and may therefore present particular difficulties accessing
some vehicles.
C. Total wheelchair mass = 30.25 lb (13.75 kg) - including front rigging, anti-tips, TRRO brackets.
Does not include wheel locks, wheelchair anchored pelvic belt and seating.
D. Average lateral dummy displacement = approximately .8125" (21.5 mm)
E. Overall score = 17
Overall rating = A
Measures how well a wheelchair can accommodate a vehicle-anchored seat belt system. The wheelchair is scored on
sharp edges in path of seat belt, how close the belt is to occupant and what objects get in the way of the belt.
F. i . The Spree XT tested was sized to accommodate a 170 lb. test dummy. 16"W x 18"D, 60˚ front rigging, 12" composite
wheels, 12" pneumatic flat free tires, Invacare
®
KSS seating system, 8" composite/pneumatic flat free casters)
ii. The Spree XT tested was tied down using four tie-down brackets - 2 brackets located near head tubes and 2 brackets
located near the back cane mounting brackets.
iii.The Spree XT tested was sized to accommodate a 170 lb. test dummy. 16"W x 18"D, 60˚ front rigging, 12" composite
wheels, 12" pneumatic flat free tires, Invacare KSS seating system, 8" composite/pneumatic flat-free casters. Mass in
section C above.
iv.The Spree XT tested used a wheelchair anchored pelvic belt and vehicle anchored shoulder belt for testing.
v. The Spree XT tested complies with the performance requirements of ANSI/RESNA WC-19 sec 5.3.
G. For all types of vehicles, the Spree XT requires four SAE J2249-compliant tie down strap assemblies for effective securement.
H. When the TRRO or TRBKTS option is selected, the Spree XT provides a location for anchoring of an Invacare-provided
pelvic belt. This belt has been tested in accordance with ANSI/RESNA WC-19.
I. The wheelchair anchored pelvic belt is supplied by Invacare.
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44035-4190
(800) 333-6900
Canada
570 Matheson Blvd. E.
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
(800) 668-5324
Invacare, Yes, you can. and the
Blue Medallion Design are
registered trademarks and
Quick Set is a trademark of
Invacare Corporation.
Specifications are subject to
change without notification.
Accessories and seating
products shown in the
photographs are not
necessarily included
in the base price
of wheelchair. Refer
to current price list located at
www.invacare.com
© 2006
Invacare Corporation
Form No. 03-070 Rev. 04-06
Specifications
‘‘Invacare says ‘
Yes, you can,
®
’ and
I couldn’t have said it
better myself.’’
Invacare®Spree XT Wheelchair
Loading...