Invacare 3045, 1164, 3040, 3046 User Manual

Head and Torso Supports

Assembly, Installation and Operating Instructions

Model Nos. 1164, 3040 (Torso Supports) and Model Nos. 3045, 3046 (Head Supports)

SAVE THESE INSTRUCTIONS

SAFETY SUMMARY

WARNING/CAUTION notices as used in this manual apply to hazards or unsafe practices which could result in personal injury or property damage.

NOTICE

The information contained in this document is subject to change without notice.

WARNING

DO NOT install, maintain or operate this equipment without reading, understanding and following the proper instructions otherwise injury or damage may result.

Make certain ALL screws, bolts and nuts are tight at all times.

PARTS LIST

REF. PART NO. PART NO. NO. (BLACK) (CHROME) DESCRIPTION

1* 04529x040 04529x040 Headrest/Torso Pad Assembly 2 1025716 40163x008 Panhead Screw 3* 04529x043 04529x043 Torso Bracket Cover 4 03018x012 03018x012 Support Rod 5 03018x016 03018x016 Torso Support Bracket 6 1028841 60284x001 Socket Screw 7 1028758 03018x043 Bracket Clamp (RH) 7 1028759 03018x046 Bracket Clamp (LH) 8 03018x041 03018x041 Pad Support Sub-Assembly 9 03018x042 03018x042 Adjustment Bracket Assembly

(Model No. 3045 Only) 10 1031026 11232x009 Lug Screw 11 1025730 60264x001 Locknut 12 03018x045 03018x045 Pad Support Sub-Assembly

(Model No. 3045) 13 03018x044 03018x044 Pad Support Sub-Assembly

(Model No. 3046)

NOTE: Items with (*), upholstery style and color MUST BE supplied with Part No. when ordering replacement parts.

INSTALLATION

HEAD SUPPORTS MODEL NOS. 3045 AND 3046 (FIGURE 1)

1. Mount the headrest support to the back upright of the chair; which includes the following items:

Headrest/Torso Pad Assembly (Item 1) Panhead Screw (Item 2) Pad Support Sub-Assembly (Item 12 or 13) Socket Screw (Item 6)

Part No. 1026310 Head and Torso Supports

Bracket Clamp (Item 7) Adjustment Bracket Assembly (Item 9) Lug Screw (Item 10) Locknut (Item 11)

2. LEFT or RIGHT adjustments can be accomplished by loosening the socket screw (Item 6) on the adjustable bracket assembly (Item 9 - Model No. 3045) (Item 7 - Model 3046) with an Allen wrench.

3. UP or DOWN adjustment are made by loosening the lug screw and the locknut (Items 10 and 11).

4. FRONT and BACK adjustments are made by loosening the socket screw (Item 6) on the bracket clamp (Item 7 - Model No. 3045 Only).

Front or Back

Adjustment

Up and Down

Adjustment

MODEL NO. 3045 NON-RECLINER

HEAD SUPPORTS

Left

or Right

MODEL NO. 3046 RECLINERS W PILLOW

Left

or Right

Adjustment

Up and Down

Adjustment

FIGURE 1 - INSTALLATION OF HEAD SUPPORTS

TORSO SUPPORTS MODEL NOS. 1164 AND 3040 (FIGURE 2)

1. Mount the torso support to the back upright of the chair; which includes the following items:

Headrest/Torso Pad Assembly (Item 1) Panhead Screw (Item 2) Torso Bracket Cover (Item 3) (Model No. 1164 - Only) Support Rod (Item 4) Socket Screw (Item 6) Torso Support Bracket (Item 5) Pad Support Sub-Assembly (Item 8) Bracket Clamp (Item 7) Lug Screw (Item 10) Locknut (Item 11)

2. LEFT or RIGHT adjustments can be accomplished by loosening the socket screw (Item 6) on the bracket clamp (Item 7 - Model No. 3040 and the support rod (Item 4 - Model No. 1164) with an Allen wrench.

NOTE: The support rod (Item 4) MUST BE assembled to the torso support bracket (Item 5) before installation of Model No. 1164.

Head and Torso Supports 2 Part No. 1026310

+ 1 hidden pages